Manuale d’uso / di manutenzione del prodotto GET0576-001A del fabbricante JVC
Vai alla pagina of 146
ENGLISH ESPAÑOL FRANÇAIS CD RECEIVER RECEPTOR CON CD RÉCEPTEUR CD For canceling the display demonstration, see page 7. Para cancelar la demostración en pantalla, consulte la página 7. Pour annuler la démonstration des affichages, référez-vous à la page 7.
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit.
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc, see page 9. • Be careful not to drop the disc when it ejects.
ENGLISH 4 Basic operations Using the control panel 9 Select the sound mode. p Detach the panel. q Change the display information. w • FM/AM : Search for station.
ENGLISH 5 OPERATIONS Display window 1 Tr (track) indicator 2 Source display / Track number / Folder number / Time countdown indicator 3 DISC indicator 4 Sound mode indicators—CLASSIC, HIP HOP, JAZZ,.
ENGLISH 6 Installing the lithium coin battery (CR2025) For USA-California Only: This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material—special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate Caution: • Danger of explosion if battery is incorrectly replaced.
ENGLISH 7 OPERATIONS Preparation Canceling the display demonstration and setting the clock • See also page 14. 1 Turn on the power. 2 [Turn] = [Press] Cancel the display demonstrations Select “ DEMO ,” then “ DEMO OFF .” Set the clock Select “ CLOCK ” = “ CLOCK SET .
ENGLISH 8 Listening to the radio 1 Select “FM” or “AM.” 2 Search for a station to listen—Auto Search. When a station is tuned in, searching stops. To stop searching, press the same button again. • You can also search for a station manually—Manual Search.
ENGLISH 9 OPERATIONS Continued on the next page 3 Selecting preset station or [Turn] = [Press] Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 2 Select preset number “04.
ENGLISH 10 OPERATIONS Pressing (or holding) the following buttons allows you to... [Press] Pause/resume playback. MP3/WMA: Select folder [Press] Select track [Hold] Reverse/fast-forward track Selecting the playback modes You can use only one of the following playback modes at a time.
ENGLISH 11 OPERATIONS & EXTERNAL DEVICES To stop play and detach the USB device Straightly pull it out from the unit. • Press SRC to listen to another playback source. You can operate the USB device in the same way you operate the files on a disc.
ENGLISH 12 Selecting a preset sound mode You can select a preset sound mode suitable to the music genre. • See also page 14. Preset value setting for each sound mode Sound mode Preset value BASS MIDDLE TREBLE LOUD (loudness) Freq. Level Q Freq. Level Q Freq.
ENGLISH 13 SETTINGS 3 Select a tone. 4 Adjust the sound elements of the selected tone. 1 Adjust the frequency. 2 Adjust the level. 3 Adjust the Q-slope. Sound elements Range/selectable items BASS MIDDLE TREBLE Frequency 60 Hz 80 Hz 100 Hz 200 Hz 0.5 kHz 1.
ENGLISH 14 Initial: Underlined Menu operations Category Menu items Selectable settings, [reference page] DEMO DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7].
ENGLISH 15 SETTINGS Category Menu items Selectable settings, [reference page] TUNER AREA Tuner channel interval • AREA US • AREA EU • AREA SA : When using in North/Central/South America. AM/FM intervals are set to 10 kHz/200 kHz. : When using in any other areas.
ENGLISH 16 Category Menu items Selectable settings, [reference page] AUDIO VOL ADJUST Volume adjust VOL ADJ –05 — VOL ADJ +05 (Initial: VOL ADJ 00) : Preset the volume adjustment level of each source (except FM), compared to the FM volume level. The volume level will automatically increase or decrease when you change the source.
ENGLISH 17 SETTINGS Creating your own color —USER Color You can create your own colors—“ DAY COLOR ” or “ NIGHT COLOR .” DAY COLOR : Used when “ DIMMER ” is set to “ DIMMER OFF .” NIGHT COLOR : Used when “ DIMMER ” is set to “ DIMMER ON .
ENGLISH 18 Basic operations Turning on the power • By pressing SRC button on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.
ENGLISH 19 REFERENCES • This unit can recognize a total of 512 files, 255 folders, and 8 hierarchical levels. • This unit can play back files recorded in VBR (variable bit rate). Files recorded in VBR have a discrepancy in the elapsed time display, and do not show the actual elapsed time.
