Manuale d’uso / di manutenzione del prodotto RX-7001PGD del fabbricante JVC
Vai alla pagina of 58
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
Caution –– STANDBY/ON switch! Disconnect the mains plug to shut the power off completely. The STANDBY/ON switch in any position does not disconnect the mains line. The power can be remote controlled. Precaución –– Interruptor STANDBY/ON ! Desconectar el cable de alimentación para desactivar la alimentación totalmente.
G-2 Español English Português Caution: Proper V entilation T o avoide risk of electric shock and fire and to protect from damage. Locate the apparatus as follows: Front: No obstructions open spacing. Sides: No obstructions in 10 cm from the sides. T op: No obstructions in 10 cm from the top.
1 English T able of Contents Parts Identification ...................................... 2 Getting Started ........................................... 3 Before Installation ...................................................................... 3 Checking the Supplied Accessories .
2 English Par ts Identification Become familiar with the buttons and controls on the receiver before use. Refer to the pages in parentheses for details.
3 English ANTENNA AM EXT AM LOOP FM 75 COAXIAL AM LOOP ANTENNA AM EXT FM 75 C O A X IA L AM LOOP ANTENNA AM EXT FM 75 C O A X IA L Getting Star ted This section explains how to connect audio/video components and speakers to the receiver , and how to connect the power supply .
4 English Basic connecting procedur e 1 Cut, twist and r emove the insulation at the end of each speaker signal cable (not supplied). 2 T urn the knob counterc loc kwise.
5 English About the speaker impedance The required speaker impedance of the front speakers does dif fer depending on whether both the FR ONT SPEAKERS 1 and FRONT SPEAKERS 2 terminals are used or only one of them is used.
6 English RIGHT LEFT T APE /MD IN (PLA Y) OUT (REC) CD PHONO AUDIO To audio output CD player Cassette deck or MD recorder To audio input Cassette deck To audio output RIGHT LEFT T APE /MD IN (PLA Y) O.
7 English RIGHT VIDEO VIDEO S-VIDEO RIGHT LEFT A UDIO MONITOR OUT VCR IN (PLA Y) OUT (REC) TV SOUND /DBS DV D TV and/or DBS tuner When connecting the TV, DO NOT connect the TV’s video output to these video input terminals. Connect the TV to the MONIT OR OUT jack to vie w the playbac k picture from the other connected video components.
8 English DIGITAL OUT PCM/DOLBY DIGITAL/MPEG/DTS DVD DIGITAL IN DIGITAL 3 (TV) DIGITAL 2 (CD) DIGITAL 1 (DVD) PCM / DOLBY DIGITAL MPEG/ DTS DBS Digital connections This receiv er is equipped with three DIGIT AL IN terminals — one digital coaxial terminal and two digital optical terminals, and one DIGIT AL OUT terminal.
9 English 3 1 2 R6P(SUM-3)/AA(15F) Connecting the Power Cord Before plugging the receiv er into an A C outlet, make sure that all connections hav e been made. Plug the power cord into an A C outlet. K ee p the power cord a way from the connecting cables and the antenna.
10 English Basic Operations The following operations are commonly used when you play any sound source. Fr om the remote contr ol: Press one of the sour ce selecting buttons.
11 English Signal and speaker indicators on the display • The signal indicators light up to indicate the incoming channel signals. – Only the indicators for the incoming signals light up.
12 English Listening only with headphones Y ou can listen with the headphones without deactiv ating both pairs of speakers; ho wever , if you want to use the HEADPHONE mode (see belo w), you must turn off both pairs of speakers. 1. Connect a pair of headphones to the PHONES jack on the front panel .
13 English Basic Settings Some of the following settings are required after connecting and positioning your speakers in your listening room, while others will make operations easier .
14 English 3. Repeat steps 1 and 2 to select the appropr ia te items f or the other speakers. Notes: • K eep the following comment in mind as ref erence when adjusting. – If the size of the cone speaker unit b uilt in your speak er is greater than 12 cm, select “LARGE, ” and if it is smaller than 12 cm, select “SMALL.
15 English 2. T ur n MUL TI JOG to select the delay time of the rear speak er output. • T urn it clockwise to increase the delay time from 0 msec (“R. DELA Y : 0ms”) to 15 msec (“R. DELA Y : 15ms”). • T urn it counterclockwise to decrease the delay time from 15 msec (“R.
16 English Digital Input (DIGIT AL IN) T erminal Setting When you use the digital input terminals, you ha ve to register what components are connected to which terminals (DIGIT AL IN 1/2/3). Bef ore you start, r emember ... • There is a time limit in doing the follo wing steps.
17 English MULTI JOG NORMAL TEXT STANDBY STANDBY/ON and TUNER PRESET STANDBY STANDBY/ON and FM MODE ONE TOUCH OPERATION SLEEP 20 10 30 40 50 60 70 80 90 (Canceled) 00 SETTING Showing the T ext Infor m.
