Manuale d’uso / di manutenzione del prodotto KD-G162 del fabbricante JVC
Vai alla pagina of 18
CD RECEIVER KD-G162/KD-G161 For installation and connections, refer to the separate manual. INSTRUCTIONS GET0334-003A [EX/EU] For canceling the display demonstration, see page 5.
2 ENGLISH How to detach/attach the control panel Detaching... Attaching... Note: Only for [EX] model users in UK and European countries For security reasons, a numbered ID card is provided with this unit, and the same ID number is imprinted on the unit’s chassis.
ENGLISH 3 How to read this manual • Button operations are mainly explained with the illustrations in the table below. • is used to indicate an indicator is displayed for the correspnding operation. • Some related tips and notes are explained in “More about this unit” (see pages 14 and 15).
4 ENGLISH Control panel — KD-G612/KD-G611/KD-G511 i M MODE button o (control panel release) button Display window ; DISC indicator a RND (disc random) indicator s RPT (repeat) indicator d LOUD (loud.
ENGLISH 5 Basic settings • See also “General settings — PSM” on pages 11 and 12. 1 2 1 Canceling the display demonstrations Select “DEMO,” then “DEMO OFF.” 2 Setting the clock Select “CLOCK H” (hour), then adjust the hour. Select “CLOCK M” (minute), then adjust the minute.
6 ENGLISH When an FM stereo broadcast is hard to receive Lights up when monaural mode is activated. Reception improves, but stereo effect will be lost. To restore the stereo effect, repeat the same procedure. “MONO OFF” appears and the MO indicator goes off.
7 ENGLISH Manual presetting Ex.: Storing FM station of 92.5 MHz into preset number 4 of the FM1 band. 1 2 3 Preset number flashes for a while. Listening to a preset station 1 2 Select the preset station (1 – 6) you want.
8 ENGLISH Using the standby receptions TA Standby Reception TA Standby Reception allows the unit to switch temporarily to Traffic Announcement (TA) from any source other than AM. The volume changes to the preset TA volume level if the current level is lower than the preset level (see page 12).
9 ENGLISH To locate a particular track To select a number from 01 – 06: To select a number from 07 – 12: Prohibiting disc ejection You can lock a disc in the loading slot. To cancel the prohibition, repeat the same procedure. Selecting the playback modes You can use only one of the following playback modes at a time.
10 ENGLISH Sound adjustments You can select a preset sound mode suitable to the music genre (C-EQ: custom equalizer). 1 2 Indication (For) BAS TRE LOUD (bass) (treble) (loudness) USER (Flat sound) 00 .
11 ENGLISH Indications Selectable settings, [reference page] DEMO Display demonstration DE MO O N : [Initial]; Display demonstration will be activated automatically if no operation is done for about 20 seconds, [5].
12 ENGLISH Indications Selectable settings, [reference page] PTY-STBY PTY standby Activates PTY Standby Reception with one of the PTY codes, [8]. OFF [Initial] = PTY codes, [15] = (back to the beginni.
ENGLISH 13 Maintenance How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
14 ENGLISH • When Alternative Frequency Reception is activated (with AF selected), Network- Tracking Reception is also activated automatically. On the other hand, Network- Tracking Reception cannot be deactivated without deactivating Alternative Frequency Reception.
ENGLISH 15 General settings—PSM • If you change the “AMP GAIN” setting from “HIGH PWR” to “LOW PWR” while the volume level is set higher than “VOL 30,” the unit automatically changes the volume level to “VOL 30.
16 ENGLISH Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level. • Check the cords and connections. • The unit does not work at all. Reset the unit (see page 2). FM/AM • SSM automatic presetting does not work.
ENGLISH 17 Specifications AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 45 W per channel Rear: 45 W per channel Continuous Power Output (RMS): Front: 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion.
EN, FR 1005DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit © 2005 Victor Company of Japan, Limited Rear_KD-G162_161[EX_EU]f.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC KD-G162 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC KD-G162 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC KD-G162 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC KD-G162 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC KD-G162, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC KD-G162.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC KD-G162. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC KD-G162 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
