Manuale d’uso / di manutenzione del prodotto VN-T16/U del fabbricante JVC
Vai alla pagina of 43
VN - T16 / U HD IP CAMERA INSTRUCTION S.
1 Contents Conten t s of this manual ................................................................................................. 2 Cautions and Warni ngs ...........................................................................................
2 Conten t s of this manual Ÿ Windows, Internet Explorer, DirectX and FAT32 are registered trademarks of Microsoft Corporation in the U.S. Ÿ Pentium is a registered trademark of Intel Corporation in the U.S . Ÿ NVIDIA and GeForce are trademark s or registered trademark s of NVIDIA Corporation in the U.
3 Caution Connect only one camera to the power line, A C24V/ DC12V. Do not share the power line with other equipment. The power cable between power source and the camera must be under 3 m. Caution When powering the camera from AC 24V , a UPS source should be considered to ensure satisfactory performance.
4 1 About This Document This INSTRUCTIONS is designed to be a reference tool for the installation and operation your system including the camera ’s features , functions and detailed explanation of the menu tree.
5 2 Product Overview Came ra Parts and Definitions Camera Overview Camera Parts and Definitions 3 2 Lens is not provided. 1 Safety Wire( F all P revention W ire , not provided).
6 1. CS mount: connect the lens with the camera 2. Screw : lock Back focus Adjustment 3. Back focus Adjustment 4. Base: connect the camera with the tripod 5. SD card sl ot: insert a SD card into this slot for recording and storage 6. Video: not supported (for factory use only) 7.
7 3 I nsta llation and Connection s This chapter describes the installation and connection of the Box Camera. Before You Begin Please read this INSTRUCTIONS carefully before you install and operate the camera.
8 Please check the items in accordance with the list on the warranty card. Finally you can remove the protective film of the camera. Mounting 1. Attach the camera to a pending mount. Insert the screws on the camera stand into either of the scre w holes on the base.
9 Hardware and Software Requirements Computer Windows XP or Windows 7 as OS Internet Explorer Version 6.0 - 8.0 CPU: Intel Pentium IV X2 2.4 GHz or equivalent AMD Memory: 1G or above Display adapter Support DirectX9 for example NVIDIA GeForce 6 Series above AT I Mobility Radeon 9500 above .
10 2. Set the personal computer’s IP address. The camera’s default IP address is 192.168.0. 2 and sub mask is 255.255.255.0. 3. Check that the camera and computer are c onnected by pinging the IP address you have set. To do this, start a command prompt ( Windows: from the Start Menu, se lect Program.
11 • In Windows 7 only, Click 【 Tools 】 è 【 Internet Options 】 è 【 Security 】 o Enable Protected Mode (require restarting Internet Explorer) è Unchecked.
12 • Click 【 Tools 】 è 【 Internet Options 】 è 【 Security 】 è 【 Custom level 】.
13 • Modify the configuration of IE ’ s security setting as follow: 【 Download signed ActiveX controls 】 è Prompt (recommended) 【 Download unsigned ActiveX controls 】 è Prompt 【 Initia.
14 l 【 Run ActiveX controls and plug - ins 】 è Enable l 【 Script ActiveX controls marked safe for scripting * 】 è Enable 6. Type your setting IP address into the browser.
15 4 Overview of Navigation and Controls Live View Live view is designed for gen eral users to control the camera. In the left list it displays : Ÿ Full Screen: Set Full screen Ÿ One shot: take a picture from live view Ÿ Audio In: get audio and output from PC.
16 Basic Figure 4 - 1 Basic Image Color Automatic Exposure.
17 Fi gure 4 - 2 Automatic Exposure Automatic Exposure controls the light intensity of picture. There are four types for adjustment. You can select M anual , AES (Automatic Electronic Shutter) , Flicker - free 50Hz an d Flicker - free 60Hz for the camera depending on your application conditions.
18 Figure 4 - 4 Brightness adjustment , Contrast , Saturation Shutter Speed Figure 4 - 5 Shutter Speed Set desired Shutter Speed from 1/ 2 5s to 1/ 10000 s. When video type is PAL ,t he Sh utter Speed can be set at 1/25, 1/50, 1/100, 1/120, 1/150, 1/200, 1/300, 1/500 , 1/750, 1/1500, 1/5000 and 1/10000s.
19 R Gain, B Gain & D Gain Figure 4 - 8 R Gain, B Gain & D Gain Set manual gain value of R Gain , B Gain , and D Gain from 0 to 255. This function is applied for manual lens only. The red( R ) gain is used to adjust the red color of the viewing image.
20 of objects in the area expected to view, areas desired to see become dark and inv isible. Therefore, this function is essential. Picture Figure 4 - 12 Picture Picture Flip Set image to be upside or down. Select “ ON ” or “ OFF” to activate or deactivate the flip function.
21 1 The user interface of Encoder No.1 is as follows : Figure 4 - 13 Encoder No. 1 Table below elaborates the above figure . Table 4 - 1 Compression Comp ression Item Function Choice Remark Encoder No.1 MJPEG MPEG4 Compression Format H.264 Set a default compression mode.
22 QVGA @ 30fps MPEG4/ MJPEG : VGA, QVGA,@30fps Variable bit rate Rate control mode Constant bit rate Choose the Bit Rate control selection based on user requirements. Compression Ratio Customized mode Low Mid - low Standard Mid - high High Low: th is setting produces highest image quality while the file size increases.
