Manuale d’uso / di manutenzione del prodotto GR-D70 del fabbricante JVC
Vai alla pagina of 56
Please visit our Homepage on the World Wide Web f or Digital Video Camera: http://www .jvc-victor .co.jp/english/cyber/ For Accessories: http://www .jvc-victor .co.jp/english/accessory/ For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of the camcorder .
EN 2 CONTENTS None ADV ANCED FEA TURES ............................... 20 – 22 Protecting Files .................................................. 20 Deleting Files ..................................................... 20 Dubbing Still Images Recorded On A T ape T o A Memory Card .
EN 3 NOTES: ● The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit. ● The rating information and safety caution of the AC Adapter are on its upper and lower sides. W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APP ARA TUS TO RAIN OR MOISTURE.
EN 4 (10) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer , or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over . (11) Unplug this apparatus during lightning storms or when unused for long periods of time.
EN 5 2 3 4 1 1 NOTE: In order to maintain optimum performance of the camcorder , provided cables may be equipped with one or more core filter . If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder .
EN 6 Automatic Demonstration takes place when “ DEMO MODE ” is set to “ ON ” (factory-preset). 䡲 Automatic Demonstration starts when there is no operation for about 3 minutes after the Power Switch y is set to “ ” or “ ” and no cassette is in the camcorder .
EN 7 y r # Q Battery pack BN-V408U BN-V416U (optional) BN-V428U (optional) Charging time approx. 1 hr . 30 min. approx. 3 hrs. approx. 5 hrs. Power CHARGING THE BA TTER Y P ACK 1 With the arrow on the.
EN 8 Grip Adjustment 1 Separate the V elcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust your thumb and fingers through the grip, to easily operate the Recording Start/Stop button w and Power Switch y and Power Zoom Lever & .
EN 9 W Shoulder Strap Attachment 1 Thread the strap through the eyelet e , then fold it back and thread it through the buckle. Repeat the procedure to attach the other end of the strap to the other eyelet e located under the Grip Strap. Confirm the strap is not twisted.
EN 10 ● It takes a few seconds for the cassette holder to open. Do not apply force. ● There may be a delay after you open the cassette holder cover until the cassette holder opens. Do not use force. ● If you wait a few seconds and the cassette holder does not open, close the cassette holder cover and try again.
EN 11 – RE TURN – – DSC TY QUA L I REC SE L ECT FI N E 02 1X 7 48 6 IM A G E S I Z E y r % t Loading A Memory Card (GR-D90/D70 only) The provided memory card (GR-D90 only) is already inserted in the camcorder when you receive the camcorder . 1 Make sure the camcorder ’ s power is off.
EN 12 OFF ( CHARGE ) PLA Y w % t y r 4 180 ° 90 ° u 2 0 5 m h 1h30m 1h29m 0h 0 3m 1 h 30 m 0h 0 2m (Blinking) 0h 0 1m (Blinking) 0h 0 0m (Blinking) ( ) Now calculating During shooting Basic Recording Perform the procedures listed below before continuing.
EN 13 T APE RECORDING Power Switch Position : Allows you to set various recording functions using the Menus. If you want more creative capabilities than Full Auto recording, try this mode. (Full Auto): Allows you to record using NO special effects or manual adjustments.
EN 14 T APE RECORDING Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “ 00:00:00 ” (minute:second:frame).
EN 15 6 5 7 8 % & 4 y T APE PLA YBACK Blank Search Helps you find where you should start recording in the middle of a tape to avoid time code interruption ( 墌 pg.
EN 16 To S-VIDEO ) To AV ( Audio/Video cable (provided) White to AUDIO L IN ** Red to AUDIO R IN ** T o S-VIDEO IN S-Video cable (optional) Connector cover * Y ellow to VIDEO IN*** * When connecting the cable, open this cover . ** The Audio cable is not required for watching still images only .
EN 17 5 1 1024 ^ y t 4 MEMORY CARD RECORDING (GR-D90 and GR-D70 only) Basic Shooting (Snapshot) Y ou can use your camcorder as a digital still camera for taking snapshots. Perform the procedures listed below before continuing. ● Power ( 墌 pg. 7) ● Grip Adjustment ( 墌 pg.
EN 18 Normal Playback 1 Load a memory card ( 墌 pg. 1 1). 2 Set the VIDEO/DSC Switch 4 to “ DSC ” , then set the Power Switch y to “ PLA Y ” while pressing down the Lock Button t . • A stored image is displayed. 3 Press 3 8 to display the next image, or press 2 6 to display the previous image.
EN 19 MEMORY CARD PLA YBACK (GR-D90 and GR-D70 only) Viewing File Information Y ou can get the relevant file information by pressing the INFO button 0 during normal playback or Index playback. FOLDER : Folder name ( 墌 pg. 22) FILE : File name ( 墌 pg.
