Manuale d’uso / di manutenzione del prodotto KD-SH1000 del fabbricante JVC
Vai alla pagina of 282
ENGLISH ESPAÑOL FRANÇAIS CD RECEIVER KD-SH1000 RECEPTOR CON CD KD-SH1000 RECEPTEUR CD KD-SH1000 For canceling the display demonstration, see page 8 Para cancelar la demostración en pantalla, consul.
2 ENGLISH How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • If an SD card is inserted, eject the SD card first (see page 11). 1 2 • If this does not work, reset your unit. • Be careful not to drop the disc when it ejects.
ENGLISH 3 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to read this manual • Button operations are mainly explained with the illustrations in the table below.
4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly.
ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Disp.
6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
ENGLISH 7 Continued on the next page • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ . – Enters the main menu with 5 . (Now 5 / ∞ / 4 / ¢ work as the menu selecting buttons.) * 4 VOL (volume) + / – buttons Adjusts the volume level.
8 ENGLISH @ Adjust the sound as you want. (See pages 15 – 19.) To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 20 – 23. 1 Enter the PSM menu (see page 4).
ENGLISH 9 When an FM stereo broadcast is hard to receive 1 Enter the MODE menu (see page 4). 2 3 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 .
10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 When using the remote controller Directly select the preset number.
11 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc.
12 ENGLISH ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source.
13 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following.
14 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected.
15 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.
16 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective.
17 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other.
18 ENGLISH To cancel Crossover, repeat the same procedure. Make sure that “X-Over Off OK?” appears on the display. • indicator goes off. Setting the sound modes—SEL You can adjust the sound characteristics to your preference. ~ Enter the SEL menu (see page 4).
19 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 18) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off.
20 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items (except “Sirius ID”) listed in the table that follows.
21 ENGLISH Continued on the next page Indications Items Settings, [reference page] DST * 1 Daylight savings time • On [Initial] • Off : Activates daylight savings time if your residential area is subject to DST. : Cancels. Sirius ID * 3 SIRIUS ID : Your SIRIUS identification number appears on the display, [25].
22 ENGLISH Indications Items Settings, [reference page] Beep Key-touch tone • On [Initial] • Off : Activates the key-touch tone. : Deactivates the key-touch tone. Ext In * 5 External input • Changer [Initial] • Ext In : To use a JVC CD changer, [18], a JVC compatible satellite (SIRIUS/ XM) tuner, [25], or an Apple iPod or a JVC D.
23 ENGLISH Selecting timer for the dimmer You can dim the display at night or as you set the timer. 1 Select “Dimmer” from the PSM menu. 2 Select “Time Set.” 3 Adjust the dimmer time. 1 Set the dimmer start time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 2 Set the dimmer end time.
24 ENGLISH Title assignment You can assign titles to station frequencies, CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN).
25 ENGLISH Satellite radio operations This unit is satellite (SAT) Radio Ready— compatible with both SIRIUS Satellite radio and XM Satellite radio. Before operating your satellite radio: • For connection, see Installation/Connection Manual (separate volume).
26 ENGLISH Listening to the XM Satellite radio 1 2 3 Select a channel for listening. Holding the button changes the channels rapidly. Searching for category/channel You can search for programs by category (Category Search) or channel number (Channel Search).
27 ENGLISH 5 6 Select a user preset number. • You can move to the lists of the other SIRIUS bands by turning the control dial. 7 Store the channel. Listening to a user preset channel 1 2 • Holding this button displays the User Preset Channel List (see step 6 above).
28 ENGLISH Selecting a category/channel on the list Selecting a category from the list 1 Enter the MODE menu (see page 4). 2 Select “Category.” 3 4 Select a category you want. • You can move to the other lists b y turning the control dial. 5 Finish the procedure.
29 ENGLISH iPod®/D. player operations This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.
30 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track.
31 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
32 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
33 ENGLISH General • This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA format; MP3/WMA files recorded in an SD card or a USB memory. • While playing an audio CD: If a title has been assigned to the audio CD (see page 24), it will be shown on the display.
34 ENGLISH • This unit can play back the files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in elapsed time display, and do not show the actual elapsed time. Especially, after performing the search function, this difference becomes noticeable.
35 ENGLISH Changing the source • If you change the source, playback also stops. Next time you select the same source again, playback starts from where it has been stopped previously. Ejecting a disc • If the ejected disc is not removed within 15 seconds, the disc is automatically inserted again into the loading slot to protect it from dust.
36 ENGLISH Title assignment • If you try to assign titles to more than 30 station frequencies or 30 discs, “Name Full” appears. Delete unwanted titles before assignment. • Titles assigned to discs in the CD changer can also be shown if you play back the disc in the unit and vice versa.
