Manuale d’uso / di manutenzione del prodotto LVT1507-012A del fabbricante JVC
Vai alla pagina of 35
TA/NEWS/INFO DISPLAY MODE LVT1507-012A [US] RX-5062S A UDIO/VIDEO CONTR OL RECEIVER INSTR UCTIONS English Cover_RX-5062S[US].p65 06.2.2, 14:01 3.
G-1 W arnings, Cautions, and Others / CAUTION • Do not bloc k the ventilation openings or holes . (If the ventilation openings or holes are b locked by a newspaper or cloth, etc., the heat ma y not be able to get out.) • Do not place any nak ed flame sources, such as lighted candles, on the apparatus .
1 English T able of Contents Adjusting Sound ........................................ 21 Basic Adjustment Items ............................................................ 21 Basic Procedure ...........................................................
2 English Front Panel Par ts Identification STANDBY STANDBY/ON PHONES SURROUND DSP SPEAKERS ON/OFF SUBWOOFER OUT FM MODE MEMORY ON/OFF FM/AM TUNING SURROUND/DSP OFF DIMMER MASTER VOLUME INPUT DIGITAL .
3 English Remote Control A UDIO TV VCR DV D TEST EFFECT MENU ENTER LEVEL RETURN SURROUND/ DSP CD - DISC SLEEP REC P AUSE FM MODE SURROUND DSP DIMMER TV/VIDEO MUTING OFF VCR CH TV CH VOLUME SURR R SURR.
4 English Connecting the FM and AM Antennas FM antenna connections Connect the supplied FM antenna as temporary measure to the FM 75 Ω CO AXIAL terminal— A If rece ption is poor , connect the outdoor FM antenna (not supplied)— B 1 Disconnect the supplied FM antenna.
5 English Connecting the Speakers and Subwoofer Y ou can connect fi ve speakers (a pair of front speakers, a center speaker , and a pair of surround speakers) and a subwoofer . CA UTIONS: • Use only the speakers of the SPEAKER IMPED ANCE indicated by the speak er ter minals.
6 English Connecting Audio/V ideo Components When connecting individual components, refer also to the manuals supplied with them. Analog Connections Audio component connections Use the cables with RCA pin plugs (not supplied). • Connect the white plug to the audio left jack, and the red plug to the audio right jack.
7 English DVD player Å To composite video output ı To left/right front channel audio output (or to audio-mixed output if necessary) Note: To enjoy Dolb y Digital and DTS multi-channel softw are (including Dual Mono software), connect the D VD pla yer through the digital input/ output terminals.
8 English DIGIT AL 1(DVD) DIGIT AL 2(CD) DIGIT AL IN Digital Connections By connecting the recei ver and the source component through the digital terminals, sound reproduction quality will be much impro ved. In addition, you can enjoy multi-channel reproduction and some other con venient functions.
9 English Basic Operations The following operations are commonly used when you play any sound sources. Operations hereafter will be explained using the b uttons on the front panel. Y ou can also use the buttons on the remote control for the same functions if they ha ve the same and similar names/mar ks.
10 English Selecting different sour ces for picture and sound While watching pictures from a video source, you can listen to sound of an audio source. • Once you hav e selected a video source, pictures of the selected source are sent to the TV until you select another video source.
11 English Listening with headphones: Y ou can enjoy not only stereo software b ut also multi- channel software through the headphones. (Sounds are down-mix ed to the front channels while playing multi-channel software.) 1P r ess SPEAKERS ON/OFF to deactivate the speakers.
12 English When playing software encoded with Dolby Digital or DTS, the f ollowing symptoms ma y occur: • Sound does not come out at the beginning of playback. • Noise comes out while searching for or skipping chapters or tracks. In this case, press INPUT DIGIT AL repeatedly to select “ DOLBY DIGIT AL” or “DTS SURR OUND.
13 English The follo wing basic operations ar e possible only using the r emote contr ol. Muting the Sound Press MUTING to mute the sound thr ough all speakers and headphones connected. “MUTING” appears on the display and the volume turns of f (the V OLUME indicator and its level indication go of f).
14 English Using Preset T uning Once a station is assigned to a channel number , the station can be quickly tuned in. Y ou can preset up to 30 FM and 15 AM stations. To stor e the preset stations Bef ore y ou start, remember ... There is a time limit in doing the following ste ps.
15 English To tune in a pr eset station On the front panel: 1P r ess FM or AM to select the band. 2P r ess FM/AM PRESET 5 or ∞ until y ou find the channel y ou want. •P ressing FM/AM PRESET 5 increases the number . •P ressing FM/AM PRESET ∞ decreases the number .
