Manuale d’uso / di manutenzione del prodotto VN-C2U del fabbricante JVC
Vai alla pagina of 30
VN-C2U V.NETWORKS INSTRUCTIONS SS961423-002 Thank you for purchasing the JVC VN-C1U. To gain maximum benefit from this product, read this instruction manual carefully before use and retain it for future reference. The serial number is very important for maintaining quality of your product.
1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Printed in Japan 11. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it form the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Printed in Japan 11. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it form the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
1 Package Contents Operational Environment This product is packaged with the following items. Contact your dealer of purchase for any missing items. VN-C2U main unit VN-C2U controller CD-ROM Ferrite core Instruction manual (this document) The following environment is necessary for the operation of VN-C2U.
2 Precautionary Notes Avoid installing in the following locations: • Where the unit is exposed to rain or water • Where the ambient temperature exceeds the range of 0 ∞ C ~ +40 ∞ C (recommende.
3 Installation and Setup Before starting installation and setup Since a setup of one IP address is necessary for each VN-C2U, follow the procedure given below to setup each unit (the installation can be made at the same time if the power is left off. 1.
4 Installation and Setup 1. Installation Install using the separately sold mounting kit (model no. VN-BK20). Do not turn the power on or connect to a network until installation is completed. (3) Mount VN-C2U on the bracket (1) Mount the bracket onto the ceiling, etc.
5 2. Connecting to a network Turn on the power of only one VN-C2U. Connecting VN-C2U to a network and turning on the power will connect the unit to a network with the following IP address. Note Factory set IP address : 192.168. 1. 2 All VN-C2U at the time of shipment have the same IP address.
6 3-1 Changing the IP address of the PC making the setting From the [Start] button proceed to [Setup] - [Control Panel] - [Network] to display the network setup panel. 3. VN-C2U IP address setup (1) Select TCP/IP and click Properties. (4) After clicking OK, reboot the PC.
7 3-2 Installing the software Insert the VN-C2U controller CD-ROM into the CD-ROM drive. The setup program is located in the JVC folder of the CD-ROM. Execute JVCSetup.
8 3-3 VN-C2U IP address setup The V.NETWORKS setup tool is located in the JVCsetup folder of the CD-ROM. Execute JVCsetupvsetup.exe (execute directly from the CD-ROM). For an explanation of the password button, see the following page. Set appropriate values for the sub-net mask during the setting.
9 Password protection feature VN-C2U is equipped with an access protection feature using a password to regulate connecting PCs (users). This password can be set or canceled using the V.NETWORKS setup tool. Note Never forget the password since the password setting can only be changed and canceled when the current password matches.
10 Notes The V.NETWORKS setup tool will only operate on PCs installed using the procedure described on page 7 (execution of setup.exe). The setup tool will not operate properly if setup.exe has not been executed. For PCs that have executed setup.exe can also operate the setup tool by copying the setup folder to the hard disk, etc.
11 5. Registering the connection point Start up the VN-C2U controller (VN-C2U connection software: vn-c2u.exe). Execute [Create New] from the [File] menu to set the connection point. To make correction after completing registration, first delete all settings then re-register.
12 Operating the Controller Software Establishing Connection and changing the connection point For the installation procedure, see page 7 Installing the software. When the VN-C2U controller: vn- c2u.exe is started up, a splash logo will appear, followed by the following screen.
13 Controller 1 The VN-C2U screen will immediately appear when connection is established. The currently connected VN-C2U name, angle steps of the pan/tilt, and pan/tilt positions will be displayed. The connected VN-C2U angle steps of the pan/tilt can be changed using the right and left arrow buttons ( and ).
14 Controller 2 Controller (small) In case the VN-C2U controller screen is too large to fit in the screen, click here to reduce the controller size. Clicking this button will switch the screen alternately between large and small. The VN-C2U main unit is equipped with 6 position memories.
15 Controller 3 Creating a new connection point See page 11 Registering a connection point Placing the mouse pointer on the VN- C2U and waiting momentarily will display the VN-C2U name in a form of a balloon display. The entire VN-C2U name will appear in the balloon display, even for long names.
16 Deleting a connection point Note Connection point settings cannot be restored once they are deleted. Take special caution when making deletions. Select [Delete] from the [File] menu. Select the connection point, then click OK. Check the content to delete, then click OK.
17 Changing the display size and inverting the image Adjusting the image quality For details on the image sensor settings, see the following page. Select the image size. The displayed image can also be inverted. Used to set the unit to the factory settings.
18 Image sensor settings The VN-C2U uses a CMOS image sensor as an imaging device. It is possible to adjust the image by changing the image sensor settings.
19 Specifying the transmitted number of frames Changing the position memory Notes The actual number of frames per second transmitted or displayed is influenced by the performance of the PC, image compression ration and LAN environment.
20 Still image save feature With the VN-C2U controller, a desired snapshot of the displayed image can be taken and saved as a JPEG image file. Click the Snapshot button.
21 You forgot or misplaced the VN- C2U IP address changed using the V.NETWORKS setup tool. Record of contents changed using the V.NETWORKS setup tool is saved in a file named vsetup.
22 The image is out of focus. The focus can be adjusted by following the procedure given below. 1.Set the pan and tilt positions to 0˚,0˚. 2.Remove the lens cover. 3.Loosen the screw locking the lens block. Note:For your safety, turn off the power before loosening the screw.
23 When there is a problem with the tint. The image size changed or the position shifted automatically. ·Check the color adjustments of the display and video card. The tint may vary slightly depending on the display monitor and the video card of the PC.
24 Specifications LAN specification : IEEE802.3 standard Communication protocol : UDP/IP Image sensor : 1/3 inch, 300,000 pixels CMOS image sensor M.O.D. : 1.0 m Pan/Tilt angles : Pan :100 ˚ Tilt :80 ˚ Output image size : 640 X 480, 320 X 240, 160 X 120 pixels Line voltage : DC 5 V Demand current : 1.
VICTOR COMPANY OF JAPAN, LIMITED VN-C2U V.NETWORKS Printed in Japan SS961423-002 COPYRIGHT ©1999 VICTOR COMP ANY OF JAP AN, L TD ..
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC VN-C2U è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC VN-C2U - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC VN-C2U imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC VN-C2U ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC VN-C2U, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC VN-C2U.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC VN-C2U. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC VN-C2U insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
