Manuale d’uso / di manutenzione del prodotto CA-MXKB25 del fabbricante JVC
Vai alla pagina of 38
L VT1390-001A [B] COMP A CT COMPONENT SYSTEM CA-MXKB25 INSTR UCTIONS CA-MXKB25[B].book Page 1 Thursday, April 7, 2005 10:22 AM.
G-1 W arnings, Cautions and Others IMPORT ANT fo r th e U. K. DO NO T cut off the mains plug from this equipment. If the plug fit- ted is not suitable f or the pow er points in your home or the cab le is too shor t to reach a pow er point, then obtain an appropriate safety approv ed e xtension lead or consult your dealer .
G-2 SAFETY INSTRUCTIONS “SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT” This equipment has been disigned and manuf a ctured to meet international safety stand ards b ut, like an y electrical equipment, care must be tak en if you are to obtain th e best results and saf e ty is to be assured.
1 Introduction Thank you for purchasing the JVC Compact Component System. We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will find all the information you need to set up and use the system.
2 Table of Contents Introduction ................................................................................................................... 1 Features ................................ ..........................................................
3 Getting Started Accessories Make sure that you have all of the following items, which are supplied with the System. AM (MW) Loop Antenna (1) Remote Control (1) Batteries (2) If any of these items are missing, contact your dealer immediately.
4 Getting Started CAUTION: • Make all connections before plugging the System into an AC power outlet. About the FM Antenna Connecting the AM (MW) Antenna Rear Panel of the Unit • Even when connecting an outside AM (MW) anten na, keep the indoor AM (MW) loop connected.
5 Getting Started Connecting the Speakers Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminals. “Right” / “Left” i s labeled on the rear of the speaker. 1. Open each of the terminals to connect the speaker wire leads.
6 Getting Started Connecting to the Wall Outlet Plug the AC power cord into the wall outlet. Now, your System is at your command! DEMO Mode When the System is connected to the wall outlet, a DEMO mode displaying some of the system’s features automatically starts.
7 Basic Operations ) Turning the Power On and Off Turning the System On 1 Press the STANDBY/ON button. The display comes on. The STANDBY indicator goes out. The System comes on ready to continue in the mode it was in when the power was last turned off.
8 Basic Operations Adjusting the Volume Turn the VOLUME control on the Unit clockwise to increase the volume or turn it counterclockwise to decrease the volume. Press the VOLUME + button on th e Remote Control to increase the volume or press the VOLUME – button on the Remote Control to decrease the volume.
9 Using the Tuner You can listen to FM and AM (MW) stations. Stations can be tuned in manually, automatically, or from preset memory storage. ❏ Before listening to the radio: • Make sure that both the FM and AM (MW) antennas are cor- rectly connected.
10 Using the Tuner • In AM (MW) broadcast, recepti on sensitivity will be chang- ed by turning the AM (MW) loop antenna. Turn the AM (MW) loop antenna for best reception. Presetting Stations You can preset up to 10 FM stations and up to 10 AM (MW) sta- tions.
11 Using the CD Player This unit has been designed to playback the following CDs: • Audio CD • CD-R (CD-Recordable) • CD-RW (CD-ReWritable) • MP3 disc (MP3 files recorded on a CD-R or CD-RW)* When playing a CD-R or CD-RW • User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWri- table) can be played back when they are already “finalized.
12 Using the CD Player About Disc Indicator: The Disc indicator consists of the following three kinds of indicators: One Touch Play The power comes on, and operations are done automatically.
13 Using the CD Player Basics of Using the CD Player- Normal Play To Play CDs 1 Load CDs. 2 Press CD 6 button to play. The currently selected disc number (e.g. “CD DISC 1” ) ap- pears on the display. The first track of the selected CD begins playing.
14 Using the CD Player Programming the Playing Order of the Tracks You can program the playing order of the tracks on all the CDs. Note that you can only make a program when the CD Player is stopped. ❏ You can program up to 60 tracks in any desired order including the same tracks.
15 Using the CD Player Random Play The tracks of the selected CD wi ll play in no special order when you use this mode. 1 In Stop mode, set the CD Player in Random Play mode. On the Unit Press the RANDOM button to light the “RANDOM”, “REPAET” and “1 CD” indicator.
16 Using the Cassette Deck (Listening to a Tape) The Cassette Deck allows you to play, record, and dub audio tapes. ❏ Listening to type I tape is suitable for this Cassette Deck. One Touch Play By pressing the TAPE A 3 or TAPE B 3 button, the System will come on, and if a tape is in the d eck, it will start to play.
17 Using the Cassette Deck (Recording) Recording onto a cassette from any of the sound sources is simple. Just place a tape in Deck B, have the source ready, make one or two settings, and you’re ready to record. For each source, the pro- cedure is a little bit different so we explain each separately.
