Manuale d’uso / di manutenzione del prodotto QX80 (2014) del fabbricante Infiniti
Vai alla pagina of 578
2014 Infiniti QX80 Owner’s M anual Printing: June 2013 (09) / OM14E 0Z62U0 / Printed in U.S.A. For y our safety , r ead c arefully and keep in thi s v ehicle.
Y our INFINITI represents a new way of thinking about vehicle design. It integrates advanced engineering and superior crafts- manship with a simple, refined aesthetic sensitivity associated with traditional Ja- panese culture. The result is a different notion of luxury and beauty.
. AL WAYS provide information about the proper use of vehicle safety features to all occupants of the vehicle. . AL WAYS review this Owner ’ s Manual for important safety information.
SIC0697 If you see the symbol above, it means “ Do not do this ” or “ Do not let this happen ” . If you see a symbol similar to those above in an illustration, it means the arrow points to the front of the vehicle. Arrows in an illustration that are similar to those above indicate movement or action.
INFINITI CUSTOMER CARE PROGRAM INFINITI CARES ... Both INFINITI and your INFINITI retailer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your INFINITI retailer are our primary concerns. Y our INFINITI retailer is always available to assist you with all your automobile sales and service needs.
Illustrated table of contents 0 Safety — seats, seat belts and supplemental restraint system 1 Instruments and controls Pre-driving c hec ks and adjustments Monitor, climate, audio, phone and voice .
I n f o r m a t i o n P r o v i d e d b y :.
0 Illustrat ed table of c ontents Seats, seat belts and Supplemental Restraint System (SRS) ....................................................... 0-2 Exterior front ....................................................... 0-3 Exterior rear...........
0-2 Illustrated table of contents SSI0728 1. Seat belt for 3rd row center seat belt (P . 1-28) 2 . Roof-mounted curt ain side-impact and rollover supplemental air bags (P .1-55) 3. Head Restraints (P .1-10) — Front-seat Active Head Restraints (P .1-16) 4.
JVC0448X 1. Hood (P .3-20) 2. Windshield wiper and washer — Switch operation (P .2-34) — Rain-sensing auto wiper system (P .2-35) — Wiper blade replacement (P .8-20) — Window washer fluid (P .8-15) 3. Moonroof (P .2-63) 4. Power windows (P .2-61) 5.
0-4 Illustrated table of contents 17. Child safety rear door locks (P .3-6) *: if so equipped I n f o r m a t i o n P r o v i d e d b y :.
JVC0409X 1. Fuel-filler door (P .3-25) — Fuel recommendation (P . 9-4) 2. Antenna (P .4-82) 3. Rear combination light (bulb replace- ment) (P .8-28) 4. Rear window defroster (P .2-37) 5. Satellite antenna (P .4-47) 6. Rear view camera (P .4-21) 7. High-mounted stop light (bulb repla- cement) (P .
0-6 Illustrated table of contents JVC0410X 1. Cargo light (P .2-68) 2. Cup holders (3rd row seat) (P .2-55) 3. Rear ventilators (P .4-38) 4. Coat hooks (P .2-59) 5. Rear personal lights (P .2-66) 6. T ray (P .2-58) — USB memory operation* (P .4-67) — iPod ® player operation* (P .
19. Console box (P .2-57) — Power outlet (P .2-52) — Auxiliary input jacks* (P .4-78, P .4-84) — Rear automatic air conditioning system* (P .4-44) 2 0 .
0-8 Illustrated table of contents JVC0444X 1. Power lift gate switch* (P .3-20) 2. Instrument brightness control switch (P .2-43) 3. TRIP/RESET switch for twin trip od- ometer (P .2-7) 4. Headlight, fog light and turn signal switch — Headlight (P .2-38) — Turn signal (P .
14. Warning systems switch* (P . 2-48) — Lane Departure Warning (LDW)* (P .5- 21) — Blind Spot Warning (BSW)* (P . 5-31) — Forward Collision Warning (FCW)* (P .5-90) 15. BCI (Back-up Collision Intervention) switch* (P .5- 31) or Power lift gate switch* (P .
0-10 Illustrated table of contents SSI0733 1. Side ventilator (P .4-38) 2. Meters and gauges (P .2-6) 3. Hazard warning flasher switch (P .6-2) 4. Center ventilator (P .4-38) 5. Center multi-function control panel (P .4-3) — Vehicle information and setting buttons (P .
**: Refer to the separate Navigation System Owner ’ s Manual. SIC4450 1. T achometer (P .2-8) 2. Warning/Indic ator lights (P .2-11) 3. Speedometer (P .2-7) 4. Engine coolant temperature gauge (P .2-8) 5. V oltmeter (P .2-10) 6. Dot matrix liquid crystal display/ Odometer/twin trip odometer (P .
0-12 Illustrated table of contents SDI2585 VK56VD ENGINE 1. Window washer fluid reservoir (P .8-15) 2. Fuse/fusible link holder (P .8-23) 3. Engine oil dipstick (P .8-10) 4. Power steering fluid reservoir (P .8-13) 5. Engine oil filler cap (P .8-10) 6.
Warning light Name Page Anti-lock Braking System (ABS) warning light 2-12 Automatic Transmission (AT) chec k warning light 2-12 Automatic Transmission (AT) oil temperature warning light 2-12 Automatic.
0-14 Illustrated table of contents MEMO I n f o r m a t i o n P r o v i d e d b y :.
1 Safety — seats, seat belts and supplemental restraint system Seats ................................................................... 1-3 Front seats ...................................................... 1-4 2nd row seats .......................
Front seat-mounted side-impact supplemental air bag and roof-mounted curtain side-impact and rollover supplemental air bag systems ....................... 1-67 Seat belts with pretensioners (front seats).... 1-68 Supplemental air bag warning labels ..
SSS0133 WARNING . Do not ride in a moving vehicle when the seatback is reclined. This can be danger- ous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries.
1-4 Safety — seats, seat belts and supplemental restraint system FRONT SEA TS Front power seat adjustment Operating tips: . The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 sec- onds, then reactivate the switch.
SSS1052 Seat lifter: 1. Pull up or push down the adjusting switch to adjust the seat height until the desired position is achieved. 2. Tilt up or down the adjusting switch to adjust the front angle of the seat until the desired position is achieved (for driver ’ s seat).
1-6 Safety — seats, seat belts and supplemental restraint system SSS1081 Captain ’ s seat SSS1065 Bench seat Reclining Pull the reclining lever * A and position the seatback at the desired angle. Release the reclining lever after positioning the seat at the desired angle.
SSS1066 For manual type: T o enter the 3rd row seat, pull the lever * A or * B located on the 2nd row seat and fold the seatback forward * 1 at an angle over the seat base. Then lift up the seat base and tip the 2nd row seat forward * 2 . This will release the back of the seat so it may be tipped forward.
1-8 Safety — seats, seat belts and supplemental restraint system SSS1116 3RD ROW SEA TS The 3rd row power folding seat controls are located behind the 2nd row seat (both the driver ’ s and passenger ’ s side) on the 3rd row cup holder console * 1 .
. Do not ride in a moving vehicle when the seatback is reclined. This can be danger- ous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries.
1-10 Safety — seats, seat belts and supplemental restraint system tion. If they are not completely secured, passengers may be injured in an acci- dent or sudden stop. . Properly secure all cargo to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks.
JVR0201X The illustration shows the seating posi- tions equipped with head restraints. The head restraints are adjustable. Indicates the seating position is equipped with a head restraint.
1-12 Safety — seats, seat belts and supplemental restraint system Components 1. Head restraint 2. Adjustment notch (es) 3. Lock knob 4. Stalks SSS0997 Adjustment (front seats and 2nd row outboard seats) Adjust the head restraint so the center is level with the center of your ears.
SSS0994 T o lower, push and hold the lock knob and push the head restraint down. SSS0995 Removal (front seats and 2nd row outboard seats) Use the following procedure to remove the adjustable head restraints. 1. Pull the head restraint up to the highest position.
1-14 Safety — seats, seat belts and supplemental restraint system SSS0996 Install (front seats and 2nd row outboard seats) 1. Align the head restraint stalks with the holes in the seat. Make sure that the head restraint is facing the correct direction.
SSS1124 T o lower, push and hold the lock knob and push the head restraint down. SSS1125 Removal (3rd row seats) Use the following procedure to remove the head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob.