ENGLISH 37 Available characters In addition to the Roman alphabets (A – Z, a – z), the following characters will be used. Accented letters: upper case Accented letters: lower case Preset frequency level settings for each sound mode Sound mode Preset equalizing value 63 Hz 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 12.
38 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display.
ENGLISH 39 Continued on the next page Symptoms Remedies/Causes MP3/WMA playback • A longer readout time is required (“File Check” keeps flashing on the display). Do not use too many hierarchies and folders. • Tracks do not play back in the order you have intended them to play.
40 ENGLISH Symptoms Remedies/Causes CD changer • “No Disc” appears on the display. Insert a disc into the magazine. • “No Magazine” appears on the display. Insert the magazine. • “Reset 8” appears on the display. Connect this unit and the CD changer correctly and press the reset button of the CD changer.
ENGLISH 41 Symptoms Remedies/Causes Satellite radio • “LOADING” appears on the display while listening to the XM Satellite radio. Select another channel or continue listening to the previous channel. • “Reset 08” appears on the display. The unit is loading the channel information and audio.
42 ENGLISH Specifications AUDIO AMPLIFIER SECTION Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal to Noise Ratio: 80 dBA (reference: 1 W into 4 Ω ) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Equalizer Control Range: Frequencies: Graphic EQ: 63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 12.
ENGLISH 43 CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 .
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR 0206DTSMDTJEIN © 2006 Victor Company of Japan, Limited Rear_SH1000J_001A_2.
1 KD-SH1000 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement GET0364-002A [J] J Handles Manijas Poignées F Washer (ø5) Arandela (ø5) Rondelle (ø.
INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
3 LINE IN (see diagram / véase el diagrama / voir le diagramme ) A Typical connections / Conexiones tipicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.
4 Connecting the external amplifiers and/or subwoofer / Conexión de los amplificadores y/o subwoofer externos / Connexion d’amplificateurs extérieurs et/ou d’un caisson de grave You can connect amplifiers to upgrade your car stereo system.
You can enjoy a world of “pure audio” in your car by connecting 3- way network speaker system (high-range/mid-range/subwoofer). IMPORTANT: If you have installed the 3-way network speaker system in the car, make sure of the following. • Connect the speaker system as illustrated below.
6 Other external component / Otro componente externo / Autre appareil extérieur CD changer jack Jack para el cambiador de CD Prise du changeur CD * 9 Line Input Adapter KS-U57 (not supplied for this .
ENGLISH For canceling the display demonstration, see page 8. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0365-001A [U/UH] KD-SH1000 CD RECEIVER KD-SH1000 Cover_SH1000U_001A_2.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 27 – 31). Press briefly. Press repeatedly.
4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly.
ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Disp.
6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
ENGLISH 7 Continued on the next page 3 5 (up) / ∞ (down) buttons • For FM/AM: Changes the preset stations. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ .
8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 20 – 22. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.
ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4).
10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 When using the remote controller Directly select the preset number.
11 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc.
12 ENGLISH ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source.
13 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following.
14 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected.
15 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.
16 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective.
17 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other.
18 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic.
19 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 18) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off.
20 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4).
21 ENGLISH Indications Items Settings, [reference page] Bright Display brightness 1 – 10 [Initial: 8] : Adjust the display contrast to make the display indications clear and legible. (If “Dimmer” is set to “On,” selecting “1” to “4“ takes no effect.
22 ENGLISH Selecting timer for the dimmer You can dim the display at night or as you set the timer. 1 Select “Dimmer” from the PSM menu. 2 Select “Time Set.” 3 Adjust the dimmer time. 1 Set the dimmer start time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 2 Set the dimmer end time.
23 ENGLISH Title assignment You can assign titles to station frequencies, CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN).
24 ENGLISH iPod®/D. player operations This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.
25 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track.
26 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
27 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
28 ENGLISH General • This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA format; MP3/WMA files recorded in an SD card or a USB memory. • While playing an audio CD: If a title has been assigned to the audio CD (see page 23), it will be shown on the display.
29 ENGLISH • This unit can recognize a total of 512 files, of 200 folders, and of 8 hierarchies. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriated format.
30 ENGLISH Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources. – Sources recorded with duets, strong echo, a chorus, or only a few instruments.
ENGLISH 31 Available characters In addition to the Roman alphabets (A – Z, a – z), the following characters will be used. Accented letters: upper case Accented letters: lower case Preset frequency level settings for each sound mode Sound mode Preset equalizing value 63 Hz 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 12.
32 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display.
