Manuale d’uso / di manutenzione del prodotto KV-MRD900 del fabbricante ANUBIS
Vai alla pagina of 40
LVT1341-001B [E] 9-INCH WIDESCREEN MONITOR WITH DVD PLAYER KV-MRD900 INSTRUCTIONS • This system cannot receive television broadcasts. Use the separately sold TV tuner unit KV-C1001 for optional television broadcast reception. For installation and connections, refer to the separate manual.
2 ENGLISH CAUTION: This monitor should be used on DC 12 V only. To prevent electric shocks and fire hazards, DO NOT use any other power source. Installation requires some special knowledge. Do not install the monitor yourself. Consult a dealer having special knowledge of this kind for safe and reliable installation.
3 ENGLISH This product incorporates copyri ght protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
4 ENGLISH How to read this manual The following methods are used to make the explanations simple and easy-to-understand: • Some related tips and notes are explained in “ More about this monitor ” (see pages 33 – 35). • Button operations are mainly explained with the illustrations as follows: Press briefly.
5 ENGLISH DVD/VCD/JPEG special functions ... 21 Selecting audio languages ..................... 21 Selecting subtitles .................................. 21 Selecting the multi-angle views ............. 21 Disc menu operations ........................
6 ENGLISH Precautions During the summer, temperatures can reach as high as 100 ° C. +80 ° C –20 ° C –20 ° C to +80 ° C The red spots, blue spots and green spots on the panel surface are a normal characteristic of liquid crystal panels, and not a problem.
7 ENGLISH Widescreen monitor 1 (standby/on) buttons • Turns on the power if pressed. • Turns off the power if pressed and held. 2 Remote sensor 3 Dome light switch • See “ To activate the door sensor ” on page 12.
8 ENGLISH Remote controller — RM-RK230 Remote sensor Main elements and features MONITOR CONTROL 1 (standby/on) button • Turns on the power if pressed. • Turns off the power if pressed and held. 2 MODE button • Selects the playback source. 3 ASPECT button • Changes the aspect ratio of the screen.
9 ENGLISH DVD/RECEIVER CONTROL 6 Receiver control buttons* 1 • (standby/on attenuator) button • SOURCE button • BAND button • DUAL button • VOL + / – (2nd VOL + / – ) buttons 7 TOP M (menu) button* 2 • Displays the DVD and VCD* 3 disc menu.
10 ENGLISH You can listen to the playback sounds with cordless headphones — KS-HP2. Installing the batteries CAUTIONS: • The supplied batteries are not rechargeable.
11 ENGLISH Preparation Before operating the unit, make sure that all external components are correctly connected and installed. 1 Open the liquid crystal panel. Press PUSH-OPEN until the liquid crystal panel is unlocked, then open the liquid crystal panel by both hands.
12 ENGLISH 2 Turn on the power. 3 Select the playback source. Each time you press the button, the playback source changes as follows: 4 Operate the playback source you selected. To operate the built-in DVD player, see “Disc operations” on page 18.
13 ENGLISH Using the monitor menu You can make your own display or sound adjustments using the menu. • For the adjustable items, see the next page. The Remote controller — RM-RK230 has two MENU buttons. In this section, using MENU button at MONITOR CONTROL.
14 ENGLISH Adjustable items on the monitor menu BRIGHT: Adjust this if the picture is too bright or too dark. • Adjustable range: – 10 to +11 • Initial level: 0 (center) CONTRAST: Control the degree of difference between the lightest and darkest parts of the picture.
15 ENGLISH Changing the aspect ratio You can select an appropriate aspect ratio for the playback video signals. Basic procedure Each time you press the button, aspect ratio change. Changeable aspect ratio When incoming 16:9 video signal: FULL: Pictures are fully shown on the screen.
16 ENGLISH When incoming 4:3 video signal: FULL: Pictures are enlarged horizontally and are fully shown on the screen. NORMAL: Pictures are shown at the center of the screen. • The black bars will be shown at the left and right sides of the screen. JUST: Pictures are enlarged horizontally.
17 ENGLISH Playable discs Caution for DualDisc playback • The Non-DVD side of a “DualDisc” does not comply with the “Compact Disc Digital Audio” standard. Therefore, the use of Non- DVD side of a DualDisc on this product may not be recommended.
18 ENGLISH The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its internal program). If the current disc is an audio CD, CD Text, MP3/WMA, JPEG, or VCD without PBC, all tracks will be played repeatedly until you change the source or eject the disc.
19 ENGLISH Operations Next operation To stop play temporarily Playback pauses. • For JPEG discs: pressing ENTER will also pause the picture on the monitor. A still picture appears. A Frame by frame playback B Slow motion playback • No sound comes out during Slow Motion Playback.
20 ENGLISH To locate a particular title/chapter/ track directly • For DVD: During play or pause — select a chapter. During stop — select a title. • For VCD: While PBC (see page 22) is not in use. • For MP3/WMA/JPEG: Select a track within the same folder.
