Manuale d’uso / di manutenzione del prodotto 2220695 del fabbricante Kenmore
Vai alla pagina of 24
® Side by Side Refrigerator Use & Osage Guide Refrigerador de dos puertas Manua_ de uso y cu_dado R6frig6rateur c6te & c6te Guide o___ ,,:_0 c_ ut_saSon et d°ent:tx_:tien Sears Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. www.sears.com 2220695 Sears Canada, Inc.
OF CONTENTS WARRANTY WARRANTY ..................................................................................... 2 REFRIGERATOR SAFETY .............................................................. 3 REFRIGERATOR INSTALLATION ......................
REFRIGERATOR SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
REFRIGERATOR INSTALLATION Excessive Weight Hazard Use two or more people to move and install refrigerator, Failure to do so can result in back or other injury, Removing packaging materials • Remove tape and glue residue from surfaces before turning on the refrigerator.
Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock.
TOOLS NEEDED: 1/4in., 1/_in., and 5A6in. hex-head socket wrenches, a flat-head screwdriver and a Phillips screwdriver. IMPORTANT: Before you begin, turn the refrigerator control OFF, unplug refrigerator or disconnect power. Remove food and any adjustable door or utility bins from doors.
NOTE: It may only be necessary to remove either the door handle or the doors to get your product through the doorway of your residence. Measure the door opening to determine whether to remove the refrigerator handles or the doors. Handle Removal (optional) 1.
'_ _ S _ C '_ _ _ "_ D®o and A ignment Door Closing 1. Move the refrigerator into its final position. 2. Place a level inside the refrigerator at the back of the top shelf (see Graphic 8). 3. Locate the leveling screws behind the base grille of the refrigerator on either side.
Please read before using the water system. immediately after installation, follow the steps below to make sure that the water system is properly cleaned. 1. Open the freezer door and turn off the ice maker. For Style 1 lift up the wire shutoff arm as shown.
@7 _ _ _, i _:_, Rotary Controls Ion some models) For your convenience, your refrigerator controls are preset at the factory. When installing your refrigerator, make sure that the controls are still preset to the "mid-settings" as shown.
3. Remove the glass to stop dispensing. NOTE: The first few batches of ice may have an off-flavor from new plumbing and parts. Throw the ice away. Also, take large amounts of ice from the ice bin, not through the dispenser.
Style 1: Behind the base grille filter 1. Remove the base grille (see "Removing the base grille" section). Rotate the cartridge counterclockwise to a vertical position and pull the filter cartridge out. NOTE: There will be water in the cartridge.
Maximum Ice Production (on some models): In maximum ice production, the ice maker should produce approximately 10 to 14 batches of ice in a 24-hour period. If your refrigerator has the maximum ice production feature, push the switch to MAX. To remove and replace freezer shelf ice bin (Style 1): 1.
2. Replace the shelf by guiding it back into the slots on the frame and pushing the shelf in past the stop. Shelves and Shelf Frames To remove and replace a shelf/frame: 1. Remove the shelf/frame by tilting it up at the front and lifting it out of the shelf supports.
IMPORTANT: To extend freshness, wrap meats in airtight, moisture-proof materials before storing. Always store meat as recommended. Adjusting the control The convertible control comes preset at the lowest meat setting. To change a control setting: Move the control to the right (colder) or to the left (less cold) as desired.
The freezer basket or bin can be used to store bags of frozen fruits and vegetables that may slide off freezer shelves. To remove and replace the freezer basket or bin: 1. Remove basket or bin by sliding it out to the stop. 2. Lift the front of the basket or bin and slide it out the rest of the way.
4. 5. 6. Wash stainless steel and painted metal exteriors with a clean sponge or soft cloth and a mild detergent in warm water. Do not use abrasive or harsh cleaners. Dry thoroughly with a soft cloth. For additional protection against damage to painted metal exteriors, apply appliance wax (or auto paste wax) with a clean, soft cloth.
• Replace the light shield by inserting the left tab into the freezer wall. Align top tab with screw hole and replace screw. If the power will be out for 24 hours or less, keep both refrigerator doors closed to help food stay cold and frozen.
• Is a light bulb loose in the socket or burned out? See the • "Changing the Light Bulb(s)" section. There is water in the defrost drain pan Is the refrigerator defrosting? The water will evaporate. It is normal for water to drip into the defrost pan.
• Has the ice frozen in the ice bin or bucket? Shake the ice bin or bucket to separate cubes. If cubes do not separate, empty bin or bucket and wait 24 hours for ice to restock. • Has the ice melted around the auger (metal spiral) in the ice bucket? Dump the ice cubes and clean the ice bucket completely.
There is interior moisture buildup Are the air vents blocked in the refrigerator? Remove any objects from in front of the air vents. See the "Ensuring Proper Air Circulation" section for the location of air vents.
Oanada Your purchase has added value because you can depend on Sears HomeCentral ® for service. With over 2,400 Service Technicians and access to over 900,000 parts and accessories, we have the tools, parts, knowledge and skills to back our pledge: We Service What We Sell.
PRODUCT DATA Base Grille Water Filtration System Model WF-NLC250/NLC250 Tested and certified by NSF International against ANSI/NSF Standard 42 for the reduction of Chlorine (Class I) Taste and Odor and against ANSI/NSF Standard 53 for the reduction of Lead, Cysts and Turbidity.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kenmore 2220695 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kenmore 2220695 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kenmore 2220695 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kenmore 2220695 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kenmore 2220695, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kenmore 2220695.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kenmore 2220695. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kenmore 2220695 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