ENGLISH 33 Continued on the next page Symptoms Remedies/Causes MP3/WMA playback • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.
34 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • “SD Loading Error” appears on the display while playing tracks from an SD card. Detach the control panel and reinsert the SD card. The control panel goes back to initial position (Angle 1).
ENGLISH 35 Symptoms Remedies/Causes iPod/D. player playback • No sound can be heard when connecting an iPod nano. Disconnect the headphones from the iPod nano. • No sound can be heard. • “ERROR 01” appears on the display when connecting a D.
36 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
ENGLISH 37 CD PLAYER SECTION MP3: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 48 kHz, 44.1 kHz, 33 kHz MPEG-2: 24 kHz, 22.05 kHz, 16 kHz WMA: Bit Rate: 8 kbps – 320 kbps Sampling Frequency: 48 kHz, 44.
© 2006 Victor Company of Japan, Limited EN, TH 0206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_SH1000U_001A_3.
KD-SH1000 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß 0206DTSMDTJEIN EN, TH 1 ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
ELECTRICAL CONNECTIONS °“√‡™◊ËÕ¡‚¥¬„™È ‰øøÈ“ A Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the external amplifiers and/or subwoofer / µËÕ·Õ¡æ≈‘ø“¬‡ÕÕ√Ï·≈– / À√◊Õ´—∫«Ÿø‡øÕ√ϥȓππÕ° You can connect amplifiers to upgrade your car stereo system.
5 §ÿ≥“¡“√∂‡æ≈‘¥‡æ≈‘π°—∫‚≈°¢Õß “√–∫∫‡’¬ß¡∫Ÿ√≥Ï·∫∫” „π√∂¬πµÏ‰¥È ¥È«¬°“√µËÕ√–∫∫≈”.
6 Other external component / Õÿª°√≥Ï¿“¬πÕ°Õ◊ËπÊ * 8 AUX Input Adapter KS-U58 (not supplied for this unit) * 8 Õ–·¥ª‡µÕ√Ï√—∫—≠≠“≥ AUX √ÿËπ KS-.
ENGLISH INDONESIA CD RECEIVER KD-SH1000 ALA T PENERIMA CD KD-SH1000 For canceling the display demonstration, see page 8. U nt uk membatalka n tampila n demonstrasi, liha t halaman 8. For installation and connections, refer to the separate manual. Untuk instalasi dan penyambungan, lihat buku pedoman terpisah.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 27 – 31). Press briefly. Press repeatedly.
4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly.
ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Disp.
6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
ENGLISH 7 Continued on the next page 3 5 (up) / ∞ (down) buttons • For FM/AM: Changes the preset stations. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ .
8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 20 – 22. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.
ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4).
10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 When using the remote controller Directly select the preset number.
11 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc.
12 ENGLISH ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source.
13 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following.
14 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected.
15 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.
16 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective.
17 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other.
18 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic.
19 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 18) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off.
20 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4).
21 ENGLISH Indications Items Settings, [reference page] Bright Display brightness 1 – 10 [Initial: 8] : Adjust the display contrast to make the display indications clear and legible. (If “Dimmer” is set to “On,” selecting “1” to “4“ takes no effect.
22 ENGLISH Selecting timer for the dimmer You can dim the display at night or as you set the timer. 1 Select “Dimmer” from the PSM menu. 2 Select “Time Set.” 3 Adjust the dimmer time. 1 Set the dimmer start time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 2 Set the dimmer end time.
23 ENGLISH Title assignment You can assign titles to station frequencies, CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN).
24 ENGLISH iPod®/D. player operations This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.
25 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track.
26 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
27 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
28 ENGLISH General • This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA format; MP3/WMA files recorded in an SD card or a USB memory. • While playing an audio CD: If a title has been assigned to the audio CD (see page 23), it will be shown on the display.
29 ENGLISH • This unit can recognize a total of 512 files, of 200 folders, and of 8 hierarchies. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriated format.
30 ENGLISH Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources. – Sources recorded with duets, strong echo, a chorus, or only a few instruments.
ENGLISH 31 Available characters In addition to the Roman alphabets (A – Z, a – z), the following characters will be used. Accented letters: upper case Accented letters: lower case Preset frequency level settings for each sound mode Sound mode Preset equalizing value 63 Hz 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 12.
32 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display.
ENGLISH 33 Continued on the next page Symptoms Remedies/Causes MP3/WMA playback • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.
34 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • “SD Loading Error” appears on the display while playing tracks from an SD card. Detach the control panel and reinsert the SD card. The control panel goes back to initial position (Angle 1).