16 English Quick Speaker Setup Quick Speaker Setup helps you to easily and quickly register the speaker size and speaker distance according to your listening room to create the best possible surround ef fect. •Y ou can also r egister each speak er’ s infor mation manually .
17 English Basic Setting Items On the following pa ges, you can adjust the following items: •Y ou can only select the items currently av ailab le. For details, see the explanation of each item. Items T o do See page SUBWOOFER * Register your subw oofer .
18 English ¶ Speaker distance — FRONT L DIST , FRONT R DIST , CENTER DIST , SURR L DIST , SURR R DIST Set the distance from the listening point within the r ange of 0.3 m (1 ft) to 9.0 m (30 ft), in 0.3 m (1 ft) interv als. •W hen shipped from the factory , distance for each speaker is set to “3.
19 English ¶ Cr ossover fr equency —CROSSOVER Y ou can select the crossover frequency f or the small speakers used. The signals belo w the preset frequency lev el will be sent to and be reproduced by the subwoofer (or by “LARGE” speak ers when “SUBWOOFER” is set to “SUBWOOFER NO”).
20 English Setting the Digital Input T er minals W hen you use the digital input ter minals, re gister which components y ou hav e connected to the digital input terminals. ¶ Digital Input ter minal —DIGIT AL IN Set the components connected to the digital terminals.
21 English Adjusting Sound Y ou can make sound adjustment to your preference after completing basic settings. Basic Procedur e Bef ore y ou start, remember ... T here is a time limit in doing the follo wing steps. If the setting is canceled before you f inish, start fr om step 1 again.
22 English Y ou can also use the remote control for adjusting the speaker output le vel using the test tone. •Y ou can also adjust the effect le vel f or D AP modes and Mono Film. To adjust the speaker output level: 1P r ess SOUND. The number buttons are acti vated for sound adjustments.
23 English Using the Sur r ound Modes This unit activates a variety of Surround modes automatically . The basic settings and adjustments stored (see pages 16 to 22) are applied automatically .
24 English DTS * 2 DTS is another digital signal compression method, dev eloped by Digital Theater Systems, Inc., and enables multi-channel encoding and decoding (1ch up to 6.1ch). • When DTS signal is detected through the digital input, the indicator lights up on the display .
25 English • F or DTS multi-channel digital software (except 2-channel and Dual Mono software), incoming signals are automatically detected and “DTS SURR OUND” is activ ated. Note: When the Dolby Digital or DTS multi-channel digital signal stops coming in, “PLII MO VIE” will be activ ated.
26 English : Suitable for audio sources : Suitable for video sources Using the DSP Modes This unit activates a variety of DSP modes automatically . The basic settings and adjustments stored (see pages 16 to 22) are applied automatically .
27 English DSP All Channel Stereo This mode can reproduce a larger stereo sound f ield using all the connected (and acti vated) speakers. • If the surround speakers ar e set to “NONE, ” y ou cannot select “ ALL CH STEREO.
28 English Operating JVC’ s Audio/V ideo Components Y ou can operate JVC’s audio and video components with this receiver’ s remote control, since control signals for JVC’ s components are preset in the remote control. T uner Y ou can always perform the follo wing opera tions: FM/AM: Alternate between FM and AM.
29 English Operating V ideo Components VCR Y ou can always perform the follo wing operations: ST ANDBY/ON VCR :T urn on or of f the VCR. VCR CH +/–: Change the TV channels on the VCR. After pressing VCR, you can perform the following operations on the VCR: 3 : Start playing.
30 English PROBLEM The display does not light up. No sound from speakers. “NO SUBWOOFER” appears on the display. Continuous hiss or buzzing during FM reception. Noise is heard during FM/AM reception. “OVERLOAD” starts flashing on the display. “DSP NG” appears on the display.
31 English Specifications Amplifier Output Po wer Front channels: 100 W per channel, min. RMS, dri ven into 8 Ω , at 1 kHz with no more than 10% total harmonic distortion. Center channel: 100 W , min. RMS, dri ven into 8 Ω , at 1 kHz with no more than 10% total harmonic distortion.
32 English Specifications FM tuner (IHF) T uning Range: 87.50 MHz to 108.00 MHz Usable Sensitivity Monaural: 12.8 dBf (1.2 µV/75 Ω ) 50 dB Quieting Sensitivity Monaural: 16.
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia and U.K.) VOLTAGE SELECTOR 220V 230V - 240V 127V 110V VOLTAGE SELECTOR 220V 230V - 240V 127V 110V CAUTION for mains (A.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC LVT1507-012A è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC LVT1507-012A - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC LVT1507-012A imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC LVT1507-012A ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC LVT1507-012A, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC LVT1507-012A.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC LVT1507-012A. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC LVT1507-012A insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
