Manuale d’uso / di manutenzione del prodotto UFS 705si del fabbricante Kathrein
Vai alla pagina of 88
Operating manual - englisch - DVB Satellite Receiver UFS 705si/705sw.
2 Electronic equipment is not domestic waste - in accordance with directive 2002/96/EC OF THE EUROPEAN P ARLIAMENT AND THE COUNCIL dated 27 th January 2003 on used electrical and electronic appliances, it must be disposed of properly . At the end of its service life, take this unit for disposal to an appropriate of fi cial collection point.
3 IMPORT ANT INFORMA TION SWITCHING OFF THE RECEIVER AND UPDA TING THE EPG By pressing the button you can switch the receiver out of TV mode and into standby mode. Pressing any of the numeric buttons returns it from standby mode into operating mode.
4 CONTENTS PREF ACE .............................................................................................................................. ... 2 IMPORT ANT INFORMA TION ..........................................................................
5 CONTENTS MOVE CHANNELS ............................................................................................................... 54 DELETE CHANNELS ...............................................................................................
6 SAFETY INSTRUCTIONS - IMPORT ANT NOTES.
7 RECEIVER FEA TURES/SCOPE OF SUPPL Y The UFS 705si and UFS 705sw receivers are suitable for receiving digital satellite TV and radio channels. The built-in Common Interface offers space for two CA modules for pay-TV channels and ensures a guaranteed future.
8 CONTROLS, DISPLA YS AND CONNECTIONS This section provides a brief description of all the controls, displays and connections. Front panel controls and displays 1. On/Off switch (with mains disconnect) 2. Display (cover folded down) 3. Common Interface for two CA modules for Pay-TV cards * ) 4.
9 CONNECTION AND SET -UP The following section is intended speci fi cally for specialist dealers. Y ou only need read this section if you are performing the installation yourself. The “Connection Examples” section provides a sample con fi guration.
10 CONNECTION AND SET -UP Connect the satellite receiver (TV Scart socket) and the TV set using a Scart cable (see “Connection Example”). If your TV has a stereo feature, you can receive the sound in stereo via the Scart connection. Use a further Scart cable to connect the satellite receiver (VCR/Scart socket) to the video recorder/PVR.
11 REMOTE CONTROL Sound on/off ... Switch on/input digits for channels, timer etc. Call up Main Menu, exit the menu and return to the TV picture (red) Call up favorites selection ! (gr.
12 The RC 660 remote control supports up to four devices (which are supplied with the RC 660 as standard) as well as the receivers of the UFD 5xx (not UFD 552, 554, 558) and UFD 4xx families. First switch all receivers off (at the power switch). T o con fi gure a receiver to an infrared code: Switch on the relevant receiver .
13 FIRST INST ALLA TION: General Before using your unit for the fi rst time, read the “Safety Instructions” and “Connection and Setup” sections. The “Connection examples” section provides a sample con fi guration. Do not connect the unit to the power supply until all installation work has been properly carried out.
14 Use the buttons here to select the settings for your TV set. When doing this, refer to the operating instructions for your TV set! TV aspect ratio Here you select the TV format.
15 FIRST INST ALLA TION: General Picture format Here you select the type of screen display , depending on the setting of your TV format: - TV format “4:3”: Pan & Scan or Letterbox - TV format “16:9”: Always 16:9 or automatic TV -SCART -Output Select the type of video signal at the TV Scart socket here.
16 Number of Satellites Use the buttons to select how many satellites (max. 4) you would like to receive with your reception system. The following display appears (example): FIRST INST ALLA TION: DiSEqC™1.0 Use the buttons to select the fi rst satellite slot.
17 FIRST INST ALLA TION: DiSEqC™1.0 LNB T ype Here use the buttons to select the LNB type used in your system. The choice is between “Universal” and “User-de fi ned”. Universal: No further input is required, since all necessary frequency ranges are covered by a universal LNB.
