Manuale d’uso / di manutenzione del prodotto DPX-502UY del fabbricante Kenwood
Vai alla pagina of 44
DUAL DIN SIZED CD RECEIVER DPX502U DPX502UY INSTRUCTION MANUAL © B64-3829-00/00 (EW/E2W) B64-3829-00_00.Indd 1 B64-3829-00_00.Indd 1 07.5.8 9:21:47 AM 07.
2 | English Con tents Safety precautions 3 Notes 4 General featur es 7 Pow er Selecting the Source Volume Attenuator System Q Audio Control Adjusting the detail of Audio Contr ol Audio Setup Speaker S.
English | 3 Safety precautions 2 W ARNING T o prev ent injury or fire, take the f ollowing precautions: • T o prevent a short circuit, never put or leave an y metallic objects (such as coins or metal tools) inside the unit. • Do not watch or fix your ey es on the unit ’ s display when you are driving for an y extended period.
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • When you pur chase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The RDS f eature won ’t work where the service is not supported by any broadcasting station.
English | 5 About Audio file • Playable Audio file AAC-L C (.m4a), MP3 (.mp3), WMA (.wma), W AV (.wav) • Playable disc media CD-R/R W/ROM • Playable disc file forma t ISO 9660 Level 1/2, Joliet, Romeo, L ong file name.
6 | English Notes Handling CDs • Do not touch the recor ding sur face of the CD . • Do not stick tape etc. on the CD , or use a CD with tape stuck on it. • Do not use disc type accessories. • Clean from the cent er of the disc and move outward.
English | 7 General fea tures Powe r T urning ON the P ower Press the [SRC] button. ⁄ • When the power is ON, the <Security Code> (page 25) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond.
8 | English General fea tures Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time you press the button, the Attenuat or turns ON and OFF . When the Attenuator is ON, the " A T T" indicator blinks. V olume Increasing V olume T urn the [VOL] k nob clockwise.
English | 9 Adjusting the detail of A udio Con trol Among the Basic Audio items, y ou can adjust the Bass level, Middle level, and Treble lev el in detail.
10 | English General fea tures Subw oofer Output T urning the Subwoof er output ON or OFF . Push the Contr ol knob toward down for a t least 2 seconds. Each time you push the knob, Subwoofer output switches ON and OFF . When it is ON, "SW ON" is displayed.
English | 11 TEL Mute The audio system automatically mutes when a call comes in. When a call comes in "CALL " is displayed. The audio system pauses. Listening to the audio during a call Press the [SRC] button. The "CALL " display disappears and the audio system comes back ON.
12 | English General fea tures Switching Displa y Changing the information display ed. Press the [DISP] button. Each time the button is pressed the display switches as shown below .
English | 13 T uner featur es T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob towards [FM] or [ AM]. Each time you push the knob toward [FM], it switches between the FM1, F M2, and FM3 bands.
14 | English T uner featur es F unction of remote control Direct Acc ess T uning Entering the frequency and tuning. 1 Select the band Press the [F M] or [AM] button. 2 Enter Direct Ac cess T uning mode Press the [DIRECT ] button on the remote control.
English | 15 RDS featur es T raffic Information Changing to traffic information automatically when a traffic bulletin starts even when you are not listening to the radio . Press the [TI] button. Each time you press the button, the Traffic information function turns ON and OFF .
16 | English RDS featur es PTY (Progr am T ype) Selecting the Program T ype and searching f or a station. 1 Enter PTY mode Press the C ontrol knob. During PT Y mode the "PT Y" indicator is ON. ⁄ • This function cannot be used during a traffic bulletin or AM reception.
English | 17 Changing Language for PTY F unction Selecting the Program T ype display language. 1 Enter PTY mode Refer to <PTY (Program Type)> (page 16). 2 Enter Changing Language mode Press the [TI] button. 3 Select the language Push the Contr ol knob towards up or down.
18 | English CD/USB device/A udio file/External disc control f eatures Playing CD & A udio file When a disc is inserted Press the [SRC] button. Select the "CD" display. ⁄ • When a CD is inserted, the "IN" indicator is ON. Pause and play Press the C ontrol knob.
English | 19 Playing USB (iP od) devic e When the USB devic e is not connected Connect the USB device Playback of the file contained in the USB device starts. When the USB devic e is connected Select USB source Press the [SRC] button. Select the "USB" (or "iPod") display .
20 | English CD/USB device/A udio file/External disc control f eatures Music Search Switching between music contained in the disc or folder being played no w .
English | 21 T rack/File/Disc/F older Repeat Replaying the music, disc in the Disc changer or Audio file folder y ou are listening to . Press the [REP] button. Each time you press the button, the Repeat P lay alternates between the modes shown in the tables below .
22 | English CD/USB device/A udio file/External disc control f eatures F unction of non-iPod and non-"Music Editor" file File Select 1 mode Select the target folder by tracing the hierarchical levels of folders . This is convenient when manag ing audio files by folder .
