Manuale d’uso / di manutenzione del prodotto 13709 del fabbricante Jura Capresso
Vai alla pagina of 27
IMPRESSA F70/F7/F707 Instructions for use 4/05 Art. Nr. 65391.
JURA IMPRESSA JURA Elektroapparate AG, CH-4626 Niederbuchsiten, Internet http://www.jura.com Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 6 Fig. 7 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 16 1 2 3 Fig. 5 B A Fig. 8 B Fig. 15 Fig. 17.
Control elements 1. Rotary Switch 2. Illuminated ring 3. ON / OFF symbol 4. 1 LARGE CUP symbol 5. 1 COFFEE symbol 6. 1 ESPRESSO symbol 7. MAINTENANCE symbol 8. START symbol 9. Display dialog system 10. Water tank with handle 11. Filler funnel for pre-ground coffee 12.
5 Contents 1. Safety information .......................................... page 6 1.1 Warning .............................................. page 6 1.2 Precautions .......................................... page 6 2. Preparing the IMPRESSA ..........
6 Introduction Thank you for purchasing the IMPRESSA. To ensure perfect func- tioning of your IMPRESSA, carefully read this operating manual and keep it for future reference.
7 Then fill the water tank and reinstall it. Make sure to install the tank properly, it must engage audibly. 2.4 Fill coffee beans To ensure that your machine will work perfectly for a long time a.
8 Close the steam / hot water draw-off tap (14). FILLING SYSTEM HEATING PRESS MAINT. Touch the symbol (7). Machine carries out a rinsing operation. RINSING READY If BEANS FILL is displayed, press the coffee draw-off key again.
9 5. Installation of Claris plus filter cartridges If the Claris plus filter cartridge is installed properly, de- scaling of the coffee machine is no longer required. For more information on the Claris plus filter cartridge refer to brochure «Claris plus.
10 Place a sufficiently large jug (approx 1 litre) under the replace- able hot water nozzle (16) and open the steam/hot water tap (14) (Fig. 12). RINSING FILTER CLOSE TAP Open the steam / hot water draw-off tap (14) (Fig. 12). HEATING UP READY 5.
11 9. Making 2 cups of coffee You cannot choose the strength of the coffee when making 2 cups. The machine automatically makes 2 mild cups of coffee. You can set the amount of water you want with the Rotary Switch (1) prior to drawing off coffee Touch the (8) symbol to stop drawing off coffee pre- maturely.
12 10. Drawing off pre-ground coffee Never use instant coffee or quick-coffee. We recommend that you always use powder from fresh coffee beans or, pre- ground, vacuum-packed coffee. Never fill in more than 2 portions of powder. The pre-ground coffee tank is no storage tank.
13 CLOSE TAP Close the steam / hot water draw-off tap (14). READY Before CLOSE TAP water may still escape the system. 12. Drawing off steam To ensure perfect operation, clean the 2-stage frothing jet (15) regularly. Screw the nozzle off as described in.
14 13.1 Attaching the Professional-Cappuccino Frother or the Easy-Cappuccino Frother to the IMPRESSA Remove either the hot water nozzle (Fig.5) or the 2-stage froth- ing jet (Fig. 6). Now attach the Professional-Cappuccino Frother or the Easy- Cappuccino Frother (Fig.
15 Fill water into a container (approx. 1/2 litre) and immerse the milk tube in it. Place a sufficiently large vessel under the Professional-Cappuc- cino Frother or the Easy-Cappuccino Frother. Draw steam until the water from the Professional-Cappuccino Frother or the Easy-Cappuccino Frother runs clean.
16 Press the Rotary Switch (1) RINSE Turn the Rotary Switch (1) until the required program item ap- pears on the display (9). e.g. RINSE, CLEAN, FILTER, DE-SCALE or EXIT e.g. CLEAN Press the Rotary Switch (1) The cleaning program starts.
17 The illuminated ring (2) is active. Turn the Rotary Switch (1) until TIME is displayed. TIME Now press the Rotary Switch (1) to start programming the time. --:-- Turn the rotary Switch (1) to adjust the hours.. 12:-- Press the Rotary Switch (1) to confirm the hour settings and to activate the minutes.
18 OFF AFT. HR Now press the Rotary Switch (1) to start programming the switch-off time. Switch-off time OFF AFT. HR 5.0 HR Turn the Rotary Switch (1) to adjust the hours. 1.0 HR Press the Rotary Switch (1) to save the setting.
19 LANGUAGE Turn the Rotary Switch (1) until EXIT appears Press the Rotary Switch (1) to leave the programming mode. READY 15.11 Programming Display 24H/AM/PM READY Press the Rotary Switch (1) until FILTER – / appears The illuminated ring (2) is active.
20 16. Maintenance 16.1 Filling in water FILL WATER If this information is displayed, drawing off products is no longer possible. Refill water as described in Chapter 2.3. READY The water tank should be rinsed daily and refilled with fresh water.
21 16.6 Cleaning the IMPRESSA After 200 draw-off operations or after 80 rinsing operations, the IMPRESSA must be cleaned. A message appears on the display, telling you to start the cleaning programme. You can still draw off coffee or hot water/steam. However, we recommend that you should clean the machine (Chapter 17) within the next few days.
22 READY CLEAN Touch the symbol (7). EMPTY TRAY Empty the tray (20). NO TRAY Insert the tray (20) again. Remove the drip grate (19). Put a container (1 l, Fig. 11) under the adjustable coffee spout (17). PRESS MAINT.
23 When using the de-scaling agent, immediately remove any splashes or drips from sensitive surfaces, i.e. natural stone and wooden surfaces, or take appropriate precautions. In any case wait until the de-scaling agent is used up and the tank is empty.
24 18.1 Decalcifying without display request Decalcifying without display request is only possible if the Claris plus filter is NOT programmed. Press the Rotary Switch (1) until FILTER – appears. Turn the Rotary Switch (1) until MAINTENANCE appears.
25 21. Messages Cause Remedy FILL WATER Water tank is empty. Refill water Float defective Rinse or de-scale water tank FILL BEANS Bean tank is empty. Refill beans Although you have refilled beans, the Draw off a cup of coffee. The message will message still appears.
26 22. Problems Problem Cause Remedy Very loud noise coming from the Foreign body in grinding gear Drawing off pre-ground coffee still possible grinding gear Have IMPRESSA checked by JURA Service Too .
27 23. Legal information These operating instructions contain all the information required for using, operating and maintaining the machine properly. Knowledge of and compliance with the specifications contained in these operating instructions is required for using the machine safely as well as for operational safety and safety during maintenance.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Jura Capresso 13709 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Jura Capresso 13709 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Jura Capresso 13709 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Jura Capresso 13709 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Jura Capresso 13709, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Jura Capresso 13709.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Jura Capresso 13709. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Jura Capresso 13709 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
