Manuale d’uso / di manutenzione del prodotto GR-AXM100 del fabbricante JVC
Vai alla pagina of 56
G R-A XM1 0 0 COMP ACT VHS CAMCORDER INSTRUCTIONS LYT0026-001C Com pa ct VHS For Customer Use: Enter below the Model No. and Serial No. which is located on the bottom of cabinet.
2 EN Dear Customer , Thank you for purchasing the JVC Compact VHS camcorder . Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new camcorder . Using This Instruction Manual • All major sections and subsections are listed in the T able Of Contents ( Z pg.
EN 3 5. V entilation Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. • Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.
4 EN USE 1. Accessories T o avoid personal injury: • Do not place this product on an unstable cart, stand, tripod, bracket or table. It may fall, causing serious injury to a child or adult, and serious damage to the product. • Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product.
EN 5 2 1 3 3 4 2 1 Using the battery pack 1 Hook-on the battery pack’ s top end to the camcorder . (Charging procedure, Z pg. 8) 2 Push in the battery pack until it locks into place. T o remove the battery pack Slide BA TT. RELEASE and pull out the battery pack.
6 EN MAJOR FEA TURES REMEMBER Program AE with Special Effects ( Z pg. 24) n Auto Mode Lock n Auto Mode Release n Electronic Fog Filter n ND Ef fect n Sepia n T wilight n Sports n 1/1000 sec. High Speed Shutter n 1/2000 sec. High Speed Shutter Cassettes marked can be used with this camcorder .
EN 7 CONTENTS GETTING ST ARTED 8 Power ..................................................................................... 8 Clock (Lithium) Battery Insertion/Removal ........................................ 10 Date/T ime Setting ...................
8 EN GETTING ST ARTED Power This camcorder’s 3-way power supply system lets you choose the most appropriate source of power . NOTES: ● No function is available without power supply . ● Use only specified power supply . ● Do not use provided power supply units with other equipment.
EN 9 CHARGE MARKER A charge marker is provided on the battery pack to help you remember whether it has been charged or not. T wo colors are provided (red and black)—you choose which one means char ged and which means dischar ged.
10 EN GETTING ST ARTED (cont.) Clock (Lithium) Battery Inser tion/Removal This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER 1 Switch off the unit’ s power and remove the power supply unit. OPEN COVER 2 Open the clock battery compartment cover while pressing the release tab.
EN 11 Date/T ime Setting ACCESS MENU SCREEN 1 First set the Power Switch to “CAMERA”. T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION 2 Rotate the MENU Jog Dial to move the highlight bar to “DA TE/TIME”, then press it.
12 EN GETTING ST ARTED (cont.) Recording Mode Setting Set depending on your preference. SET RECORDING MODE 1 First set the Power Switch to “CAMERA”.
EN 13 1 2 2 3 3 4 4 5 Loading/Unloading A Cassette OPEN LCD MONITOR 1 Open the LCD monitor to an angle of over 45 degrees. OPEN CASSETTE HOLDER 2 Press EJECT until the holder opens. Do not use force to open. INSER T/REMOVE CASSETTE 3 Make sure the label is facing outward.
14 EN GETTING ST ARTED (cont.) Grip Adjustment EXP AND LOOP 1 Separate the V elcro strip. INSER T HAND 2 Pass your right hand through the loop and grasp the grip. ADJUST STRAP LENGTH 3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Button.
EN 15 Shoulder Strap Attachment A TT ACH STRAP 1 Following the illustration at left, thread the strap through the top of the eyelet 1 , then fold it back and thread it through the buckle 2 . Repeat the procedure to attach the other end of the strap to the other eyelet 3 , making sure the strap isn’t twisted.
16 EN RECORDING Basic Recording NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power ( Z pg. 8) ● Recording Mode/T ape Length Setting ( Z pg. 12) ● Grip Adjustment ( Z pg. 14) LOAD A CASSETTE 1 First open the LCD monitor to an angle of over 45 degrees.
EN 17 STOP RECORDING 4 Press the Recording Start/Stop Button again to stop recording. • The camcorder re-enters the Record-Standby mode. NOTES: ● When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 45 degrees or more, the LCD monitor switches on and the viewfinder switches off automatically to save power .
18 EN RECORDING Basic Recording (cont.) Shooting while watching the LCD monitor Before the following steps, perform step 1 ( Z pg. 16). ENTER RECORD–ST ANDBY MODE 2 Make sure the LCD monitor is fully open. Slide the LENS COVER Open/Close Switch to open the lens cover , then set the Power Switch to CAMERA.
EN 19 Journalistic shooting In some situations different angles of shooting may be required for more dramatic results. OPEN LCD MONITOR 1 Make sure the LCD monitor is fully open. TIL T LCD MONITOR 2 T ilt the LCD monitor in the most convenient direction.
