Manuale d’uso / di manutenzione del prodotto F8 del fabbricante Jura Capresso
Vai alla pagina of 24
Operating Instructions and W arranty Customer Service 1-800-220-5701 Impr essa F7/F8 Fully Automatic Cof fee & Espr esso Center with Clearyl W ater Car e System 64694R3 CAPRESSO.
IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and personal injury , do not immerse cord, plugs or appliance in water or other liquids.
Notice: Y our Impressa F7/F8 has a 3-prong gr ounded plug. T o reduce the risk of electrical shock, this plug will fit in an outlet only one way . If the plug does not fit in the outlet, contact a qualified electrician. DO NOT modify the plug in any way .
READY 1. Height-Adjustable Coffee Spout 2. Operating Buttons (See Fig. 3) 3. Removable W ater T ank 4. Low W ater Flotation Device (See Fig. 7.4) 5. Clearyl W ater Care Cartridge* 6. Lid for W ater T ank 7. Ground Cof fee Funnel 8. Auto-Lid for Ground Cof fee Funnel 9.
Fig. 6 Fig. 7 Fig. 8 Fig. 5 Fig. 9 4 5. Fig. 3 Grind Fineness Selector Fig. 4 a. Coffee b. Steam / W ater a b Steam/W ater Selector READY c. d. e. f. g.
Fig. 13 Fig. 14 Fig. 12 a b c Tip Metal Cylinder Clip-on Connector with Soft Collar 6. Dual Frother Plus Fig. 10 Fig. 11 Fig. 12a.
Fig. 17 Fig. 18 Fig. 19 Fig. 20 Fig. 21 Fig. 15 Fig. 16 Steaming: up Frothing: down Fig. 22 a. Metal T ube b. . Chrome Sleeve c. Steam Nozzle 7..
T able of Contents 8. Important Safeguards ..........................................................2 Jura-Capresso / Addr ess Information .................................3 Illustrations...............................................................
1. PRODUCT REGISTRA TION Please read the enclosed pr oduct registration form now . Fill it out and mail or fax it to us within two weeks after purchasing your machine or register online thr ough our website: www .capresso.com. Important : This registration is part of your warranty (chapter 25).
matics and the light gaseous flavors that register on the palate. The high pressur e and the short brewing time prevent the extraction of bitter oils and release less caf feine than any other brewing method. Y ou will always make the absolute freshest and most aromatic cup of cof fee.
All Display Messages Are Shown in RED 5. F ACTOR Y SETTINGS Each machine leaves the factory with the following settings: Filter ..................... – (not installed) Hardness Level .... 2 Aroma ................... ROBUST T emperature .......... HIGH Time .
spout up and down a few times to clear the internal flow . Y ou are now ready to make cof fee. 7. ADDING COFFEE BEANS • Open the bean container lid (Fig. 1, 9), fill with beans (Fig. 5). The container holds approx. 220 grams (8 oz.). Close the lid. Frozen Beans : Thaw 3 to 4 hours befor e adding to be an container .
• T urn the dial to select any cup size between 1 OZ . and 8 OZ . Y our machine will always remember the last setting. After a few seconds the display will change back to READY . • When using the 2-Cup button the machine will automatically double the selected amount of coffee.
• Place a cup underneath the frother (Fig. 13). • T urn the Steam/Water Selector to the water symbol (Fig. 4b). Hot water will push through the fr other . The display shows the amount of hot water . Y ou can change it from 1 to 16 oz. by turning the Dial (Fig.
Steaming and frothing dir ectly in your cappuccino cup: With practice, you can steam and froth dir ectly in your cappuccino cup. First steam and froth the milk, then add your espresso shot. Please note: The less fat content the milk has the more fr oth will be created.
16a. INST ALLING & ACTIVA TING THE CLEAR YL WA TER CARTRIDGE Important: Never install the cartridge before or during "Preparing Machine For The First Time." • Make sure the water tank is empty . • Remove cartridge from its bag and rinse cartridge under water .
container . Push down gently (Fig.10). • Close the holder for the cartridge so that it engages in the water tank (Fig.11). • Fill the water tank with fresh cold water and r eplace. 1. T urn machine off. Push and hold the Rinse Button until the display shows CHG FIL TER / OPEN T AP .
6. Push the P button to get back to READY . FIL TER : See chapter 16a. HARDNESS : See chapter 17. 18a. AROMA 1. Push and hold P button until display shows FIL TER . 2. T urn Dial to AROMA . 3. Push Dial: ROBUST . 4. T urn Dial to select from ST ANDARD or ROBUST .
18e. CUPS MADE 1. Push and hold P button until display shows FIL TER . 2. T urn Dial to CUPS MADE . 3. Push Dial: The display shows the total number of cups brewed. 4. Push the 1-Cup or 2-Cup Buttons to display usage. 5. Open the Funnel Lid for 2 seconds to check how often this feature was used.
ample beans in the bean container , stir the beans so they flow into the grinder (chapter 7). W e recommend cleaning the bean container from time to time with a dry cloth befor e you refill beans (please make sure the machine is turned off when cleaning).
below within the next few days. Please use one white cleaning tablet (enclosed). The machine comes with a pack of 2 tablets. T o re-order cleaning tablets see chapter 22. Important : Once the cleaning program has started do not interrupt the procedur e.
5. The displays still shows SOL VENT IN T ANK / OPEN T AP . T urn the Steam/Water Selector to the water symbol. T he machine will pump the mixture thr ough the frother in intervals. During this procedur e the display shows DECALC.ON . When this cycle is finished the display shows CLOSE T AP .
All supplies are available thr ough: • The enclosed mail order form that came with your machine • Our toll free line at 1-800-220-5701 or • The Internet at www .capresso.com. 23. FROTHXPRESS SYSTEM This system and the Cappuccino Cleaner Liquid are included with the F8 (sold separately for the F7).
D. GRINDER MAKES AN EXTREMEL Y LOUD NOISE; NO BEANS ARE GROUND Reason :A stone is blocking the burr grinder . Solution : Call customer service at: 1-800-220-5701. E. THE DRAWER (Fig. 19) DOESN’T PULL OUT OR DISPLA Y SHOWS MALFUNCTION 8 Solution : T urn off and unplug machine.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Jura Capresso F8 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Jura Capresso F8 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Jura Capresso F8 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Jura Capresso F8 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Jura Capresso F8, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Jura Capresso F8.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Jura Capresso F8. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Jura Capresso F8 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
