Manuale d’uso / di manutenzione del prodotto KRF-V5100D del fabbricante Kenwood
Vai alla pagina of 36
KRF-V6100D KRF-V5100D B60-5632-00 00 MA (E, X) AP 0602 About the supplied remote control Compared to standard remote controls, the remote control supplied with this model has several operation modes. These modes enable the remote control to control other KENWOOD DVD players.
2 EN Before applying power How to use this manual This manual is divided into four sections, Preparations, Operations, Remote Control, and Additional Information. Preparations Shows you how to connect your audio and video components to this model and prepare the surround processor.
3 EN EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE GROUNDING CONDUCTORS (NEC SECTION 810-21) ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) GROUND CLAMP ELECTRIC SERVICE EQUIPMENT GROUND CLAMPS Notes 1. Item 7 is not required except for grounded or polarized equipment.
4 EN Contents Caution : Read the pages marked carefully to ensure safe operation. Preparations Operations Additional Information Remote Control Operating range (Approx.) Remote sensor Infrared ray system Operation When the STANDBY indicator is lit, the power turns ON when you press the RECEIVER key on the remote control unit.
5 EN DSP surround modes The DSP (Digital Signal Processor) used for this model incorporates a variety of high quality adjustable sound fields, like “ARENA”, “JAZZ CLUB”, “THEATER”, “STADIUM” and “DISCO”. It is compatible with almost any kind of program source.
6 EN Names and functions of parts Main unit Standby mode While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition, the system can be turned ON by the remote control unit.
7 EN Names and functions of parts Remote control unit CD/DVD MD/T APE RECEIVER DVD/6CH VIDEO 2 VIDEO 1 DVD SET UP TONE SOUND DIMMER MUL TI CONTROL ACTIVE EQ LISTEN MODE TOP MENU RETURN ON SCREEN MENU ENTER BAND MUTE BASS BOOST LOUDNESS DISC SEL. DISC SKIP REPEA T ANGLE SUBTITLE AUDIO RDS DISP .
8 EN Setting up the system Make connections as shown in the following pages. When connecting the related system components, be sure to refer to the instruction manuals supplied with the components you are connecting. Do not connect the power cord to a wall outlet until all connections are completed.
9 EN CENTER SUB WOOFER SURROUND FRONT VIDEO 1 OUT VIDEO 1 IN VIDEO 2 IN DVD IN MONITOR OUT VIDEO 2 DVD / 6CH CD / DVD COAXIAL OPTICAL DVD / 6CH INPUT VIDEO DIGITAL IN DVD IN Setting up the system SURR.
10 EN Setting up the system Connecting audio components IN OUT IN OUT OUT OUT To AC wall outlet Cassette deck or MD recorder CD or DVD player Video component EUROPE AUX CD / DVD REC OUT PLAY IN VIDEO 1 REC OUT PLAY IN MD / TAPE L R AUDIO CAUTION Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard.
11 EN PLAY IN VIDEO 2 REC OUT PLAY IN VIDEO 1 VIDEO 1 OUT VIDEO 1 IN VIDEO 2 IN DVD IN MONITOR OUT VIDEO AUDIO VIDEO 2 IN DVD IN MONITOR OUT S-VIDEO Video deck Video IN Setting up the system A video component with digital audio outputs should be connected to the VIDEO 2 jacks.
12 EN PLAY IN VIDEO 2 REC OUT PLAY IN VIDEO 1 REC OUT PLAY IN MD / TAPE CD/DVD AUDIO MONITOR OUT YC B C R Y CB CR DVD IN COMPONENT VIDEO VIDEO 2 IN DVD player Setting up the system Monitor TV Video OU.
13 EN VIDEO 2 DVD / 6CH CD / DVD COAXIAL OPTICAL DIGITAL IN Setting up the system Component with DTS, Dolby Digital, or PCM COAXIAL DIGITAL OUT COAXIAL DIGITAL OUT (AUDIO) DOLBY DIGITAL RF OUT (AUDIO).
14 EN CENTER FRONT + - R L RED WHITE GREEN KRF-V5100D SURROUND + - R GRAY L BLUE SURROUND BACK SURROUND + - KRF-V6100D R GRAY L BLUE BROWN SPEAKERS SUB WOOFER PRE OUT PRE OUT SURR BACK L * SURR BACK R.
15 EN GND AM ANTENNA Setting up the system Connecting the antennas The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below.
16 EN Speaker settings To enable you to obtain optimum enjoyment from this model ’ s listening modes, make sure to complete the speaker settings (Subwoofer, Front, Center, Surround and Surround Back speakers) as described below.