ENGLISH 35 Symptoms Remedies/Causes iPod/D. player playback • No sound can be heard when connecting an iPod nano. Disconnect the headphones from the iPod nano. • No sound can be heard. • “ERROR 01” appears on the display when connecting a D.
36 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
ENGLISH 37 CD PLAYER SECTION MP3: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 48 kHz, 44.1 kHz, 33 kHz MPEG-2: 24 kHz, 22.05 kHz, 16 kHz WMA: Bit Rate: 8 kbps – 320 kbps Sampling Frequency: 48 kHz, 44.
© 2006 Victor Company of Japan, Limited EN, IN 0206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Ada MASALAH dengan cara pengoperasian? Setel kembali unit Anda Lihat halaman mengenai Bagaimana mereset unit anda Rear_SH1000U_004A_f.
KD-SH1000 Installation/Connection Manual Manual Pemasangan/Penyambungan 0206DTSMDTJEIN EN, IN 1 ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
ELECTRICAL CONNECTIONS SAMBUNGAN-SAMBUNGAN LISTRIK A Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the external amplifiers and/or subwoofer / Penyambungan penguat eksternal dan/atau subwoofer You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
5 Anda dapat menikmati sebuah dunia dari “audio murni” dalam mobil Anda dengan menyambungkan sistem speaker 3-arah (cakupan-tinggi/cakupan-sedang/subwoofer). PENTING: Jika Anda telah memasang sistem speaker 3-arah dalam mobil Anda, pastikan hal-hal berikut: • Sambungkan sistem speaker, seperti diilustrasikan di bawah.
6 Other external component / Komponen eksternal lainnya * 8 AUX Input Adapter KS-U58 (not supplied for this unit) * 8 Adapter Input AUX KS-U58 (tidak disediakan untuk alat penerima ini) • Set “Ext In” for the external input setting (See page 21 of the INSTRUCTIONS.
ENGLISH CD RECEIVER KD-SH1000 KD-SH1000 For canceling the display demonstration, see page 8. For installation and connections, refer to the separate manual.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 27 – 31). Press briefly. Press repeatedly.
4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly.
ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Disp.
6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
ENGLISH 7 Continued on the next page 3 5 (up) / ∞ (down) buttons • For FM/AM: Changes the preset stations. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ .
8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 20 – 22. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.
ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4).
10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 When using the remote controller Directly select the preset number.
11 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc.
12 ENGLISH ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory. All tracks in the USB memory will be played repeatedly until you change the source.
13 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following.
14 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected.
15 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.
16 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective.
17 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other.
18 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic.
19 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 18) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off.
20 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4).
21 ENGLISH Indications Items Settings, [reference page] Bright Display brightness 1 – 10 [Initial: 8] : Adjust the display contrast to make the display indications clear and legible. (If “Dimmer” is set to “On,” selecting “1” to “4“ takes no effect.
22 ENGLISH Selecting timer for the dimmer You can dim the display at night or as you set the timer. 1 Select “Dimmer” from the PSM menu. 2 Select “Time Set.” 3 Adjust the dimmer time. 1 Set the dimmer start time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 2 Set the dimmer end time.
23 ENGLISH Title assignment You can assign titles to station frequencies, CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN).
24 ENGLISH iPod®/D. player operations This unit is ready for operating an Apple iPod or a JVC D. player from the control panel. Before operating your iPod or D. player: Connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.
25 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track.
26 ENGLISH Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
27 ENGLISH To keep discs clean A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge. • Do not use any solvent (for example, conventional record cleaner, spray, thinner, benzine, etc.
28 ENGLISH General • This unit has been designed to reproduce CDs/CD Texts, and CD-Rs (Recordable)/ CD-RWs (Rewritable) in audio CD (CD-DA) and MP3/WMA format; MP3/WMA files recorded in an SD card or a USB memory. • While playing an audio CD: If a title has been assigned to the audio CD (see page 23), it will be shown on the display.
29 ENGLISH • This unit can recognize a total of 512 files, of 200 folders, and of 8 hierarchies. • This unit cannot play back the following files: – MP3 files encoded with MP3i and MP3 PRO format. – MP3 files encoded in an inappropriated format.
30 ENGLISH Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources. – Sources recorded with duets, strong echo, a chorus, or only a few instruments.
ENGLISH 31 Available characters In addition to the Roman alphabets (A – Z, a – z), the following characters will be used. Accented letters: upper case Accented letters: lower case Preset frequency level settings for each sound mode Sound mode Preset equalizing value 63 Hz 125 Hz 250 Hz 500 Hz 1 kHz 2 kHz 4 kHz 8 kHz 12.
32 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display.
ENGLISH 33 Continued on the next page Symptoms Remedies/Causes MP3/WMA playback • Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in the format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.