23 2 The user interface of Encoder No. 2 is as follows : Figure 4 - 1 4 Encoder No.2 Table below elaborates the above figure . Table 4 - 2 Compression Compression Item Function Choice Remark Encoder No. 2 MJPEG MPEG4 H264 Compression Format no streaming Set H.
24 PAL: H.264/MJPEG/MPEG - 4: D1, QVGA @ 25 fps NTSC: H.264/MJPEG/MPEG - 4: D1, QVGA @ 30 fps variable bit rate Rate control mode constant bit rate Choose the Bit Rate control selection based on user requi rements.
25 Mask Zone l Enable button “ ON” , then click “Set Mask Zone” to start mask setting . l Use mouse to drag a mask rectangle on the screen, click “ OK ” to complete the selection.
26 Figure 4 - 15 Mask Zone Note: Max 4 masks can be set on the screen. The maximum size of a mask is 15% of the screen. . . Alarm External Digital Input 1 When alarm input is connected, the camera triggers an alarm only when the normal state (open or closed) changes.
27 1 Alarm Input Set the Alarm Input as “Alarm Input” or “OFF”. 2 Input Type Choose Normally Open or Normally Close Figure 4 - 16 External Digital Input1 Motion Detection Settings This function is designed to record video when the camera detects a motion.
28 Figure 4 - 19 Output Hold Time Note Please click the “ Save” button to save your settings. You can also click the left button “Reset to Default ” to set all the data and options as defaults. SD Recording Confined SD recording priority: alarm > mo tion > network loss .
29 Note l H.264 is the preferred source for recording. l If both Encoder No.1 and Encoder No. 2 are H.264, th e stream will choose the Encoder No. 2 as recording source. l SD recording can be enabled only when user choose the following 5 combinations.
30 Email Server Settings Authentication Settings Figure 4 - 23 Email Server Settings Select an authentication type. 1. No Authentication: no restrict rule 2. SMTP: Simple Mail Transfer Protocol (SMTP) is an Internet standard for electronic mail (E - mail) transmission across Internet Protocol (IP) networks.
31 Figure 4 - 26 Mail to If “ Send to A dministrato r” is set to “ON” when a motion happens, the E - mail server will always send a mail to the administrator. And E - mails can also be sent to multiple users when a motion occurs. Note Please click the “Save” button to save your settings.
32 Audio Output Ÿ Audio Output : Set to "ON" when delivering audio to a speaker connected to the camera, Ÿ Audio Output Level: Select among High, Mid and Low Figure 4 - 29 Audio Output Note: Audio Input/Output can have some n oise and delay.
33 Port Ÿ Port: This is H ttp port number of WEB server in the camera. When H ttp is selected for Live Stream Protocol, Live View also uses the por t number. We recommend using the default port; if you need to change the default port, please contact your system administrator.
34 RTSP Authentication Y ou should enter the Login ID, Password and Password (confirm) if selec t “ O N ” . Figure 4 - 32 Authentication Multicast Address You could choose the value from 224.0.0.23 to 239.255.255.254. Figure 4 - 33 Multicast Address Encoder No.
35 H ttp s Figure 4 - 35 Certificate File Upload Us ers can upload certificate here: Click “ B rowse ”, it will pop out a window then you can choose the file that you want to upload. Admin F unction Administrator Press the item - Administrator Function on setting menu.
36 Figure 4 - 37 User Setting 1 Finally, click Save to save the settings. Figure 4 - 38 Reset Date/Time Set Display and Synchronization Mode Figure 4 - 39 Date and Time T he user can choose Synchronizati on Mode here from three different types . Set Date and Time Manually Set up the camera ’s date and time in the Set Date and Time Manually field.
37 Daylight Figure 4 - 42 Daylight Daylight Saving Select “ ON ” to activate the daylight - saving function if you are in a daylight saving time zone (effective for NTP mode only), and then choose the starting time ,ending time and time adjustment.
38 Confi guration Video Type Users can select “NTSC” or “PAL” according requirement. Flicker by fluorescent light can be reduced by selecting PAL mode if the public p ower is 50Hz, or NTSC mode if the power is 60Hz. Figure 4 - 44 Video Type Note: Analog video output is not available.
39 Figure 4 - 48 Network Camera Reboot Event Log Click the buttons to display the desired logbooks or to delete all logs. Figure 4 - 49 Log Browse Information FW version and MAC address will be shown.
40 Miscellane ous Click the button . This camera contains free open sou r ce code. Figure 4 - 51 Miscellane ous.
41 5 S pecification s Operational Specifications Image device 1/2.7 - type Mega - pixel CMOS sensor Sensitivity Color: 0. 6 lx , B/W: 0. 6 lx ( 50 % F1.
42 Security Multiple user access levels with password protection Users 1 Administrator, 5 user s Video Access from Web Browser Full control of all camera settings available to administrator Minimum _ Web Browsing Requirements Windows XP or Windows 7 as O S , Internet Explorer Version 6.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC VN-T16/U è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC VN-T16/U - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC VN-T16/U imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC VN-T16/U ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC VN-T16/U, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC VN-T16/U.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC VN-T16/U. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC VN-T16/U insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
