Manuale d’uso / di manutenzione del prodotto Phase 7 D30 del fabbricante JLA
Vai alla pagina of 39
D-30 Parts Manual 031102JCARRITA/rmoles ADC Part No. 450589 JLA Limited Meadowcroft Lane, Halifax Road Ripponden West Yorkshire, England HX6 4AJ Telephone: 01422 822282 / Fax: 01422 824390.
Retain This Manual In A Safe Place For Future Reference J.L.A. products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble free operation. ONLY qualified technicians should service this equipment.
Table of Contents OPL Control Door Assembly For Models Mfd. as of July 1, 2002 .................................................................................................. 2 OPL Control Door Assembly For Models Mfd. prior to July 1, 2002 .......
2 OPL Contr ol Door Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 883574 1 White OPL Control Door (includes illus.
3 Illus. No. Part No. Qty . Description 1 883294 1 White Control Door Assembly (includes illus. nos. 1 and 3) 2 150314 4 #10-32 x 1/2” TORX + BTN 3 1 17604 2 Noise Suppressor T ape (sold by the foot) 4 --------* 1 Logo 5 15401 1 4 #10-32 Multi-Thread U-Nut * Contact reseller for logo.
4 Phase 7 OPL Micr opr ocessor Contr ol Panel Assembly Illus. No. Part No. Qty . Description 1 1 12571 1 Phase 7 OPL Keyboard 2 850984 1 Phase 7 Microprocessor Controller (computer) Panel ONL Y 883301 1 Phase 7 OPL Reversing Microprocessor Controller (computer) Control Panel Assembly Complete (includes illus.
5 Illus. No. Part No. Qty . Description 1 122681 1 10-Pin Connector 2 122676 1 8-Pin Connector 3 122646 1 2-Pin Connector 4 122683 1 6-Pin T erminal 5 122640 1 9-Pin T erminal 6 122706 * #20-16 U.M.N.L. Socket 7 122669 * Female Crimp T erminal * As needed.
6 Fr ont Panel Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 883567 1 White Front Panel Assembly (includes illus.
7 Fr ont Panel Assembly For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty . Description 1 883137 1 White Front Panel Assembly (includes illus.
8 Main Door “S teel” Assembly Illus. No. Part No. Qty . Description 1 8 8 1 1 5 0 1 Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) 2 102354 1 Door Gasket 170731 1 Black Gasket Adhesive (10.3 oz. cartridge) 3 8 8 1 1 5 2 1 Black T op Hinge Block Assembly (includes illus.
9 Main Door Switch Assembly Illus. No. Part No. Qty . Description 1 150006 2 #6-32 x 7/8” Phillips Pan Head Machine Screw 2 152013 2 #6-32 Hex Nut 3 153010 2 #6 S tar W asher 4 137005 1 Door Switch 5 122636 2 Flag T erminal 6 88121 1 1 Black Main Door Switch Housing ONL Y 8 8 1 1 5 3 1 Black Main Door Switch Housing Complete (includes illus.
10 Basket (T umbler)/Support Assemblies Illus. No. Part No. Qty . Description 1* 800776 1 S tainless Steel Basket (tumbler) ONL Y (without felt collar) 883295 1 S tainless Steel Basket (tumbler)/Support Assemblies Complete (includes illus.
11 Dr op Lint Door Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 802277 1 Drop Lint Door (for OPL models) (includes illus.
12 Lint T rap Assembly For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 800401 1 Lint T rap Assembly Complete (includes illus.
13 Lint Drawer/Lint Drawer Switch Assembly For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty . Description 1 883140 1 White Lint Drawer Assembly (includes illus.
14 Illus. No. Part No. Qty . Description 1 100107 1 5L-670 V -Belt (basket [tumbler] to idler) 2 1 0 1 1 2 9 1 9” x 2-1/2” Compound Pulley 3 100103 1 4L-510 V -Belt 4 154301 2 5/16-18 x 1” Allen Setscrew 5 100705 1 3/16” x 3/16” x 1-3/8” Key 6 882576 1 Idler Bearing Assembly Complete (includes illus.
15 Basket (T umbler) Bearing Assembly Illus. No. Part No. Qty . Description 1 153002 3 5/16” Lock W asher 2 880213 1 1-1/4” Flange Bearing with Nylock Setscrew 3 153002 3 5/16” Lock W asher 4 15.
