Manuale d’uso / di manutenzione del prodotto RS-WP1WT del fabbricante JVC
Vai alla pagina of 25
CD POR T ABLE SYSTEM CHAINE POR T ABLE A CD For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet.
English G-2 W arnings, Cautions and Others / Mises en garde, pr é cautions et indications diverses INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
English G-3 Fran ç ais 1. CLASS 1 LASER PRODUCT 2. DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualitied service personnel.
Notes • This Unit may generate noise depending on the positioning of the AC adaptor. Place the Unit and AC adaptor as shown in the figure. • This Unit has two remote sensors, one on the front panel and the other on the rear panel.
English 2 Features ....................................................................... 2 How This Manual Is Organized .................................. 2 IMPORTANT CAUTIONS ............................................. 2 Getting Started .........
English 3 Getting Star ted S L E E P CLOCK TIMER TIMER ON/OFF PRO GRAM RAN DOM REPEAT BAND DISPLAY A HB PRO REVERS E MODE M U L T I C O N T R O L FM M O D E REW FF RM - S R S W P 1 U R E M O T E C O N.
English 4 V O L U M E V O L U M E A U X T U N E R T A P E C D A S P O P E N O N E T O U C H R E C M U L T I C O N T R O L REW FF STANDBY CD PORTABLE SYSTEM RS-WP1 BAND STANDBY/ON A .
English 5 “ R20/D (13F) ” size batteries Connecting the AC Adaptor Cor d Firmly insert the supplied AC adaptor cord into the DC IN jack on the back of the System. DC IN 12V AC adaptor cord To wall outlet Note: This Unit may generate noise depending on the positioning of the AC adaptor.
English 6 On the Unit CD 6 button TAPE 23 button TUNER B AND button AUX button On the Remote Control CD 6 button TAPE 23 button TUNER BAND button AUX button Hook the claw around the projected part.
English 7 T urning the Power On and Off Note: The lighting condition for the “ STANDBY ” indicator and the display differs depending on the power source being used, as follows: Turning the System On ————— Press the STANDBY/ON button on the Unit or the Remote Control.
English 8 Showing the Time (DISPLA Y) In Standby mode, the backlight of the display goes out, and the “ CLOCK ” indicator and the current time (clock) appear on the display. While the power is turned on, you can see the current time (clock) at any time, as follows: Press the DISPLAY button on the Remote Control.
English 9 You can listen to FM and AM stations. Stations can be tuned in manually, automatically, or from preset memory storage. ■ Before listening to the radio: • Fully extend the FM telescopic antenna. One Touch Radio ———————— • This operation is effective only when the System is operated on AC power or car battery.
English 10 Pr esetting Stations You can preset up to 30 FM stations and up to 15 AM stations. Note: Preset numbers may have been set to factory test frequencies prior to shipment. This is not a malfunction. You can preset the stations you want into memory by following one of the presetting methods below: Manual Presetting 1.
English 11 To stop playing the CD, press the 7 button. The following information for the CD is displayed. To pause, press the CD 6 button. The playback time blinks on the display. To cancel pause, press the same button again. Play continues from the point where it was paused.
English 12 To Select a Track ———————— During playback, press the 4 or ¢ button to select the track you want. The selected track starts playing. • Press the ¢ button once to skip to the beginning of the next track. • Press the 4 button to skip to the beginning of the track being played.
English 13 Using the Cassette Deck (Listening to a T ape) The Cassette Deck allows you to play and record audio tapes. ■ With Automatic Tape Detection, you can listen to type I, II or IV tapes without having to change any settings.
English 14 Using the Cassette Deck (Recor ding) Recording onto a tape from any of the sound sources is simple. Just place a tape in the Cassette Deck, have the source ready, make one or two settings, and you ’ re ready to record. For each source the procedure is a little bit different so we explain each separately.
English 15 2. If you want to record on both sides of the tape, press the REVERSE MODE button on the Remote Control to set the System in Reverse mode. Press the button until indicator is lit. Even when the reverse mode is set to before starting recording, the tape stops automatically at the end of the reverse side of tape.
English 16 Listening to an Auxiliary Equipment Listening to Auxiliary Equipment You can listen to an auxiliary equipment. ■ First make sure that the auxiliary equipment is properly connected to the System. (See page 4). 1. Set the volume level to minimum.
English 17 Using the Timers The timers let you control listening and recording functions automatically. Setting the Clock When you supply the power using one of the following ways, the “ CLOCK ” indicator blinks and “ AM12:00 ” appears on the display.
English 18 ■ 3. Setting the OFF time (Example: PM1:30). 1. Set the OFF time by pressing the UP or DOWN button. Pressing and holding the button will change the time rapidly. 2. Press the SET button. The music source “ TUNER ” blinks on the display.
English 19 Handle your CDs carefully, and they will last a long time. Compact Discs • Only CDs bearing this mark can be used with this System. However, continued use of irregular shape CDs (heart-shape, octagonal, etc.
English 20 Action • Check all connections and make corrections. (See page 4.) • Disconnect the headphones. Cover the holes on the back edge of the cassette with tape. Fully extend the FM telescopic antenna and turn it for the best reception. Clean or replace the CD.
English 21 Amplifier Output Power 12 W per channel, min. RMS, at 4 Ω from 150 Hz to 15 kHz with no more than 10% total harmonic distortion (for U.S.A.
0201SKMWSTJEM EN VICTOR COMP ANY OF JAP AN, LIMITED.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC RS-WP1WT è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC RS-WP1WT - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC RS-WP1WT imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC RS-WP1WT ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC RS-WP1WT, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC RS-WP1WT.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC RS-WP1WT. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC RS-WP1WT insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
