Manuale d’uso / di manutenzione del prodotto CA-MXJ75R del fabbricante JVC
Vai alla pagina of 36
GVT0013-009A [ EV ] For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear , bottom or side of the cabinet. Retain this information for future reference.
Warnings, Cautions and Others / Caution –– switch! Disconnect the mains plug to shut the power off completely. The switch in any position does not disconnect the mains line. The power can be remote controlled. / – G-1 – CA-MXJ75R safety [EV] 99.
CAUTION T o reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture.
Front view Caution: Proper V entilation T o avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows: 1 Front: No obstructions and open spacing. 2 Sides/ T op/ Back: No obstructions should be placed in the areas shown by the dimensions below .
IMPORT ANT FOR LASER PRODUCTS / 2 W ARNING LABEL, PLACED INSIDE THE UNIT REPRODUCTION OF LABELS / 1 CLASSIFICA TION LABEL, PLACED ON EXTERIOR SURF ACE CLASS 1 LASER PRODUCT DANGER: Invisible laser radiation when open and interlock failed or defeated. AVOID DIRECT EXPOSURE TO BEAM.
– 1 – English Introduction About This Manual This manual is organized as follows: • The manual mainly explains operations using the b uttons and controls on the unit. Y ou can also use the b uttons on the remote control if they ha ve the same or similar names (or marks) as those on the unit.
– 2 – English Contents Location of the Buttons and Controls ....................... 3 Front Panel ................................................................. 4 Remote Control .......................................................... 5 Getting Started .
– 3 – English ST ANDBY CD 1 CD 1 CD 2 CD 3 CD 2 CD 3 PLA Y & EXCHANGER COMPACT DIGITAL AUDIO PHONES P ANEL OPEN / CLOSE T APE CD AUX FM AM / EJECT EJECT PLA Y REC/PLAY A UTO REVERSE A UTO REVE.
– 4 – English See pages in the parentheses for details. Front Panel 1 Disc trays 2 (standby/on) button and ST ANDBY lamp (10) 3 Display window 4 Remote sensor 5 P ANEL OPEN/CLOSE button (10) Pr essing this button also turns on the unit. 6 PHONES jack (10) 7 T APE 2 3 button and lamp (19) Pr essing this button also turns on the unit.
– 5 – English When using the remote control, point it at the remote sensor on the front panel. Remote Control Remote Control 1 Disc number buttons (CD 1, CD 2, and CD 3) (16) Pr essing one of these buttons also turns on the unit.
– 6 – English Getting Started Unpacking After unpacking, check to be sure that you have all the following items. The number in the parentheses indicates the quantity of the pieces supplied. • AM loop antenna (1) • FM antenna (1) • Remote control (1) • Batteries (2) If any is missing, consult your dealer immediately .
– 7 – English RIGHT LEFT SPEAKERS 1 Connect the AM loop antenna to the AM LOOP terminals as illustrated. 2 T urn the AM loop antenna until y ou ha ve the best r ece ption. T o connect an outdoor AM antenna When reception is poor , connect a single vinyl-covered wire to the AM EXT terminal and extend it horizontally .
– 8 – English CD OPTICAL DIGITAL OUTPUT AUX RIGHT LEFT IN OUT SUB WOOFER OUT SPEAKERS RIGHT LEFT RIGHT LEFT REAR CENTER ANTENNA GND AM EXT FM COAXIAL AM LOOP 75 RIGHT LEFT REAR CENTER T o input CD.
– 9 – English CD OPTICAL DIGITAL OUTPUT AUX RIGHT LEFT IN OUT SUB WOOFER OUT SPEAKERS RIGHT LEFT RIGHT LEFT REAR CENTER ANTENNA GND AM EXT FM COAXIAL AM LOOP 75 CD OPTICAL DIGIT AL OUTPUT When connecting the AC power cord into a wall outlet, the unit automatically starts display demonstration.
– 10 – English Common Operations Setting the Clock Before operating the unit any further , first set the clock built in this unit. 1 Pr ess P ANEL OPEN/CLOSE. The unit is turned on and the Powered Rolling Panel opens automatically . 2 Pr ess TIMER/CLOCK.
– 11 – English F ADE MUTING S. A. BASS SA-BASS1 SA-BASS2 OFF (Canceled) Reinforcing the Bass Sound The Signal Adaptive Bass function provided for this unit can enhance the bass sound while listening to any source at low volume. Y ou can use this function only for playback.
– 12 – English Creating Y our Own Sound Mode — Manual Mode Y ou can change SEA pattern to suit your preference. These changed settings can be stored in the MANUAL 1, 2, and 3 modes. • There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
– 13 – English Listening to FM and AM (MW/L W) Broadcasts T uning in a Station On the unit ONL Y : 1 Pr ess FM/AM. The unit automatically turns on and tunes in the previously tuned station (either FM or AM — MW/L W). The Powered Rolling Panel automatically opens.