18 FIRST INST ALLA TION: SIMPLE LNB Satellite and position Use the buttons to select the desired satellite whose signal is to be received by the tuner . When you have selected your desired satellite, use the buttons to switch to the selection of the “LNB T ype”.
19 FIRST INST ALLA TION: SIMPLE LNB User-de fi ned: If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB was con fi gured. Use the buttons to select the frequency range to be changed (low , high or limit frequency).
20 FIRST INST ALLA TION: Single-cable system Use the buttons here to select “One Cable” as the “System”. Press the button to move to the next menu item. The following display appears: Number of Satellites Use the buttons to select how many satellites (max.
21 Universal: No further input is required, since all necessary frequency ranges are covered by a universal LNB. Wideband: No further input is necessary , since all frequency ranges are set by the Wideband LNB. User-de fi ned: If you are not using a Universal or a Wideband system, you must set the frequencies here.
22 FIRST INST ALLA TION: Single-cable system (Automatic) The receiver searches for the transmission channels on your single-cable system and shows in the next display the available transmission channels. Use the buttons to select the transmission channel you want and con fi rm the selection with the button.
23 Connected equipment Use the buttons to select the type of system to which they are connected or the single-cable system components fi tted (refer to the manuals, instructions and notes for the system and the system components). Available options: - User-de fi ned - KA THREIN UAS 481 (single-cable feed system, max.
24 FIRST INST ALLA TION: Single-cable system (Manual) If no connection to the single-cable system could be established, the following display appears: Check your settings (frequency and transmission channel) and if necessary call for expert help. Press the button to acknowledge this display .
25 Selection “UAS 481” or “EXR 551” T ransmission channel Use the buttons to select a free available transmission channel. A maximum of four transmission channels are available (1400, 1516, 1632 and 1748 MHz).
26 Selection “EXR 552” T ransmission channel Use the buttons to select a free available transmission channel. A maximum of two transmission channels are available (1400 and 1516 MHz).
27 FIRST INST ALLA TION: Single-cable system (Manual) Selection “EXU 908” T ransmission channel Use the buttons to select a free available transmission channel. A maximum of eight transmission channels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980 and 2096 MHz).
28 Selection “4 subscriber” T ransmission channel Use the buttons to select a free available transmission channel. A maximum of four transmission channels are available (1284, 1400, 1516 and 1632 MHz).
29 FIRST INST ALLA TION: Single-cable system (Manual) Selection “8 subscriber” T ransmission channel Use the buttons to select a free available transmission channel. A maximum of eight transmission channels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980 and 2096 MHz).
30 Execute Channel search Use the buttons to select (yes or no) whether you wish to start a channel search. It is not essential to start a channel seach; instead you can use the factory pre-programmed channels. However the channels do change from time to time (e.
31 Local time offset Use the buttons to set the time zone variation from UTC (formerly GMT) (e.g. for Germany +1 hour). Use the buttons to switch to the “Automatic clock change” fi eld. Use the buttons to select whether the receiver should automatically change over to and from summer and winter time.
32 OPERA TING INSTRUCTIONS The structure of the menu concept is based on logical operating sequences. The programme showing on the current selected channel always appears in the top right-hand corner of the screen.
33 MENU TREE OPERA TING INSTRUCTIONS Main Menu Call up the Main Menu by pressing the button.
34 OPERA TING INSTRUCTIONS The language for the on-screen display is set as follows: → → Language Setting → → → English → Available options: German, English, Italian, French, Dutch, Spanish, Czech and T urkish. After you have performed the settings, press the or the button to exit the Main Menu.
35 ON-SCREEN DISPLA YS (OSD) Channel information is shown for a few seconds each time the channel is changed (this can be changed under “Settings”, “Adjust Displays”) or displayed continuously by pressing the button. The information for the current radio channel has the same layout.