ENGLISH 20 • This unit can play back MP3/WMA files meeting the conditions below: – Bit rate of MP3: 32 kbps — 320 kbps – Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2) – Bit rate of WMA: 32 kbps — 320 kbps – Sampling frequency of WMA: 22.
ENGLISH 21 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 22 Symptoms Remedies/Causes MP3/WMA playback • A longer readout time is required (“READING” keeps flashing on the display). Do not use too many hierarchical levels and folders. • Tracks do not play back in the order you have intended them to play.
ENGLISH 23 REFERENCES How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 24 AUDIO AMPLIFIER SECTION Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal-to-Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz) Q1.
ENGLISH 25 REFERENCES CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: .
Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR 1008DTSMDTJEIN © 2008 Victor Company of Japan, Limited Rear_KD-R400[J]_f.
1 KD-R400 Installation/Connection Manual Manual de instalación/conexión Manuel d’installation/raccordement GET0576-002A [J] J Handles Manijas Poignées F Washer (ø5) Arandela (ø5) Rondelle (ø5) G Lock nut (M5) Tuerca de seguridad (M5) Ecrou d’arrêt (M5) H Mounting bolt—M4 × 5 mm (M4 × 1/4"); M5 × 12.
2 When using the optional stay / Cuando emplea un soporte opcional / Lors de l’utilisation du hauban en option Bracket * 2 Ménsula * 2 Support * 2 Pocket Compartimiento Poche Flat head screws—M5 .
3 ENGLISH ESPAÑOL FRANÇAIS A Typical connections / Conexiones tipicas / Raccordements typiques Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit. The leads of the power cord and those of the connector from the car body may be different in color.
4 Set “L/O MODE” to “REAR” (See page 16 of the INSTRUCTIONS.) Ajuste “L/O MODE” a “REAR” (Consulte la página 16 del MANUAL DE INSTRUCCIONES.
ENGLISH DEUTSCH РУCCKИЙ ΕΛΛΗΝΙΚΑ CD RECEIVER CD-RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ ∆ΕΚΤΗΣ ΜΕ CD KD-R501/KD-R402/KD-R401 For installation and connections, refer to the separate manual.
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc, see page 10. • Be careful not to drop the disc when it ejects.
ENGLISH 4 Basic operations p Detach the panel. q Change the display information. w • FM/AM : Search for station. • CD/USB : Select track. e Return to the previous menu. r Remote sensor • You can control this unit with an optionally purchased remote controller.
ENGLISH 5 OPERATIONS Display window 1 Tr (track) indicator 2 Source display / Track number / Folder number / Time countdown indicator 3 DISC indicator 4 Sound mode indicators—CLASSIC, HIP HOP, JAZZ,.
ENGLISH 6 Preparation Canceling the display demonstration and setting the clock • See also page 16. 1 Turn on the power. 2 [Turn] = [Press] Cancel the display demonstrations Select “ DEMO ,” then “ DEMO OFF .” Set the clock Select “ CLOCK ” = “ CLOCK SET .
ENGLISH 7 OPERATIONS Listening to the radio 1 Select “FM” or “AM.” 2 Search for a station to listen—Auto Search. When a station is tuned in, searching stops. To stop searching, press the same button again. • You can also search for a station manually—Manual Search.
ENGLISH 8 Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 2 Select preset number “04.” 3 Selecting preset station or [Turn] = [Press] The following features are available only for FM Radio Data System stations.
ENGLISH 9 OPERATIONS To activate TA Standby Reception The TP (Traffic Programme) indicator either lights up or flashes. • If the TP indicator lights up, TA Standby Reception is activated. • If the TP indicator flashes, TA Standby Reception is not yet activated.
ENGLISH 10 Pressing (or holding) the following buttons allows you to... [Press] Pause/resume playback. MP3/WMA: Select folder [Press] Select track [Hold] Reverse/fast-forward track Disc operations 1 Turn on the power. 2 Insert a disc. All tracks will be played repeatedly until you change the source or eject the disc.
ENGLISH 11 OPERATIONS REPEAT TRACK RPT : Repeats current track FOLDER RPT : MP3/WMA: Repeats current folder RANDOM FOLDER RND : MP3/WMA: Randomly plays all tracks of current folder, then tracks of next folders ALL RND : Randomly plays all tracks • To cancel repeat play or random play, select “ RPT OFF ” or “ RND OFF .