20 EN RECORDING Basic Features FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. OPERA TION: Zoom In Press the “T” of the Power Zoom Button. Zoom Out Press “W” of the Power Zoom Button.
EN 21 FEA TURE: Quick Review PURPOSE: T o check the end of the last record- ing. OPERA TION: 1) Press “ ” and release quickly during the Record–Standby mode. n T ape is rewound for about 2 seconds and played back automatically , then pauses in Record–Standby mode for the next shot.
22 EN RECORDING Basic Features (cont.) Auto Date Record mode Date display Time display Date/Time display Date-off mode (No display) PM10:50:00 Date display Time display Date/Time display DEC 25.98 DEC 25.98 PM10:50:00 Auto date record mode Auto date record executed DEC 25.
EN 23 FEA TURE: V ideo Light PURPOSE: T o brighten the scene when natural lighting is too dim. OPERA TION: 1) Set the LIGHT OFF/AUTO/ON Switch as required: ON : Always keeps the light on as long as the camcorder is turned on. AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the subject.
24 EN RECORDING Advanced Features 1 / 1 0 0 0 1 / 2 0 0 0 F G N D A U T O M O D E L O C K R E L E A S E SEPIA Program AE With Special Effects All you have to do to access any of the variety of shooting effects is to turn the Select Dial. SELECT MODE 1 T urn the Select Dial until the symbol of the function you want is aligned with the mark.
EN 25 Dial LCD monitor/ Mode symbol Viewfinder indication Auto Mode Lock LOCK AUTO LOCK Auto Mode Lock Locks the camcorder in Full Auto mode, preventing incorrect operation due to accidental button pressing during shooting. • In this mode the following controls are disabled; DA TE/TIME display select, and the Menu Jog Dial.
26 EN RECORDING Advanced Features (cont.) FADER 4 EFFECT Fade-in Fade-out Fader This feature allows smooth fade-in and fade-out to black blank screen. Fade-in works at recording start, and fade- out works at recording end or when you enter Record- Standby mode.
EN 27 4 S.L X MAX MAX NORM OFF LCD monitor or viewfinder Super LoLux(Gain Up) Bright, natural recordings can be taken even in areas with low or poor lighting. SELECT SUPER LOLUX MODE 1 Press SUPER LOLUX repeatedly to cycle through the modes as shown at left.
28 EN RECORDING Advanced Features (cont.) Using Menu For Detailed Adjustment This camcorder is equipped with an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings. ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial.
EN 29 Adjusts focus automatically. Allows you to adjust focus manually ( Z pg. 30, 31). Adjusts exposure automatically . Allows you to adjust exposure manually ( Z pg. 32). Allows you to set the current date and time ( Z pg. 1 1). Usually the distance to a subject where the lens is in focus depends on the zoom magnification.
30 EN RECORDING Advanced Features (cont.) Focusing Auto Focus The camcorder’s Full Range AF system offers continuous shooting ability from close-up to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use manual focusing): • When two subjects overlap in the same scene.
EN 31 MENU 4 MENU END FOCUS EXPOSURE DATE T IME TELE MACRO TAPE LENGTH M. W. B. ZOOM SPEED 4 NE X T AUTO AUTO DEC OFF T30 AUTO FAST 25. 98 AUTO MANU EX I T FOCUS Manual Focus NOTE: Y ou should already have made the necessary viewfinder adjustments ( Z pg.
32 EN RECORDING Advanced Features (cont.) Exposure Control This feature automatically adjusts the iris for the best available picture quality , but you can override and make the adjustment manually . ACCESS MENU SCREEN 1 T urn the Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial.
EN 33 Manual White Balance Adjustment (M.W .B.) The white balance is usually adjusted automatically . However , the more advanced camcorder operator would prefer to control this function manually and achieve a more professional color/tint reproduction.
34 EN RECORDING Advanced Features (cont.) Self-Timer Y ou can set the delay between pressing the Recording Start/Stop Button and the actual start of recording. If you secure the camcorder , you (or whomever is operating the camcorder) can enter the scene before recording starts.
EN 35 Animation Give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time. NOTE: Make sure the camcorder is in the Record-Standby mode and the recording mode is set to “SP” before performing the following steps.
36 EN M–0: 23 : 45 SP 4 PLA YBACK Basic Playback PLA Y/P AUSE STOP FF REW LCD Monitor in Retracted Position T ape running indicator 4 : Playback 3 : Fast-Forward/ Forward Search 2 : Rewind/Reverse S.
EN 37 AT PLA YBACK Features Adjust the brightness of the LCD monitor T o brighten the image, turn the BRIGHT Dial toward “ + ”. T o darken the image, turn the Dial toward “ – ”. Speaker volume control Y ou can adjust the speaker volume by turning the VOLUME Dial.