EN 20 ME NU DIS P L A Y END BR I GH T PR OTEC T D ELETE DPOF NO . RE S E T FO R M AT Protecting Files The Protect mode helps prevent the accidental erasure of files.
EN 21 Dubbing Still Images Recorded On A T ape T o A Memor y Card Still images can be dubbed from a tape to a memory card. 1 Load a memory card ( 墌 pg. 1 1) and cassette ( 墌 pg. 9). 2 Set the VIDEO/DSC Switch 4 to “ VIDEO ” , then set the Power Switch y to “ PLA Y ” while pressing down the Lock Button t .
EN 22 5 Select the number of prints by rotating the MENU/ VOLUME wheel % and press it. Repeat steps 3 through 5 for the desired number of prints. • The number of prints can be set up to 15. • T o correct the number of prints, select the image again and change the number .
EN 23 Night-Alive Makes dark subjects or areas even brighter than they would be under good natural lighting. Although the recorded image is not grainy , it may look as if it is strobing due to the slow shutter speed. 1 Set the Power Switch y to “ ” while pressing down the Lock Button t located on the switch.
EN 24 Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Fade or Wipe works when tape recording is started or when you stop recording.
EN 25 FOR RECORDING Snapshot (For T ape Recording) This feature lets you record still images that look like photographs onto a tape. SNAPSHOT MODE SELECTION 1 Set the VIDEO/DSC Switch 4 to “ VIDEO ” (GR-D90/ D70 only), then set the Power Switch y to “ ” while pressing down the Lock Button t located on the switch.
EN 26 FOR RECORDING Manual Focus T o obtain correct focus. 1 If you are using the viewfinder , you should already have made the necessary viewfinder adjustments ( 墌 pg. 8). 2 Set the Power Switch y to “ ” while pressing down the Lock Button t located on the switch, then press FOCUS * ( 墌 pgs.
EN 27 Iris Lock Use this function in the following situations: • When shooting a moving subject. • When the distance to the subject changes (so its size in the LCD monitor or the viewfinder changes), such as when the subject is backing away . • When shooting on a reflective natural background such as at the beach or when skiing.
EN 28 USING MENUS FOR DET AILED ADJUSTMENT For Recording Menu This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings ( 墌 pg. 28 – 31). 1 Set the Power Switch y to “ ” while pressing down the Lock Button t located on the switch.
EN 29 USING MENUS FOR DET AILED ADJUSTMENT GAIN UP OFF: Allows you to shoot dark scenes with no picture brightness adjustment. [AGC]: The overall appearance may be grainy , but the image is bright. AUTO : The shutter speed is automatically adjusted (1/30 — 1/200 sec.
EN 30 USING MENUS FOR DET AILED ADJUSTMENT BEEP OFF: Even though not heard while shooting, shutter sound is recorded on the tape. BEEP: The beep sounds when the power is turned on or off, and at the beginning and end of recording. Also to activate the shutter sound effect ( 墌 pg.
EN 31 USING MENUS FOR DET AILED ADJUSTMENT CLOCK ADJ. Allows you to set the current date and time ( 墌 pg. 10). DSC (GR-D90/D70 only) QUALITY , IMAGE SIZE Refer to “ Picture Quality/Image Size Setting ” ( 墌 pg.
EN 32 12 12 : 34 : 24 0 3 0 ’ 5 2 3 : 5 bi t /S O U M P C E D ND 1 4 6 L USING MENUS FOR DET AILED ADJUSTMENT ON SCREEN setting: For playback sound, tape speed and tape running. DA TE/TIME setting: For date/time. Display Minutes Seconds Frames * * 30 frames = 1 second TIME CODE setting: For time code.
EN 33 7 4 DUBBING Dubbing T o Or From A VCR T o Use This Camcorder As A Player 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg.
EN 34 DUBBING Dubbing T o Or From A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from this camcorder onto another video unit equipped with a DV connector . Since a digital signal is sent, there is little if any image or sound deterioration.
EN 35 USING THE REMOTE CONTROL UNIT (GR-D90 and GR-D70 only) Slow-Motion Playback T o allow slow-speed search in either direction during tape playback. 1 T o change from normal to Slow-Motion Playback, press SLOW ( 9 ) U or ( 0 ) g more than approx. 2 seconds.
EN 36 Audio Dubbing The audio track can be customized only when recorded in the 12-bit mode ( 墌 pg. 28). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16-bit audio, on a tape recorded in the LP mode or on a blank portion of a tape. ● T o perform Audio Dubbing while watching on the television, make connections ( 墌 pg.
EN 37 SYSTEM CONNECTIONS “ ACCESSING FILES ” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC. NEVER disconnect the USB cable while “ACCESSING FILES” is displayed on the LCD monitor since this can result in product damage.