1-16 Safety — seats, seat belts and supplemental restraint system SSS1126 Install (3rd row seats) 1. Align the head restraint stalks with the holes in the seat. Make sure that the head restraint is facing the correct direction. The stalk with the adjustment notch must be installed in the hole with the lock knob * 1 .
JVR0202X The illustration shows the seating posi- tions equipped with headrests. Indicates the seating position is equipped with a removable headrest. + Indicates the seating position is not equipped with a head restraint or head- rest. JVR0203X Components (2nd row center seat) (if so equipped) 1.
1-18 Safety — seats, seat belts and supplemental restraint system SSS0969 Removal and attachment (2nd row center seat) (if so equipped) T o remove the headrest, push and hold the lock knob * 1 and pull the headrest up. If the headrest is removed, store it in a secure place.
. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. Be sure everyone in your vehicle is in a seat and using a seat belt properly. . Do not fold down the rear seats when occupants are in the rear seat area or any cargo is on the rear seats.
1-20 Safety — seats, seat belts and supplemental restraint system SSS1119 Manual Operation: 1. Pull lever located on the 2nd row seat. The seatback folds down and the seat base will tip forward. See “ Entry to 3rd row seat ” earlier in this section.
CAUTION When folding the 2nd row seat for maximum cargo hauling, be sure that cargo does not contact the cent er console of the captain ’ s seat (if so equipped) to avoid possible damage to the console.
1-22 Safety — seats, seat belts and supplemental restraint system SSS0136A SSS0134A WARNING . Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint.
. Do not wear the seat belt inside out or twisted. Doing so may reduce its effec- tiveness. . Do not allow more than one person to use the same seat belt.
1-24 Safety — seats, seat belts and supplemental restraint system PREGNANT WOMEN INFINITI recommends that pregnant women use seat belts. The seat belt should be worn snug, and always position the lap belt as low as possible around the hips, not the waist, and place the shoulder belt over your shoulder and across your chest.
could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. . For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat with both feet on the floor and adjust the seat belt properly.
1-26 Safety — seats, seat belts and supplemental restraint system SSS0292 Fastening the seat belts 1. Adjust the seat. (See “ Seats ” earlier in this section.) 2. Slowly pull the seat belt out of the retractor and insert the tongue into the buck le until you hear and feel the latch engage.
The ELR locks the seat belt when the vehicle slows down rapidly or during impacts. The Automatic Locking Retractor (ALR) mode (child restraint mode) locks the seat belt for child restraint installation. When the ALR mode is activated the seat belt cannot be extended again until the seat belt tongue is detached from the buck le and fully retracted.
1-28 Safety — seats, seat belts and supplemental restraint system SSS1109 Center of 2nd row seat (if so equipped) Selecting correct set of seat belts: The center seat belt buckle is identified by the CENTER mark * A . The center seat belt tongue can be fastened only into the center seat belt buckle.
SSS1077 Stowing 3rd row center seat belt: When folding down the 3rd row seat, the 3rd center seat belt can be retracted into a stowed position. 1. Hold the connector tongue * 1 so that the seat belt does not retract suddenly when the tongue is released from the connector buckle.
1-30 Safety — seats, seat belts and supplemental restraint system Attaching 3rd row center seat belt: Always be sure the 3rd center seat belt connector tongue and connector buck le are attached. Disconnect only when folding down the 3rd row seat. T o connect the buckle: 1.
SSS0896 Shoulder belt height adjustment (for front seats and 2nd row seats) The shoulder belt anchor height should be adjusted to the position best for you.
1-32 Safety — seats, seat belts and supplemental restraint system belts may retract slowly. Wipe the shoulder belt guide with a clean, dr y cloth. . Periodically chec k to see that the seat belt and the metal components such as buckles, tongues, retractors, flexible wires and anchors work properly.
Booster seats are used to help position a vehicle lap/shoulder belt on a child who can no longer use a forward-facing child restraint. WARNING Infants and children need special protection. The vehicle ’ s seat belts may not fit them properly. The shoulder belt may come too close to the face or neck.
1-34 Safety — seats, seat belts and supplemental restraint system shoulder belt should not cross the neck or face and should not fall off the shoulder. The lap belt should lie snugly across the lower hips or upper thighs, not the abdo- men. A booster seat can only be used in seating positions that have a three-point type seat belt.
ward-facing child restraint installa- tion using the seat belts ” later in this section. — Even with the INFINITI Advanced Air Bag System, never install a rear- facing child restraint in the front seat. An inflating air bag could seriously injure or kill a child.
1-36 Safety — seats, seat belts and supplemental restraint system SSS1113 LA TCH system lower anchor locations - captain ’ s seats SSS1114 LA TCH system lower anchor locations - bench seat Lower A.
structed. SSS1122 LA TCH lower anchor location LA TCH lower anchor location The LA TCH anchors are located at the rear of the seat cushion near the seatback.
1-38 Safety — seats, seat belts and supplemental restraint system SSS0643 LA TCH webbing-mounted attachment Installing c hild restraint LA TCH lower anc hor attac hments LA TCH compatible child restraints include two rigid or webbing-mounted attachments that can be connected to two anchors located at certain seating positions in your vehicle.
SSS1073 3rd row bench seat TOP TETHER STRAP CHILD RE- STRAINT If the manufacturer of your child restraint requires the use of a top tether strap, it must be secured to an anchor point. WARNING . In the 3rd row bench seat, a child restraint with a top tether strap can only be used in the center position.
1-40 Safety — seats, seat belts and supplemental restraint system SSS1102 Rear-facing web-mounted — step 2 2. Secure the child restraint anc hor at- tachments to the LA TCH lower anchors. Check to make sure the LA TCH attach- ment is properly attached to the lower anchors.
SSS0650 Rear-facing — step 4 4. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the LATCH attach- ment path. The child restraint should not move more than 1 inch (25 mm), from side to side.
1-42 Safety — seats, seat belts and supplemental restraint system . When installing a child restraint system in the 3rd center seat position, both the center seat belt connector tongue and buckle tongue must be secured. See “ 3rd row center seat belt ” earlier in this section.
SSS0655 Rear-facing — step 3 3. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Lock - ing Retractor (ALR) mode (child restraint mode). It reverts to the Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted.
1-44 Safety — seats, seat belts and supplemental restraint system SSS0658 Rear-facing — step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path.
SSS1104 Forward-f acing rigid-mounted — step 2 3. The back of the child restraint should be secured against the vehicle seat- back. If necessary, adjust or remove the head restraint to obtain the correct child restraint fit. If the head restraint is removed, store it in a secure place.
1-46 Safety — seats, seat belts and supplemental restraint system SSS0638 Forward-f acing — step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the LATCH attach- ment path.
2. Position the child restraint on the seat. Always follow the child restraint man- ufacturer ’ s instructions. The back of the child restraint should be secured against the vehicle seat- back. If necessary, adjust or remove the head restraint or headrest to obtain the correct child restraint fit.
1-48 Safety — seats, seat belts and supplemental restraint system SSS0651 Forward-f acing — step 4 4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Lock - ing Retractor (ALR) mode (child restraint mode).
SSS0641 Forward-f acing — step 8 8. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm), from side to side.
1-50 Safety — seats, seat belts and supplemental restraint system JVR0136X 2nd row captain ’ s seat JVR0137X 2nd row bench seat INST ALLING TOP TETHER STRAP (2nd row captain ’ s seats or 2nd row.
SSS1073 3rd row bench seat INST ALLING TOP TETHER STRAP (3rd row benc h seat) WARNING In the 3rd row bench seat, a child restraint with a top tether strap can only be used in the center position. Do not place in an outboard seating position and attempt to angle the tether strap to the center position.
1-52 Safety — seats, seat belts and supplemental restraint system LRS0455 Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: .
LRS0464 All U.S. stat es and Canadian provinces or territories require that infants and small childr en be restrained in an approved child restraint at all times while the vehicle is being operated. The instructions in this section apply to booster seat installation in the rear seats or the front passenger seat.
1-54 Safety — seats, seat belts and supplemental restraint system LRS0454 Front passenger position 3. The booster seat should be positioned on the vehicle seat so that it is stable. If necessary, adjust or remove the head restraint or headrest to obtain the correct booster seat fit.