ENGLISH 12 OPERATIONS & EXTERNAL DEVICES Listening to the other external components You can connect an external component to AUX (auxiliary) input jack on the control panel. Preparation: Make sure “ AUX ON ” is selected in the “ SRC SELECT ” = “ AUX IN ” setting, see page 19.
ENGLISH 13 EXTERNAL DEVICES Using the remote controller — RM-RK50 This unit can be remotely controlled as instructed here (with an optionally purchased remote controller).
ENGLISH 14 Selecting a preset sound mode You can select a preset sound mode suitable to the music genre. • See also page 16. • See page 15 for “USER” settings. Preset value setting for each sound mode Sound mode Preset value BASS MIDDLE TREBLE LOUD (loudness) Freq.
ENGLISH 15 SETTINGS 4 Adjust the sound elements of the selected tone. 1 Adjust the frequency. 2 Adjust the level. 3 Adjust the Q-slope. Sound elements Range/selectable items BASS MIDDLE TREBLE Frequency 60 Hz 80 Hz 100 Hz 200 Hz 0.5 kHz 1.0 kHz 1.5 kHz 2.
ENGLISH 16 Initial: Underlined Menu operations Category Menu items Selectable settings, [reference page] DEMO DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [6].
ENGLISH 17 SETTINGS Continued on the next page Category Menu items Selectable settings, [reference page] TUNER AF-REG * 4 Alternative frequency/ regionalization reception • AF ON • AF-REG ON • O.
ENGLISH 18 Category Menu items Selectable settings, [reference page] AUDIO FADER * 7, * 8 Fader R06 – F06 : Adjust the front and rear speaker output balance. (Initial: 00) BALANCE * 8 Balance L06 – R06 : Adjust the left and right speaker output balance.
ENGLISH 19 SETTINGS Creating your own color —USER Color You can create your own colors—“ DAY COLOR ” or “ NIGHT COLOR .” DAY COLOR : Used when “ DIMMER ” is set to “ DIMMER OFF .” NIGHT COLOR : Used when “ DIMMER ” is set to “ DIMMER ON .
ENGLISH 20 Basic operations Turning on the power • By pressing SRC button on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.
ENGLISH 21 REFERENCES • This unit can play back MP3/WMA files meeting the conditions below: – Bit rate of MP3: 32 kbps — 320 kbps – Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2) – Bit rate of WMA: 32 kbps — 320 kbps – Sampling frequency of WMA: 22.
ENGLISH 22 Playing MP3/WMA tracks from a USB device • While playing from a USB device, the playback order may differ from other players. • This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.
ENGLISH 23 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 24 Symptoms Remedies/Causes MP3/WMA playback • Noise is generated. Skip to another track or change the disc. (Do not add the extension code <.mp3> or <.wma> to non-MP3 or WMA tracks.) • A longer readout time is required (“READING” keeps flashing on the display).
ENGLISH 25 REFERENCES How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 26 AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz) Q1.
ENGLISH 27 REFERENCES CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: .
EN, GE, RU, GR 1008DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Sieh.
1 KD-R501/KD-R402/KD-R401 Installation/Connection Manual Einbau/Anschlußanleitung Руководство по установке/подключению Εγχειρίδιo εγκατάστασης/συνδέσεων 1008DTSMDTJEIN EN, GE, RU, GR ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems .
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
3 ENGLISH DEUTSCH A Rear ground terminal / Hintere Erdungsc- anschlußklemme / Задний разъем заземления / Ακρoδέκτης γείωσης στo πίσω µέρoς της συ.
4 Connecting the external amplifier or subwoofer / Anschließen des externen Verstärkers oder Subwoofers / Подключение внешнего усилителя или низкочастотно.
ENGLISH РУCCKИЙ УКРАЇНА CD RECEIVER РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ ПРИЙМАЧ З ПРОГРАВАЧЕМ КОМПАКТ-ДИСКІВ KD-R407 For installation and connections, refer to the separate manual.
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 Detaching the control panel Attaching the control panel How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc, see page 10.
ENGLISH 4 Basic operations p Detach the panel. q Change the display information. w • FM/AM : Search for station. • CD/USB : Select track. e Return to the previous menu. r AUX (auxiliary) input jack t USB (Universal Serial Bus) input jack * 1 Also known as “Control dial” in this manual.
