Manuale d’uso / di manutenzione del prodotto XP-P4IM533GV del fabbricante Intel
Vai alla pagina of 25
M-040402 XP-P4IM533GV Intel ® Pentium ® 4 Processor Motherboard User's Manual.
Motherboard XP-P4IM533GV May 11, 2004 May 1 1, 200 4 XP-P4IM533GV Motherboard Copyright Declaration ©2004 Gigatrend T echnology Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without express permission from Gigatrend T echnology .
Contents Motherboard Layout .......................................................................... 4 1. Production Introduction ............................................................... 5 1.1. Feature Summary ................................
4 English Motherboard Layout KB_MS COMA SOCKET 478 AT X LPT USB LAN FDD F_P ANEL F_USB1 PWR_LED BA T 1 ICH4 PCI1 PCI2 PCI3 CODEC IT8712 BIOS XP-P4IM533GV CPU_FAN VGA CD_IN A TX_12V Intel 845GV IDE2 DD.
English 5 CPU Socket 478 for Intel ® Pentium ® 4 (Northwood) with HT T echnology Intel ® Pentium ® 4 400/533MHz FSB 2nd cache depends on CPU Chipset North Bridge: Intel ® 845G V South Bridge: Intel ® ICH4 Memory 2 184-pin DDR DIMM sockets, supports up to 2GB DRAM (Max) Supports DDR333*/DDR266 DIMM Supports only 2.
6 English 1.2. I/O Back Panel and Connectors&Jumper Setting 1.2.2. Connectors&Jumper Setting FDD (Floppy Disk Drive Connector) The FDD connector is able to connect a single floppy disk drive via a FDD cable. Usually one edge of the FDD cable is marked in red, please attach this marked edge to position 1 on the connector.
English 7 CPU_F AN (CPU Fan Power Connector); SYS_F AN (System Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and possesses a ful-proof connection design. Most coolers are designed with color-coded power connector wires.
8 English F_AUDIO (Front Audio Connector) Connects to the audio connector located on the front panel of the system casing (dependent on case design). When use of the front panel audio connector is required, please remove the 5-6 pin, 9-10pin jumper.
English 9 2. Hardware Installation 2.1. Installation of a Pentium 4 CPU and Fan Sink 1. Please make sure that the CPU used is supported by your motherboard. 2. Please be aware of the placement position of the CPU. If the CPU does not insert properly, do not apply force but check the placement position.
10 English 4 Connect the 3-pin cooler power connector to the CPU Fan connector located on the motherboard. 2.2. Installation of Memory 1. Before installing or removing memory, please make sure that the computer power is turned off to prevent hardware damage.
English 11 2.4.1. Graphics Card Support List (The items below are all supported under the Windows XP operating system. When using an add-on graphics card, please first delete the onboard graphics driver before installing the driver for the add-on graphics card.
12 English Graphics Chip Maker Model Name Nvidia ASUS V9180TD ASUS V9480-TVD ASUS V9520 MSI MX440-VTD8X MS-8888 MSI Ti4600-TD-8X Leadtek WinFast A280LE TD Leadtek WinFast A310 TD Albatron NVIDIA 5950 .
English 13 3. BIOS Setup BIOS (Basic Input and Output System) stores all the information of the motherboard settings that is needed for system initiation within the CMOS. The CMOS SETUP utility allows the user to make changes in BIOS configurations that are required or to activate certain features.
14 English <F6> Gives the list of options available for each item <F7> Return to Optimized default values (not applicable to main setup screen) <F8> Enters Expert-Flash feature <F9> Displays system information <F10> Saves settings and exits setup 3.
English 15 n n n n n Floppy 3 Mode Support Allows user to configure a Japanese standard 3 Mode floppy drive. Options: Disabled (No 3 Mode drive installed) Drive A (3 Mode Drive installed in A:) Drive .
16 English " # " If the installed CPU is an Intel Pentium 4 CPU supporting Hyper-Threading Technology, the system will automatically provide this option. 3.3. Advanced BIOS Features ø Allows the configuration of advanced settings such as boot sequence, password check, etc.
English 17 3.4. Integrated Peripherals ø This menu allows you to control the various ports of the computer such as IDE, SA T A, USB, IEEE1394, COM port, LPT port, AC97 audio, etc. n n n n n On-Chip Primary PCI IDE Allows the user to enable or disable the first onboard IDE channel.
18 English n n n n n USB Controller Allows the user to enable or disable the onboard USB2.0 controller. (default:Enabled) n n n n n USB Keyboard Support Allows user to use a USB-based keyboard (Enable.
English 19 3.5. Power Management Setup ø This is used to control the various power saving features of the PC. n n n n n ACPI Suspend T ype Allows user to select the Advanced Configuration and Power I.
20 English 3.6. PnP/PCI Configuration ø This menu allows you to configure your PCI slots. Y ou can assign IRQ's for various PCI slots. n n n n n PCI 1 IRQ Assignment Allows you to assign an IRQ for the first PCI slot.
English 21 3.7. PC Health Status ø This menu displays the current CPU temperature, the fan speeds, voltages etc. n n n n n Current Voltage(V) Vcore / DDR25V / +3.
22 English 3.8. Frequency/V oltage Control ø This allows user to configure CPU frequency and voltage settings. ø This section is very dangerous for inexperienced users, and therefore it is not recom mended that these settings be altered. An incorrect setting can result in system instability , corrupt data, or permanent hardware damage.
English 23 n n n n n Host/DRAM Clock Ratio Allows the user to set the Host/DRAM Clock Ratio. If the FSB(Front Side Bus) is at 400MHz. 2.66 Memory Frequency = Host clock x 2.66. Auto Automatically sets memory frequency. (default:Auto) If the FSB(Front Side Bus) is at 533MHz.
24 English 3.9. T op Performance ø "T op Performance" allows faster system start. However , the result may differ depending on system specifications (includes hardware and OS). For example, certain hardware may become unstable under Windows XP but work reliably under the Windows NT operating system.
English 25 4. Driver Installation Driver installation for the Windows 98/98SE/200/ME/XP operating systems is simple. Once you insert the provided driver disks into your optical drive, the AUTORUN screen will appear . If this screen does not appear, you can use "D:setup.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Intel XP-P4IM533GV è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Intel XP-P4IM533GV - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Intel XP-P4IM533GV imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Intel XP-P4IM533GV ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Intel XP-P4IM533GV, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Intel XP-P4IM533GV.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Intel XP-P4IM533GV. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Intel XP-P4IM533GV insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