EN 38 TROUBLESHOOTING The focus does not adjust automatically . • Focus is set to the Manual mode. ¥ Set Focus to the Auto mode ( 墌 pg. 26). • The recording was done in a dark place, or the contrast was low . • The lens is dirty or covered with condensation.
EN 39 TROUBLESHOOTING The Black & White Fader does not work. • The Sepia or Monotone mode is activated. ¥ T urn off Sepia and Monotone ( 墌 pg.
EN 40 The charger indicator on the camcorder does not light. • The temperature of the battery is extremely high/low . • Charging is difficult in places subject to extremely high/low temperatures. ¥ T o protect the battery , it is recommended to charge it in places with a temperature of 10 ° C to 35 ° C (50 ° F to 95 ° F) ( 墌 pg.
EN 41 CAUTIONS NOTES: ● It is normal for the battery pack to be warm after charging, or after use. T emperature Range Specifications Charging ................ 10 ° C to 35 ° C (50 ° F to 95 ° F) Operation ............... 0 ° C to 40 ° C (32 ° F to 104 ° F) Storage .
EN 42 CAUTIONS LCD Monitor 1. T o prevent damage to the LCD monitor , DO NOT . . . ... push it strongly or apply any shocks. ... place the camcorder with the LCD monitor on the bottom. 2. T o prolong service life . . . ... avoid rubbing it with coarse cloth.
EN 43 CAUTIONS For Y our Maintenance 1) After Use 1. Turn off the camcorder . 2. Slide and hold OPEN/EJECT W in the direction of the arrow , then pull the cassette holder cover open until it locks. The cassette holder opens automatically . Remove the cassette.
EN 44 For GR-D90US and GR-D70US Owners: Declaration of Conformity Model Number : GR-D90US/D70US T rade Name : JVC Responsible party : JVC AMERICAS CORP . Address : 1700 V alley Road W ayne, N. J. 07470 T elephone Number : 973-317 – 5000 This device complies with Part 15 of FCC Rules.
EN 45 SPECIFICA TIONS Camcorder General P ower supply : DC 11.0 V (Using A C Adapter) DC 7.2 V (Using battery pack) P ower consumption LCD monitor off, viewfinder on : Approx.
EN 46 INDEX Controls, Connectors And Indicators OFF ( CHARGE ) PLA Y 9 0 2 3 4 6 we 5 T W %^ () & * 2 3 1 4 9 567 8 w e r t p i $ y u Q # @ ! 0 q W o E R I T O U l h g Y P a f d k ; A s j Viewfinder Speaker LCD monitor Refer to this diagram while reading the instructions.
EN 47 INDEX 1 • Remote Sensor (GR-D90/D70 only) The transmitted beam’ s approximate eff ective distance for indoor use is 5m (16ft). The transmitted beam ma y not be effectiv e or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or pow erful lighting.
EN 48 INDEX LCD Monitor/Viewfinder Indications During T ape Recording Only During Memory Card Recording Only (GR-D90/D70 only) During Both T ape And Memory Card Recording During T ape Playbac k During.
EN 49 INDEX 1 Displays the selected F ade/Wipe effect .... 墌 pg. 24 2 Appears when in the Squeeze or Cinema mode .................................................................. 墌 pg. 29 3 Rotates while the tape is running .............. 墌 pg.
EN 50 INDEX W ARNING INDICA TIONS (high) (exhausted) Displays the battery remaining power le vel. As the battery power comes close to nil, the battery indicator blinks (battery power warning). When the battery power is e xhausted, power turns off automatically .
EN 51 CARD ERROR! Appears when the camcorder does not recognize the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted.
EN 52 F Fade-In/Out .................................................... 墌 pg. 24 Fast-Forward The T ape .................................. 墌 pg. 14 Frame-By-Frame Playback ...................... 墌 pg. 14, 35 G Gain Up ..........................
EN 53 P Picture Quality/Image Size ............................. 墌 pg. 1 1 Playback Special Effects ................................ 墌 pg. 35 Playback Zoom .............................................. 墌 pg. 35 Power-Linked Operation ..........
MEMO 1 GR-D90/70/30US EN 38-56 02.11.6, 3:16 PM 54.
MEMO 1 GR-D90/70/30US EN 38-56 02.11.6, 3:16 PM 55.
COPYRIGHT© 2002 VICTOR COMP ANY OF JAP AN, L TD . VICTOR COMP ANY OF JAPAN, LIMITED US Printed in Malaysia 1102-HO-UN-PJ 1 GR-D90/70/30US EN 38-56_M 02.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC GR-D70 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC GR-D70 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC GR-D70 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC GR-D70 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC GR-D70, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC GR-D70.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC GR-D70. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC GR-D70 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
