Manuale d’uso / di manutenzione del prodotto MX-G50 del fabbricante JVC
Vai alla pagina of 28
For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No. LVT0692-001A [J] INSTRUCTIONS MX-G50 — Consists of CA-MXG50 and SP-MXG50.
– G-1 – W arnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION T o reduce the risk of electrical shocks , fire, etc.: 1. Do not remove scre ws, cov ers or cabinet. 2. Do not expose this appliance to r ain or moisture.
– G-2 – For Canada/pour le Canada CA UTION: TO PREVENT ELECTRIC SHOCK, MA TCH WIDE BLADE OF PLUG T O WIDE SLO T , FULL Y INSER T . A TTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE D ANS LA BORNE CORRESPOND ANTE DE LA PRISE ET POUSSER JUSQU A U FOND .
– 1 – Introduction About This Manual This manual is org anized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
– 2 – Contents Location of the Buttons and Contr ols ....................... 3 Front Panel ................................................................. 3 Remote Control .......................................................... 5 Getting Started .
– 3 – Location of the Buttons and Controls Become familiar with the b uttons and controls on your unit. Front Panel ST ANDBY/ON ST ANDBY PLA Y & EXCHANGE DISC CHANGE SOUND MODE SUBWOOFER LEVEL.
– 4 – See pages in the parentheses for details. Front Panel 1 Carrousel 2 ST ANDBY/ON button and ST ANDBY lamp (9) 3 7 (stop) b utton (12 – 17) 4 SET button (9, 11, 13, 18 – 20) 5 CANCEL button (9, 14, 19, 20) DEMO button (8) 6 Display windo w 7 T APE 3 button and lamp (9, 15, 17) Pr essing this button also turns on the unit.
– 5 – Remote Control Remote Control 1 ST ANDBY/ON b utton (9) 2 SLEEP button (20) 3 A UX button (9) Pr essing this button also turns on the unit. 4 Number buttons (11, 13) 5 T APE 3 button (9, 15) Pr essing this button also turns on the unit. 6 FM/AM button (9, 11) Pr essing this button also turns on the unit.
– 6 – Getting Started Unpacking After unpacking, check to be sure that you ha ve all the follo wing items. The number in the parentheses indicates the quantity of the pieces supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) If any is missing, consult your dealer immediately .
– 7 – MAIN SPEAKER SUBWOOFER 4-8 [ ] 6-16 [ ] RR LL 1 Pr ess and hold the clamp of the AM terminals on the r ear of the unit. 2 Insert the end of the AM loop antenna cord into the terminal. 3 Release the f inger from the clamp. 4 T urn the AM loop antenna until y ou hav e the best r ece ption.
– 8 – DIGIT AL OUT OPTICAL ( ) For pla ying the other equipment through this unit, connect between the audio output jacks on the other equipment and A UX IN jacks by using audio cords (not supplied). T o audio output T o connect audio equipment with an optical digital input terminal Y ou can record CD sound onto the connected digital equipment.
– 9 – Common Operations T urning On or Off the Power T o tur n on the unit, press ST ANDBY/ON so that the ST ANDBY lamp goes of f. T o tur n off the unit (on standby), press ST ANDBY/ON again so that the ST ANDBY lamp lights up. A little power is al ways consumed ev en while the unit is on standby .
– 10 – Selecting the Sound Modes This function only af fects the playback sound, but does not affect y our recording. Y ou can select one of the 6 preset sound modes (3 surround modes and 3 SEA — Sound Effect Amplif ier — modes). T o select the sound modes, turn the SOUND MODE control until the sound mode you want appears on the display .
– 11 – Listening to FM and AM Broadcasts T uning in a Station 1 Pr ess FM/AM. The unit automatically turns on and tunes in the pre viously tuned station (either FM or AM). • Each time you press the button, the band alternates between FM and AM. 2 Start searching f or stations.
– 12 – Playing Back CDs This unit has been designed to playback the CDs: Audio CD, CD-R and CD-R W . Continued use of irregular shape CDs (heart-shape, octagonal, etc.) can damage the unit. When playing a CD-R or CD-R W User -edited CD-Rs (Recordable) and CD-R Ws (Re writable) can be played back only if they are already “finalized”.
– 13 – CD playback sequence (when ALL DISC is selected) When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.
– 14 – T o stop during play , press 7 . • Random play also stops when 0 is pressed. T o exit fr om Random play mode, press RANDOM again during play so that the unit enters Continuous play mode. T o use Random play mode , you hav e to cancel the Program play mode.
– 15 – Playing Back T apes Playing Back a T ape 1 Pr ess EJECT ( 0 ) for the deck y ou want to use. 2 Put a cassette in, with the exposed part of the tape down. • Y ou can play back only type I. 3 Close the cassette holder gently . If you put cassettes in both decks A and B, the last deck which you hav e put a cassette into is selected.
– 16 – Recording Recording a T ape on Deck B On the unit ONL Y : 1 Press EJECT 0 f or the deck B. 2 Put in a recordab le cassette, with the exposed part of the tape down. 3 Close the cassette holder gently . 4 Start playing the source — FM, AM, CD player or auxiliary equipment connected to A UX IN jacks.
– 17 – CD Synchro Recording Y ou can easily record a CD onto a tape. • Y ou can also record the tracks in order you hav e made the program. On the unit ONL Y : 1 Put a recordable cassette into deck B. 2 Place a disc correctl y on the circle of the disc tray , with its label side up.
– 18 – Using the T imers There are three timers a vailable — Daily Timer , Recording T imer , and Sleep T imer . Before using the timers, you need to set the clock built in the unit. (See “Setting the Clock” on page 9.) Using Daily Timer W ith Daily T imer , you can wake to your fa vorite music or radio program.
– 19 – DAILY Canceled ON TIME ON TIME CLOCK (See page 9.) REC 6 Select the pr eset station number . Press 4 or ¢ to select the preset station number , then press SET . The unit enters volume setting mode. 7 Pr ess 4 or ¢ to set the volume le vel.
– 20 – Recording Timer 7:00 6:30 Sleep Timer 7:30 AM 6:00 Using Sleep Timer W ith Sleep T imer , you can fall asleep to music. Y ou can set Sleep T imer when the unit is turned on. How Sleep Timer actually works The unit automatically turns of f after the specified time length passes.
– 21 – Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating. • If the tape is loose, it may get stretched, cut, or caught in the cassette.
– 22 – Specifications Amplifier section — CA-MXG50 Output P ower SUBWOOFERS: 80 W per channel, min. RMS, driven into 6 Ω at 63 Hz with no more than 10% total harmonic distortion. MAIN SPEAKERS:40 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion.
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and production of the wide array of JVC products, service is the key to maintaining the high level of performance for which JVC is world famous.
LIMITED W ARRANTY A UDIO-1 JVC COMP ANY OF AMERICA warrants this product and all parts thereof, e xcept as set for th below ONL Y T O THE ORIGINAL PURCHASER A T RET AIL to be FREE FROM DEFECTIVE MA TERIAL AND WORKMANSHIP from the date of original retail purchase f or the per iod as shown below .
VICTOR COMP ANY OF JAP AN , LIMITED 1200KSMMDWSAM EN J V C MX-G50[J].COVER_f 00.12.22, 5:15 PM 2.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC MX-G50 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC MX-G50 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC MX-G50 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC MX-G50 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC MX-G50, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC MX-G50.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC MX-G50. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC MX-G50 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
