Manuale d’uso / di manutenzione del prodotto UX-H35 del fabbricante JVC
Vai alla pagina of 28
For Customer Use: Enter below the Model No . and Serial No. which are located either on the rear , bot- tom or side of the cabinet. Retain this inf or mation f or future reference .
G-1 W arnings, Cautions and Others CA UTION— (standby/on) b utton! Disconnect the mains plug to shut the pow er off completely (all lamps and indications go off). The (standby/on) b utton in any position does not disconnect the mains line. • When the unit is on standby , the ST ANDBY lamp lights red.
G-2 Front vie w CA UTION: Proper Ventilation T o av oid risk of electr ic shock and fire , and to prev ent damage, locate the apparatus as f ollows: 1 F ront: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown b y the dimensions below .
1 Introduction About This Manual This manual is organized as follo ws: • The manual mainly explains operations using the buttons on the r emote control. Y ou can use the buttons both on the r emote control and on the main unit f or the same operations if they ha ve the same or similar names (or marks), unless mentioned otherwise.
2 Contents Location of the Buttons ............................................... 3 Main Unit .......................................................................... 3 Remote Control ................................................................
3 MICRO COMPONENT SYSTEM STANDBY w q e r t T op view Front view TIMER/SNOOZE MUL TI CONTROL ONE TOUCH REC AHB PRO VOLUME AUX T APE CD TUNER BAND COMPACT DIGITAL AUDIO PHONES 4 ¢ 7 OPEN 9 7 p 1 2 5 6 8 4 3 Become familiar with the buttons on y our unit.
4 Main unit 1 PHONES jack (11) 2 Disc cov er 3 TIMER/SNOOZE button (10, 20 – 22) 4 ONE T OUCH REC (recording) button (18, 19) 5 (standby/on) button (11, 21) 6 Source buttons • A UX, @ # T APE, B AND TUNER, and # / 8 CD Pr essing one of these buttons also turns on the unit.
5 Remote Control See the pages in parentheses for details. 1 Number buttons 2 BASS b utton (11) 3 Multi control buttons • UP , 4 (re verse skip), 7 (stop), ¢ (forward skip), and DO WN 4 SET button (13) 5 Source buttons • 3 / 8 CD, 2 3 T APE, TUNER, and A UX Pr essing one of these buttons also turns on the unit.
6 Getting Started Supplied Accessories Make sure that you hav e all the following items. The number in parentheses indicates the quantity of each piece supplied. • AM loop antenna (1) • FM antenna (1) • A C power cord (1) • Remote control (1) • Batteries (2) If anything is missing, consult your dealer immediately .
7 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 2 T ur n the AM loop antenna until you hav e the best reception. T o connect an outdoor AM antenna When reception is poor , connect a single vinyl-co vered wire to the AM EXT terminal and extend it horizontally .
8 Speaker grille T o remove the speaker g rille, insert your fingers at the top of the speaker grille, pull to wards you. Then pull the bottom tow ards you. T o attach the speaker grille, follow the illustration abo ve . Connecting Other Equipment T o connect an audio equipment Y ou can connect audio equipment — used only as a playback device.
9 Putting the Batteries into the Remote Control Insert the batteries — R6(SUM-3)/AA(15F) — into the remote control, by matching the polarity (+ and – ) on the batteries with the + and – markings on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.
10 Common Operations Setting the Clock Before operating the unit any further , first set the unit ’ s clock. When y ou plug in the power cord, the CLOCK indicator and “ 0:00 ” start flashing on the display . Y ou can set the clock whether the unit is on or off.
11 Adjusting the T one (Bass/T reble) Y ou can adjust the bass le vel (low fr equency range) and the treble lev el (high frequency range) within a range of – 5 to +5. When shipped, the bass le vel set to “ B ASS 0 ” and the treble lev el set to “ TREBLE +1.
12 T uning in to a Station 1 Press TUNER (or BAND TUNER on the unit) to select the band. The unit automatically turns on and tunes in to the previously recei ved station — either FM or AM. • Each time you press the button, the band alternates between FM and AM.
13 T o preset stations manually — Manual presetting Y ou need to preset stations separately for the FM and AM bands. • There is a time limit in doing the follo wing steps. If the setting is canceled before you finish, start o ver from step 2 . On the remote control ONL Y : 1 T une in to the station y ou want to preset.
14 Playing Back Discs This unit has been designed to play back the following discs—CD, CD-R, and CD-R W . When playing a CD-R or CD-RW User-edited CD-Rs (CD-Recordable) and CD-R Ws (CD-ReWritable) can be played only if they are already “finalized.
15 Basic Disc Operations While playing a disc, you can do the following operations. T o stop playing for a moment During play , press 3 / 8 CD. While pausing, the elapsed playing time flashes on the display . T o resume playing, press 3 / 8 CD again. T o go to another track Before or during play , press ¢ or 4 repeatedly .
16 T o skip the current track, press ¢ . • Y ou cannot go back to the previous track by pressing 4 . T o stop playing, press 7 . T o exit from Random Play , press RANDOM before or after playing. Random Play is canceled and Normal Play resumes. • The RANDOM indicator goes off.
17 Playing Back T apes Y ou can play back type I tapes. Playing Back a T ape 1 Press ) f or cassette deck on the unit. The cassette holder opens. 2 Put a cassette in with the exposed part of the tape down. 3 Close the cassette holder cover gently . 4 Press 2 3 T APE.
18 Recording 2 Close the cassette holder gently and check the recording dir ection for the tape. • If the tape direction is not correct, press 2 3 T APE twice then 7 to change the tape direction. • If you want to record on both sides of a tape, see “T o record on both sides—Reverse Mode.
19 Disc Direct Recording Everything on the disc goes onto the tape in the order it is on the disc, or according to the order you hav e set in Program Play . On the unit ONL Y : 1 Put a recordable cassette in with the exposed part of the tape down. 2 Load a disc.
20 Using the T imers There are four timers av aila ble—Daily T imer, Recording T imer, Snooze T imer , and Sleep T imer . Before using the timers, you need to set the unit’ s clock (see page 10). Using Daily Timer and Recor ding Timer Y ou can set the timer whether the unit is on or off.
21 4 Select the timer (Daily Timer or Recording Timer) with the source to play . On the remote control: Press UP or DOWN to select the timer , then press CLOCK/TIMER.
22 Using Sleep Timer W ith the Sleep T imer, you can f all asleep to music. Y ou can set the Sleep T imer when the unit is turned on. How the Sleep Timer actually works The unit automatically turns of f after the specified time length passes. On the remote contr ol ONL Y : 1 Press SLEEP .
23 Maintenance T o get the best perf ormance from the unit, k eep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette.
24 T r oubleshooting If you are having a problem with your unit, check this list for a possible solution before calling f or service. If you cannot solve the problem from the hints gi ven here, or the unit has been physically damaged, call a qualif ied person, such as your dealer , for service.
EN 0403MWMMDWJEM © 2003 VICT OR COMP ANY OF JAP AN, LIMITED VICT OR COMP ANY OF JAP AN, LIMITED COVER_UX-H35[A]f.pm6 03.2.26, 11:57 AM 2.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC UX-H35 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC UX-H35 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC UX-H35 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC UX-H35 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC UX-H35, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC UX-H35.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC UX-H35. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC UX-H35 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