PRECAUTIONS ON SUPPLEMENTAL RESTRAINT SYSTEM This Supplemental Restraint System (SRS) section contains important information concerning the following systems. . Driver and passenger supplemental front-impact air bag (INFINITI Advanced Air Bag System) .
1-56 Safety — seats, seat belts and supplemental restraint system SSS0131 SSS0132 WARNING . The supplemental front air bags ordina- rily will not inflate in the event of a side impact, rear impact, rollover, or lower severity frontal collision.
away as practical from the steering wheel or instrument panel. Always use the seat belts. . The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag Syst em monitors the severity of a collision and seat belt usage then inflates the air bags.
1-58 Safety — seats, seat belts and supplemental restraint system SSS0099 SSS0100 WARNING . Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations.
SSS0140 SSS0162 SSS0159 WARNING Front seat-mounted side-impact supplemen- tal air bags and roof-mounted curtain side- impact and rollover supplemental air bags: . The side-impact supplemental air bags ordinarily will not inflate in the event of a front impact, rear impact, rollover, or lower severity side collision.
1-60 Safety — seats, seat belts and supplemental restraint system . Do not use seat covers on the front seatbacks. They may interfere with side air bags inflation.
JVR0144X 1. Crash zone sensor 2. Supplemental front-impact air bag modules (INFINITI Advanced Air Bags) 3 . Roof-mounted curtain side-impact and rollover supplemental air bag inflators 4. Front seat-mounted side-impact sup- plemental air bag modules 5 .
1-62 Safety — seats, seat belts and supplemental restraint system bag warning light may flash. . If a forward facing child restraint is installed in the front passenger seat, do not position the front passenger seat so the child restraint contacts the instrument panel.
smoke. This smoke is not harmful and does not indicate a fire. Care should be taken not to inhale it, as it may cause irritation and choking. Those with a history of a breathing condition should get fresh air promptly. Front air bags, along with the use of seat belts, help to cushion the impact force on the head and chest of the front occupants.
1-64 Safety — seats, seat belts and supplemental restraint system of injury in an accident. Status light: The front passenger air bag status light is located on the instrument panel.
instead of being OFF . (See “ Child re- straints ” earlier in this section for proper use and installation.) If the front passenger seat is not occupied, the passenger air bag is designed not to inflate in a crash.
1-66 Safety — seats, seat belts and supplemental restraint system . Do not use water or acidic cleaners (hot steam cleaners) on the seat. This can damage the seat or occupant classifica- tion sensors. This can also affect the operation of the air bag system and result in serious personal injury.
SSS1092 FRONT SEA T-MOUNTED SIDE-IM- P ACT SUPPLEMENT AL AIR BAG AND ROOF-MOUNTED CURT AIN SIDE-IM- P ACT AND ROLL OVER SUPPLEMEN- T AL AIR BAG SYSTEMS The side air bags are located in the outside of the seatback of the front seats. The curtain and rollover air bags are located in the side roof rails.
1-68 Safety — seats, seat belts and supplemental restraint system impact and rollover situations, the curtain air bags will remain inflated for a short period of time. The side air bags and curtain and rollover air bags operate only when the ignition switch is in the ON position.
. No unauthorized changes should be made to any components or wiring of the pretensioner system. This is to prevent damage to or accidental activa- tion of the pretensioners. T ampering with the pretensioner system may result in serious personal injury.
1-70 Safety — seats, seat belts and supplemental restraint system SPA1097 SUPPLEMENT AL AIR BAG WARNING LIGHT The supplemental air bag warning light, displaying in the instrument panel, monitors the circuits for the air bag systems, pretensioners and all related wiring.
and pretensioner should be replaced by an INFINITI retailer. The air bag module and pretensioner system cannot be repaired. . The front air bag, side air bag, curtain and rollover air bag and the pretensioner should be inspected by an INFINITI retailer if there is any damage to the front end or side portion of the vehicle.
1-72 Safety — seats, seat belts and supplemental restraint system MEMO I n f o r m a t i o n P r o v i d e d b y :.
2 Instruments and contr ols Coc kpit ................................................................ 2-3 Instrument panel ................................................. 2-5 Meters and gauges .............................................. 2-6 Speedometer and odometer .
Intelligent Brake Assist (IBA) OFF switch (if so equipped) ..................................................... 2-50 V ehicle Dynamic Control (VDC) OFF switch ......... 2-50 Cloc k ................................................................. 2-51 Adjusting the time .
JVC0444X 1. Power lift gate switch* 2. Instrument brightness control switch 3. TRIP/RESET switch for twin trip od- ometer 4. Headlight, fog light and turn signal switch — Headlight — Turn signal — Fog light 5. Steering-wheel-mounted controls (left side) — Audio control steering switch — Hands-Free Phone System switch 6.
2-4 Instruments and controls 1 6. Electric tilting/telescopic steering wheel switch 17 . Intelligent Brake Assist (IBA) OFF switch* *: if so equipped I n f o r m a t i o n P r o v i d e d b y :.
SSI0733 1. Side ventilator 2. Meters and gauges 3. Hazard indicator flasher switch 4. Center ventilator 5. Center multi-function control panel — Vehicle information and setting buttons 6. Center display — Around View Monitor — Navigation system** — DVD player operation 7.
2-6 Instruments and controls SIC4450 1. T achometer* 2. Warning/Indic ator lights 3. Speedometer* 4. Engine coolant temperature gauge* 5. V oltmeter* 6.
SIC4369 Speedometer SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h).
2-8 Instruments and controls SIC4371 T ACHOMETER The tachometer indicates engine speed in revolutions per minute (RPM). Do not rev the engine into the red zone * 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce engine speed.
SIC4374 FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to 0 (Empty) after the ignition switch is pushed to the OFF position.
2-10 Instruments and controls CAUTION . This gauge is not designed to indicate low engine oil level. Use the dipstick to chec k the oil level. (See “ Engine oil ” in the “ 8. Maintenance and do-it-yourself ” section.) . If the gauge needle does not move with the proper amount of engine oil, have the vehicle checked by an INFINITI retailer.
Anti-lock Braking System (ABS) warning light Intelligent Key warning light Exterior light indicator Lane departure warning light (orange)* Front passenger air bag status light Automatic transmission c.
2-12 Instruments and controls CHECKING BULBS With all doors closed, apply the parking brake and push the ignition switch to the ON position without starti ng the engine.
again with the shift lever in the N (Neutral) position. (See “ INFINITI all-mode 4WD ® ” in the “ 5. Starting and driving ” section.) Blind Spot W arning (BSW)/ Blind Spot Intervention (BSI) .
2-14 Instruments and controls . If the brake fluid level is below the minimum or MIN mark on the brake fluid reservoir, do not drive until the brake system has been checked at an INFINITI retailer. Charge warning light If the light comes on while the engine is running, it may indicate the charging system is not functioning properly.
an INFINITI retailer as soon as possible. . If the 4WD warning light turns on when driving on dry or hard surfaced roads: — in the 4H(I) position, shift the 4WD shift switch to AUTO — in the 4L(O) position, stop the vehicle and shift the transmission shift lever to the “ N ” (Neutral) posi- tion and shift the 4WD shift switch to AUTO .
2-16 Instruments and controls Low tire pressure warning: If the vehicle is being driven with low tire pressure, the warning light will illuminate. A CHECK TIRE PRESSURE warning also appears in the dot matrix liquid crystal display. If you select the tire pressure information in the display, the L OW PRES- SURE information will be displayed.
. Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS. CAUTION . The TPMS is not a substitute for the regular tire pressure chec k. Be sure to chec k the tire pressure regularly. . If the vehicle is being driven at speeds of less than 16 MPH (25 km/h), the TPMS may not operate correctly .
2-18 Instruments and controls side air bag, curtain and rollover air bag systems and/or pretensioner seat belts are operational. If any of the following conditions occur, the front air bag, side air bag, curtain and rollover air bag and pretensioner systems needs servicing and your vehicle must be taken to your nearest INFINITI retailer.
See “ Automatic transmission ” in the “ 5. Starting and driving ” section for further details. Blind Spot Intervention (BSI) ON indicator light (green; if so equipped) The light comes on in green when the Blind Spot Intervention (BSI) system is turned on.
