Manuale d’uso / di manutenzione del prodotto GV-PT2 del fabbricante JVC
Vai alla pagina of 74
For Customer Use: Enter below the Serial No. of the GV -PT2U Multimedia Printer . The serial number is located on the bottom of the GV -PT2U. Model No.
2 Dear Customer , Thank you for purchasing this Multimedia Printer . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product.
3 5. V entilation Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
4 USE 1. Accessories T o avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
5 CAUTIONS If you notice smoke or a peculiar smell coming from the printer , shut it down and unplug it IMMEDIATEL Y . Use of the printer under these conditions could lead to fire or electric shock. Contact your JVC dealer. DO NOT attempt to repair the malfunction yourself.
6 MAJOR FEA TURES A V ariety of Special Effects Printing Options This printer allows you to print text or images on standard or seal paper in any of one of several formats. STROBE PRINT (page 30) Print at set intervals, as when taking snapshots in rapid succession.
7 SUN 1 8 15 22 29 MON 2 9 16 23 30 TUE 3 10 17 24 WED 4 11 18 25 THU 5 12 19 26 FRI 6 13 20 27 SAT 7 14 2.
8 MAJOR FEA TURES 6 CONTROLS, INDICA TORS AND CONNECTORS 10 Front View .................................................................................... 10 Rear View ..................................................................................
9 PERIPHERAL UNIT CONNECTIONS 54 INST ALLING THE SOFTW ARE 56 OPEN & CLOSE (Basic Operation Procedure) 58 CONTROLS AND OPERA TIONS 60 PRINTING PROCEDURE 63 Video Printer Operation ...................................................................
10 CONTROLS, INDICA TORS AND CONNECTORS Front V iew 1 PRINT button 2 MEMOR Y button • Press to store an input image for printing. 3 POWER button • T urns the printer on and off. 4 SOURCE/ON LINE button 5 FRAME ST ABILIZER 6 V ent holes • Periodically clean these holes with a vacuum cleaner .
11 Rear V iew & P ARALLEL Connector • Connect to the parallel (printer) terminal of a computer using a commercially available printer cable. * Service Door for Jammed Paper Removal • Open this door when paper is jammed. * Do not open this door unless paper is jammed.
12 CONTROLS, INDICA TORS AND CONNECTORS (cont.) Remote Control Unit POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 1 8 9 0 ! @ # $ 2 3 4 5 6 7 8 POWER button 9 .
13 PREP ARA TION OF THE REMOTE CONTROL (RC) UNIT How to aim the remote control unit How to install the batteries Place two R03/AAA batteries in the compartment. Align the batteries as shown. Operating distance depends on the ambient brightness and the angle at which the RC unit is aimed at the receiver.
14 REMOTE PAUSE S INPUT VIDEO VIDEO OUTPUT CONNECTIONS Make sure that you have easy access to the AC outlet which the printer is plugged into so that it can be immediately unplugged in case of emergency . Connect the printer power plug to a different AC outlet from the TV and VCR.
15 REMOTE PAUSE S INPUT VIDEO VIDEO OUTPUT TO CONNECT TO AN IMAGE SOURCE WITH REGULAR VIDEO OUTPUT CONNECTORS V ideo cable (optional) Connect to V ideo input connector ø 3.
16 A Install the ink cassette included with the optionally available color print paper sheet set. 1 OPEN CASSETTE DOOR Pull the right top of the door in the direction indicated by the arrow to open it. 2 T AKE UP SLACK T urn the roller on the side with the “ ” mark in the direction of the arrow .
17 About Color Print Paper Sheet Sets (optional) Y ou must use one of the sets shown in the following chart: SET PV -50SF AU (Standard type) PV -25SFSAU (Sticker type) CONTENTS • Standard Print Pape.
18 Opening the paper tray ● Open the lid while pushing A . LOADING THE P APER TRA Y A T o printer Printing side Cautions Inserting color print paper sheets in the paper tray 1. Keep the partition panel upright. If it is tilted, get it upright by pushing the back of the paper tray .
19 PREP ARA TION ● Before printing, make sure everything is set up and ready. 1 Have a Color Print Paper Sheet Set (option) ready. (page 17) 2 Install the ink cassette in the printer (page 16) 4 Open the output tray. 5 Connect image source to the printer (page 14).
20 This section explains how to print a single image — for example, if you want to print individual photographs to put in a photo album. BASIC PRINTING POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 1 3 5 6 2 1 PRESS FORMA T •FORMA T SELECT MENU appears on the connected monitor .
21 4 BEGIN SOURCE PLA YBACK Fast-forward or rewind the source tape to find the desired scene, then start playback a little before the scene. 5 PRESS MEMOR Y WHEN THE DE- SIRED IMAGE APPEARS •The image is stored in memory and appears on the screen. •If MEMORY display is unstable, press F .