18 Using the Cassette Deck (Recording) Standard Recording This is the basic method for reco rding any source. The System also has special ways for recording CD to tape, and tape to tape, which save you time and effort, as well as give you some special effects.
19 Using an External Equipment Listening to the External Equipment You can listen to the external eq uipment such as MD recorder, cas- sette deck, or other auxiliary. ❏ First, make sure that the extern al equipment is properly connect- ed to the System.
20 Using the Timers Three types of timers are available: DAILY Timer Use this timer to set wake up everyday to music from any source, instead of an alarm clock. REC (Recording) Timer Unattended recording of radio broadcasts. You can set the starting time and ending time.
21 Using the Timers Setting the Daily Timer Once you have set the Daily Timer, the timer will be activated at the same time every day. The Timer indicator ( ) and “DAILY” indicator on the display shows that the Daily Timer you have set is in effect.
22 Using the Timers Preparation for each music source: Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting mode. When selecting TUNER FM or TUNER AM: Press the ¢ or 4 button to select the preset station number, then press the SET button.
23 Using the Timers Using the Unit You can set the time in the same way as for setting the Daily Tim- er. 1 Insert a blank or erasable tape into the Deck B and wind past the tape leader. 2 Press the CLOCK/TIMER button until “ON TIME” immediately afte r “REC TU” appears on the display.
24 Using the Timers Setting the SLEEP Timer Use the Sleep Timer to turn the System off after a certain number of minutes when it is playing. By setting the Sleep Timer, you can fall asleep to music and know that your System will turn off by it- self rather than play all night.
25 Care And Maintenance Handle your CDs and tapes carefully, and they will last a long time. Compact Discs CAUTION: • Do not use any solvent (for example, conven- tional record cleaner, spray thinner, benzine, etc.) to clean a CD. General Notes In general, you will have the be st performance by keeping your CDs and the mechanism clean.
26 Troubleshooting • If you are having a problem with your System, check this list for a possible solution before calling for service. • If you cannot solve the problem from the hints given here, or the System has been physically dama ged, call a qualified person, such as your dealer, for service.
27 CA-MXKB25[B].book Page 27 Thursday, April 7, 2 005 10:22 AM.
28 CA-MXKB25[B].book Page 28 Thursday, April 7, 2 005 10:22 AM.
0405NSMCREORI EN © 2005 Victor Company of J apan, Limited CA-MXKB25 COMPACT COMPONENT SYSTEM CA-MXKB25[B].book Page 1 Thursday, April 7, 2005 10:22 AM.
1 Grazie per aver acquistato questi altoparlanti della JVC. Prima di cominciare l’uso degli altoparlanti, leggete attentamente le istruzioni per assicurare le migliori prestazioni. Qualora sorgessero dei dubbi, rivolgetevi al vostro rivenditore JVC.
2 SPECIFICATIONS Type : 2-way 2-speaker Bass-Reflex Type Speakers Woofer : 13.0 cm cone × 1 Tweeter : 5.0 cm cone × 1 Power Handling Capacity : 30 W Impedance : 6 Ω Frequency Range : 65 Hz – 20 000 Hz Sound Pressure Level : 86 dB/W · m Dimensions (W × H × D) : 208 mm × 323 mm × 264 mm Mass : 3.
3 CARACT É RISTIQUES Type :Enceinte 2voices, 2 haut- parleurs type à r é flexion des basses Haut-parleurs M é dium : conique de 13,0 cm × 1 Aigus : conique de 5,0 cm × 1 Puissance maximale admis.
4 TECHNISCHE GEGEVENS Type : 2-weg 2-luidsprekers bass reflex Luidsprekers Woofer : 13,0 cm kegeltype × 1 Tweeter : 5,0 cm kegeltype × 1 Maximale vermogen : 30 W Impedantie : 6 Ω Frekwentiebereik .
5 SPECIFICAZIONI Tipo : Reflex basso con 2-altoparlanti e 2 vie Altoparlanti Woofer : Cono da 13,0 cm × 1 Tweeter : Cono da 5,0 cm × 1 Capacit à di potenza : 30 W Impedenza : 6 Ω Gamma di frequen.
6 SPECIFIKATIONER Type : 2-vejs basrefleks-h ø jttaler med 2-elementer H ø jttalere Bash ø jttaler : 13,0 cm membran × 1 Diskantenhed : 5,0 cm membran × 1 Belastningskapacitet : 30 W Impedans : 6.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC CA-MXKB25 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC CA-MXKB25 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC CA-MXKB25 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC CA-MXKB25 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC CA-MXKB25, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC CA-MXKB25.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC CA-MXKB25. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC CA-MXKB25 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