34 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • “SD Loading Error” appears on the display while playing tracks from an SD card. Detach the control panel and reinsert the SD card. The control panel goes back to initial position (Angle 1).
ENGLISH 35 Symptoms Remedies/Causes iPod/D. player playback • No sound can be heard when connecting an iPod nano. Disconnect the headphones from the iPod nano. • No sound can be heard. • “ERROR 01” appears on the display when connecting a D.
36 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
ENGLISH 37 CD PLAYER SECTION MP3: Bit Rate: 32 kbps – 320 kbps Sampling Frequency: MPEG-1: 48 kHz, 44.1 kHz, 33 kHz MPEG-2: 24 kHz, 22.05 kHz, 16 kHz WMA: Bit Rate: 8 kbps – 320 kbps Sampling Frequency: 48 kHz, 44.
© 2006 Victor Company of Japan, Limited EN, CT 0206DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_SH1000U_005A_f.
KD-SH1000 Installation/Connection Manual ϰ༬ો˿̱ 0206DTSMDTJEIN EN, CT 1 ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
ELECTRICAL CONNECTIONS ྑཕો A Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Connecting the external amplifiers and/or subwoofer / ો͚ો؟ʩወ֝ / චࡍљࡗಚᑶወ You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
5 ̣̈́ʒಙᑵԦăਢƄˀƄඟࡌјࡖಙᑵĄ̣۔ϚڄԆԾՙīঝଶڄࡖ ᛏĬ̛ߍé ࡍ࠲! ϩشલϛԇԿϰ༬ʓಚᑶወԧèቂᇨׇ̤ʔ౧ᓮê • Ϩ.
6 Other external component / յ̨͚ોஈέ * 8 AUX Input Adapter KS-U58 (not supplied for this unit) * 8 AUX ᎔ʈቱ KS-U58 ( ʿᎲʹጅಏա ) • Set “Ext In” for the external input setting (See page 21 of the INSTRUCTIONS.
ENGLISH FRANÇAIS CD RECEIVER RECEPTEUR CD KD-SH1000 For installation and connections, refer to the separate manual. Pour l’installation et les raccordements, se référer au manuel séparé. INSTRUCTIONS MANUEL D’INSTRUCTIONS GET0366-003A [EX/EU] For canceling the display demonstration, see page 8.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 34 – 38). Press briefly. Press repeatedly.
4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly.
ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Disp.
6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
ENGLISH 7 Continued on the next page 2 SOURCE button Selects the source. 3 5 (up) / ∞ (down) buttons • For DAB: Changes the service. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ .
8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 23 – 26. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.
ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4).
10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 Enter the MODE menu (see page 4).
11 ENGLISH Continued on the next page FM RDS operations What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals.
12 ENGLISH 5 Store the setting. 6 To store other PTY codes into other preset numbers. 7 Finish the procedure. Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM.
13 ENGLISH Tracing the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).
14 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc.
15 ENGLISH Continued on the next page ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory.
16 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following.
17 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected.
18 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.
19 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective.
20 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other.
21 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic.
22 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 21) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off.
23 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4).
24 ENGLISH Indications Items Settings, [reference page] Dimmer • Auto [Initial] • Time Set • Off • On : Dims the display when you turn on the headlights. : Sets the timer for dimmer, see page 25 for setting. From: Any hour; To: Any hour : Cancels.
25 ENGLISH 2 Set the dimmer end time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 4 Finish the procedure. Indications Items Settings, [reference page] Beep Key-touch tone • On [Initial] • Off : Activates the key-touch tone.
26 ENGLISH Title assignment You can assign titles to CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN). Sources Maximum number of characters CDs/CD-CH * Up to 32 characters (up to 30 discs) External component Up to 16 characters * You cannot assign names to any discs other than conventional CDs.
27 ENGLISH 3 Move to the next (or previous) character position. 4 Repeat steps 1 and 3 until you finish entering the title. 4 Finish the procedure. • To cancel the title entry without registration, press MENU. To erase the entire title In step 3 ...
28 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track.
29 ENGLISH Selecting the playback modes 1 Enter the MODE menu (see page 4). 2 Select one of the playback modes. 3 Select an item (see table below). 4 Finish the procedure. Repeat play One : Functions the same as “Repeat One” of the iPod or “Repeat Mode = One” for the D.
30 ENGLISH 4 Finish the procedure. • The DRC indicator will be highlighted only when receiving DRC signals from the tuned service. To search for your favorite service You can search for either Dynamic or Static PTY codes. • Operations are exactly the same as explained on pages 11 and 12 for FM RDS stations.
