Manuale d’uso / di manutenzione del prodotto VRS-6100 del fabbricante Kenwood
Vai alla pagina of 40
B60-5484-00 00 MA ( K, P ) 0403 AUDIO VIDEO SURROUND RECEIVER VRS - 6100 INSTRUCTION MANUAL KENWOOD CORPORA TION About the supplied remote control Compared to standard remote controls, the remote control supplied with this receiver has several operation modes.
2 EN Units are designed for operation as follows. Before applying power Caution : Read this page carefully to ensure safe operation. U.S.A. and Canada .
3 EN Before applying the power How to use this manual This manual is divided into four sections, Preparations, Operations, Remote Control, and Additional Information. Preparations Shows you how to connect your audio and video components to the receiver and prepare the surround processor.
4 EN Before applying the power Special features True home theater sound • ~ ª This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your video software.
5 EN Before applying the power Contents Caution : Read the pages marked carefully to ensure safe operation. Before applying power ........................................... 2 Safety precautions ............................................... 2 How to use this manual .
6 EN 6 5 4 3 27 8 9 0 1 @ ! # % $ ^ Standby mode While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition, the system can be turned ON by the remote control unit.
7 EN Remote control unit Names and functions of parts 1 Numeric keys ¶› If CD or MD is selected as the input source, these keys function as numeric keys. If tuner is selected as the input source, these keys are used to call up station presents. 2 LOUDNESS key £ Use to switch the status of LOUDNESS.
8 EN Input mode settings DVD, VIDEO and FRONT AUX inputs each include jacks for digital audio input and analog audio input. The initial factory settings for audio signal playback for DVD, VIDEO and FRONT AUX are full auto. After completing connections and turning on the receiver,follow the steps below.
9 EN L IN VIDEO IN DVD AUX IN R L MONITOR DIGIT AL IN OPT . COAXIAL VIDEO DVD Setting up the system Connecting a DVD player If you have connected a DVD player to the receiver with digital connection, be sure to read the " Input mode settings " section carefully.
10 EN Setting up the system AUX IN R L MONITOR REC OUT PLA Y IN REC OUT PLA Y IN VIDEO IN VIDEO OUT VIDEO Video deck, Cassette deck or MD recorder Audio components Monitor TV VIDEO IN (Yellow RCA pin .
11 EN R L DIGIT AL IN OPT . COAXIAL VIDEO DVD Digital connections The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals.
12 EN Connecting the speakers Setting up the system R L SPEAKERS RL RL C SURR FRONT (8-16 Ω ) Front Speakers Surround Speakers Be sure to connect both surround speakers Center Speaker Right Left Right Left Whether each speaker is connected properly can be confirmed by outputting the test tone and checking if each speaker channel outputs audio.
13 EN Speaker placement Front speakers : Place the left and right speakers at each side of your TV. Angle the speakers towards the listening area to enhance the stereo effect. Center speaker : Place front and center. This speaker stabilizes the sound image and helps recreate sound motion.
14 EN Setting up the system PRE OUT connections R L SURROUND BACK PRE OUT R L SUB WOOFER ¶ Connecting a speaker cord directly to a PRE OUT jack will not produce any sound from the speaker. Power amplifier Power amplifier Powered subwoofer Subwoofer Surround Back speakers L R The receiver has additional PRE OUT jacks.
15 EN ANTENNA AM GND FM 75 Ω Setting up the system Connecting the antennas AM loop antenna The supplied loop antenna is for use indoors. Place it as far as possible from the receiver, TV set, speaker cords and power cord, and adjust the direction for best reception.
16 EN Let’ s play DVD video software STEP 1 Connect the speakers and TV to the receiver. Connection of TV monitor: 1 Composite video connection Connection of DVD player: 1 Composite video connection.
17 EN SETUP POWER ON/STANDBY MUL TI CONTROL @ / # INPUT SELECTOR 1 Press to select "DVD". 2 Start playback of the DVD player. For the operation, also refer to the instruction manual for your DVD player. ÷ You can select various listen modes to enjoy surround playback of various kinds of video software.
18 EN Preparing for playback SETUP POWER ON/STANDBY MUL TI CONTROL @ / # SETUP MULTI CONTROL % / fi POWER Speaker settings To enable you to obtain optimum enjoyment from the receiver ’ s listening modes, make sure to complete the speaker settings (Subwoofer, Front, Center, Surround and Surround Back speakers) as described below.
19 EN Preparing for playback 6 Use the MULTI CONTROL button (or the MULTI CONTROL % / fi keys) to select the appropriate front speakers setting. 1 " FRNT LRG": Large front speakers are connected to the receiver. 2 " FRNT NML ": Average size front speakers are con- nected to the receiver.