22 DIFFERENT TYPES OF PRINTING Print menu display PRINTER MENU Z NUMBER OF PRINTS : 1 ON SCREEN : ON I D NUMBER : 20 SELECT [ / ] SET [ / ] OK [ OK ] QUIT [ MENU ] 4.
25 4 BEGIN SOURCE PLA YBACK Fast-forward or rewind the source tape to find the desired scene, then start playback a little before the scene. 5 PRESS MEMOR Y WHEN THE DE- SIRED IMAGE APPEARS •The image is stored in memory and appears on the screen. •Only one image is stored in memory , regardless of the MUL TI setting.
26 6 1 3 5 8 2 POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL Multi-Print (Different Scenes) Y ou can print various images on the same print sheet. DIFFERENT TYPES OF PRINTING (cont.) Preparation See page 19. 1 PRESS FORMA T •FORMA T SELECT MENU appears on the monitor .
25 4 BEGIN SOURCE PLA YBACK Fast-forward or rewind the source tape to find the desired scene, then start playback a little before the scene. 5 PRESS MEMOR Y WHEN THE DE- SIRED IMAGE APPEARS •The image is stored in memory and appears on the screen. •Only one image is stored in memory , regardless of the MUL TI setting.
26 6 1 3 5 8 2 POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL Multi-Print (Different Scenes) Y ou can print various images on the same print sheet. DIFFERENT TYPES OF PRINTING (cont.) Preparation See page 19. 1 PRESS FORMA T •FORMA T SELECT MENU appears on the monitor .
27 4 BEGIN SOURCE PLA YBACK Fast-forward or rewind the source tape to find the desired scene, then start playback a little before the scene. 5 PRESS MEMOR Y WHEN THE DE- SIRED IMAGE APPEARS •The image is stored in memory and appears in the upper lefthand corner of the screen.
28 POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 9 1,5 3,7 4,10 11 2,6,8 Inset Print DIFFERENT TYPES OF PRINTING (cont.) Preparation See page 19. Store the main scene 1 PRESS FORMA T •FORMA T SELECT MENU appears on the monitor .
29 Store the sub scene 5 PRESS FORMA T •FORMA T SELECT MENU appears on the monitor . 6 SELECT 4 OR 16 ON MUL TI AND SELECT SELECTED PIX ON CONTENT Press cursor buttons / to place the pointer Z on items and press cursor buttons / to change the options.
30 POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 1 3 5 6 2 Strobe Print The printer stores a selected number of images at short intervals, and print them on one sheet. DIFFERENT TYPES OF PRINTING (cont.) Preparation See page 19.
31 4 BEGIN SOURCE PLA YBACK Fast-forward or rewind the source tape to find the desired scene, then start playback a little before the scene. 5 PRESS MEMOR Y WHEN THE DE- SIRED IMAGE APPEARS •The images are automatically stored at intervals of approx.
32 V ertical Layout Print An image can be printed on the upper half of a print sheet. DIFFERENT TYPES OF PRINTING (cont.) POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 1 3 5 6 2 Preparation See page 19. 1 PRESS FORMA T •FORMA T SELECT MENU appears on the monitor .
33 4 BEGIN SOURCE PLA YBACK Fast-forward or rewind the source tape to find the desired scene, then start playback a little before the scene. 5 PRESS MEMOR Y WHEN THE DE- SIRED IMAGE APPEARS •The desired image is stored in memory and a vertical layout of the image appears on screen.
34 POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 1 3 5 6 2 Video Cassette Label Print Y ou can print video cassette labels that you can use to record the contents of your video cassettes. Use the optional Color Print Paper Sheet Set PV -25SFSAU.
35 4 BEGIN SOURCE PLA YBACK Fast-forward or rewind the source tape to find the desired scene, then start playback a little before the scene. 5 PRESS MEMOR Y WHEN THE DE- SIRED IMAGE APPEARS •The desired scene is stored in memory and appears on screen.
36 Name Sticker Print Y ou can print 16 separate copies of the same image. Use the optional Color Print Paper Sheet Set PV -25SFSAU. DIFFERENT TYPES OF PRINTING (cont.) POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 1 3 5 6 2 Preparation See page 19.
37 4 BEGIN SOURCE PLA YBACK Fast-forward or rewind the source tape to find the desired scene, then start playback a little before the scene. 5 PRESS MEMOR Y WHEN THE DE- SIRED IMAGE APPEARS •The desired image is stored in memory and appears on screen.
38 Preparation See page 19. POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 3 5,7 2 8 4,6 Calendar Print Y ou can print an image and calendar together . A vailable only with the vertical layout. DIFFERENT TYPES OF PRINTING (cont.