31 ENGLISH 5 Store the service. When using the remote controller After tuning in to a service you want to preset... Tuning in to a preset DAB service 1 2 Enter the MODE menu (see page 4). 3 Select “List.” 4 Select a preset number. • You can move to the lists of the other DAB bands by turning the control dial.
32 ENGLISH When shipped from the factory, Alternative Frequency Reception is activated. To deactivate the Alternative Frequency Reception, see page 24. To show the Dynamic Label Segment (DLS) information • The DLS screen will be temporarily canceled when you operate the unit.
33 ENGLISH Continued on the next page Other external component operations You can connect an external component to the LINE IN plugs on the rear or to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied).
34 ENGLISH More about this unit Basic operations Turning on the power • By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback also starts.
35 ENGLISH • Message service requires the RDS Radiotext signal. It is available on most major stations. If reception is weak, the service may become unavailable. For any questions regarding the content of this service, please contact your broadcaster.
36 ENGLISH – Romeo * : up to 128 (72) characters – Joliet * : up to 64 (36) characters – Windows long file name * : up to 128 (72) characters * The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more.
ENGLISH 37 Continued on the next page Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources.
38 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display.
ENGLISH 39 Continued on the next page Symptoms Remedies/Causes Disc playback • Disc cannot be played back. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CD-RW cannot be skipped. • Insert a finalized CD-R/CD-RW.
40 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • “File Check” keeps flashing on the display.
ENGLISH 41 Symptoms Remedies/Causes iPod/D. player playback • The iPod or D. player does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • Buttons do not work as intended.
42 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
ENGLISH 43 CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 .
EN, FR 0106DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre appareil Référez-vous à la page intitulée Comment réinitialiser votre appareil © 2006 Victor Company of Japan, Limited Rear_SH1000_003A_3.
KD-SH1000 Installation/Connection Manual Manuel d’installation/raccordement 0106DTSMDTJEIN EN, FR 1 ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers.
INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
Line out (see diagram ) Sortie de ligne (voir le diagramme ) Rear ground terminal Borne arrière de masse 15 A fuse Fusible 15 A Black Noir Blue with white stripe Bleu avec bande blanche Red Rouge Yel.
4 Connecting the external amplifiers and/or subwoofer / Connexion d’amplificateurs extérieurs et/ou caisson de grave You can connect amplifiers to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
Vous pouvez recréer un monde de “son pur” dans votre voiture en connectant un système d’enceintes à trois voies (hautes fréquences/moyennes fréquences/extrêmes graves). IMPORTANT: Si vous avez installé un système d’enceintes à trois voies dans votre voiture, assurez-vous de ce qui suit.
or ou JVC DAB tuner Tuner DAB JVC JVC CD changer Changeur CD JVC Apple iPod (separately purchased) iPod Apple (vendu séparément) JVC D. player (separately purchased) Lecteur D.
ENGLISH DEUTSCH РУCCKИЙ CD RECEIVER CD-RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ KD-SH1000 For installation and connections, refer to the separate manual. Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
2 ENGLISH Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • Some related tips and notes are explained in “More about this unit” (see pages 34 – 38). Press briefly. Press repeatedly.
4 ENGLISH How to enter the various menus The main menu contains seven menus (MODE, PSM, SEL, TITLE, BBE, EQ, DSP). • If no operation is done for about 5 seconds, menu screen is canceled. 1 2 Select a menu you want. 3 Enter the selected menu. • To go back to the previous screen or exit the MENU screen, press BACK repeatedly.
ENGLISH 5 How to change the display information and patterns 1 BAND button 2 SOURCE button 3 • Control dial • POWER/ATT (attenuator)/ENTER button 4 MENU button 5 5 (up) / ∞ (down) buttons 6 Disp.
6 ENGLISH Remote controller — RM-RK300 Installing the lithium coin battery (CR2025) Aim the remote controller directly at the remote sensor on the unit. Make sure there is no obstacle in between. Warning: • Do not install any battery other than CR2025 or its equivalent; otherwise, it may explode.
ENGLISH 7 Continued on the next page 2 SOURCE button Selects the source. 3 5 (up) / ∞ (down) buttons • For DAB: Changes the service. • For MP3/WMA/SD/USB: Changes the folders. • While listening to an Apple iPod ® or a JVC D. player: – Pauses/stops or resumes playback with ∞ .
8 ENGLISH To drop the volume in a moment (ATT) To restore the sound, press it again. To turn off the power Basic settings • See also “General settings — PSM” on pages 23 – 26. 1 Enter the PSM menu (see page 4). 2 1 Canceling the display demonstrations Select “Demo,” then “Off.