20 EN 5 Adjust the speaker volume level. From your usual listening position, adjust the volume levels. The volume levels from each speaker should be the same. ÷ In steps 5 , indications appear only for the selected channels of the speakers that require adjusting.
21 EN Preparing for playback Input level adjustment (analog sources only) If the input level of an analog source signal is too high, the " CLIP " indicator will blinks to indicate the source signal. Adjust the input level. 1 Press the RECEIVER key on the remote control unit to set it to the receiver control mode.
22 EN Normal playback Listening to a source component 1 Press the INPUT SELECTOR key (or the Input selector keys/ DVD, VIDEO, AUX, F.AUX, TUNER) to select the source you want to listen to.
23 EN Normal playback Adjusting the sound VOLUME CONTROL PHONES MUL TI CONTROL @ / # ACTIVE EQ ACTIVE EQ VOLUME MUTE BASS BOOST MULTI CONTROL % / fi TONE LOUDNESS Adjusting the TONE (PCM stereo and analog stereo mode only) 1 Press the RECEIVER key on the remote control unit to set it to the receiver control mode.
24 EN Normal playback Muting the sound The MUTE key lets you mute the sound of the speakers or headphones. Press the MUTE key. To cancel Press the MUTE key again so that the "MUTE" indicator goes off. ÷ MUTE ON can also be deactivated by turning the VOLUME CONTROL knob or pressing the VOLUME +/ – keys.
25 EN 3 Press and hold the DIMMER key for more than 2 seconds to select the AUTO REC or MANUAL REC mode. 1 REC mode off 2 " A-REC ": AUTO REC mode 3 " M-REC ": MANUAL REC mode When.
26 EN Listening to radio broadcasts AUTO/MONO BAND INPUT SELECTOR MUL TI CONTROL @ / # TUNING 1 / ¡ TUNER MULTI CONTROL % / fi AUTO 7 BAND T uning radio stations 8) 8) The receiver can store up to 40 stations in the memory and recall them by one-touch operation.
27 EN Listening to radio broadcasts Receiving preset stations INPUT SELECTOR TUNER 1 Use the INPUT SELECTOR key (or the TUNER key) to select tune as the source.
28 EN Ambience effects This receiver is equipped with listening modes that allow you to enjoy an enhanced sonic ambience with a variety of video sources. In order to obtain the optimum effect from the surround modes, make sure to input the proper speaker settings beforehand.
29 EN Ambience effects DTS-ES The DTS-ES (Digital Theater System-Extended Surround) represents 6.1-channel Discrete Surround format, expanding upon 5.1 surround. DTS-ES format is a 6.1 channel sound system for movie theaters that includes an additional surround center channel matrixed within sur- round left and surround right.
30 EN Ambience effects INPUT SELECTOR LISTEN MODE LISTEN MODE Preparations ÷ Turn ON related components. ÷ Complete " Preparing for playback " (speaker settings) . * ÷ Use the INPUT SELECTOR key (or Input Selector keys) to select the component you wish to play back with surround sound.
31 EN Ambience effects Main example of medium: Digital sources including DVD linear PCM and CD. Analog source such as VCR or radio broadcasting. 1 " PL II x MOVIE ": DOLBY PRO LOGIC II x sur.
32 EN MULTI CONTROL @ / # INPUT SELECTOR MULTI CONTROL % / fi SOUND 1 Press the RECEIVER key on the remote control unit to set it to the receiver control mode.
33 EN Convenient functions Center Width mode (Only when the input signal is a 2-channel signal in the DOLBY PRO LOGIC II x MUSIC or DOLBY PRO LOGIC II MUSIC mode) Center width adjustment allows you to.
34 EN Basic remote control operations for other components DVD player operation keys The remote control of this unit can control two groups of KENWOOD DVD players directly without using the remote control supplied with the DVD player.
35 EN In case of difficulty Amplifier Symptom Resetting the Microcomputer The microcomputer may malfunction (unit cannot be operated, or shows an erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor.
36 EN In case of difficulty ÷ Press the input selector key and select the optimum control mode. ÷ Replace with new batteries. ÷ Point the remote control unit to the remote sensor of the receiver.
37 EN Specifications Notes 1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
38 EN MEMO *5484/35-40/EN 04.5.17, 8:34 AM 38.
39 EN *5484/35-40/EN 04.5.17, 8:34 AM 39.
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kenwood VRS-6100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kenwood VRS-6100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kenwood VRS-6100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kenwood VRS-6100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kenwood VRS-6100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kenwood VRS-6100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kenwood VRS-6100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kenwood VRS-6100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