36 Press the " (yellow) button once (twice for portal channels) to view further soundtrack selection options, if these are transmitted by the channel provider . Use the buttons to scroll through the available selection options. Pressing the " (yellow) button again, or pressing the button exits this display again.
37 T o the right of it you see the current channel list sort order as selected by you.The channel list can show channels sorted by various selection and sorting criteria. Selection and sorting options: - Press the (red) button to call up the favorites list selection.
38 EPG - ELECTRONIC PROGRAMME GUIDE CALLING UP THE EPG The EPG is called up by pressing the button. Each time the EPG is called up, you will automatically be shown the “Current” view , irrespective of which view you were shown the last time you exited the EPG.
39 EPG - ELECTRONIC PROGRAMME GUIDE Selection options: - (red) button Calls up the plan recording (display of all pre-programmed recordings) - button Jump the “Current” view forwards by 15 min.
40 PREVIEW VIEW (PROGRAMME LISTINGS) The Preview view (TV Program Guide) can be called up at any time in EPG by pressing the " (yellow) EPG - ELECTRONIC PROGRAMME GUIDE button. In the “Preview” view you will see all the programmes that will be shown in the previous “Current” list of selected channels.
41 EPG - ELECTRONIC PROGRAMME GUIDE CA TEGORIES VIEW The “Categories” view can be called up at any time in EPG by pressing the # (blue) button. In the “Categories” view you can see all programmes sorted by category and starting time.
42 SEARCH FUNCTION The search function can be called up at any time in EPG by pressing the button. The search function allows you to search for programmes based on their additional information or their name. Use the keypad to input the desired search expression (see also “Operating Instructions” “Alphanumeric Input”).
43 EPG - ELECTRONIC PROGRAMME GUIDE ADDITIONAL INFORMA TION (i BUTTON) The additional information can always be called up by pressing the button whenever the “i symbol” appears in front of the program name (see screenshot on the right). First however the channel must be selected.
44 RECORDING (TIMER) The (red dot) button allows you to set up a programme at any time for recording on an external recorder . The programme to be recorded can be selected in any of the EPG views, provided the (red dot) button appears at the bottom of the screen display .
45 EPG - ELECTRONIC PROGRAMME GUIDE RECORD ONCE Use the buttons to select the recording mode “once” (see screenshot item “Recording (T imer)”). Use the buttons to switch to the selection fi eld “Date” and use the buttons to select the desired recording date.
46 RECORD WEEKL Y Use the buttons to select the recording mode “weekly” (see screenshot below). Use the buttons to switch to the selection fi eld “Start” and use the buttons or the numeric pad to select the desired recording starting time.
47 Use the buttons to switch to the selection fi eld “End” and use the buttons or the numeric pad to select the desired recording ending time. When all settings have been made, press the button to save the recording settings. Y ou can view the recording in the T imer List view of the EPG (see item “Plan recording”).
48 EPG - ELECTRONIC PROGRAMME GUIDE PLAN RECORDING The “T imer List” view can be called up at any time in EPG by pressing the (red) button. The timer list view shows you all the recordings that are scheduled. The buttons allow the recordings to be sorted into “once-only recording” or “Repeating” recordings.
49 COMMON INTERF ACE Always follow the operating instructions from your Pay-TV provider and the instructions supplied with the Smartcard and the CA module! Smartcards and CA modules are not included w.
50 Y ou can fi nd out which Conditional Access modules are in the CI slots on the UFS 705 and which Smartcard is in which CA module from the “Mainmenu” under “Settings”, and the “Common Interface” menu. Con fi rmation is by pressing the button.
51 VIDEOTEXT (TELETEXT) This symbol in the channel noti fi cation shows you whether Videotext/T eletext is available for the selected channel. When you press the button, the receiver processes the broadcast Videotext/T eletext service for your TV set to display , even when the signal is encrypted.
52 EDIT CHANNEL LIST Select the “Edit TV -Channellist” menu using the menu button , the buttons on the main menu and . Press the button to close the information display for editing channels and channel lists.
