Manuale d’uso / di manutenzione del prodotto D16 del fabbricante Korg
Vai alla pagina of 24
1 E Upgrade Guide.
i T able of Contents Introduction ................................................................................................. 1 About this manual ...................................................................................................
1 Introduction This manual explains the new functions and improve- ments that have been added to the D16 in V ersion 2. Since the explanations are given in or der of the contents of the “D16 Owner ’s Manual,” you will need to read this manual in conjunction with the “D16 Owner ’s Manual.
2 T empo map creation (specification change) When you create a tempo map in the [TEMPO/ RHYTHM] “TmpMap” tab page, you can now specify the beginning and end measures of the tempo map, making it easier to manage the tempo map by mea- sures. An “Insert” button has also been added, making it easier to edit a previously-cr eated tempo map.
3 Basic operation In “2. Naming a song,” step 3 has been changed as fol- lows. 2. Naming a song 3 Change the name of the song. Use the “ ” “ ” buttons to move the cursor to the location of the character that you wish to change, and rotate the [V ALUE] dial to modify the song name.
4 Change the “T empo map” explanation in “Setting the tempo.” T empo map T empo Map switches the tempo, time signature, and rhythm pattern at the specified measur e. 1 Specify T empo Map as the tempo source. • Select the [TEMPO/RHYTHM] “SetUp” tab page.
5 Reference The symbol indicating foot switch polarity has been changed to “ ”. P1 Control: Foot switch/Control change device (pedal/MIDI) setting 1. Pol (FootSwPolarity) ......................................... [–, +] Specifies the polarity of the foot switch.
6 1. Select MIDISync Mode ............................................. [MTC Mstr , MTC Slave, Clock Mstr , Of f] Select the synchronization messages that will be trans- mitted and received fr om the MIDI IN/OUT connec- tors. MTC Mstr : The D16V2 will function as the master device for MTC 30 NDF (MIDI time code 30 non-drop frame) messages.
7 On the MTC slave D16V2, you must make sure that the [AUTOPUNCH] “AtPunch” tab page “AutoPunch” parameter and the [LOOP] “Loop” tab page “Loop” parameter are both turned “ Of f .” D8 backup data can now be restor ed into the D16V2.
8 Fade T rack and Normalize T rack have been added as edit types. EditT ype: “FadeT rack” This command creates a fade-in or fade-out in the IN – OUT region of the fade-in destination track (“Dest- T rack”) data. When this is executed, the audio data of the IN – OUT r egion will be smoothly faded in toward the level at the OUT location.
9 The time requir ed by this editing operation (i.e., before the “Completed” display appears) will take proportionally longer as the specified range ( IN – OUT ) is longer .
10 2a. Pr vw ................................................................ Y ou can preview the first two seconds of the selected W A V file. If you select a W A V file of an unsupported format, one of the following error messages will appear . SAMPLE RA TE NOT 44.
11 6 Specify the TO time location. ( → D16 p.70) 7 Select Copy . In the [TRACK] “EditT rk” tab page, set “EditT ype” to “Copy T rack.” 8 Select the clipboard as the copy source track num- ber . For “SourceT rack,” select “Clip 1.” The number indicates the number of tracks in the clipboard.
12 Expor ting to a W A V file Here’s how the IN – OUT range of tracks 1 and 2 from song 001 can be exported to a SCSI-connected DOS for- mat external drive “A:DOS” as a stereo W A V file named “Sound001.wav .” 1 Select song 001. 2 Assign the IN and OUT time locations.
13 1. SceneRead ................................................ [On, Of f] This turns scene playback on/off. On : Scenes will be played back. The mixer settings will change automatically when play- back reaches the time location at which a scene was r eg- istered.
14 recalled even after storing the scene. If the filter is enabled, you can disable recall of scene data even after storing the scene. 9. Recall ..................................................................... This recalls the settings that wer e stored in a scene.
15 P2 TmpMap: T empo map editing By specifying tempo maps you can change the tempo, time signature, and r hythm pattern while recor ding or playing a song. Changes in tempo, time signature, and r hythm can be placed only at the beginning of each measure.
16 Refer to the D16 Owner ’s Manual for details on 1–4. 5. Level ................................ [99 Level, 8 Level, 1 Level] Specifies the undo level. The data will be saved for the specified number of previously-executed operations. Y ou can select the undo level from 99, 8, or 1 opera- tions.
17 Part of the operation of the [FF] and [REW] keys has been changed. These keys perform recor der operations such as play- back and recor ding. Refer to the D16 Owner ’s Manual for details on 4–6. 1. [FF] key When stopped or playing, this key moves forward in time (fast-forward).
18 This section explains how the D16V2 manages disk capacity . For explanatory purposes, we will assume that you have recor ded a song with the following structure. It is not necessary that the Optimize T rack opera- tion explained here be used fr equently .
19 Example 3 Suppose that you recor ded A and B on track 1 as the first take. Then you overwrote the Intr o, A ’, B’, and Solo as take 2. In this case, the take 1 data for A and B will remain underlying A ’ and B’ of track 1.
20 4 Begin recording. Press the [PLA Y] key of the D16V2 to begin play- back, and the external MIDI sequencer will begin recor ding in synchronization.
21 MIDI implementation chart Consult your local Korg distributor for mor e information on MIDI IMPLEMENT A TION. Variable Range MIDI Implementation Chart Basic Channel Default Changed Aftertouch Pitch.
KORG INC. 15 - 12, Shimotakaido 1 - chome, Suginami-ku, Tokyo, Japan. 2000 KORG INC. 1208 CTH Printed in Japan NOTICE KORG products are manufactured under strict specifications and voltages required by each country. These products are warranted by the KORG distributor only in each country.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Korg D16 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Korg D16 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Korg D16 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Korg D16 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Korg D16, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Korg D16.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Korg D16. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Korg D16 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