18 English Receiving Radio Broadcasts Y ou can browse through all the stations or use the preset function to go immediately to a par ticular station. MULTI JOG TUNER /SEA MEMORY AUDIO/ TV/VCR CATV/DBS Using Preset T uning Once a station is assigned to a channel number , the station can be quickly tuned.
19 English Note: When using the FM MODE button on the remote control, be sure that the 10 ke ys are activated f or the tuner , not for the CD and others. (See page 43.) Assigning Names to Preset Stations Y ou can assign a name of up to four characters to each preset station.
20 English Using the SEA Modes The SEA (Sound Effect Amplifier) modes give you control of the way your music sounds. IMPORT ANT : When using the remote control, check to see if its remote control mode selector is set to the correct position: T o operate this receiver, set it to “AUDIO/TV/ VCR.
21 English Using the DSP Modes The built-in Surround Processor provides three types of the DSP (Digital Signal Processor) mode — 3D-PHONIC mode, DAP (Digital Acoustic Processor) mode and Surround mode.
22 English Notes: • The DSP modes have no eff ect on monaural sources. • When you select “D VD MUL TI” as the source to pla y , you cannot select or adjust the DSP modes. • The Ÿ PRO LOGIC indicator lights up when the Dolby Pro Logic decoder built in this receiver is activated.
23 English A vailable DSP modes Each time you press DSP MODE on the front panel or SURR OUND MODE on the remote control, the DSP modes change as follows: Speaker arrangements Front speaker TV Front sp.
24 English IMPORT ANT : When using the remote control, check to see if its remote control mode selector is set to the correct position: T o operate this receiver, set it to “AUDIO/TV/ VCR.” Adjusting the 3D-PHONIC Modes Once you hav e adjusted the 3D-PHONIC modes, the adjustment is memorized for each 3D-PHONIC mode.
25 English 3. Adjust the effect lev el. 1) Press (B ALANCE/) SURROUND ADJUST repeatedl y until “DSP EFFECT” appears on the display . The display changes to sho w the current setting.
26 English 4. Adjust the speaker output lev els. • T o adjust the center speaker le vel, press CENTER –/+ (from –10 dB to +10 dB). • T o adjust the left rear speaker le vel, press REAR•L –/+ (from –10 dB to +10 dB). • T o adjust the right rear speaker le vel, press REAR•R –/+ (from –10 dB to +10 dB).
27 English 5. Press TEST again to stop the test tone. 6. Press EFFECT to select an effect le vel you want. • Each time you press the b utton, the effect le vel changes as follows: As the number increases, JVC Theater Surround becomes stronger . On the front panel: Y ou can also use the buttons on the front panel to adjust the Surround modes.
28 English For the other DSP modes On the front panel: 1. Press DSP MODE r epeatedly until the mode y ou want appears on the display . • Each time you press the b utton, the DSP modes change. (See page 23 for more details.) 2. Select and play a sound source.
29 English Using the DVD MUL TI Playback Mode This receiver provides the DVD MUL TI playback mode for reproducing the analog discrete output mode of the DVD player .
30 English Using the On-Scr een Menus Y ou can use the Menus on the TV screen to control the receiver . T o use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the TV’ s input mode to the proper position to which the receiver is connected.
31 English Adjusting the Subwoofer Output Level (Also see page 12) 1. Press MENU . The MAIN MENU appears on the TV . • Pressing one of the % / fi / @ / # b uttons also displays the MAIN MENU. 2. Press % / fi to mo ve to “SOUND CONTR OL, ” then press @ / # .
32 English 6. Press % / fi to mo ve to the item you want to set or adjust, then press @ / # . On this adjustment menu, you can do the following: “CENTER LEVEL”: Adjust the center speaker output le vel. “REAR L LEVEL”: Adjust the left rear speaker output le vel.
33 English 4. Press % / fi to mov e to “SEA ADJUST . ” The SEA ADJUST menu appears. 5. Press % / fi / @ / # to adjust the SEA mode as y ou want. @ / # : Select the frequency ranges. % / fi : Adjust the frequenc y levels. 6. Press SET to stor e the setting into the SEA USERMODE.
34 English 6. Press % / fi to mo ve to “PRESET NAME, ” then press SET . The character entry screen appears. 7. Press % / fi / @ / # to move in fr ont of a character y ou want. Y ou can also select the following: : T o enter space : T o erase the character : T o go back to the previous character position or go to the next character position 8.
35 English COMPU LINK Remote Contr ol System The COMPU LINK remote control system allows you to operate JVC audio components through the remote sensor on the receiver .
36 English TEXT COMPU LINK Remote Contr ol System The TEXT COMPU LINK remote control system has been newly developed to deal with the disc information recorded in the CD T ext * and MDs. Using these information in the discs, you can operate the CD player or MD recorder equipped with the TEXT COMPU LINK remote control system through the receiver .