ENGLISH 9 4 MO indicator lights up. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure and select “Off” in step 3 . The MO indicator goes off. Tuning in to FM stations with strong signals only—LO (local)/DX (Distance- Extreme) 1 Enter the MODE menu (see page 4).
10 ENGLISH 4 5 6 Select a preset number. • You can move to the lists of the other FM bands by turning the control dial. 7 Store the station. When using the remote controller After tuning in to a station you want to preset... Listening to a preset station 1 2 Enter the MODE menu (see page 4).
11 ENGLISH Continued on the next page FM RDS operations What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular programme signals.
12 ENGLISH 5 Store the setting. 6 To store other PTY codes into other preset numbers. 7 Finish the procedure. Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM.
13 ENGLISH Tracing the same programme— Network-Tracking Reception When driving in an area where FM reception is not sufficient enough, this unit automatically tunes in to another FM RDS station of the same network, possibly broadcasting the same programme with stronger signals (see the illustration below).
14 ENGLISH Disc/SD card/USB memory operations Playing a disc in the unit All tracks will be played repeatedly until you change the source or eject the disc. To stop play and eject the disc Note: If a USB memory is attached to the unit, you cannot eject the disc.
15 ENGLISH Continued on the next page ! Attach the control panel. ⁄ • The control panel goes back to the previous position. Playback starts automatically if tracks are recorded. Playing from a USB memory This unit can play MP3/WMA tracks stored in a USB memory.
16 ENGLISH To go to the next or previous tracks To go to the next or previous folders (only for MP3/WMA/SD/USB) For MP3 tracks: For WMA tracks: • Holding the buttons can display the Disc List ( ) and Folder List ( / / ), see the following.
17 ENGLISH Prohibiting disc ejection You can lock a disc in the loading slot. 1 2 After making sure “No Eject?” is selected... • “No Eject” flashes, and the disc cannot be ejected. To cancel the prohibition, repeat the same procedure after making sure “Eject OK?” is selected.
18 ENGLISH To make more precise settings, see the following. To cancel the acoustic effect, select “Defeat” in step Ÿ . Precise settings for the DSP modes 1 Select a DSP mode. 2 Select the number of the built-in speakers. • For “Defeat” and “V.
19 ENGLISH 3 Finish the procedure. Using the equalizer—EQ You can adjust the sound equalization patterns to your preference by using either Graphic EQ or Parametric EQ. • Adjust the equalizer to match the reproducible frequency range of the connected speakers; otherwise, the adjustments may not be effective.
20 ENGLISH 3 Select a band. Band1 : 20.0 Hz – 1.2 kHz Band2 : 80.0 Hz – 5.0 kHz Band3 : 315.0 Hz – 20 kHz 4 Adjust the enhanced level for the selected band. 5 Select the frequency. • Band 1/2/3 are required to be preset at least 5 steps (frequencies) away from each other.
21 ENGLISH Activating crossover network By activating crossover network, you can allocate different frequency range of sound signals to different speakers to match their characteristic.
22 ENGLISH To adjust reproduced frequency level—X-Over This setting is available only when crossover network (see page 21) is activated. 1 Select a filter. HPF (Front/Rear) : Frequencies lower than the selected level are cut-off. LPF (Rear) : Frequencies higher than the selected level are cut-off.
23 ENGLISH 3 Select or adjust the selected PSM item. 4 Repeat steps 2 and 3 to adjust the other PSM items if necessary. 5 Finish the procedure. You can change PSM (Preferred Setting Mode) items listed in the table that follows. 1 Enter the PSM menu (see page 4).
24 ENGLISH Indications Items Settings, [reference page] Dimmer • Auto [Initial] • Time Set • Off • On : Dims the display when you turn on the headlights. : Sets the timer for dimmer, see page 25 for setting. From: Any hour; To: Any hour : Cancels.
25 ENGLISH 2 Set the dimmer end time. 24Hours : [0 – 23] 12Hours : [1A (1AM) – 12A (12AM); 1P (1PM) – 12P (12PM)] 4 Finish the procedure. Indications Items Settings, [reference page] Beep Key-touch tone • On [Initial] • Off : Activates the key-touch tone.
26 ENGLISH Title assignment You can assign titles to CDs (both in this unit and in the CD changer) and the external components (LINE-IN and EXT-IN). Sources Maximum number of characters CDs/CD-CH * Up to 32 characters (up to 30 discs) External component Up to 16 characters * You cannot assign names to any discs other than conventional CDs.
27 ENGLISH 3 Move to the next (or previous) character position. 4 Repeat steps 1 and 3 until you finish entering the title. 4 Finish the procedure. • To cancel the title entry without registration, press MENU. To erase the entire title In step 3 ...