53 EDITING LISTS/CHANNELS When you have selected the channel or channel list to be edited, press the (red dot) button to call up the edit menu. Y ou have the following edit options: - Move: Channe.
54 DELETE CHANNELS Use the buttons to select the channel to be deleted from the current channel list. Press the button to call up the edit menu and use the buttons to select the “Delete” function. Con fi rm the command by pressing the button.
55 LOCK CHANNELS Use the buttons to select the channel to be locked in the current channel list. Press the button to call up the edit menu and use the buttons to select the “Lock” function. Con fi rm the command by pressing the button.
56 EDIT CHANNEL LIST EDIT F A VORITES LISTS When you have selected the Favorites List to be edited (called up using the (red) button and selected using the buttons), press the (red dot) button to call up the edit menu.
57 LOCK CHANNELS Use the buttons to select the channel to be locked from the Favorites List you have selected. Press the button to call up the edit menu and use the buttons to select the “Lock” function. Con fi rm the command by pressing the button.
58 SEARCH CHANNELS (CHANNEL SEARCH) Select the “Search Channels” menu using the menu button , the buttons on the main menu and . Y ou have three options for a channel scan: - Automa.
59 Satellite Select the satellite to be scanned, using the buttons. Make sure your reception system is aligned to the selected satellite. Y ou can scan only one satellite at a time. If you have connected a multi-feed reception system (e.g. reception of ASTRA 19.
60 Newly found channels are identi fi ed with the designation “new” after the channel name. After completion of the search, you will see the following message (example): Press the button. Y ou will be asked whether you wish to save the changes or not.
61 SEARCH CHANNELS (CHANNEL SEARCH) The buttons allow you to select different sets of parameters for the scan. Satellite Use the buttons to select the satellite on which the transponder you wish to scan is located. Make sure your reception system is aligned to the selected satellite.
62 Press the button. Y ou will be asked whether you wish to save the changes or not. Selection is performed using the buttons and is con fi rmed using the button. If you select “Y es, save changes”, the newly found channels will be added to the end of the channel list.
63 Press the button to move to the next selection item. T ransponder Frequency Use the buttons or the numeric keypad to select the transponder frequency on which the channel being sought is transmitted.
64 P ARENT AL CONTROL Select the “Parental control” menu using the menu button , the buttons on the main menu and . Y ou are now prompted to enter the PIN code (factory default setting: 0000).
65 Press the button to replace the old PIN with a new one. Enter the new (four-digit) PIN. For security you must repeat the new PIN code once again.
66 SETTINGS The selected menus, sub-menus and positions, as well as the parameters to be set, are each highlighted in colour . The menus are to a large extent self-explanatory . Pay attention to the bar at the bottom of the on-screen display . These provide information on what to do next.
67 Here you can use the buttons to select the type of video signal at the TV Scart socket. Select the signal that your TV set can process. When doing this, refer to the operating instructions f.
68 Here you can use the buttons to select the type of video signal at the VCR Scart socket. Select the signal that your external recorder can process.
69 SETTINGS Use the buttons to select the time after which you want the on-screen channel noti fi cation display to be automatically cancelled. The options available are “Of f”, 1, 2, 3, 4, 5 or 6 seconds. CHANNEL OSD DURA TION Use the buttons (On/Off) to specify whether the volume bar is displayed when adjusting the volume.
70 SETTINGS DA TE AND TIME COMMON INTERF ACE See “Common Interface” section ANTENNA CONFIGURA TION See “First Installation” section, pages 14ff Local time offset Use the buttons to set the time zone variation from UTC (formerly GMT) (e.
71 SER VICE MENU Select the “Service” menu using the menu button , the buttons on the main menu and . The following display appears: Current software version Last update run UPDA TE.