21 ENGLISH Selecting subtitles You can select the language of the subtitle to be shown on the monitor. • You can set the initial subtitle language using the setup menu (see page 29). Ex.: When the disc has 3 options Selecting multi-angle views You can view the same scene at different angles if the disc has multi-angle views.
22 ENGLISH Canceling the PBC playback 1 2 Select a track to start normal playback using the number buttons (see page 9). To resume the PBC function Zoom in 1 • For JPEG disc (effective only when pausing): 2 Move the zoomed-in portion. • For JPEG files: You cannot move the zoomed-in position when the entire picture is displayed on the monitor.
23 ENGLISH About the On-Screen Bar You can check the disc information and use some functions through the on-screen bar. • For audio CD, CD Text, and MP3/WMA/ JPEG disc you can also use the control screen and list screen (see pages 26 and 27).
24 ENGLISH Basic on-screen bar operations 1 Display the on-screen bar. • For DVD/VCD: • For other discs: When a JPEG disc is loaded, skip to step 3 .
25 ENGLISH INTRO You can play the first 15 seconds of all tracks in the disc, or in the current folder (only for MP3/ WMA). VCD (while PBC is not in use): (Canceled) INTRO MP3/WMA: INTRO TRACK INTRO F.
26 ENGLISH To select a folder or track 1 Select “ Folder ” column or “ Track ” column on the control screen. 2 Select a folder or track. • If playback does not start, press 3 or ENTER. • For JPEG discs: Pressing ENTER will pause the selected picture on the monitor.
27 ENGLISH For MP3/WMA/JPEG: While stop... 1 Display the folder list. Each time you press the button, the list screen comes on and goes off. 2 Select a folder on the list. The track list of the selected folder appears. To go back to the folder list 3 Select a track on the list.
28 ENGLISH You can store the initial disc playback status. • While playing, no change can be made on the setup menu. • When shipped from the factory, the on-screen language is set to English. To change the language, see page 29. Basic setting procedure While stop.
29 ENGLISH To be continued.... LANGUAGE menu Item Contents MENU LANGUA GE Select the initial disc menu language. AUDIO LANGU AGE Select the initial audio language. SUBTITLE Select the initial subtitle language or erase the subtitle (OFF). ON SCR EEN LANGUAGE Select the language for the setup menu and some indications shown on the monitor.
30 ENGLISH AUDIO menu Item Contents DIGIT AL AUDIO OUTP UT Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal. For details, see page 36. • PCM ONLY : Select this when connecting an amplifier or a decoder incompatible with Dolby Digital, DTS, MPEG Audio, or connecting to a recording device.
31 ENGLISH How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges.
32 ENGLISH Language codes Code Language Code Language Code Language AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DZ EL EO ET EU FA FI FJ FO FY GA GD GL GN GU HA HI HR HU HY IA IE Afar A.
33 ENGLISH More about this monitor Basic operations Turning off the power • If you turn off the power while listening to a disc, disc play will start automatically, next time you turn on the power.
34 ENGLISH • This unit can play back the files recorded in VBR (variable bit rate). The files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time. Especially, after performing the search function, this difference becomes noticeable.
35 ENGLISH • Even if you try to pause the current picture, it may be skipped, then the next picture will pause. • This unit can recognize the total of 1100 files, 250 folders (maximum of 999 files per folder). Changing the source • If you change the source, playback also stops (without ejecting the disc).
36 ENGLISH About sounds reproduced through the terminals • Through the analog terminals (AV-OUT/cordless headphones): 2-channel signal is emitted. When playing a multi-channel encoded disc, multi-channel signals are downmixed. (AUDIO — DOWN MIX: see page 30.
37 ENGLISH Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies General • Colored spots (red, blue and green) appear on the screen. This is a characteristic of liquid crystal panels and is not a malfunction.
38 ENGLISH Symptoms Causes Remedies Disc playback • Sound and picture are sometimes interrupted or distorted. You are driving on rough roads. Stop playback while driving on rough roads. Disc is scratched. Change the disc. Connections are incorrect. Check the cords and connections.
39 ENGLISH Specifications WIDESCREEN MONITOR Screen: 9 inch liquid crystal panel Number of pixel: 336 960 pixels (480 vertical × 234 horizontal × 3) Drive method: TFT (Thin Film Transistor) active matrix format Cordless audio: Infrared audio transmitter L-channel: 2.
© 2005 Victor Company of Japan, Limited EN, GE, FR, NL 0305MNMMDWJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il ANUBIS KV-MRD900 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del ANUBIS KV-MRD900 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso ANUBIS KV-MRD900 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul ANUBIS KV-MRD900 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il ANUBIS KV-MRD900, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del ANUBIS KV-MRD900.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il ANUBIS KV-MRD900. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo ANUBIS KV-MRD900 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