ENGLISH 5 OPERATIONS Display window 1 Tr (track) indicator 2 Source display / Track number / Folder number / Time countdown indicator 3 DISC indicator 4 Sound mode indicators—CLASSIC, HIP HOP, JAZZ,.
ENGLISH 6 Preparation Canceling the display demonstration and setting the clock • See also page 15. 1 Turn on the power. 2 [Turn] = [Press] Cancel the display demonstrations Select “ DEMO ,” then “ DEMO OFF .” Set the clock Select “ CLOCK ” = “ CLOCK SET .
ENGLISH 7 OPERATIONS Listening to the radio 1 Select “FM,” “AM,” or “FM-LO.” 2 Search for a station to listen—Auto Search. When a station is tuned in, searching stops. To stop searching, press the same button again. • You can also search for a station manually—Manual Search.
ENGLISH 8 Manual presetting (FM/AM) You can preset up to 12 stations for FM, 6 stations for FM-LO, and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 2 Select preset number “04.” 3 Selecting preset station or [Turn] = [Press] The following features are available only for FM Radio Data System stations.
ENGLISH 9 OPERATIONS To activate TA Standby Reception The TP (Traffic Programme) indicator either lights up or flashes. • If the TP indicator lights up, TA Standby Reception is activated. • If the TP indicator flashes, TA Standby Reception is not yet activated.
ENGLISH 10 Pressing (or holding) the following buttons allows you to... [Press] Pause/resume playback MP3/WMA: Select folder [Press] Select track [Hold] Reverse/fast-forward track Selecting the playback modes You can use only one of the following playback modes at a time.
ENGLISH 11 OPERATIONS 3 REPEAT TRACK RPT : Repeats current track FOLDER RPT : MP3/WMA: Repeats current folder RANDOM FOLDER RND : MP3/WMA: Randomly plays all tracks of current folder, then tracks of next folders ALL RND : Randomly plays all tracks [Turn] = [Press] Listening to the USB device This unit can play MP3/WMA tracks stored in a USB device.
ENGLISH 12 OPERATIONS & EXTERNAL DEVICES Listening to the other external components You can connect an external component to AUX (auxiliary) input jack on the control panel. Preparation: Make sure “ AUX ON ” is selected in the “ SRC SELECT ” = “ AUX IN ” setting, see page 17.
ENGLISH 13 SETTINGS Selecting a preset sound mode You can select a preset sound mode suitable to the music genre. • See also page 15. • See page 14 for “USER” settings. Preset value setting for each sound mode Sound mode Preset value BASS MIDDLE TREBLE LOUD (loudness) Freq.
ENGLISH 14 4 Adjust the sound elements of the selected tone. 1 Adjust the frequency. 2 Adjust the level. 3 Adjust the Q-slope. Sound elements Range/selectable items BASS MIDDLE TREBLE Frequency 60 Hz 80 Hz 100 Hz 200 Hz 0.5 kHz 1.0 kHz 1.5 kHz 2.5 kHz 10.
ENGLISH 15 SETTINGS Initial: Underlined Menu operations Category Menu items Selectable settings, [reference page] DEMO DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [6].
ENGLISH 16 Category Menu items Selectable settings, [reference page] TUNER AF-REG * 4 Alternative frequency/ regionalization reception • AF ON • AF-REG ON • OFF : When the currently received signals become weak, the unit switches to another station (the programme may differ from the one currently received), [9].
ENGLISH 17 SETTINGS Category Menu items Selectable settings, [reference page] AUDIO VOL ADJUST Volume adjust VOL ADJ –05 — VOL ADJ +05 (Initial: VOL ADJ 00) : Preset the volume adjustment level of each source (except FM), compared to the FM volume level.
ENGLISH 18 Basic operations Turning on the power • By pressing SRC button on the unit, you can also turn on the power. If the source is ready, playback also starts. Turning off the power • If you turn off the power while listening to a track, playback will start from where it had been stopped previously next time you turn on the power.
ENGLISH 19 REFERENCES • This unit can play back MP3/WMA files meeting the conditions below: – Bit rate of MP3: 32 kbps — 320 kbps – Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2) – Bit rate of WMA: 32 kbps — 320 kbps – Sampling frequency of WMA: 22.