2-20 Instruments and controls When the IBA off indicator light illuminates with the warning chime sound while the IBA system is turned on, this light indicates that the system may not be functioning properly. Park the vehicle in a safe place. Check to see if the laser sensor is clean.
2) Avoid hard acceleration or decelera- tion. 3) Avoid steep uphill grades. 4) If possible, reduce the amount of cargo being hauled or towed. The malfunction indicator light may stop blinking and remain on. Have the vehicle inspected by an INFINITI retailer.
2-22 Instruments and controls Parking brake reminder chime The chime will sound if the vehicle is driven at more than 4 MPH (7 km/h) with the parking brake applied. Stop the vehicle and release the parking brake. Brake pad wear warning The disc brake pads have audible wear warnings.
JVI0631X Instruments and controls 2-23 I n f o r m a t i o n P r o v i d e d b y :.
2-24 Instruments and controls OPERA TIONAL INDICA TORS 1. Engine start operation indicator This indicator appears when the shift lever is in the P (Park) position. This indicator means that the engine will start by pushing the ignition switch with the brake pedal depressed.
For more details, see “ Remote keyless entry system ” in the “ 3. Pre-driving checks and adjustments ” section. 8. Parking brake release warning This warning appears when the vehicle speed is above 4 MPH ( 7 km/h) and the parking brake is applied.
2-26 Instruments and controls 17. “ TIMER ” indicator This indicator appears when the set “ TIMER ” indicator activates. Y ou can set the time for up to 6 hours. (See “ Trip computer ” later in this section.) 18. Low outside temperature warn- ing This warning appears if the outside tem- perature is below 37 8 F( 3 8 C).
SIC4325 MAINTENANCE INDICA TORS 1. Engine oil replacement indicator This indicator appears when the customer set time comes for changing the engine oil. Y ou can set or reset the distance for changing the engine oil. (See “ Trip compu- ter ” later in this section.
2-28 Instruments and controls SIC4494 SIC4420 TRIP C OMPUTER Switches for the trip computer are located on the right side of the combination meter panel.
Current fuel consumption ? Average fuel consumption and speed ? Elapsed time and trip odometer ? Distance to empty (dte) ? Outside air temperature (ICY) ? Setting ? Warning check 1. Current and average fuel con- sumption The current and average fuel consumption mode shows the current and average fuel consumption.
2-30 Instruments and controls The outside temperature sensor is located in front of the radiator. The sensor may be affected by road or engine heat, wind directions and other driving conditions. The display may differ from the actual outside temperature or the temperature displayed on various signs or billboards.
SIC2133 Y our vehicle has two types of security systems, as follows: . V ehicle security system . INFINITI Vehicle Immobilizer System The security condition will be shown by the security indicator light.
2-32 Instruments and controls 5. Confirm that the security indicator light comes on. The security indicator light stays on for about 30 seconds. The vehicle security system is now pre- armed. After about 30 seconds the vehicle security system automatically shifts into the armed phase.
cause undesired operation of the device. SIC2045 Security indicator light The security indicator light is located on the meter panel. It indicates the status of the INFINITI Vehicle Immobilizer System. The light blinks after the ignition switch was in the ACC, OFF and LOCK position.
2-34 Instruments and controls WARNING In freezing temperatures the washer solu- tion may freeze on the window and obscure your vision which may lead to an accident. Warm the window with the defroster before you wash the window. CAUTION . Do not operate the washer continuously for more than 30 seconds.
WASHER OPERA TION T o operate the washer, pull the lever toward the back of the vehicle * 5 until the desired amount of washer fluid is spread on the windshield. The wiper will automatically operate several times. The headlight washer (if so equipped) will also operate with operation of the wind- shield washer.
2-36 Instruments and controls sensor even if it is raining. . When the windshield glass is coated with water repellent, the speed of the rain-sensing auto wipers may be high- er even though the amount of the rainfall is small. . Be sure to turn off the rain-sensing auto wiper system when you use a car wash.
SIC4259 The rear window wiper and washer operate when the ignition switch is in the ON position. T urn the switch clockwise from the OFF position to operate the wiper. * 1 Intermittent (INT) — intermittent op- eration (not adjustable) * 2 Low (ON) — continuous low speed operation Push the switch forward * 3 to operate the washer.
2-38 Instruments and controls XENON HEADLIGHTS WARNING HIGH VOL TAGE . When xenon headlights are on, they produce a high voltage. T o prevent an electric shoc k, never attempt to modify or disassemble. Always have your xenon headlights replaced at an INFINITI retai- ler.
SIC3268 Autolight system The autolight system allows the headlights to be set so they turn on and off automatically . T o set the autolight system: 1. Make sure the headlight switch is in the AUTO position * 1 . 2. Push the ignition switch to the ON position.
2-40 Instruments and controls SIC3269 Headlight beam select * 1 T o select the low beam, put the lever in the neutral position as shown. * 2 T o select the high beam, push the lever forward while the switch is in the position. Pull it back to select the low beam.
SIC2275 Headlight aiming control (if so equipped) Depending on the number of occupants in the vehicle and the load it is carrying, the headlight axis may be higher than desired. If the vehicle is traveling on a hilly road, the headlights may directly hit the rear view mirror of the vehicle ahead or the wind- shield of the oncoming vehicle.
2-42 Instruments and controls (Reverse) — When the steering wheel is turned clockwise . Left-side headlight — When the headlight switch is ON — When the shift lever is in any position other than P (Park) or R (Reverse) — When the vehicle is driven at a speed above 16 MPH (25km/h).
SIC4378 INSTRUMENT BRIGHTNESS CON- TROL The instrument brightness control switch can be operated when the ignition switch is in the ON position. When the switch is operated, the dot matrix liquid crystal display switches to the brightness adjust- ment mode.
2-44 Instruments and controls SIC3272 FOG LIGHT SWITCH T o turn the fog lights on, turn the headlight switch to the position, then turn the switch to the position. To turn them off, turn the switch to the OFF position. The headlights must be on for the fog lights to operate.
SIC4444 T o sound the horn, push the center pad area of the steering wheel. WARNING Do not disassemble the horn. Doing so could affect proper operation of the supple- mental front air bag system. T ampering with the supplemental front air bag system may result in serious personal injury.
2-46 Instruments and controls SIC2770 FRONT The front seats can be warmed by built-in heaters. The switches located on the instrument panel can be operated inde- pendently of each other. 1. Start the engine. 2. Select heat range. . For high heat, push the HI (High) side of the switch * 1 .
3. To turn off the heater, return the switch to the level position. Make sure the indicator light goes off. The heater is controlled by a thermo- stat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on.
2-48 Instruments and controls . Do not put anything on the seat which insulates heat, such as a blanket, cushion, seat cover, etc. Otherwise, the seat may become overheated. . Do not place anything hard or heavy on the seat or pierce it with a pin or similar object.
SIC4454 For driving or starting the vehicle on snowy roads or slippery areas, push on the SNOW mode switch. The SNOW mode indicator light will illuminate. When the SNOW mode is activated, engine output is controlled to avoid wheel spin. Push off the SNOW mode for normal driving.
2-50 Instruments and controls SIC3844 The vehicle should be driven with the Intelligent Brake Assist (IBA) system on for most driving conditions. The Intelligent Brake Assist (IBA) system will sound a warning chime to alert the driver when the vehicle is traveling too close to the vehicle ahead and will apply the brake control if necessary.
“ V ehicle Dynamic Control (VDC) system ” in the “ 5. Starting and driving ” section.) SIC3325 If the power supply is disconnected, the clock will not indicate the correct time. Readjust the time. ADJUSTING THE TIME 1. To set the clock forward, push the button * 1 .
2-52 Instruments and controls CAUTION . Use power outlet with the engine run- ning to avoid discharging the vehicle battery. . Avoid using power outlet when the air conditioner, headlights or rear window defroster is on. . Before inserting or disconnecting a plug, be sure the electrical accessory being used is turned OFF .
T ype A The power outlet is used for powering electrical accessories such as cellular telephones. CAUTION . The outlet and plug may be hot during or immediately after use. . Do not use with accessories that exceed a combined power draw of 12 volts, 120W (10A) for all the power outlets.
2-54 Instruments and controls CUP HOLDERS CAUTION . Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. . Use only soft cups in the cup holder. Hard objects can injure you in an accident.