16 Motor Mount Assembly.
17 Illus. No. Part No. Qty . Description 1 100103 1 4L-510 V -Belt (motor to idler) 2 100705 1 3/16” x 3/16” x 1-3/8” Key 3 1 0 1 1 3 1 1 1/2” x 2-1/4” Motor Pulley (for models mfd. as of August 22, 2002) 1 0 1 13 3 1 5/8” x 2-1/4” Motor Pulley (for models mfd.
18 Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002.
19 Sensor Bracket Assemblies For Models Mfd. as of July 1, 2002 Illus. No. Part No. Qty . Description 1 880251 1 1/4” T emperature Sensor Probe Assembly (includes illus.
20 Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002.
21 Sensor Bracket Assemblies For Models Mfd. prior to July 1, 2002 Illus. No. Part No. Qty . Description 1 882533 1 1/4” T emperature Sensor Probe Assembly (includes illus.
22 Dir ect Spark Ignition (DSI) Burner Assembly.
23 Dir ect Spark Ignition (DSI) Burner Assembly Illus. No. Part No. Qty . Description 1 817088 1 Direct Spark Ignition (DSI) Burner Box ONL Y 816998** 1 N a tural Gas Burner Assembly (includes illus. nos. 1 through 8 and 10 through 31) 817208** 1 Liquid Propane (L.
24 Hot Surface Ignition (HSI) Gas Burner Assembly.
25 Illus. No. Part No. Qty . Description 1 150301 1 #8-18 x 7/16” Phillips Pan Head TEK Screw 2 128920 1 Hot Surface Ignitor (HSI) 24V 2-1/2” Long 3 128921 1 Hot Surface Ignition (HSI) Flame Senso.
26 Electric Oven Assembly.
27 Electric Oven Assembly Illus. No. Part No. Qty . Description 1 803003* 1 Small Electric Oven Box ONL Y ---------* 1 Electric Oven Assembly Complete 2 ---------* - Electric Element 3 150300 2 #10-16 x 1/2” Hex W asher TEK Screw 4 802800 1 Sail Switch Box with Bracket and Cover ONL Y 802801 1 Sail Switch Box Assembly Complete (includes illus.
28 Rear Electric Relay Panel Assembly.
29 Illus. No. Part No. Qty . Description 1 151000 2 #6-32 Pal Nut 2 150300 2 #10-16 x 1/2” Hex W asher TEK Screw 3 150008 2 #6-32 x 1-1/4” Phillips Pan Head Machine Screw 4 120716 1 2-Position T e.
30 Illus. No. Part No. Qty . Description 1 822752 1 S.A.F .E. T emperature Probe Assembly (includes illus. nos. 1 through 5) 2 154007 2 Push On Fastener 3 390390 1 Sensor Bracket (Only) 4 150301 2 #8-18 Phillips Pan Head TEK Screw 5 122647 1 Connector ONL Y S.
31 S.A.F .E. Solenoid and Piping Assembly Illus. No. Part No. Qty . Description 1 1651 14 1 S.A.F .E. Solenoid V alve 24V 50/60 Hz 2 143220 1 3/8” F .P .T . Brass T ee 3 143251 1 3/8” M.P .T . Brass Plug 4 143208 2 3/8” Comp x 3/8” M.P .T . Brass Connector 5 143099* 6' 3/8” OD x 0.
32 S team Coil/Air -Operated S team Damper Assembly.
33 Illus. No. Part No. Qty . Description 1 165013 1 S team Coil Assembly 2 153002 6 5/16” Lock W asher 3 152004 6 5/16-18 Hex Nut 4 152002 4 1/4-20 Hex Nut 5 153007 4 1/4” Lock W asher 6 820321 2 S team Damper Hinge Assembly 7 880835 1 S team Damper Assembly (includes illus.
34 Illus. No. Part No. Qty . Description 1 322809 1 Back Electrical Box Cover 2 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw 3* 314424 1 Gas T op Back Guard 322075 1 Electric T op Back Guard 4.
35 Electrical Oven Component Application Chart * When ordering Oven Assembly Complete, specify 3 wire or 4 wire when applicable, as well as if dryer has microprocessor controls .
36 Additional Parts A vailable Part No. Description 1 14006 “ W ARNING - Fire Hazards” Label 1 12280 “Clean Lint Screen” Label 1 14001 “CAUTION - Exhaust/Lint Screen” Label 1 14521 “Phas.
ADC 450589 1 - 03/29/02-15 2 * 10/16/02-15.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il JLA Phase 7 D30 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del JLA Phase 7 D30 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso JLA Phase 7 D30 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul JLA Phase 7 D30 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il JLA Phase 7 D30, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del JLA Phase 7 D30.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il JLA Phase 7 D30. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo JLA Phase 7 D30 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
