Manuale d’uso / di manutenzione del prodotto KDC-MP5032 del fabbricante Kenwood
Vai alla pagina of 40
CD-RECEIVER KDC-MP5032 INSTR UCTION MANU AL © B64-3311-00/00 (KW/K0) T ake the time to r ead through this instruction manual. F amiliarity with installation and operation procedur es will help you obtain the best performance from your new CD-receiv er .
2 | English The " AAC" logo is trademark of Dolby Laboratories. B64-3311-00_English_r2.indd 2 B64-3311-00_English_r2.indd 2 05.11.10 8:07:59 PM 05.
English | 3 Con tents Safety precautions 4 Notes 5 About CDs 7 About AA C, MP3 and WMA 8 General featur es 9 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Se.
4 | English Safety precautions Do Not Load 3-in. CDs in the CD slot If you tr y to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit. About CD play ers/disc changers connected to this unit Kenwood disc changers/ CD players released in 1998 or later can be connected to this unit.
English | 5 Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • If the unit fails to operate properly , press the Reset button to restor e factor y settings.
6 | English 2 CAUTION Use of controls or adjustments or performance of procedures other than those specified her ein may result in hazardous radiation exposur e. In compliance with Federal Regulations, f ollowing are repr oductions of labels on, or inside the product relating to laser product saf ety.
English | 7 Handling CDs • Do not touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Do not stick tape etc. on the CD , or use a CD with tape stuck on it.
8 | English About AA C, MP3 and WMA The playable AAC/MP3/WMA file (her eafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is not comforming to the specification, may not play normally , or the file and folder names may not display correctly .
English | 9 General fea tures Powe r T urning ON the Power Press the [SRC] button. T urning OFF the Power Press the [SRC] button for at least 1 sec ond.
10 | English General fea tures Sy stem Q Selecting the best sound setting preset for different types of music. 1 Select the source to set Press the [SRC] button. 2 Select the Sound type Press the [ Q] button. When you press the button once , the current sound setting is displayed.
English | 11 Adjustment Item Display Range Fr ont High Pass F ilter* 2 "HPF" Thr ough/40/60/80/100/120/ 150/180/220 Hz Rear High P ass Filter* 2 "HPR" Thr ough/40/60/80/100/120/ 15.
12 | English General fea tures Switching Displa y Changing the information display ed. 1 Enter S witching Display mode Press the C ontrol knob for at least 1 second. "DISP SEL " is displayed. 2 Select the Display item Push the Contr ol knob towards [ 4 ] or [ ¢ ].
English | 13 Theft Deterrent F aceplate The faceplate of the unit can be detached and taken with you, helping to deter theft. Removing the F aceplate Press the Release button. The faceplate is unlocked, allowing you to detach it. • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
14 | English T uner featur es T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
English | 15 F unction of remote control Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Ac cess T uning mode Press the [DIRECT ] button on the remote control. "– – – –" is displayed.
16 | English CD/Audio file/External disc contr ol features Playing CD & A udio file When there is no disc inserted 1 Open the panel Press the [ 0 ] button. 2 Insert a disc. • When the faceplate slides open, it might interfere with the shift lever or other vehicle function.
English | 17 Pause and play Press the C ontrol knob. Each time you press the knob, the audio pauses or plays. • Disc 10 is displayed as "0" . • The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected.
18 | English CD/Audio file/External disc contr ol features T rack/File/Disc/F older Repeat Replaying the song, disc in the Disc changer or Audio file folder y ou are listening to . Press the [REP] button. Each time you press the button, the Repeat P lay alternates between the modes shown in the tables below .
English | 19 3 Decide the folder to pla y Press the C ontrol knob. The F older Select mode releases, and the Audio file in the folder being displayed pla ys. Cancelling the F older Select mode Press the [F .SEL] button. T ext/Title Scroll Scrolling the displayed CD text, Audio file t ext, or MD title.
20 | English HD Radio control f eatures About HD Radio • When you connect an HD Radio, Tuner featur es of the unit are disabled and changed to HD Radio tuner features.