English | 23 F unction of non-iPod and non-"Music Editor" file File Select 2 mode Select the target folder within the folders containing audio files. The f older which contains playable audio files is only displayed . 1 Enter F ile Select 2 mode Press the [F .
24 | English Menu system Menu Sy stem Setting beep sound during operation, etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second.
English | 25 In Standby mode Security Code Activating the Security Code disables the usage of audio unit by someone else. Once the Security Code is activated, the entry of authorized Security Code is requir ed to turn on the audio unit when it is removed fr om the vehicle.
26 | English Menu system In Standby mode Synchr onize Clock Synchronizing the RDS station time data and this unit’ s clock. Display Setting "SYNC ON" Synchr onizes the time. "SYNC OFF" Adjust the time manually . ⁄ • It takes 3 to 4 minutes to synchronize the clock.
English | 27 In Standby mode Built-in Amp Setting Controlling the built-in amplifier . T urning OFF this control enhances the pr eout quality. Display Setting " AMP ON" The built-in amplifier activat es. " AMP OFF" The built-in amplifier deactivat es.
28 | English Menu system AF (A lternative F requency) When the reception is poor , automatically alternate to another frequency broadcasting the same program in the same RDS network with better reception. Display Setting " AF ON" The AF function is ON.
English | 29 Auto TP Seek When the TI function is ON and the reception is poor while listening to a traffic information station, another traffic information station with better reception will be searched f or automatically . Display Setting " A TPS ON" The Auto TP Seek Function is ON.
30 | English Menu system In Standby mode CD Read Setting When there is a problem with playing a CD with special format, this setting plays the CD b y force . Display Setting "CD READ1" Play CD and Audio file. "CD READ2" Play CD by force .
English | 31 In Standby mode Firm ware v ersion display Displaying the firmwar e version with the unit. 1 Select the firmware v ersion display mode Push the Contr ol knob towards up or down. Select the "F/W VER" display . 2 Display the firm ware v ersion Push the Contr ol knob towards right or left.
32 | English Basic Operations of r emote contr ol Loading and Replacing the battery Use two " AA "/ "R6"-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case .
English | 33 Audio C ontrol [A UD] button Selects the Audio item to be adjusted. [VOL] buttons Adjusts the Audio item. ⁄ • Refer to <Audio C ontrol> (page 8) for the operation method, such as the procedures f or Audio control and others operations.
34 | English Ac cessories/ Installation P rocedur e Ac cessories 1 ..........1 2 ..........2 3 ..........1 Installation Proc edure 1. T o prevent short circuits, remove the key from the ignition and disconnect the - terminal of the battery. 2. Make the proper input and output wire connections for each unit.
English | 35 Connecting W ires to T erminals REMO.CONT P. C O N T ANT .CONT MUTE 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Battery wire ( Y ellow) Ignition wire (Red) FM/AM antenna input (JASO) Antenna Cord T o connect the Kenwood navigation system, consult your navigation manual.
36 | English Connecting W ires to T erminals Connector F unction Guide Pin Numbers for ISO Connectors Cable Colour Functions External Power Connector A-4 Yellow Battery A-5 Blue/White Power C ontrol A.
English | 37 Installing the Unit Installation Accessory 3 Fir ewall or metal suppor t Screw (M4X8) (commercially available) Self-tapping screw (commercially available) Metal mounting strap (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place.
38 | English Removing the Hard Rubber F rame (escutcheon) 1 Engage the catch pins on the removal tool 2 and remove the two locks on the lower level . L ower the frame and pull it forward as shown in the figure. 2 When the lower level is removed, r emove the upper two locations.
English | 39 T roubleshooting Guide Some functions of this unit may be disabled by some settings made on this unit. ! Cannot switch to A ux source. ▲ • AUX is not turned on. ☞ <Built-in Auxiliary input Setting> (page 30) • AUX cannot be used when the KCA-iP200 is connected.
40 | English T roubleshooting Guide The messages shown belo w display your systems condition. EJEC T: • No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. • No CD in the unit. NO DISC: No disc has been loaded in the disc magazine.
English | 41 FM tuner section Fr equency range (50 kH z space) : 87.5 MH z – 108.0 MHz Usable sensitivity (S/N = 26dB) : 0.7 μV /75 Ω Quieting Sensitivity (S/N = 46dB) : 1.
B64-3829-00_00.Indd 42 B64-3829-00_00.Indd 42 07.5.8 9:22:03 AM 07.5.8 9:22:03 AM.
B64-3829-00_00.Indd 43 B64-3829-00_00.Indd 43 07.5.8 9:22:03 AM 07.5.8 9:22:03 AM.
B64-3829-00_00.Indd 44 B64-3829-00_00.Indd 44 07.5.8 9:22:03 AM 07.5.8 9:22:03 AM.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kenwood DPX-502UY è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kenwood DPX-502UY - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kenwood DPX-502UY imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kenwood DPX-502UY ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kenwood DPX-502UY, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kenwood DPX-502UY.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kenwood DPX-502UY. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kenwood DPX-502UY insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