ENGLISH 20 Playing MP3/WMA tracks from a USB device • While playing from a USB device, the playback order may differ from other players. • This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.
ENGLISH 21 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 22 Symptoms Remedies/Causes MP3/WMA playback • A longer readout time is required (“READING” keeps flashing on the display). Do not use too many hierarchical levels and folders. • Tracks do not play back in the order you have intended them to play.
ENGLISH 23 REFERENCES How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 24 AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz) Q1.
ENGLISH 25 REFERENCES CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: .
EN, RU, UK 1008DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Затруднения при эксплуатации? Пожалуйста, п.
1 KD-R407 Installation/Connection Manual Руководство по установке/подключению Керівництво зі встановлення та з’єднання GET0575-002A [EE] ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems .
2 INSTALLATION (IN-DASH MOUNTING) The following illustration shows a typical installation. If you have any questions or require information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. • If you are not sure how to install this unit correctly, have it installed by a qualified technician.
3 Use modified wiring 2 if the unit does not turn on. Если приемник не включается, используйте преобразованную схему соединений 2 .
4 TROUBLESHOOTING • The f use blows. * Are the red and black leads connected correctly? • Power c annot be t urned o n. * Is the yellow lead connected? • No s ound fro m the spe akers. * Is the speaker output lead short-circuited? • Sou nd is dis torte d.
For canceling the display demonstration, see page 7. For installation and connections, refer to the separate manual. INSTRUCTIONS GET0585-001A [UI] CD RECEIVER KD-R504 Cover_KD-R504[UI]_f.
2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc, see page 9. • Be careful not to drop the disc when it ejects.
4 Basic operations Using the control panel p Detach the panel. q Change the display information. w • FM/AM : Search for station. • CD/USB : Select track. e Return to the previous menu. r Remote sensor t AUX (auxiliary) input jack y USB (Universal Serial Bus) input jack * 1 Also known as “Control dial” in this manual.
5 OPERATIONS Display window 1 Tr (track) indicator 2 Source display / Track number / Folder number / Time countdown indicator 3 DISC indicator 4 Sound mode indicators—CLASSIC, HIP HOP, JAZZ, ROCK, P.
6 Installing the lithium coin battery (CR2025) Caution: • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Battery shall not be exposed to excessive heat such as sunshine, fire, or the like. If the effectiveness of the remote controller decreases, replace the battery.
7 OPERATIONS Preparation Canceling the display demonstration and setting the clock • See also page 14. 1 Turn on the power. 2 [Turn] = [Press] Cancel the display demonstrations Select “ DEMO ,” then “ DEMO OFF .” Set the clock Select “ CLOCK ” = “ CLOCK SET .
8 Listening to the radio 1 Select “FM” or “AM.” 2 Search for a station to listen—Auto Search. When a station is tuned in, searching stops. To stop searching, press the same button again. • You can also search for a station manually—Manual Search.
9 OPERATIONS Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 2 Select preset number “04.” 3 Selecting preset station Disc operations 1 Turn on the power.
10 OPERATIONS Pressing (or holding) the following buttons allows you to... [Press] Pause/resume playback. MP3/WMA: Select folder [Press] Select track [Hold] Reverse/fast-forward track Selecting the playback modes You can use only one of the following playback modes at a time.
11 OPERATIONS & EXTERNAL DEVICES Listening to the other external components You can connect an external component to AUX (auxiliary) input jack on the control panel. Preparation: Make sure “ AUX ON ” is selected in the “ SRC SELECT ” = “ AUX IN ” setting, see page 16.
12 Selecting a preset sound mode You can select a preset sound mode suitable to the music genre. • See also page 14. Preset value setting for each sound mode Sound mode Preset value BASS MIDDLE TREBLE LOUD (loudness) Freq. Level Q Freq. Level Q Freq.
13 SETTINGS [Turn] = [Press] 3 Select a tone. 4 Adjust the sound elements of the selected tone. 1 Adjust the frequency. 2 Adjust the level. 3 Adjust the Q-slope. Sound elements Range/selectable items BASS MIDDLE TREBLE Frequency 60 Hz 80 Hz 100 Hz 200 Hz 0.
14 Initial: Underlined Menu operations Category Menu items Selectable settings, [reference page] DEMO DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7].