SIC3118 T ype A 2nd row seat T ype A: T o open the cup holder, push the lid * 1 . The flap will be folded down when insert- ing a large container. T o close, lower the cup holder lid and push it down lightly. T o clean the front cup holder, pull up the inside tray * 2 and remove it.
2-56 Instruments and controls SIC4501 Soft bottle holder CAUTION . Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. . Do not use bottle holder for open liquid containers.
SIC4393 GL OVE BOX WARNING Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. T o open the glove box, pull the handle * 1 . T o close, push the lid in until the lock latches. T o lock * 2 /unlock * 3 the glove box, use the mechanic al key.
2-58 Instruments and controls SIC4422 Rear (if so equipped) T o open the lid, push the knob up * A and pull up the lid. T o close, push the lid down until the lock latches. SIC4423 Pock et: T o open the pocket, pull the knob * 1 . T o close, push the lid until the lock latches.
SIC3505 C OA T HOOKS The coat hooks are equipped at the rear assist grips. CAUTION Do not place items which are more than 2 lb (1 kg) on the hook. SIC4446 LUGGAGE HOOK S WARNING . Always make sure that the cargo is properly secured. Use the suitable ropes and hooks.
2-60 Instruments and controls JVI0309X CARGO FL OOR BOX Push the handle to open the cargo floor board * 1 . SIC4447 ROOF RACK Always distribute the luggage evenly on the roof rack. Do not load more than 221 lb (100 kg) on the roof rails. Observe the maximum load limit shown on the cross- bars or roof carriers when you attach them on the roof rails.
CAUTION Use care when placing or removing items from the roof rack. If you cannot comfortably lift the items onto the roof rack from the ground, use a ladder or stool. POWER WINDOWS WARNING . Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the win- dows.
2-62 Instruments and controls Locking passengers ’ windows When the lock button * C is pushed in, only the driver side window can be opened or closed. Push it in again to cancel. SIC4353 Passenger side power window switch The passenger side switch will open or close only the corresponding window.
Auto reverse function WARNING There are some small distances immediately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window. If the control unit detects something caught in the window as it is closing, the window will be immediately lowered.
2-64 Instruments and controls AUTOMA TIC MOONROOF The moonroof only operates when the ignition switch is in the ON position. The automatic moonroof is operational for about 45 seconds, even if the ignition switch is pushed to the OFF position.
switch. Depending on the envir onment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being cau ght in the moonroof occurs. If the moonroof does not operate If the moonroof does not operate properly, perform the following procedure to initi- alize the moonroof operation system.
2-66 Instruments and controls SIC3249 MAP LIGHTS Push the button as illustrated to turn the light on or off. SIC3250 REAR PERSONAL LIGHTS Push the button as illustrated to turn the light on or off. SIC3251 INTERIOR LIGHT CONTROL SWITCH The interior light control switc h has three positions: ON, DOOR and OFF.
. ignition switch is switched to the LOCK or OFF position — remain on for about 15 seconds. . doors are unlocked by pushing the UNL OCK button on the Intelligent Key or door handle request switch with the ignition switch in the LOCK or OFF position — remain on for about 15 seconds.
2-68 Instruments and controls SIC4418 The cargo light switch has three positions: ON * 1 , center * 2 and OFF * 3 . ON position When the switch is in the ON position * 1 , the cargo light will illuminate. Center position When the switch is in the center position * 2 , the cargo light will illuminate when the lift gate is opened.
unconsciousness or death. PROGRAMMING HomeLink ® If you have any questions or are having difficulty programming your HomeLink ® buttons, refer to the HomeLink ® web site at: www.
2-70 Instruments and controls JVI0429X 3 . Press and hold the programmed HomeLink ® button and observe the indicator light. . If the indicator light * 1 is solid/ continuous, programming is com- plete and your device should acti- vate when the HomeLink ® button is pressed and released.
button. During programming, your hand- held transmitter may automatically stop transmitting. Continue to press and hold the desired HomeLink ® button while you press and re-press ( “ cycle ” ) your hand- held transmitter every two seconds until the frequency signal has been learned.
2-72 Instruments and controls 2. The indicator light will begin to flash after 20 seconds. Without releasing the HomeLink ® button, proceed with “ Pro- gramming HomeLink ® ” - Step 1. For questions or comments, contact HomeLink ® at: www.homelink.
3 Pre-driving chec ks and adjustments Keys .................................................................... 3-2 Intelligent Key ................................................. 3-2 V alet hand-off..................................................
3-2 Pre-driving chec ks and adjustments A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see an INFINITI retailer for duplicates by using the key number.
— The Intelligent Key is water resis- tant; however, wetting may damage the Intelligent K ey. If the Intelligent Key gets wet, immediately wipe until it is completely dry.
3-4 Pre-driving checks and adjustments CAUTION Always carry the mechanical key installed in the Intelligent Key. VALET HAND-OFF When you have to leave a key with a valet, give them the Intelligent Key itself and keep the mechanical key with you to protect your belongings.
. Y ou can switch the lock system to the mode that allows you to open all the doors when the key is turned once. (See “ How to use SETTING button ” in the “ 4.
3-6 Pre-driving checks and adjustments Lock out protection When the power door lock switch (driver or front passenger) is moved to the lock position with any door open, all doors will lock and unlock automatically.
WARNING . Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use. . The Intelligent Key transmits radio waves when the buttons are pushed.
3-8 Pre-driving checks and adjustments CAUTION . Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function. . Do not drop the Intelligent Key. . Do not strike the Intelligent Key sharply against another object.
SPA2074 INTELLIGENT KEY OPERA TING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch * 1 .
3-10 Pre-driving checks and adjustments you carry the key with you and then lock the doors. . Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door.
When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver ’ s or front passenger ’ s) * A or the lift gate request switch * B within the range of operation.
3-12 Pre-driving checks and adjustments . When the Intelligent Key is placed inside or near metallic materials. Unlocking doors and fuel-filler door 1. Push the door handle request switch (driver ’ s or front passenger ’ s) * A or the lift gate request switch * B once while carrying the Intelligent Key with you.
TROUBLESHOOTING GUIDE Symptom Possible cause Action to take When pushing the ignition switch to stop the engine The SHIFT P warning appears on the display and the inside warning chime sounds con- tinuously or for a few seconds. The shift lever is not in the P (Park) position.
3-14 Pre-driving checks and adjustments Symptom Possible cause Action to take When pushing the ignition switch to start the engine The Intelligent Key battery indicator appears on the display. The battery charge is low. Replace the battery with a new one.
WARNING The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that radio waves may affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight.
3-16 Pre-driving checks and adjustments * A LOCK button * B UNL OCK button * C Power lift gate button * D P ANIC button * E Remote engine start button HOW TO USE REMOTE KEYLESS ENTRY SYSTEM When you lock or unlock the doors or the lift gate, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation.
The power lift gate button cannot be operated when the ignition switch is in the ON position. Using panic alarm If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows: 1. Push the PANIC button * D on the Intelligent Key for more than 1 second.
3-18 Pre-driving checks and adjustments driving. For further instructions, see “ Driv- ing the vehicle ” in the “ 5. Starting and driving ” section. Extending engine run time: The remote engine start function can be extended one time by performing the steps listed in “ Operating a remote engine start ” earlier in this section.
flashes twice. When the UNLOCK button is pushed, neither the hazard indicator nor the horn operates. Hazard indicator and horn mode: DOOR LOCK DOOR UNLOCK Intelligent Key system (Using door handle req.
3-20 Pre-driving checks and adjustments SPA2775 1. Pull the hood lock release handle * 1 located below the instrument panel; the hood will then spring up slightly. 2. Pull the lever * 2 up at the front of the hood with your finger tips and raise the hood.
SPA2774 OPERA TING MANUAL LIFT GA TE T o open the lift gate, unlock it and push the lift gate opener switch * A . Pull up the lift gate to open. The lift gate can be unlocked by: . pushing the unlock button on the Intelligent Key twice. . pushing the lift gate request switch with the Intelligent Key carried on you.
3-22 Pre-driving checks and adjustments SPA2793 Power lift gate switch — Instrument panel SPA2776 Lift gate opener switch JVP0214X Intelligent Key SPA2796 Power lift gate switch — Lift gate Power open When the lift gate is fully closed, the lift gate will fully open automatically by: .