37 English On-Screen Operation buttons (on the remote control) 1 Source name: CD or MD 2 Select or , then press SET to change the disc. 3 T rack numbers and track titles. • The current playing (selected) track is indicated in yello w . • When you move to a track number , you can change the track information by pressing @ / # .
38 English Sear ch for a disc by its disc title: 1. Press TEXT DISPLA Y while “CD” is selected as the source. The Disc Information screen appears on the TV . 2. Press % / fi to mo ve to “SEARCH, ” then press SET . The DISC SEARCH screen appears.
39 English Entering the Disc Information For the CD Player with the disc memory function: Y ou can use the disc memory function through this receiver . The disc information (its performer , disc title, and music genre) of normal audio CDs will be stored into the memory built in the CD player .
40 English For the MD recor der: Y ou can write the disc information (disc title and song titles) into the disc. Y ou can only write the song title for the song currently selected.
41 English A V COMPU LINK Remote Contr ol System The A V COMPU LINK remote control system allows you to operate JVC video components (TV , VCR, and DVD player) through the receiver . T o use this remote control system, you need to connect the video components you want to operate, follo wing the diagrams below and the procedure on the next page.
42 English One-T ouch DVD Play Simply by starting playback on the D VD player , you can enjoy the D VD playback without setting other switches manually .
43 English T uner Y ou can always perform the following operations (with the remote control mode selector set to “ A UDIO/TV/VCR”): FM/AM : Alternates between FM and AM.
44 English CD player -changer After pressing CD-DISC (with the remote control mode selector set to “ A UDIO/TV/VCR”), you can perform the following operations on a CD player-changer: PLA Y : Starts playing. 4 4 4 4 4 : Returns to the beginning of the cur rent (or pr evious) track.
45 English Operating Video Components IMPORT ANT: T o operate JVC’s video components using this remote control: • Y ou need to connect JVC video components through the A V COMPU LINK terminals (see page 41) in addition to the connections using cables with RCA pin plugs (see pages 6 and 7).
46 English Operating Other Manufacturers’ V ideo Equipment This remote control supplied with the recei ver can transmit control signals for other manufacturers’ VCRs, TVs, CA TV con verters and DBS tuners.
47 English T o change the transmittable signals for operating a CA TV conver ter or DBS tuner 1. Set the remote contr ol mode to “CA TV/DBS. ” 2. Press and hold TV/CA TV/DBS . 3. Press TV/DBS. 4. Enter manufacturer’ s code (three digits) using buttons 1 – 9, and 0.
48 English Manufacturers’ codes for TV A -Mark 003 Acura 009 Admiral 093 Aiko 092 Akai 030, 208 Akura 264 Alaron 216 Alba 009, 036, 037 Amstrad 009, 037 Anam 003, 004, 009, 068, 161, 250, 425, 426 A.
49 English Simpson 186 Sky-Worth 037 Sonitron 208 Sonoko 009, 037 Sonolor 208 Sontec 037 Sony 000, 036 Soundesign 178, 186 Soundwave 037 Spectricon 003 Standard 009 SuperTech 216 Supreme 000 Sylvania .
50 English Dual 041 Dumont 000, 081, 104 Dynatech 000 Elbe 038 Elcatech 072 Electrohome 037 Electrophonic 037 Emerex 032 Emerson 000, 037, 043, 061, 278 ESC 240, 278 Ferguson 041, 320 Fidelity 000 Fin.
51 English Manufacturers’ codes listed on pages 48 to 51 are subject to change without notice. If they are chang ed, this remote control cannot operate the equipment.
52 English T r oubleshooting Use this char t to help you solve daily operational problems. If there is any problem you cannot solve, contact your JVC ser vice center . PROBLEM The display does not light up. No sound from speakers. Sound from one speaker only.
53 English Amplifier Output Power At Stereo operation: Front channels: 100 W* per channel, min. RMS, both channels dri ven into 8 Ω at 1 kHz with no more than 0.9% total harmonic distortion. (IEC268-3/DIN) At Surround operation: Front channels: 100 W* per channel, min.
54 English FM tuner (IHF) T uning Range: 87.50 MHz to 108.00 MHz Usable Sensiti vity: Monaural: 12.8 dBf (1.2 µV/75 Ω ) 50 dB Quieting Sensitivity: Monaural: 21.
EN, SP, PR, CH 0600HIMMDWJEIN Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia and U.K.) Instrucción sobre la línea de la red (CA) (no aplicable para Europa, EE.UU., Canadá, Australia, ni el Reino Unido) Instrução sobre a tensão da rede eléctrica (CA) (não aplicável para a Europa, os E.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC RX-7001PGD è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC RX-7001PGD - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC RX-7001PGD imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC RX-7001PGD ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC RX-7001PGD, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC RX-7001PGD.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC RX-7001PGD. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC RX-7001PGD insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