17 EN 8 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select the appropriate Surround speaker setting. If you have selected “ LRG ” as the Center speaker setting: 1 SURR NML (normal) : Average size Surround speakers are connected to this model.
18 EN Preparing for surround sound 6 Adjust the speaker volume level. From your usual listening position, adjust the volume levels. The volume levels from each speaker should be the same. • In step 6 and 7 , indications appear only for the selected channels of the speakers that require adjusting.
19 EN Listening to a source component Normal playback A U T O/ M O N O INP U T S ELE C T OR P O WE R ON/OFF SPEAKERS O N /O F F O N /S TANDB Y INPUT SELECTOR VOLUME CONTROL Input Selector VOLUME % / fi The speaker indicator lights up. 1 Use the INPUT SELECTOR knob or keys to select the source you want to listen to.
20 EN Normal playback Adjusting the sound Adjusting the Tone (remote control only) You can adjust the sound quality when this model is in the PCM stereo and analog stereo mode. 1 Press the TONE key to select the Tone mode. 2 Use the MULTI CONTROL knob or MULTI CONTROL % / fi keys to select “ TONE ON ” or “ TONE OFF ” .
21 EN Recording audio (analog sources) INPUT SELECTOR Recording 3 Press and hold the DIMMER key for more than 2 seconds to select the A-REC or M-REC mode during digital input.
22 EN Using RDS (Radio Data System) RDS is a system that transmits useful information (in the form of digital data) for FM broadcasts along with the broadcast signal. Tuners and receivers designed for RDS reception can extract the information from the broadcast signal for use with various functions, such as automatic display of the station name.
23 EN Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number “ 1 ” . Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations.
24 EN Using the RDS DISP . (Display) key RDS DISP. Pressing the RDS DISP. key changes the contents of the display. Each press switches the display mode as follows: 1 PS (Program Service name) display .
25 EN Listening to radio broadcasts Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function.
26 EN Ambience effects Manufactured under license from Dolby Laboratories. “ Dolby ” , “ Pro Logic ” , “ Surround EX ” and the double-D symbol are trademarks of Dolby Laboratories.
27 EN Dolby Digital The Dolby Digital surround format lets you enjoy up to 5.1 channels of digital surround sound from Dolby Digital program sources (such as Laserdisc or DVD software marked ). Compared with previous Dolby surround, Dolby Digital provides even better sound quality, greater spatial accuracy, and improved dynamic range.
28 EN Ambience effects Continued to next page Surround play The DTS compatible models can reproduce a CD, DVD, or LD carrying the DTS mark. Dolby Digital can be used when playing DVD or LD software bearing the mark and Dolby Digital format digital broadcasts (etc.
29 EN Ambience effects DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels and this model, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable.
30 EN Convenient functions DIMMER SOUND MULTI CONTROL DIMMER SOUND MULTI CONTROL % / fi Ambience effects Adjusting the sound You can make further adjustments to the sound while listening to playback in the surround mode. 1 Press the SOUND key until the desired item appears in the display.
31 EN Ambience effects Dimension mode (Pro Logic II X MUSIC mode and Pro Logic II MUSIC mode only) When listening to music with certain recordings, you will also be able to achieve a suitable balance from all the speakers by adjusting the dimension mode.
32 EN DVD player operation keys The remote control of this unit can control KENWOOD DVD players directly without using the remote control supplied with the DVD player.
33 EN Amplifier Cause • The speaker cords are disconnected. • VOLUME is set to the minimum position. • MUTE is ON. • The SPEAKERS switches are set to OFF. • Speaker cords are short-circuited. • The speaker cord is disconnected. • The speaker is not set up correctly.
34 EN In case of difficulty Remote control unit Cause • The remote control is set to the DVD player operation mode. • Batteries are exhausted. • The remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle between this model and the remote.
35 EN Specifications (For Europe) AUDIO section Rated power output during STEREO operation DIN/IEC (63 Hz ~ 12.5 kHz, 0.7% T.H.D., at 6 Ω ) ............................................................................... 100 W + 100 W Effective power output during STEREO operation RMS(1 kHz, 10% T.
36 EN For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kenwood KRF-V5100D è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kenwood KRF-V5100D - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kenwood KRF-V5100D imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kenwood KRF-V5100D ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kenwood KRF-V5100D, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kenwood KRF-V5100D.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kenwood KRF-V5100D. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kenwood KRF-V5100D insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