. pushing the power lift gate switch * D on the lower part of the lift gate The hazard flashes 4 times and the outside chime sounds when the lift gate starts closing. NOTE: When the lift gate is closed, it remains unlocked . Manually lock the lift gate.
3-24 Pre-driving checks and adjustments SPA2777 Safe Mode If the gas stays of the lift gate * 1 lose pressure, the power lift gate safe mode is activated. When the safe mode is activated, the lift gate intermittently closes. Then the lift gate will be pulled to the closed and latched position by a motor.
SPA2778 LIFT GA TE RELEASE LEVER If the lift gate cannot be opened with the door lock switch due to a discharged battery, follow these steps. 1. Remove the cover * A inside of the lift gate using a suitable tool. 2. Move the lever * B as illustrated to open the lift gate.
3-26 Pre-driving checks and adjustments rear of the vehicle. . Push the power door lock switch to the UNL OCK position. T o loc k, close the fuel-filler door securely and lock all doors by operating the door handle request switch, the LOCK button on the Intelligent Key , the mec hanical key or the power door lock switch.
T urn the cap counterclockwise to remove. T o tighten, turn the cap clockwise until a single click is heard. SPA2753 T o remove the fuel-filler cap: 1. Turn the fuel-filler cap counterclockwise to remove. 2. Put the fuel-filler cap on the cap holder * A while refueling.
3-28 Pre-driving checks and adjustments 3. Push the switch * A on the right side of the combination meter panel for longer than 1 second to turn off the LOOSE FUEL CAP warning after tighten- ing the fuel cap. WARNING . Do not adjust the steering wheel while driving.
positioner ” later in this section. SIC3451 CAUTION . Do not store the main sun visor before storing the extension sun visor. . Do not pull the extension sun visor forcedly downward. 1. To block out glare from the front, swing down the main sun visor * 1 .
3-30 Pre-driving checks and adjustments SPA2447 INSIDE MIRROR Adjust the height and the angle of the inside mirror to the desired position. SPA2450-A Automatic anti-glare type The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle.
SPA2739 Adjusting outside mirrors The outside mirror control switch is located on the driver ’ s door armrest. The outside mirror will operate only when the ignition switch is in the AC C or ON position. Move the switch right or left to select the right or left side mirror * 1 , then adjust using the control switch * 2 .
3-32 Pre-driving checks and adjustments them again electrically before driving. The outside rearview mirror remote control operates when the ignition switch is in the “ AC C ” or “ ON ” position. T o fold the outside rearview mirrors, push the outside rearview mirror folding switch to the “ CLOSE ” position * 1 .
SPA2756 SET/memory switches The automatic drive positioner system has three features: . Entry/exit function . Memory storage . Setting memory function ENTRY/EXIT FUNCTION This system is designed so that the driver ’ s seat and steering column will automati- cally move when the automatic transmis- sion shift lever is in the P (Park) position.
3-34 Pre-driving checks and adjustments MEMORY STORAGE Two positions for the driver ’ s seat, steering column and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to use the mem- ory system. 1. Move the shift lever to the P (Park) position.
The driver ’ s seat, steering column and outside mirrors will move to the mem- orized position or to the exit position when the entry/exit function is set to active with the indicator light flashing, and then the light will stay on for approximately 5 seconds.
3-36 Pre-driving checks and adjustments MEMO I n f o r m a t i o n P r o v i d e d b y :.
4 Monitor, climate, audio, phone and voice rec ogni- tion systems Safety note .......................................................... 4-3 Center multi-function control panel ...................... 4-3 How to use INFINITI controller.................
Care and maintenance ................................... 4-97 Car phone or CB radio ....................................... 4-98 Bluetooth ® Hands-Free Phone System ............... 4-98 Regulatory information ................................ 4-100 V oice commands .
WARNING . Do not disassemble or modify this system. If you do, it may result in accidents, fire, or electric shock. . Do not use this system if you notice any abnormality, such as a frozen screen or lack of sound. Continued use of the system may result in accident, fire or electric shock.
4-4 Monitor, climate, audio, phone and voice recognition systems SAA3025 HOW TO USE INFINITI C ONTROLLER Choose an item on the display by rotating or pushing the center dial * 1 upward/ downward, and push the ENTER button * 2 for operation.
SAA2473 Example T ouc h screen operation With this system, the same operations as those for the INFINITI controller are possi- ble using the touch screen operation. Selecting the item: T ouch an item to select it. T o select the “ Audio ” settings, touch the “ Audio ” area * 1 on the screen.
4-6 Monitor, climate, audio, phone and voice recognition systems . Delete: Deletes the last character that has been input with one touch. Push and hold the button to delete all of the char- acters. . OK: Completes character inputs. T ouc h screen maintenance If you clean the display screen, use a dry, soft cloth.
SAA2477 HOW TO SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the display screen in menus. To select each key item, highlight the preferred item using the INFINITI controller and push the ENTER button. Whenever a menu selection is made or menu item is highlighted, different areas on the screen provide you with important information.
4-8 Monitor, climate, audio, phone and voice recognition systems JVH0256M V ehicle information display 1. Push the INFO button on the control panel. 2. Select an item from the INFO menu. 3. After viewing or adjusting the informa- tion on the following screens, push the BACK button to return to the INFO menu.
Fuel Economy information The approximat e distance to empty, aver- age fuel economy and current fuel econo- my will be displayed for reference. T o reset the average fuel economy (Avg Fuel Econ), select the “ Reset Fuel Eco ” key.
4-10 Monitor, climate, audio, phone and voice recognition systems Starting and driving ” section. * When the ignition switch is in the AC C position, the “ Tire Pressure ” key is not displayed. SAA2481 SAA2482 Maintenance information The maintenance intervals can be dis- played for the engine oil, oil filter, tire and other reminders.
button ” later in this section.) SAA3003 The Reminder will be automatically dis- played when the specified distance has been driven and every time the ignition switch is pushed to the ACC or ON position. The reminder will not appear while driving. Select the “ OK ” key to hide the reminder for the rest of the current drive.
4-12 Monitor, climate, audio, phone and voice recognition systems position, the “ Navigation Version ” key is displayed after pushing the INFO button. GPS Position: For the details of this item, see the separate Navigation System Owner ’ s Man- ual.
Speed Sensitive Vol. (if so equipped): The audio system ’ s volume is increased with the vehicle speed. Select the “ Speed Sensitive V ol. ” and adjust the effect level with the INFINITI controller. The Speed Sensitive Volume function is turned off when the level is set to OFF.
4-14 Monitor, climate, audio, phone and voice recognition systems Y ou can also adjust the guidance voice volume by turning the VOLUME control knob while voice guidance is being an- nounced. Ringtone/Incoming Call/Outgoing Call: For the details of these items, see “ Blue- tooth ® Hands-Free Phone System ” later in this section.
. “ Back -up Collision Intervention (BCI) system ” in the “ 5. Starting and driving ” section. SAA3008 Others settings The Others settings display will appear when pushing the SETTING button and selecting the “ Others ” key. The following items are available: .
4-16 Monitor, climate, audio, phone and voice recognition systems SAA2486 Display settings The display as illustrated will appear when pushing the SETTING button and selecting the “ Display ” key. Display Adjustment: T o adjust the display settings, select the “ Display Adjustment ” key.
Light Sensitivity: Adjust the sensitivity of the automatic headlights higher (right) or lower (left). Light Off Delay: Choose the duration of the automatic headlight off timer from 0, 30, 45, 60, 90, 120, 150 and 180 second periods.
4-18 Monitor, climate, audio, phone and voice recognition systems This clock will indicate the time almost exactly because it is always adjusted by the GPS system. Cloc k Format (24h): When this item is turned to ON, the 24- hour clock is displayed. When this item is not turned to ON, the 12-hour clock is displayed.
CAMERA settings The “ CAMERA ” screen will appear when pushing the SETTING button, selecting the “ Camera ” key with the INFINITI controller and pushing the ENTER button. For the details about the camera system operation, see “ Around View TM Monitor settings ” later in this section.
4-20 Monitor, climate, audio, phone and voice recognition systems SAA2492 Full Screen Display: The full screen display will appear when selecting the “ Full Screen Display ” key. T o operate the Image Viewer or to change the settings, select the desired key using the INFINITI controller.