39 5 PRESS OK •MAKE/ERASE CALENDAR display appears with the image of vertical layout. 6 SET YEAR/MONTH OF CALENDAR Press cursor buttons / , place the pointer Z on year or month and change year or month with cursor buttons / . 7 PRESS OK BUTTON •Screen turns blue with “Please wait.
40 Stored Title Impose Five different titles including “HAPPY BIR THDA Y” are stored in the printer and can be called up for superimposed printing.
41 4 PRESS OK •Screen turns blue with “Please wait.” displayed. The title superimposed on the image then appears on MEMORY display . •If masking is desired at the same time, follow the steps 2 through 4 on page 44. •When both the masking and title are super - imposed on the image, the title appears on the frame.
42 Camera Title Impose Y ou can print a scene or image with your own handwritten characters or drawing imposed on it. The title or drawing will cover the entire image area of the color print paper sheet, regardless of the “MUL TI” setting. DIFFERENT TYPES OF PRINTING (cont.
43 4 SELECT CAMERA TITLE Press cursor buttons / to place the pointer Z on CAMERA TITLE. 5 PRESS OK •SELECT/ERASE TITLE disappears with title entry display entered. •T itle automatically turns blue. •If a vertical layout or video cassette label format is selected, ensure that the title is inside the image area.
44 Masking Print Y ou can print an image inside a frame by masking part of the image. Four different frame shapes are available. DIFFERENT TYPES OF PRINTING (cont.) Star Oval Heart W ave POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 2 3 4 5 CANCEL button Preparation See page 19.
45 4 PRESS OK •Screen turns blue with “Please wait.” displayed. The masking superimposed on the image then appears on MEMORY display . •If you want to title-superimpose at the same time, follow the steps 2 through 4 on page 40. •When both the masking and title are super - imposed on the image, the title appears on the frame.
46 Snapshot Print If you have a JVC camcorder with a Snapshot Search function (such as the GR-SV7 and GR- DV1), you can easily locate and print snapshots.
47 4 REWIND THE T APE IN THE CAMCORDER TO THE SCENE YOU W ANT TO PRINT , THEN P AUSE THE T APE 5 PRESS MODE •MODE SELECT MENU appears. •If the image to be printed is not stored in memory , “CAPTURE” is not displayed on the MODE SELECT MENU. 6 SELECT SNAP SHOT PRINTING Press cursor buttons / and place the pointer Z on SNAP SHOT PRINTING.
48 Editing Index When you edit a source tape using Random Assemble Editing (available on selected JVC camcorders and VCRs), you can print out the scenes at the Edit-In and Edit-Out points you’ve registered. This allows you to make an editing index. DIFFERENT TYPES OF PRINTING (cont.
49 4 CHOOSE EDITING INDEX Press cursor buttons / and place the pointer Z on EDITING INDEX. 5 PRESS OK •MODE SELECT MENU disappears and EDITING INDEX appears. •16 image sections are displayed regardless of the number of scenes set on the PRINTER MENU.
50 MEMO.
51 PERSONAL COMPUTER PRINTER SECTION q The Readme.TXT file provides additional information for setup and information that is not included in the instruction manual.
52 REQUIRED HARDW ARE q Bi-Directional 25-pin printer interface q 486DX2 or higher CPU OPERA TING ENVIRONMENT q Personal computer with Microsoft T * Windows T * Operating System V ersion 3.
53 SOFTW ARE FEA TURES DRIVER WINDOW Print orientation, number of prints and image adjustment can be selected in this window . •Print orientation : Portrait/Landscape •No.
54 PERIPHERAL UNIT CONNECTIONS q When connecting components, make sure all units are turned off. T o VIDEO INPUT TV (Set the input select switch to VIDEO (EXT .IN)) V ideo cable (optional) An S-V ideo cable connection is recommended for optimal image quality .
55 REMOTE PAUSE S INPUT VIDEO VIDEO OUTPUT Rear panel jack T o VIDEO OUTPUT connector To P ARALLEL connector Commercially available printer cable (bi- directional parallel interface) P.
56 INST ALLING THE SOFTW ARE INST ALLING IN A WINDOWS-COMP A TIBLE PC Refer to the Windows T user manual for details on basic W indows T operation. INST ALLA TION 1 . Start W indows T . • Close any other programs that are open. 2 . Insert the “Driver & Capture Utility Software (INST ALL DISK)” into the floppy disk drive.
57 Run Type the name of a program, folder, or document, and Windows will open it for you. Open: a:setup OK Cancel Browse… Software License Agreement Contract Please read the following contract. IMPORTANT NOTICE Thank you for purchasing this product.
58 OPEN & CLOSE (Basic Operation Procedure) GETTING ST ARTED Y ou can launch this program using the standard procedure for W indows T . There are some differences between Windows T 3.1 and W indows T 95. Windows T 3.1 of fers a number of ways to launch an application.
