Manuale d’uso / di manutenzione del prodotto SX-18D del fabbricante Keyspan
Vai alla pagina of 29
USER MA NUAL Model : SX-18D (Version 1.0).
.
Table of Content Introduction 1. FUNCTIONAL DESCRIPT ION 2 1.1 Buttons 2 1.2 LED Indicat ion 2 1.3 LCD Display 1.4 Connector s 2 2. PRODUCT SPECIF ICATIONS 3 2.1 Technical Specif ication 3 2.2 Electr ical Spec ifica tion 3 2.3 Product Specifi cation 3 2.
.
INTRODUCTION STORXtreme is an integrated solution that provides external hard disk drive, card read er and memory card backup fun ctions. As a portable external storage device, STORX treme i s a perf ect choice for active mobile users providing a light and optimal solution for personal information storage and t ransfer.
Chapter 1 : FUNCTIONAL DESCRIPTION This section describe the various parts and fun ctions of the device. You may refer to Chapter 3 : User Int erface Des cription for detail description.
Chapter 2 : PRODUCT SPECIF ICATIONS 2.1 Technical Sp ecification Copy mode Data Transfer Rate CF to HDD : 3 MBps SD to HDD : 2.5MBps (2x) , 3.4MBps (u ltra speed) MMC to HDD : 1 MBps MS to HDD : 0.5 MBps MS Pro to HDD : 3.5 MBp s USB Transfer Rate This is a high spe ed USB dev ice.
2.5 Bundled Accessories USB cable Installatio n CD Quick Installation Guide User Manual 4.
Chapter 3 : USER INTERFACE DESCRIPTION 3.1 Button Description Button Activatio n Operation Mode Description [POWER/ SELECT] Press Hold Sta ndalone P ress and hold t his button for 3 second s to power O N/OFF the device. [POWER/ SELECT] Press Standal one Press to select the operations (e g.
3 . 3 C o n n e c t o r s D e s c ri p t i o n 3.3.1 Mini USB connector Plug in the mini USB cable into this connector and the other end of the cable to the PC or the notebook’s USB port. Use the mini USB cable that bundle with this device. The device is compliance to USB 2.
3.3.4 44-pin Connector Install the 1.8 ” Hard disk drive into this connector as shown in the picture below. Ensure that the hard disk drive is connected in the corr ect direction. 3.3.5 Battery Compartment Select the type of AA battery used : Alkaline or NiMH Rechargeable B att eries.
Chapter 4 : DEVICE OPERATION 4.1 Standalone Mode (Copy ) Step 1 : Power ON the device by pressing [P OWER] button for 3 seconds. The LCD will turn on, the { INSERT CARD} icon will flash prompting you to in sert a Memory Card. Step 2 : Insert the memory card (eg.
If an error occurs during cop y, the [ERROR] icon will appear on the LCD, y ou may then repeat the copy sequence. When a copy error oc curs, the sub-folder created in the [F ILE] directory is empty, yo u may ignore and delete it.
Chatper 5 : WI NDOWS 98SE /ME INSTALL ATION 5.1 Operating System Supported § Windows 98 Second Edition (SE) or Windows Millennium Edition (ME) § The device driver c an be found in the “Win98SE Driver” directory in the Installation CD 5.2 Install Device Driver on Wind ows 98 SE / ME § Connect the device to PC via USB connection.
- Select the directory path “ F:Win98SE drive r ” (where F : is yo ur CD-ROM drive) and clic k Next - Follow through the online instruction … User Manual 11.
§ Upon installation of the device driver, you will notice 3 ic ons appear on the “M y Computer” screen. Refer th e section on “Installing ne w hard disk on Win98SE / M E & co nfigure new h ard disk drive in Win98SE / ME” if user do not see your ha rd disk d rive icon.
5.5 Installing New HDD on Windows 98S E / ME § When a new HDD is installed to this device, Windows 98SE or ME cannot recognize it as local drive becaus e the new HDD does not contain the Master Boot Record and Primar y Partition Record information.
- Check that INSTEP EzII DRIVE0 is present, - Click on the Start, Program, Accessories and select MS-DOS prompt item, User Manual 14.
- Typ e FDISK in the MS-DOS prompt dialog box, - If you cannot g et to this screen, reboot the sy stem and try again. Type < Y > to enable large disk support.
- 1~3 will depend on the number of HDD pr esent in the computer. Since 20GB HDD is used in this example, enter the choice < 2 > to chan ge the current fixed disk drive.
- Enter < Y > to create Primary D OS partition on current fixed disk drive 2, - Enter < Y > to use maximum available size for a Primary D OS partition, - Press [ ESC ] after Primar y DOS p.
- Press [ ESC ] to exit fdisk, you must then Reboot the computer. 5.7 Format New HDD in Wind ows 98SE / ME - You must reboot the computer after pe rform fdisk.
- Choose the Full for “Format typ e” , - You will notice the new HDD is formatting , - Reboot the computer ag ain to let the OS initialize th e new formatted HDD.
Chapter 6 : WI NDOWS 200x / XP INSTALLATION 6.1 Operating System Supported § Windows 2K & Windows XP § Supported by Microsoft default driver. (Requires service pack from Microsoft Windows Update website) 6.2 Verify window s has properly installed the device driver § Connect the device to PC via USB connection.
6.4 Create Master Boot Record on the new hard disk. - Log in the PC as Administrator , - Click on the My Computer icon by right-click on the mouse and choose the Manag er item, - Or click on the Control Panel icon and follow by Administrative tools .
- Click Next in the write signature prompt and Upg rade Disk wizard prompt, - Tick on Disk 1 option and follow through the instruc tion, - The new HDD will cr eate a Master Boot Record on the new hard disk, - Proceed to crea te a new primary partition.
6.5 Create Primary Partition Record on t he new hard disk. - After the HDD h as created Master Boot Record (w rit e signature), you nee to create a primary partition on your new hard di sk. - Click on the Disk 1 Unallocated bar by right-click of the mouse.
- Choose the Primary partition option and let system assign the drive letter , User Manual 24.
- Choose the FAT32 format, Default allocation unit size and follow through the on-scre en instruction. - Note : Do not choose NTFS because the dev ice Standalone Copy Mode support only FAT or FAT32 format. - The new HDD is fo rmatted and ready to be used.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Keyspan SX-18D è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Keyspan SX-18D - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Keyspan SX-18D imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Keyspan SX-18D ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Keyspan SX-18D, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Keyspan SX-18D.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Keyspan SX-18D. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Keyspan SX-18D insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