When you push the CAMERA button or shift the shift lever into the R (Reverse) position while the ignition switch is in the ON position, the Around View Monitor oper- ates. The monitor displays various views of the position of the vehicle. Available views: .
4-22 Monitor, climate, audio, phone and voice recognition systems may enter the camera unit causing water condensation on the lens, a malfunction, fire or an electric shock. . Do not strike the cameras. They are precision instruments. Doing so could cause a malfunction or cause damage resulting in a fire or an electric shock.
: Shift the shift lever : Select the “ Change View ” key on the screen : Push the CAMERA button * A : Original screen before the Around View Monitor is operated * B : Rear view/bird-eye view scree.
4-24 Monitor, climate, audio, phone and voice recognition systems . The view on the driver ’ s side or the wide view can be changed to the front view by shifting the shift lever out of the R (Reverse) position * 12 / * 14 .
SAA1840 Front view SAA1896 Rear view Front and rear view Guiding lines, which indicate the vehicle width and distances to objects with re- ference to the vehicle body line * A , are displayed on the monitor. Distance guide lines: Indicate distances from the vehicle body.
4-26 Monitor, climate, audio, phone and voice recognition systems Bird-eye view WARNING . Objects in the bird-eye view will appear further than the actual distance because the bird-eye view is a pseudo view that is processed by combining the views from the cameras on the outside mirrors, the front and the rear of the vehicle.
the predictive course lines are shown at back of the vehicle. SAA1842 Front-side view Guiding lines: Guiding lines that indicate the width and the front end of the vehicle are displayed on the monitor. The front-of-vehicle line * 1 shows the front part of the vehicle.
4-28 Monitor, climate, audio, phone and voice recognition systems JVH0321X Rear-wide view The rear-wide view shows a wider area on the entire screen and allows the chec king of the blind corners on the right and left sides.
actual distance. For example, the display shows 3 ft (1 m) to the place * A , but the actual 3 ft (1 m) distance on the hill is the place * B . Note that any object on the hill is viewed in the monitor further than it appears.
4-30 Monitor, climate, audio, phone and voice recognition systems SAA1923 Moving near a projecting object The predictive course lines * A do not touch the object in the display. However, the vehicle may hit the object if it projects over the actual moving course.
. This function is designed as an aid to the driver in detecting large stationar y objects to help avoid damaging the vehicle. . The system is not designed to prevent contact with small or moving objects. . The system will not detect small objects below the bumper, and may not detect objects close to the bumper or on the ground.
4-32 Monitor, climate, audio, phone and voice recognition systems JVH0266X When the “ ” * 1 is selected, the indicator * 2 will turn off and the sonar will be turned off temporarily. The Moving Object Detection (MOD) system will also be turned off at the same time.
mirror and rear view mirror and turn and chec k the surrounding to ensure it is safe to maneuver. . The MOD system does not have the ability to detect the surrounding sta- tionary objects.
4-34 Monitor, climate, audio, phone and voice recognition systems While the sonar or the BCI chime (if so equipped) is beeping, the MOD system does not chime. A blue MOD icon * 3 is displayed in the view where the MOD system is operative. A gray MOD icon * 3 is displayed in the view where the MOD system is not operative.
Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor while the vehicle is moving. Make sure the parking brake is firmly applied.
4-36 Monitor, climate, audio, phone and voice recognition systems JVH0269X Moving Object Detection (MOD): Activate or deactivate the Moving Object Detection (MOD) system. When this item is set to ON, the MOD is activated. When this item is turned to OFF (indicator turns off), the MOD system is deactivated.
JVH0271X When the “ [X] ” icon is displayed on the screen, the camera image may be receiving temporary electronic disturbances from surrounding devices. This will not hinder normal driving operation but the system should be inspected by an INFINITI retailer if it occurs frequently.
4-38 Monitor, climate, audio, phone and voice recognition systems SAA3053 C enter ventilators Open/close the ventilators by moving the control to either direction. : This symbol indicates that the ventilators are closed. Moving the side control to this direction will close the ventilators.
WARNING . The air conditioner cooling function operates only when the engine is run- ning. . Do not leave children or adults who would normally require the support of others alone in your vehicle.
4-40 Monitor, climate, audio, phone and voice recognition systems SAA3059 Without Advanced Climate Contr ol System SAA3161 With Advanced Climate Contr ol System 1. “ AUTO ” automatic climate control ON button/T emperature control dial (dri- ver side) 2.
AUTOMA TIC CLIMA TE CONTROL Automatic operation Cooling and/or dehumidified heating (AUTO): This mode may be used all year round. The system works automatically to control the inside temperature, air flow distribution and fan speed after the preferred tempera- ture is set manually.
4-42 Monitor, climate, audio, phone and voice recognition systems Manual operation Fan speed control: Push the fan speed increase “ ” or decrease “ ” buttons to manually con- trol the fan speed. Push the “ AUTO ” button to return to automatic control of the fan speed.
intake control with exhaust gas detecting sensor. SAA2734 Ion control: This unit generates highly concentrated Plasmacluster ® ions into the air blown from the ventilators and reduces odor absorbed into the interior trim.
4-44 Monitor, climate, audio, phone and voice recognition systems turned off). . The outside temperature is about 32 8 F (0 8 C) or more. When the automatic intake air control is ON, for the first 5 m.
screen displayed will also turn off the rear automatic air conditioning system. Rear Heating (A/C off): 1. Push the “ REAR ” button to display the rear air conditioner screen on the front display when the rear automatic air conditioning system is on.
4-46 Monitor, climate, audio, phone and voice recognition systems . Rear control buttons The rear seat passengers can adjust the rear automatic air conditioning system using the control switches at the rear of the center console. The rear control buttons do not function when the rear air conditioner screen is shown on the front display.
The climate control system is equipped with a natural grape seed polyphenol filter which collects and neutralizes dirt, pollen, dust, etc. T o make sure that the air conditioner heats, defogs and ventilates efficiently, replace the filter in accordance with the maintenance schedule in the INFINITI Ser- vice and Maintenance Guide.
4-48 Monitor, climate, audio, phone and voice recognition systems equipment is used. These characteristics are completely normal in a given reception area, and do not indicate any malfunction in your INFINITI radio system. Reception conditions will constantly change because of vehicle movement.
cles exist. Static: Caused by thunderstorms, electrical power lines, electric signs and even traffic lights. Satellite radio reception: When the satellite radio is used for the first time or the battery has been replaced, the satellite radio may not work properly.
4-50 Monitor, climate, audio, phone and voice recognition systems tion. — 3.1 in (8 cm) discs — CDs that are not round — CDs with a paper label — CDs that are warped, scratched, or have abnormal edges . This audio system can only play pre- recorded CDs.
malfunction. — 3.1 in (8 cm) discs — CD/DVDs that are not round — CD/DVDs with a paper label — CD/DVDs that are warped, scratched or have abnormal edges — This audio system can only play prerecorded CD/DVDs. It has no capabilities to record or burn CD/ DVDs.
4-52 Monitor, climate, audio, phone and voice recognition systems USB (Universal Serial Bus) WARNING Do not connect or disconnect the USB device while driving. Doing so can be a distraction. If distracted you could lose control of your vehicle and cause an accident or serious injury.
device and dehumidify or ventilate the USB player completely. . Do not connect a USB device if a connector, cable or USB port is wet. Allow the connector, cable, and USB port to dry c ompletely before connect- ing the USB device. (Wait for 24 hours or more until it is dr y.
4-54 Monitor, climate, audio, phone and voice recognition systems encoded with AAC are generally smaller in size and deliver a higher quality of sound than MP3. . Bit rate — Bit rate denotes the number of bits per second used by a digital music file.
. The playback order is the order in which the files were written by the writing software, so the files might not play in the desired order. . Music playback order of compressed audio files is as illustrated.
4-56 Monitor, climate, audio, phone and voice recognition systems Specification chart: Supported media CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB2.0 Supported file systems CD, CD-R, CD-RW, DVD-ROM, DVD±R, DVD±RW, DVD±R DL: ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not support ed.
T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the disc or USB device was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the player.
4-58 Monitor, climate, audio, phone and voice recognition systems Compressed Video Files Explanation of terms: . DivX ® - DivX ® refers to the DivX ® codec owned by DivX, Inc. used for a lossy compression of video based on MPEG- 4. . AVI - AVI stands for Audio Video Interleave.
how to operate an audio device before using it with this system. . The Bluetooth streaming audio may be stopped under the following condi- tions: — Receiving a hands-free call.
