Manuale d’uso / di manutenzione del prodotto KDC-X7529 del fabbricante Kenwood
Vai alla pagina of 38
CD-RECEIVER KDC-X7529 INSTR UCTION MANU AL © B64-2985-00/00 (MW) B64-2985-00_M_English_r0.Indd 1 B64-2985-00_M_English_r0.Indd 1 04.11.16 6:44:59 PM 04.
2 | English Con tents Safety precautions 4 Notes 5 About CDs 6 About AA C, MP3 and WMA 7 General featur es 8 Pow er Selecting the Source Volume Attenuator Audio Control Audio Setup System Q Speaker Se.
English | 3 The " AAC" logo is trademark of Dolby Laboratories. B64-2985-00_M_English_r0.Indd 3 B64-2985-00_M_English_r0.Indd 3 04.11.16 6:45:00 PM 04.
4 | English Safety precautions About CD play ers/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players.
English | 5 Notes • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. • P ress the reset button if the disc auto changer fails to operate correctly .
6 | English Handling CDs • Don ’t touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc. on the CD .
English | 7 About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is out of the specification, may not able to be played normally , or the file and folder names may not be display ed correctly.
8 | English General fea tures Powe r T urning ON the P ower Press the [SRC] button. • When the power is ON, the <Security Code> (page 22) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond.
English | 9 Audio C ontrol 1 Select the source for adjustment Press the [SRC] button. 2 Enter A udio Control mode Press the [VOL] knob. 3 Select the Basic Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below .
10 | English General fea tures Audio Setup Setting the Sound system, such as Cross over Network. 1 Select the source for adjustment Press the [SRC] button. 2 Enter A udio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item for adjustment Press the [VOL] knob.
English | 11 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ST ANDBY" display. 2 Enter Speak er Setting mode Press the [VOL] knob. 3 Select the Speaker type T urn the [ VOL] knob.
12 | English General fea tures Switching Displa y Switching the information displa yed. 1 Enter S witching Display mode Press the C ontrol knob for at least 1 second. "DISP SEL " is displayed. 2 Select the Display item Push the Contr ol knob to [ 4 ] or [ ¢ ].
English | 13 Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
14 | English T uner/T V control f eatures T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, F M2, and FM3 bands.
English | 15 F unction of remote Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Ac cess T uning mode Press the [DIRECT ] button on the remote . "– – – –" is displayed.
16 | English T uner/T V control f eatures F unction of LX BUS T elevision TV channel Preset Memory Putting the T V channels in the memory. 1 Select the TV band Press the [F M] button. 2 Select the TV channel to put in the memory Push the Contr ol knob to [ 4 ] or [ ¢ ].
English | 17 CD/Audio file/External disc contr ol features Playing CD & A udio file When there is no disc inserted 1 Open the panel. Press the [ 0 ] button. 2 Inser t a disc. • When the faceplate has been slid open, it might interfere with the shift lever or something else.
18 | English CD/Audio file/External disc contr ol features Playing External Disc Playing discs set in the optional accessory disc player connected to this unit.
English | 19 T rack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or Audio file folder y ou’ re listening to . Press the [REP] button.
20 | English CD/Audio file/External disc contr ol features F unction of Audio file Folder Select Quickly selecting the folder you want to listen to . 1 Enter Folder Select mode Press the [F .SEL] button. "F-SELEC T" is displayed. During Select mode the folder information is displayed as shown below .
English | 21 • The announcement of the initial can be canceled by <Voice Index> (page26). • When the Control knob is pushed to the reverse of [ 4 ] or [ ¢ ] while Letter Seek, the initial is displayed and read by the reversed or der. • When the Letter Seek is started, it cannot be cancelled.
22 | English Menu system Menu Sy stem Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference f or the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 23 In Standby mode Secur ity C ode Because authorization by the Security Code is required when it’ s removed from the vehicle , personalizing this unit is by using the Security Code is a help in preventing theft. • When the Security Code function is activated, it can’t be released.
24 | English Menu system In Standby mode Selectable Illumination Selecting the button illumination color as green or red. Display Setting "KEY GRN" The illumination color is green.
English | 25 When LX AMP unit connecting AMP Con trol Y ou can control the LX AMP connected to the unit. 1 S elect AMP Control mode Push the Contr ol knob to [FM] or [AM]. Select the " AMP CTRL " display. 2 Enter AMP Control mode Press the C ontrol knob for at least 1 second.
26 | English Menu system F unction of ACDrive disc V oice Inde x Setting the announcement during the play of ACDrive disc . Display Setting "V-ID ON" Guide is announced. "V-ID OFF" Not be announced. In CD mode A CDrive firm ware version displa y Displaying the firmwar e version with the ACDrive function.
English | 27 Audio Pr eset Memory Registering the value setup by Sound Contr ol. The memory can' t be erased by the Reset button. 1 S etup Sound Control Refer to the f ollowing operations to setup the Sound Control.
28 | English Basic Operations of r emote Loading and Replacing the battery Use two " AA "-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 29 Audio C ontrol [A UD] button Select the Audio item for adjustment. [VOL] buttons Adjust the Audio item. • Refer to <Audio C ontrol> (page 9) for the operation method, such as the procedures of A udio control and others. • Only selecting and adjusting of the Basic Audio item can be done by the remote control .
30 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Proc edure 1. T o prevent a shor t circuit, remov e the key from the ignition and disconnect the - battery.
English | 31 / ° ÊÊÊ" / 1/ * °" / &2/.4 , &2/.4 2 2%!2 , 2%!2 2 q ³ Connecting W ires to T erminals Fr ont left output ( White) Rear left output ( W.
32 | English Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars Japanese cars 1 Refer to the section <Removing the hard rubber frame> (page 34) and then remove the hard rubber frame.
English | 33 Screwing the F acepla te on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off , screw in the provided screw s in the holes shown below . Accessory 5 Bottom panel • Never insert the screw in any other screw hole than the one specified.
34 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed, r emove the lower two locations.
English | 35 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON.
36 | English Disc source ? " AUX EXT" is display ed without achieving External disc control mode. ✔ Unsupported disc changer is connected. ☞ Use the disc changer mentioned in the <About CD players/disc changers connected to this unit> (page 4) of the section on <Safety precautions>.
English | 37 The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ Load the disc magazine pr operly. No CD in the unit. ➪ Inser t the CD. NO DISC: No disc has been loaded in the disc magazine.
38 | English Specifications subject to change without notice. FM tuner section Fr equency range 50 kHz space: 87.5 MH z – 108.0 MHz 200 kHz space: 87.9 MH z – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV /75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kenwood KDC-X7529 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kenwood KDC-X7529 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kenwood KDC-X7529 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kenwood KDC-X7529 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kenwood KDC-X7529, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kenwood KDC-X7529.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kenwood KDC-X7529. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kenwood KDC-X7529 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
