Manuale d’uso / di manutenzione del prodotto AV-20NN15 del fabbricante JVC
Vai alla pagina of 36
GGT0079-001A-H COLOR TELEVISION AV -14FN15 AV -20NN15 Contents Knowing your TV’ s features .......................... 2 Remote control buttons and basic functions . 3 TV buttons and functions .............................. 5 Setting up your TV .....
2 Safety Instructions W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only fr om the power sour ce indicated on the rear of the TV .
3 Remote control buttons and basic functions No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL M Select the desired channel number .
4 Remote control buttons and basic functions How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2 .T o exit the MENU, press the DISPLA Y/BACK button* 8 or choose EXIT menu. Display the top menu. Press 5 / ∞ buttons 3 to choose a menu title.
5 TV buttons and functions The following illustr ations are for A V -14FN15 and A V -20NN15 only , which are used for e xplanation purposes . Y our TV may not look exactly lik e the illustration. Front of the TV AV -14FN15 AV -20NN15 Rear of the TV AV -14FN15 A V -20NN15 No.
6 Setting up your TV CA UTION • T urn off the equipment including the TV before connecting. 1 Connecting the antenna To install rod antenna Install into the top-rear holder .
7 Setting up your TV (continued) 5 Making the initial settings Set up your TV b y pressing MENU/OK button or waiting for 15 seconds , then the TV will operate by following steps as below: 7 • Press the red button to cancel the SETUP T OUR REST AR T function.
8 Basic setting for picture COLOR SYSTEM Y ou can select the appropriate color sy stem when the picture is not clear or no color appear s. Press the COLOR S YSTEM button to select a setting. In TV mode: NTSC 3.58 MHz (Fixed) In VIDEO mode: AUTO PAL SECAM NTSC3.
9 Advance setting for pictur e BLUE BACK Y ou can set the TV to automatically change to a blue screen and mute the sound if the signal is w eak or absent, or when ther e is no input from an antenna. Select the BLUE B A CK in the INST ALL menu, then choose ON or OFF .
10 Fav orite channel and video setting To register the favorite channel Y ou can register and recall 4 fav orite channels by using the color buttons (red, gr een, yello w , blue). 1 In TV mode, select a TV channel (CH02- CH69, CC01-CC125) you desired to register .
11 Customized setting VNR Y ou can reduce the picture noise . Select the VNR in the PICTURE FEA TURES menu under PICTURE menu, then choose a setting of VNR function. ❇ VNR MENU PICTURE PICTURE FEATURES OFF VNR is turned off. AUTO Effect of VNR is automatically controlled.
12 TV channel presetting To register the TV channels auto- matically Y ou can register the TV channels into the TV’s channel list automatically . 1 Display the INST ALL menu. ❇ MENU INSTALL 2 Choose AUTO PROGRAM, then press the MENU/OK button. 3 Press the 5 / ∞ button to select AIR or CABLE, then press the MENU/OK button.
13 Additional pr eparation The illustrations sho wn in this section are for A V -20NN15 only , which are used for e xplanation pur- poses. Y our TV may not look e xactly the same as the illustration. Before connecting • R ead the manuals provided with the de vices for the proper connection.
14 TV RF systems M Color systems TV mode: NTSC 3.58 MHz VIDEO mode: P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band.
15 MEMO GGT0079-001A-H-P02-15 12/23/04, 8:57 15.
0105-NIC-JMT © 2005 Victor Company of Japan, Limited GGT0079-001A-H-Cover 12/23/04, 8:57 20.
INSTRUCTIONS GGT0071-001A-H Contents Knowing your TV’ s features ....................................................... 3 Remote control buttons and basic functions .............................. 4 TV buttons and functions .........................
2 15 cm 10 cm 10 cm 15 cm W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY , OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV . 1 Operate only from the power source indicated on the rear of the TV .
3 Knowing your TV’ s features Confirm your TV’ s functions Some functions shown in this remote control may not be available for your TV . When you press a button concerned to a function that is not available for your TV , it does not work and the logo “Ø” appears on the screen.
4 Remote control buttons and basic functions No. Press T o 1 POWER T urn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number .
5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. * T o exit the menu, the on screen display will show BACK indicated in blue.
6 TV buttons and functions The illustrations shown below is for A V -14FT15 and A V -21Y A15 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated.
7 1 Connecting the aerial cable. If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with the aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable and audio cables.
8 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following steps as below: • Press 5 / ∞ button to select AIR or CABLE, press the MENU/OK button.TV will start searching for the channels.
9 COLOR SYSTEM Y ou can select the appropriate color system when the picture is not clear or no color appears. Press the COLOR SYSTEM button to select a setting.
10 Adjusting the picture – USER Y ou can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu.
11 BLUE BACK Y ou can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INST ALL menu, then choose ON or OFF . If you wish to continue viewing the poor picture, cancel the BLUE BACK function.
12 Basic setting for sound BALANCE Y ou can adjust the volume balance between the left and right speakers. Select the BALANCE in SOUND menu, then adjust the setting. SOUND TURBO Y ou can enjoy the emphatic low and high frequency levels. Press the SOUND TURBO to select ON or OFF .
13 CINEMA SURROUND Y ou can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. HIGH Listen to sound with more wider audience effect. LOW Listen to sound with less wider audience effect.
14 T o register the favorite channel Y ou can register and recall 4 favorite channels by using the color buttons (red, green, yellow , blue). 1 In TV mode, select a TV channel ( CH02-CH69, CC01-CC125) you desired to register . 2 Press and hold a color button for 3 seconds or more.
15 VNR Y ou can reduce the picture noise. Select the VNR in the PICTURE FEA TURES menu under PICTURE menu, then choose a setting of VNR function. OFF VNR is turned of f. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level.
16 AUTO SHUTOFF Y ou can set the TV to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast. Select AUTO SHUTOFF in INST ALL menu, then choose ON or OFF . The AUTO SHUT OFF function does not turn of f the TV ’ s main power .
17 T o register the TV channels automatically Y ou can register the TV channels into the TV ’ s channel list automatically . 1 Display the INST ALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. 3 Press the 5 / ∞ button to select AIR or CABLE, then press the MENU/OK button.
18 The illustrations shown in this section are for A V -14FT15 and A V - 21Y A15 only , which are used for explanation purpose. Y our TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection.
19 T roubleshooting If a problem occurs when you are using the TV , check the below troubleshooting guide before calling for repair . • Deactivate the BLUE BACK function if it is turned on. • Check the aerial cable and its connection with the TV .
20 TV RF systems M Color systems TV mode: NTSC 3.58 MHz VIDEO mode: P AL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JVC AV-20NN15 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JVC AV-20NN15 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JVC AV-20NN15 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JVC AV-20NN15 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JVC AV-20NN15, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JVC AV-20NN15.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JVC AV-20NN15. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JVC AV-20NN15 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