15 SETTINGS Category Menu items Selectable settings, [reference page] TUNER IF BAND Intermediate frequency band • AUTO • WIDE : Increases the tuner selectivity to reduce interference noises between adjacent stations.
16 SETTINGS & REFERENCES Basic operations Turning on the power • By pressing SRC button on the unit, you can also turn on the power. If the source is ready, playback also starts.
17 REFERENCES • This unit can play back MP3/WMA files meeting the conditions below: – Bit rate of MP3: 32 kbps — 320 kbps – Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2) – Bit rate of WMA: 32 kbps — 320 kbps – Sampling frequency of WMA: 22.
18 Playing MP3/WMA tracks from a USB device • While playing from a USB device, the playback order may differ from other players. • This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.
19 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
20 Symptoms Remedies/Causes MP3/WMA playback • A longer readout time is required (“READING” keeps flashing on the display). Do not use too many hierarchical levels and folders. • Tracks do not play back in the order you have intended them to play.
21 REFERENCES How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
22 AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz) Q1.
23 REFERENCES CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to .
© 2008 Victor Company of Japan, Limited EN 1008DTSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Rear_KD-R504[UI]_f.
1 KD-R504 Installation/Connection Manual GET0585-002A [UI] © 2008 Victor Company of Japan, Limited This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems . If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC car audio dealers.
2 A Typical connections ELECTRICAL CONNECTIONS Rear line out (see diagram ) Rear ground terminal 15 A fuse Black Blue with white stripe Red Yellow * 2 To the metallic body or chassis of the car Ignition switch Fuse block To an accessory terminal in the fuse block To the remote lead of other equipment (200 mA max.
ENGLISH EN, TH 0509DTSMDTJEIN © 2009 Victor Company of Japan, Limited Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit CD RECEIVER INSTRUCTIONS GET0584-001B [U/UH] For canceling the display demonstration, see page 7.
ENGLISH 2 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
ENGLISH 3 How to reset your unit • Your preset adjustments will also be erased. How to forcibly eject a disc • You can forcibly eject the loaded disc even if the disc is locked. To lock/unlock the disc, see page 9. • Be careful not to drop the disc when it ejects.
ENGLISH 4 Basic operations Using the control panel p Detach the panel. q Change the display information. w • FM/AM : Search for station. • CD/USB : Select track. e Return to the previous menu. r Remote sensor t AUX (auxiliary) input jack y USB (Universal Serial Bus) input jack * 1 Also known as “Control dial” in this manual.
ENGLISH 5 OPERATIONS Display window 1 Tr (track) indicator 2 Source display / Track number / Folder number / Time countdown indicator 3 DISC indicator 4 Sound mode indicators—CLASSIC, HIP HOP, JAZZ,.
ENGLISH 6 Installing the lithium coin battery (CR2025) Caution: • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
ENGLISH 7 OPERATIONS Preparation Canceling the display demonstration and setting the clock • See also page 14. 1 Turn on the power. 2 [Turn] = [Press] Cancel the display demonstrations Select “ DEMO ,” then “ DEMO OFF .” Set the clock Select “ CLOCK ” = “ CLOCK SET .
ENGLISH 8 Listening to the radio 1 Select “FM” or “AM.” 2 Search for a station to listen—Auto Search. When a station is tuned in, searching stops. To stop searching, press the same button again. • You can also search for a station manually—Manual Search.
ENGLISH 9 OPERATIONS Manual presetting (FM/AM) You can preset up to 18 stations for FM and 6 stations for AM. Ex.: Storing FM station of 92.50 MHz into preset number “04.” 1 2 Select preset number “04.” 3 Selecting preset station Disc operations 1 Turn on the power.
ENGLISH 10 OPERATIONS Pressing (or holding) the following buttons allows you to... [Press] Pause/resume playback. MP3/WMA: Select folder [Press] Select track [Hold] Reverse/fast-forward track Selecting the playback modes You can use only one of the following playback modes at a time.
ENGLISH 11 OPERATIONS & EXTERNAL DEVICES Listening to the other external components You can connect an external component to AUX (auxiliary) input jack on the control panel. Preparation: Make sure “ AUX ON ” is selected in the “ SRC SELECT ” = “ AUX IN ” setting, see page 16.