72 SER VICE MENU Also pay attention to the bars at the bottom of the on- screen display! These provide information on what to do next. Update Software If new software is available (but only then), use the buttons (No/Y es) to select whether you wish to load the new software that is available.
73 RESTORE F ACT ORY DEF AUL T SETTINGS Select the “Service” menu using the menu button , the buttons on the main menu and . Use the buttons to switch to “Restore factory default settings” and to call them up press the button.
74 CONNECTING UP THE VIDEO/PVR For details of how to connect your external recorder to the receiver refer to the connection diagram provided at the end of this manual and the instructions for the external recorder .
75 USING THE FRONT P ANEL If you have misplaced your remote control, or if the batteries are fl at, you can still operate your receiver from the front panel. BACKUP OPERA TION There are three buttons on the front of the receiver . TV/R button: Pressing the TV/R button switches the receiver from TV mode to radio mode.
76 TECHNICAL APPENDIX FEA TURES ¹ ) CA modules and Smartcards not included in the delivery scope ² ) Display of information only if broadcast by the programme provider Reception of digital TV an.
77 TECHNICAL APPENDIX T ype UFS 705si UFS 705sw Order no./colour 202101 14/silver 202101 15/black RF properties Input frequency range MHz 950-2,150 Input level range dBµV 44-83 Reception threshold (EB/NO) dB < 4.
78 Signal Pin no. TV VCR/AUX Right audio output 1 X X Right audio input 2 X Left audio output 3 X X Audio earth 4 X X Blue earth 5 X X Audio left input 6 X Blue signal 7 X X Switching voltage 8 X X Gr.
79 Scart Scart Digitalton AC 3 optisch/elektrisch Infrarot-Empfänger (optional) LW L CONNECTION EXAMPLE TECHNICAL APPENDIX Dolby Digital system Digital audio AC 3 electrical Cinch Scart Cinch Scart P.
80 TECHNICAL APPENDIX EXAMPLES single-cable systems EXR 501/551/552 Single-cable switching matrices * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KA.
81 TECHNICAL APPENDIX UAS 481 Single-cable feed system * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12.
82 TECHNICAL APPENDIX EXR 1581/2581 Single-cable matrices * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12 Sat IF.
83 TECHNICAL APPENDIX EXU 908 Single-cable matrix * ) The receiver must be programmed for single-cable commands ** ) Overvoltage protection KAZ 1 1/KAZ 12 Sat IF 2 x Quatro LNB UAS 484/584.
84 SHORT TECHNICAL GUIDE DISEQC™ DiSEqC™ (Digital Satellite Equipment Control) is a communication system between a satellite receiver (master) and the peripheral satellite components (slaves), such as LNBs, multi-switches, rotating antenna systems.
85 PID The PID (Packet IDenti fi cation) number is an identi fi cation number for video signals and audio signals in the digital data stream of DVB-MPEG-2 signals. The receiver uses the PID number to create a unique assignment for the video and audio data transmission.
86 SHORT TECHNICAL GUIDE AC 3 Output for Dolby Digital signal Audio output Sound output on the receiver A V programme pos. Preferred programme position on TV set for Scart input CA Conditional Access .
87 TROUBLESHOOTING In the event of a malfunction, fi rst check all the cable connections and operating states: 1. Receiver and TV set power plugs are connected to the wall socket 2. Antenna cables are located on the receiver input 3. Receiver and TV set correctly interconnected by a Scart or cinch cable 4.
Internet: http://www .kathrein.de KA THREIN-Werke KG • Anton-Kathrein-Straße 1 - 3 P .O. Box 100 444 • 83004 Rosenheim GERMANY 936.3206/D/0209/ZWT - T echnical data subject to change.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Kathrein UFS 705si è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Kathrein UFS 705si - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Kathrein UFS 705si imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Kathrein UFS 705si ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Kathrein UFS 705si, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Kathrein UFS 705si.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Kathrein UFS 705si. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Kathrein UFS 705si insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