59 Once the program has loaded, W indows T 3.1 displays the screen shown below . File(F) Edit(E) Image(I) Window(W) Help(H) Maximize button Titlebar Control menu button CLOSING THE PROGRAM Double-click the control menu button in Windows T 3.1 or click Close GV -PT2 Capture Utility (X) on the [File (F)] menu.
60 CONTROLS AND OPERA TIONS MENUBAR Capture New(N) Save(S) Save As(A) Exit Capture Utility(X) Capture New(N) Save(S) Save As(A) Exit Capture Utility(X) File(F) Edit(E) Image(I) Windo.
61 Undo(Z) Copy(C) Rotate 90 ° Clockwise(9) Rotate 90 ° Counterclockwise(0) Resize(S) Change Color Mode(C) Edit(E) 256-Tone Index Color Gray Scale 800% 400% 200% 100%.
62 CONTROLS AND OPERA TIONS (cont.) Window(W) Tile(T) Cascade(C) Arrange Icons 1 Capture1 2 Capture2 3 Capture3 4 Capture4 Arranges the captured images side by side and stacked one upon another. A maximum of four tiles are visible at one time.
63 POWER TITLE MASKING SOURCE FRAME STABILIZER MEMORY PRINT MODE FORMAT MENU OK CANCEL 1,9 4 3 PRINTING PROCEDURE PRINTING AN IMAGE FROM YOUR PC Y ou can work on images captured on your PC using commercially available Paint software programs — for instance, to add text or modify the image — and then print the results.
64 Print Printer Name: Properties PC OPERA TION 5 . Capture the image. • Select [Capture New (N)] in the File menu to transfer the image data from printer to PC. • The captured image is framed in white. 6 . Repeat steps 2 through 5 to capture other images.
65 11 . Call up the printer setup display (setup dialog). (Example) •W indows T 95 Click [Properties (P)] on the display on page 64, and the [Setup Dialog] box appears. •W indows T 3.1 Click [Option (O)] on the printer setup display , and the [Setup Dialog] box appears.
66 HOW THE SETUP DIALOG WORKS 4 . [OK] Click to validate the change you have made. 5 . [Cancel] Click to cancel the change you have made and close this window . 6 . [Normal (N)] Click to set contrast and brightness to normal. 7 . [Help (H)] Click to call up help information.
67 HOW THE SPOOLER WINDOW WORKS GV-PT2 Spooler Information(I) Help(H) 2 1 3 5 4 6 7 8 9 Transmitting now. 5 . Spooler bar box Displays progress of the data transfer from PC to printer . Print starts when the bar is fully down. 6 . Help button Click to call up help information for the spooler window .
68 WHA T TO DO IF ANY OF THE MESSAGES BELOW APPEAR VIDEO PRINTER MODE TROUBLESHOOTING v Appears when: m Action: Message Please wait. Set ink cassette and close cover . Set paper tray . Open output tray . Paper is not compat- ible with ink cassette. Open back door and remove paper .
69 WHA T TO DO IF ANY OF THE MESSAGES BELOW APPEAR VIDEO PRINTER MODE v Appears when: m Action: Message Paper jammed. Remove paper . Close back door . PC mode is selected. Video printer mode is selected. W aiting for transfer of captured data. T ransferring cap- tured data!! v Paper is jammed during printing.
70 v Printer power is not on, printer is improperly connected, or BIOS setting is not correct. m T urn the printer power on after checking to make sure connections are correct. v The jammed paper removing door is not fully closed. m Close the jammed paper removing door .
71 WHA T TO DO IF ANY OF THE MESSAGES BELOW APPEAR PC PRINTER MODE v Appears when: m Action: Message Page Video printer mode is selected. Switch to the PC mode. Capture mode is selected. Switch to the PC mode. Ink cassette is empty . Replace ink cassette.
72 TROUBLESHOOTING (cont.) Check to see if If power won’t turn on Error lamp lights (or blinks) paper is jammed two or more stacked sheets have printed the image you want to print from the playback unit cannot be called up on screen. the image on the TV screen won’t change or the stored image has disappeared.
73 WHEN PAPER JAMS 1 . Unplug the power cord. •The stored image disappears. 2 . Remove the jammed sheet from the output tray . If no paper is jammed in the output tray 3 . Remove the paper tray and remove the jammed sheet. If no paper is jammed in the slot of the paper tray 4 .
74 SPECIFICA TIONS AC 120 V ` , 60 Hz During printing : Approx. 63 W , 1.0 A When idle : Approx. 4 W NTSC standard Sublimation dye thermal transfer line printing Resolution : 640 (horiz.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC GV-PT2 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC GV-PT2 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC GV-PT2 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC GV-PT2 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC GV-PT2, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC GV-PT2.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC GV-PT2. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC GV-PT2 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