English | 21 Y ou can continue by returning to step 2 and setting other items. 4 Exit Menu mode Press the [MENU] button. • When other items those applicable to the basic operation method above are display ed, their setting content chart is entered. (Normally the setting listed at the top of the chart is the original setting.
22 | English In Standby mode Deactivating Security Code T o deactivate the Securit y Code function. 1 Select Security Code mode Push the Contr ol knob towards [FM] or [ AM]. Select the "CODE CLR" display . 2 Enter Security Code mode Press the C ontrol knob for at least 1 second.
English | 23 Display Illumination C ontrol This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night. Display Setting "DISP ON" Keeps the display on. "DISP OFF" T urns off the display when you perform no operation for 5 seconds .
24 | English In HD Radio mode Receiv e mode Setting Sets the receive mode . 1 Select the Receive mode Push the Contr ol knob towards [FM] or [ AM]. Select the "HDR MODE" display. 2 Enter Receive mode Press the C ontrol knob for at least 1 second.
English | 25 In Standby mode CD Read Setting When there is a problem with playing a CD with special format, this setting plays the CD b y force. Display Setting "CD READ1" Play CD and Audio file. "CD READ2" Play CD by forc e. • Setting "CD READ2" cannot play Audio file.
26 | English Menu system In Standby mode Demonstration mode Setting Sets the demonstration mode. 1 Select the Demonstration mode Push the Contr ol knob towards [FM] or [ AM]. Select the "DEMO" display. 2 Set the Demonstration mode Press the C ontrol knob for at least 2 seconds.
English | 27 Basic Operations of r emote control Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
28 | English Basic Operations of r emote control Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. • Refer to <Audio C ontrol> (page 10) for the operation method, such as the procedures f or Audio control and others operations.
English | 29 In HD Radio source [FM] button Selects the HD FM band. Each time you press the [F M] button, the band alternates between the HF1, HF2, and HF3 bands. [AM] button Selects the HD AM band. [ 4 ]/ [ ¢ ] buttons T unes up or down bands. [0] — [9] buttons Pr ess buttons [1] — [6] to recall preset stations.
30 | English Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 Installation Proc edure 1. T o prevent a short circuit, remove the key from the ignition and disconnect the - battery.
English | 31 Connecting W ires to T erminals ANT . CONT MUTE P .CONT FRONT L FRONT R REAR L REAR R – + SUB WOOFER FM/AM antenna input F use (10A) Wiring harness (Accessory 1 ) White/Black Gray/Black.
32 | English Installation • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars Japanese cars 1 Refer to the section <Removing the hard rubber frame> (page 34) and then remove the hard rubber frame.
English | 33 Screwing the F aceplate on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off , screw in the provided screw s in the holes shown below . Accessory 5 Bottom panel • Never insert the screw in any other screw hole than the one specified.
34 | English Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations.
English | 35 T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON.
T roubleshooting Guide 36 | English T uner source ? Radio reception is poor . ✔ The car ant enna is not extended. ☞ Pull the antenna out all the way . ✔ The ant enna control wire is not connected. ☞ Connect the wire correctly, r eferring to the section on <Connecting Wir es to T erminals> (page31).
English | 37 Audio file sourc e ? Cannot play an A udio file. ✔ The media is scrat ched or dir ty. ☞ Clean the media, referring to the CD cleaning of the section on <About CDs> (page 7). ? The sound skips when an Audio file is being played .
T roubleshooting Guide 38 | English The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit.
English | 39 Specifications Specifications subject to change without notice. Audio section Maximum output power : 50 W x 4 F ull Bandwidth Power (at less than 1% THD) : 22 W x 4 Speaker Impedance : 4 .
B64-3311-00_English_r2.indd 40 B64-3311-00_English_r2.indd 40 05.11.10 8:08:21 PM 05.11.10 8:08:21 PM.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kenwood KDC-MP5032 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kenwood KDC-MP5032 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kenwood KDC-MP5032 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kenwood KDC-MP5032 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kenwood KDC-MP5032, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kenwood KDC-MP5032.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kenwood KDC-MP5032. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kenwood KDC-MP5032 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
