Manuale d’uso / di manutenzione del prodotto KS-PD100 del fabbricante JVC
Vai alla pagina of 32
INTERFACE ADAPTER for iPod R KS-PD100 • iP od is a trademark of A p ple Com puter , Inc., r egistered in the U .S. and o ther countries. • Fo r installatio n and connectio ns, ref er to the separa te man ual. Thank you for purchasing a JVC product.
2 INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 Getting started General information • This adapter supports only JVC’s car receivers which meet the following conditions: – An MP3-compatible CD changer control is equipped – CD Text, MP3 fo.
4 Setting your receiver Before using the iPod through this adapter, make sure to select CD change r as the external inp ut settin g. • For details, see the PSM setting section in the instructions supplied with your receiver. Connecting the iPod to the adapter Connect the iPod connection cable to the dock connector on the iPod.
5 Checking the type of your receiver Operating procedures on the control panel and from the remote controller are different according to the type of the receiver. Check the type of your receiver by referring to the chart below. • If you are not sure about the type of your receiver, see the JVC web site <http://www.
6 Operations from the control panel—For Type A How the buttons on the control panel work as the iPod’s controls • : functions after MODE is pressed. To restore the original function, press MODE again. Selecting playback modes * 3 Repeat play * 4 : After pressing MODE , press 5 repeatedly to select a desired repeat mode.
7 Operations from the control panel—For Type B How the buttons on the control panel work as the iPod’s controls • : functions after MODE is pressed. To restore the original function, press MODE again. Selecting playback modes * 3 Repeat play * 4 : After pressing MODE , press 5 repeatedly to select a desired repeat mode.
8 Operations from the control panel—For Type C How the buttons on the control panel work as the iPod’s controls • : functions when you press and hold the button.
9 Operations from the control panel —For Type D (KD-NX901) How the buttons on the control panel work as the iPod’s controls • : functions after OK is pressed. To restore the original function, press OK again. • : functions when you press and hold the button.
10 How the buttons on the control panel work as the iPod’s controls • : functions after OK is pressed. To restore the original function, press OK again. • : functions when you press and hold the button. When selecting a track from the “Music” menu (See also page 11.
11 Selecting playback modes * 2 Repeat play * 3 : After pressing MODE , press 2 repeatedly to select a desired repeat mode. • Track: Functions same as “Repeat One” of the iPod. • Disc: Functions same as “Repeat All” of the iPod. To cancel, press MODE , then press 6 .
12 Operations from the remote controller • From the remote controller, playback mode selection is not available. Perform the operation on the control panel to select a playback mode. You can control the iPod using the remote controller supplied with your receiver.
13 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • The iPod is not turned on. Connections are incorrect. Check the connecting cable and its connection.
14 Specifications GENERAL Power Requirement: Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Current consumption: 18 mA (200 mA while charging the iPod) Allowab.
© 2005 Victor Company of Japan, Limited EN.
D. PLAYER INTERFACE ADAPTER KS-PD500 • Fo r installatio n and connectio ns, ref er to the separa te man ual. Thank you for purchasing a JVC product. Please read this manual carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
2 INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
3 Getting started General information • This adapter supports only JVC’s car receivers which meet the following conditions: – An MP3-compatible CD changer control is equipped – CD Text, MP3 folder/file names, or ID3 Tag is displayed • By using this adapter, you can operate the D.
4 Connectable D. player • You can control the D. player with the cradle connector through this adapter. For XA-HD500 (firmware version 1.00.0947) users: Before connecting the D. player to this adapter, update the firmware version of your D. player. Refer to “Update manual” for details about updating.
5 Checking the type of your receiver Operating procedures on the control panel and from the remote controller are different according to the type of the receiver. Check the type of your receiver by referring to the chart below. • If you are not sure about the type of your receiver, see the JVC web site <http://www.
6 Operations from the control panel—For Type A How the buttons on the control panel work as the D. player’s controls • : functions after MODE is pressed. To restore the original function, press MODE again. Selecting playback modes * 3 Repeat play * 4 : After pressing MODE , press 5 repeatedly to select a desired repeat mode.
7 Operations from the control panel—For Type B How the buttons on the control panel work as the D. player’s controls • : functions after MODE is pressed. To restore the original function, press MODE again. Selecting playback modes * 3 Repeat play * 4 : After pressing MODE , press 5 repeatedly to select a desired repeat mode.
8 Operations from the control panel—For Type C How the buttons on the control panel work as the D. player’s controls • : functions when you press and hold the button.
9 Operations from the control panel —For Type D (KD-NX901) How the buttons on the control panel work as the D. player’s controls • : functions after OK is pressed. To restore the original function, press OK again. • : functions when you press and hold the button.
10 How the buttons on the control panel work as the D. player’s controls • : functions after OK is pressed. To restore the original function, press OK again. • : functions when you press and hold the button. When selecting a track from the Top Menu (See also page 11.
11 Selecting playback modes * 2 Repeat play * 3 : After pressing MODE , press 2 repeatedly to select a desired repeat mode. • Track: Functions the same as “Repeat Mode One” of the D. player. • Disc: Functions the same as “Repeat Mode All” of the D.
12 (Enters the Top Menu) * 37 37 (Play/Stop) * (Moves back to the previous layer) * ENTER ENTER (Confirms the selection) * 5 5 (Selects the previous items) Skips previous 10 items ∞ ∞ (Selects the.
13 Selecting playback modes * 2 • Refer to the operation of playback modes section of the instructions supplied with the receiver. Repeat play * 3 : Select one of the followings: • Track: Functions the same as “Repeat Mode One” of the D. player.
14 Operations from the remote controller • From the remote controller, playback mode selection is not available. Perform the operation on the control panel to select a playback mode. You can control the D. player using the remote controller supplied with your receiver.
15 Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • The D. player does not turn on, or does not work. Firmware version needs to be updated. Update the firmware version of your D.
16 Specifications GENERAL Power Requirement: Operating Voltage: DC 14.4 V (11 V to 16 V allowance) Grounding System: Negative ground Current consumption: 18 mA (400 mA while charging the D.
© 2005 Victor Company of Japan, Limited EN.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC KS-PD100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC KS-PD100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC KS-PD100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC KS-PD100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC KS-PD100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC KS-PD100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC KS-PD100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC KS-PD100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