38 EN PLA YBACK Featur es (cont.) FEA TURE: Still Playback PURPOSE: T o pause during playback. OPERA TION: 1) Press PLAY/P AUSE during playback. 2) T o resume normal playback, press PLA Y/P AUSE again. NOTE: Noise bars appear and pictures may become monochrome during Still Playback.
EN 39 PLA YBACK Using The Cassette Adapter Cassette Adapter (VHS Playpak) Use this to play back a VHS-C video cassette recorded with this camcorder . It is fully compatible with any VHS video cassette recorder . The C-P7U adapter is battery powered and automatically performs tape loading and unloading.
40 EN There are three basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. Connection T o A VCR A (Editing, Dubbing and Playback) NOTE: Use the optional Audio and V ideo cables.
EN 41 T APE DUBBING T ape Dubbing CONNECT EQUIPMENT 1 Following the illustration at left, connect the camcorder and the VCR. PREP ARE FOR DUBBING 2 Set the camcorder ’ s Power Switch to “PLAY”, turn on the VCR’ s power , and insert the appropriate cassettes in the camcorder and the VCR.
42 EN USER MAINTENANCE After Use 1 Set the Power Switch to “POWER OFF” to turn off the camcorder . 2 Press EJECT to open the cassette holder , then remove the cassette. 3 Close and lock the cassette holder by pressing PUSH . 4 Close and lock the LCD monitor .
EN 43 TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE(S) POWER RECORDING PLA YBACK T APE TRANSPORT No power is supplied. The power suddenly goes off and doesn’ t come back on by itself. Recording cannot be performed. Recording does not start. The tape is running, but there’ s no playback picture.
44 EN SYMPTOM POSSIBLE CAUSE(S) OTHER The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from functioning properly . In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Char ger , etc.
EN 45 REC SP 30MIN 444 4 S.L X T 3 0 01 MWB NORM 5MIN 1 4S LENS COVER PAUSE DEC 2 5 . 9 8 AM 1 1 : 4 5 : 1 8 MERRY CHRISTMAS TAPE END 1 * 6 * 7 2 3 4 5 % * ^ & 9 $ 0 # ( * ) 8 ! @ T WILIGHT INDEX LCD monitor/Viewfinder Indications # Instant T itle Display .
46 EN INDEX (cont.) 3 2 o W E p U I Q 1 % ( ) q # $ @ ! w ^ R e r t y & Y * i u T O 0 8 9 7 4 5 6.
EN 47 Controls 1 Power Zoom Button ........................... Z pg. 20 2 Multi-Function Control • EFFECT Button ................................. Z pg. 26 • WIDE Button ................................... Z pg. 26 • TITLE Button ...............
48 EN INDEX T erms A AC Power Adapter .................................. pg. 8 Animation Recording .............................. pg. 35 Auto Date Record ................................... pg. 22 Auto Focus ...........................................
EN 49 General Battery Pr ecautions • When the C-P6U or C-P7U (cassette adapter) is not functioning even when correctly operated, the battery is exhausted. Replace it with a fresh one. • Use only the following battery: C-P6U or C-P7U ..............
50 EN Cassettes T o properly use and store your cassettes, be sure to read the following cautions: 1. During use . . . ..... make sure the cassette bears the VHS-C mark. ..... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals.
EN 51 SPECIFICA TIONS GENERAL Format : VHS NTSC standard Power sour ce : DC 6V Power consumption LCD monitor off, viewfinder on : 5.9 W LCD monitor on, viewfinder off : 6.
52 EN ESP AÑOL A TENCION: Antes de desmontar la fuente de alimenta- ción, asegúrese que la alimentación de la cámara de video esté desconectada. El no hacerlo puede producir una falla de funcionamiento en la cámara de video.
EN 53 3 4 2 1 2 1 3 1 Abra el monitor LCD a un ángulo mayor de 45 grados. 2 Presione EJECT para abrir el portacassette. 3 Inserte cassette de video. 4 Presione PUSH para cerrar el portacassette.
54 EN FOR SERVICING (Only in U.S.A.) HOW TO LOCATE YOUR JVC SERVICE CENTER Dear customer: In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit.
EN 55 W ARRANTY (Only in U.S.A.) LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
G R-AXM1 0 0 COPYRIGHT© 1997 VICTOR COMPANY OF JAPAN, LTD. U/U-C Printed in Japan 1197MKV * UN * YP JV C COMP ANY OF AMERIC A DIVISION OF US JVC CORP .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC GR-AXM100 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC GR-AXM100 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC GR-AXM100 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC GR-AXM100 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC GR-AXM100, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC GR-AXM100.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC GR-AXM100. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC GR-AXM100 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