28 ENGLISH Selecting a track from the menu 1 Enter the main menu. Now the 5 / ∞ / 4 / ¢ buttons work as the menu selecting buttons * . * The menu selecting mode will be canceled: – If no operations are done for about 5 seconds. – When you confirm the selection of a track.
29 ENGLISH Selecting the playback modes 1 Enter the MODE menu (see page 4). 2 Select one of the playback modes. 3 Select an item (see table below). 4 Finish the procedure. Repeat play One : Functions the same as “Repeat One” of the iPod or “Repeat Mode = One” for the D.
30 ENGLISH 4 Finish the procedure. • The DRC indicator will be highlighted only when receiving DRC signals from the tuned service. To search for your favorite service You can search for either Dynamic or Static PTY codes. • Operations are exactly the same as explained on pages 11 and 12 for FM RDS stations.
31 ENGLISH 5 Store the service. When using the remote controller After tuning in to a service you want to preset... Tuning in to a preset DAB service 1 2 Enter the MODE menu (see page 4). 3 Select “List.” 4 Select a preset number. • You can move to the lists of the other DAB bands by turning the control dial.
32 ENGLISH When shipped from the factory, Alternative Frequency Reception is activated. To deactivate the Alternative Frequency Reception, see page 24. To show the Dynamic Label Segment (DLS) information • The DLS screen will be temporarily canceled when you operate the unit.
33 ENGLISH Continued on the next page Other external component operations You can connect an external component to the LINE IN plugs on the rear or to the CD changer jack on the rear using the Line Input Adapter—KS-U57 (not supplied) or AUX Input Adapter—KS-U58 (not supplied).
34 ENGLISH More about this unit Basic operations Turning on the power • By pressing SOURCE on the unit, you can also turn on the power. If the source is ready, playback also starts.
35 ENGLISH • Message service requires the RDS Radiotext signal. It is available on most major stations. If reception is weak, the service may become unavailable. For any questions regarding the content of this service, please contact your broadcaster.
36 ENGLISH – Romeo * : up to 128 (72) characters – Joliet * : up to 64 (36) characters – Windows long file name * : up to 128 (72) characters * The parenthetic figure is the maximum number of characters for file/folder names in case the total number of files and folders is 313 or more.
ENGLISH 37 Continued on the next page Sound adjustments Selecting the DSP modes—DSP • Effectiveness of “V.Cancel” depends on the recording condition of the sources: – Monaural sources such as AM and monaural FM broadcasting programs. – Multiplex sound sources.
38 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). • “Connect Error” appears on the display.
ENGLISH 39 Continued on the next page Symptoms Remedies/Causes Disc playback • Disc cannot be played back. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/CD-RW cannot be skipped. • Insert a finalized CD-R/CD-RW.
40 ENGLISH Symptoms Remedies/Causes SD card/USB memory playback • Noise is generated. The track played back is not an MP3/WMA track. Skip to another file. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • “File Check” keeps flashing on the display.
ENGLISH 41 Symptoms Remedies/Causes iPod/D. player playback • The iPod or D. player does not turn on or does not work. • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • Buttons do not work as intended.
42 ENGLISH Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.
ENGLISH 43 CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 .
EN, GE, RU 0106DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Se.
KD-SH1000 Installation/Connection Manual Einbau/Anschlußanleitung Руководство по установке/подключению 0106DTSMDTJEIN EN, GE, RU ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems .
INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
A * 5 Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on. * 5 Vor der Überprüfung der Funktionsfähigkeit des Geräts vor dem Einbau, muß diese Leitung angeschlossen werden, da sonst die Stromversorgung nicht eingeschaltet werden kann.
C Connecting the external amplifiers and/or subwoofer / Anschließen der externen Verstärker und/oder Subwoofer / Подключение внешних усилителей и/или низкочастотного динамика You can connect amplifiers to upgrade your car stereo system.
You can enjoy a world of “pure audio” in your car by connecting 3- way network speaker system (high-range/mid-range/subwoofer). IMPORTANT: If you have installed the 3-way network speaker system in the car, make sure of the following. • Connect the speaker system as illustrated below.
CAUTION / ACHTUNG / ПРЕДОСТЕРЕЖЕНИЕ: • Before connecting the external components, make sure that the unit is turned off. • Vor dem Anschließen der externen Komponenten sicherstellen, dass das Gerät ausgeschaltet ist.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC KD-SH1000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC KD-SH1000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC KD-SH1000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC KD-SH1000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC KD-SH1000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC KD-SH1000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC KD-SH1000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC KD-SH1000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