ENGLISH 12 Selecting a preset sound mode You can select a preset sound mode suitable to the music genre. • See also page 14. Preset value setting for each sound mode Sound mode Preset value BASS MIDDLE TREBLE LOUD (loudness) Freq. Level Q Freq. Level Q Freq.
ENGLISH 13 SETTINGS [Turn] = [Press] 3 Select a tone. 4 Adjust the sound elements of the selected tone. 1 Adjust the frequency. 2 Adjust the level. 3 Adjust the Q-slope. Sound elements Range/selectable items BASS MIDDLE TREBLE Frequency 60 Hz 80 Hz 100 Hz 200 Hz 0.
ENGLISH 14 Initial: Underlined Menu operations Category Menu items Selectable settings, [reference page] DEMO DEMO Display demonstration • DEMO ON • DEMO OFF : Display demonstration will be activated automatically if no operation is done for about 20 seconds, [7].
ENGLISH 15 SETTINGS Category Menu items Selectable settings, [reference page] TUNER IF BAND Intermediate frequency band • AUTO • WIDE : Increases the tuner selectivity to reduce interference noises between adjacent stations. (Stereo effect may be lost.
ENGLISH 16 SETTINGS & REFERENCES Basic operations Turning on the power • By pressing SRC button on the unit, you can also turn on the power. If the source is ready, playback also starts.
ENGLISH 17 REFERENCES • This unit can play back MP3/WMA files meeting the conditions below: – Bit rate of MP3: 32 kbps — 320 kbps – Sampling frequency of MP3: 32 kHz, 44.1 kHz, 48 kHz (for MPEG-1) 16 kHz, 22.05 kHz, 24 kHz (for MPEG-2) – Bit rate of WMA: 32 kbps — 320 kbps – Sampling frequency of WMA: 22.
ENGLISH 18 Playing MP3/WMA tracks from a USB device • While playing from a USB device, the playback order may differ from other players. • This unit may be unable to play back some USB devices or some files due to their characteristics or recording conditions.
ENGLISH 19 REFERENCES Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Remedies/Causes General • Sound cannot be heard from the speakers. • Adjust the volume to the optimum level.
ENGLISH 20 Symptoms Remedies/Causes MP3/WMA playback • A longer readout time is required (“READING” keeps flashing on the display). Do not use too many hierarchical levels and folders. • Tracks do not play back in the order you have intended them to play.
ENGLISH 21 REFERENCES How to clean the connectors Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.
ENGLISH 22 AUDIO AMPLIFIER SECTION Maximum Power Output: Front/Rear: 50 W per channel Continuous Power Output (RMS): Front/Rear: 19 W per channel into 4 Ω, 40 Hz to 20 000 Hz at no more than 0.8% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (60 Hz, 80 Hz, 100 Hz, 200 Hz) Q1.
ENGLISH 23 REFERENCES CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: .
ENGLISH EN, TH 0509DTSMDTJEIN © 2009 Victor Company of Japan, Limited Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit CD RECEIVER INSTRUCTIONS GET0584-001B [U/UH] For canceling the display demonstration, see page 7.
1 KD-R506/KD-R505/KD-RC502/KD-RC501 Installation/Connection Manual °“√µ‘¥µ—Èß/§ŸË¡◊Õ°“√µ‘¥µ—Èß GET0584-006B [U/UH] F Handles §—π∫—ߧ—∫ A / B Hard case/.
2 When using the optional stay / ‡¡◊ËÕ„™Èµ—«¬÷¥·∫∫‡≈◊Õ°‰¥È Note : When installing the unit on the mounting bracket, make sure to use the 8 mm-long screws.
3 ENGLISH ELECTRICAL CONNECTIONS ‰∑¬ °“√‡™◊ËÕ¡‚¥¬„™È ‰øøÈ“ A Typical connections / °“√‡™◊ËÕ¡µËÕ·∫∫ª°µ Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.
4 Connecting the external amplifier or subwoofer / °“√‡™◊ËÕ¡µËÕ‡§√◊ËÕߢ¬“¬‡’¬ß¿“¬πÕ° B You can connect an amplifier to upgrade your car stereo system. • Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so that it can be controlled through this unit.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC GET0576-001A è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC GET0576-001A - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC GET0576-001A imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC GET0576-001A ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC GET0576-001A, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC GET0576-001A.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC GET0576-001A. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC GET0576-001A insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.