– 14 – English Receiving FM Stations with RDS RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.
– 15 – English Switching to a Program T ype of Y our Choice T emporarily By receiving EON data sent by FM RDS stations, the EON function allows the unit to switch temporarily to a broadcast program of your choice (T A, NEWS, and INFO) from a different station.
– 16 – English Playing Back CDs Loading CDs 1 Pr ess 0 f or the disc tray (CD 1 to 3) y ou want to load a CD onto. The unit automatically turns on and the disc tray comes out. The Powered Rolling Panel also opens automatically . 2 Place a disc correctl y on the circle of the disc tray , with its la bel side up.
– 17 – English T o locate a particular point in a track During play , press and hold 1 or ¡ . • 1 : Fast reverses the disc. • ¡ : Fast forwards the disc. When using the remote control, press and hold 1 / 4 or ¢ / ¡ . T o go to another track Press 4 or ¢ repeatedly before or during playback.
– 18 – English T o exit from Random play mode, press PROGRAM/ RANDOM repeatedly again before or after play so that the unit enters another play mode. Even if y ou press 4 (or 1 / 4 on the remote control) Y ou cannot go back to the previous tracks during Random play .
– 19 – English Playing Back T apes Y ou can play back type I, type II, and type IV tapes without changing any settings. Playing Back a T ape 1 Pr ess EJECT ( 0 ) for the deck y ou want to use. 2 Put a cassette in, with the exposed part of the tape down.
– 20 – English Using Dolby Surround Continued Preparing for Dolby Surround Once you have finished adjustments for Dolby Surround, you can use the same adjustments every time you want to use each Dolby Surround mode — Dolby Pro Logic and Dolby 3 Stereo.
– 21 – English 4 ONL Y FOR “PRO LOGIC” Pr ess DELA Y TIME repeatedly to select the pr oper delay time of the r ear speaker output. • Each time you press the button, the delay time changes as follows. DELA Y1: Select this when the distance from you to your rear speakers is greater than that to the front speakers.
– 22 – English Recording Recording T apes on Deck B 1 Press EJECT 0 f or the deck B. 2 Put in a recordab le cassette, with the exposed part of the tape down. 3 Close the cassette holder gently . 4 Check the tape direction of deck B. • If the tape direction is not correct, press T APE 2 3 twice then 7 to change the tape direction.
– 23 – English CD Direct Recording Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program play . 1 Put a recorda ble cassette into deck B. 2 Place a disc correctl y on the circle of the disc tray , with its label side up.
– 24 – English Auto Edit Recording By using Auto Edit Recording, you can record the CD tracks to fit the tape. Auto Edit Recording makes a program by selecting the CD tracks in numerical order .
– 25 – English Using the T imers There are three timers available — Recording T imer , Daily T imer , and Sleep T imer . Before using the timers, you need to set the clock built in the unit. (See page 10.) Using Daily Timer W ith Daily T imer , you can wake to your favorite music or radio program.
– 26 – English ST ANDBY TIMER /CLOCK CANCEL DEMO TIMER /CLOCK TIMER /CLOCK DAILY Canceled ON TIME ON TIME Clock setting (See page 10.) REC 6 When selecting “– CD – – –” 1) Press 4 or ¢ to select the disc number , then press SET . 2) Press 4 or ¢ to set the track number , then press SET .
– 27 – English ST ANDBY SLEEP ZZZ... PRESET 10 Canceled 20 30 60 90 120 TIMER /CLOCK CANCEL DEMO Using Sleep T imer W ith Sleep T imer , you can fall asleep to music. Y ou can set Sleep T imer when the unit is turned on. How Sleep Timer actually works The unit automatically turns off after the specified time length passes.
– 28 – English Maintenance T o get the best performance of the unit, keep your discs, tapes, and mechanism clean. Handling cassette tapes • If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.
– 29 – English If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer , for service.
– 30 – English Specifications Amplifier Output Power (IEC 268-3/DIN) Front: 75 watts per channel, min. RMS, both channels driven into 6 ohms at 1 kHz with no more than 0.9% total harmonic distortion. Center: 25 watts, min. RMS, driven into 8 ohms at 1 kHz with no more than 0.
VICTOR COMP ANY OF JAP AN , L IMITED EN, CZ, PL, HU J V C 0599AOMQDSJEM CA-MXJ75R COVER 99.4.20, 3:02 PM 2.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC CA-MXJ75R è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC CA-MXJ75R - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC CA-MXJ75R imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC CA-MXJ75R ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC CA-MXJ75R, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC CA-MXJ75R.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC CA-MXJ75R. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC CA-MXJ75R insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