4-60 Monitor, climate, audio, phone and voice recognition systems JVH0254X 1. ON·OFF/VOLUME control knob 2. DISC·AUX button 3. FM·AM band select button 4. XM band select button 5. SCAN button 6. SEEK·CA T/TRACK button 7. RDM (random)·RPT (repeat) play but- ton 8.
Audio main operation Head unit: The auto loudness circuit enhances the low and high frequency ranges automatically in both radio reception and CD playback.
4-62 Monitor, climate, audio, phone and voice recognition systems SEEK tuning: . For AM and FM radio Push the SEEK·CA T or TRACK button or to tune from low to high or high to low frequencies and to stop at the next broadcasting station.
Selecting a category will go to the first channel in that category as defined by SiriusXM Satellite Radio. . Direct Tune Inputs the channel number by using a keypad. Compact Disc (CD) player operation Push the ignition switch to the ACC or ON position and insert the Compact Disc (CD) into the slot with the label side facing up.
4-64 Monitor, climate, audio, phone and voice recognition systems CD EJECT: When the Disc EJECT button is pushed with the CD loaded, the CD will be ejected. When this button is pushed while the CD is being played, the CD will be ejected. If the CD comes out and is not removed, it will be pulled back into the slot to protect it.
when the DISC·AUX button located on the instrument panel is pushed while a DVD is being played, and it will turn off auto- matically after a period of time.
4-66 Monitor, climate, audio, phone and voice recognition systems Hide: Hide the operation key. Title Menu (DVD-VIDEO): Some menus specific to each disc will be shown.
Subtitle (DVD-VIDEO , DVD-VR): Select the preferred language for subtitles. Display Mode (DVD- VIDEO, VIDEO-CD, DVD- VR): Select from the “ Full ” , “ Wide ” , “ Normal ” or “ Cinema ” modes. Title List (DVD-VR): Select the preferred title from the list.
4-68 Monitor, climate, audio, phone and voice recognition systems leaning on the USB device and the port. Pressure from the objects may damage the USB device and the port. Playable files Only files that meet the following condi- tions are playable. Music files: .
Next/Previous File and Fast Forward/Rewind: When the or button is pushed for more than 1.5 seconds while a USB memory is being played, the USB memory will play while forwarding or rewinding. When the button is released, the USB memory will return to normal play speed.
4-70 Monitor, climate, audio, phone and voice recognition systems ing to the movie playback mode. . Play Mode Select the preferred play mode. SAA2503 Movie file operation Park the vehicle in a safe location for the front seat occupants to operate the USB memory while watching the images.
back the number of times the “ ” key is selected. List: Select the “ List ” key on the movie file operation screen to display the file list. SAA2504 Example Settings: Select the “ Settings ” key to adjust the following settings. . Audio File Playback Switch to the audio playback mode.
4-72 Monitor, climate, audio, phone and voice recognition systems Bluetooth ® STREAMING AUDIO Y our INFINITI is equipped with Bluetooth ® Streaming Audio. If you have a compatible Bluetooth ® device with streaming audio (A2DP profile), you can set up the wireless connection between your Bluetooth ® de- vice and the in-vehicle audio system.
SAA3159 Connecting procedure 1. Push the SETTING button and select the “ Bluetooth ” ke y. SAA2506 2. Select the “ Connect Bluetooth ” key. SAA2507 3. A confirmation screen will be dis- played. Select “ No ” . Note: Selecting “ Ye s ” will only connect the hands free phone portion of a Bluetooth ® device.
4-74 Monitor, climate, audio, phone and voice recognition systems SAA3005 4. When a passkey appears on the screen, operate the compatible Bluetooth ® audio device to enter the passkey. The pairing procedure of the audio device varies according to eac h audio device.
The INFINITI controller can also be used to select tracks when the Bluetooth ® audio play mode screen is shown on the display. ( “ Bluetooth audio ” will be indicated on the header of the screen.) Play pattern change: T o change the play mode, push the button repeatedly and the mode changes as follows.
4-76 Monitor, climate, audio, phone and voice recognition systems Connect ed Devices: Registered devices are shown on the list. Select a Bluetooth device from the list, the following options will be available. . Select Select “ Select ” to connect the selected device to the vehicle.
* iPod ® is a trademark of Apple Inc., registered in the U.S. and other countries. WARNING Do not connect or disconnect the iPod ® cable while driving. Doing so can be a distraction. If distracted your could lose control of your vehicle and cause an accident or serious injury.
4-78 Monitor, climate, audio, phone and voice recognition systems . Now Playing . Playlists . Artists . Albums . Songs . Podcasts . Genres . Composers . Audiobooks . Shuffle Songs The following touch-panel buttons shown on the screen are also available: .
. White - left channel audio input . Red - right channel audio input Before connecting a device to a jack, turn off the power of the por table device. With a compatible device connected to the jacks, push the DISC·AUX button repeat- edly until the display switches to the AUX mode.
4-80 Monitor, climate, audio, phone and voice recognition systems SAA2496 AUX Menu When the “ Menu ” key on the display is selected while in the AUX mode, the menu screen will be displayed. Display Mode: Choose the display mode from the follow- ing items.
trial use. . A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated. USB memory . Do not touch the terminal portion of the USB memory. . Do not place heavy objects on the USB memory.
4-82 Monitor, climate, audio, phone and voice recognition systems . Pushing the menu control switch will show the iPod Menu. CD: . Tilting up/down for less than 1.5 seconds will increase or decrease the track number. . Tilting up/down for more than 1.
If your vehicle is equipped with the Dual Head Restraint DVD System, you can enjoy playing video files via a DVD, CD or USB memory that provides images and sound both from the front and rear display screens. Y ou can also enjoy compatible auxiliary devices such as video games, camcorders or port able video players through the auxiliary jacks.
4-84 Monitor, climate, audio, phone and voice recognition systems SAA3329 The rear displays are located on the back of the front head restraints. Use the remote controller to operate the rear display screen.
T o display the AUX screen, select the left or right rear display using the rear display select switch on the remote controller, and select the AUX mode after pushing the SOURCE button on the remote controller. The AUX screen cannot be displayed on the front screen.
4-86 Monitor, climate, audio, phone and voice recognition systems headphones. It is also possible that the headphones may be too far from the transmitter which is in the rear display screen. This is not a malfunction. The sound may also be interrupted tem- porarily when there is an obstacle between the headphones and the transmitter.
JVH0238X T ype A Monitor, climate, audio, phone and voice recognition systems 4-87 I n f o r m a t i o n P r o v i d e d b y :.
4-88 Monitor, climate, audio, phone and voice recognition systems JVH0406X T ype B Remote controller 1. POWER button 2. SOURCE button 3. Select button ( , , or ) 4. BACK button 5. Keypad 6. V olume control button ( or ) 7. Rear display select switch 8.
JVH0239X T ype A JVH0407X T ype B Activating rear display: Select the left or right rear display using the rear display select switch on the remote controller and push the Power button to activate the corresponding rear display. JVH0362X When the rear display is on, the icon * 1 will be displayed.
4-90 Monitor, climate, audio, phone and voice recognition systems JVH0246X SAA3081 Remote controller and headphones battery replacement CAUTION . An improperly disposed battery can harm the environment. Always confirm local regulations for battery disposal.
3. Close the lid securely. . If you will not be using the remote controller for long periods of time, remove the batteries. . Replacement of the batteries is needed when the remote controller only functions at extremely close distances to the Dual Head Restraint DVD System or when it does not function at all.
4-92 Monitor, climate, audio, phone and voice recognition systems Front display: . Radio . CD/DVD . USB memory/iPod ® . Bluetooth ® audio . AUX (front) Rear display: .
If you perform an operation with the remote controller, a symbol will be dis- played on the lower left part of the rear seat screens indicating the function per- formed. This symbol will automatically turn off if no remote controller operation is performed for a specified period of time.
4-94 Monitor, climate, audio, phone and voice recognition systems SAA2498 Front screen JVH0361X Rear display Setting menu Select the “ Settings ” key on the display with the INFINITI controller and push the ENTER button to adjust the following settings.
angle. Menu Skip (DVD-VIDEO): DVD menus are automatically configured and the contents will be played directly when the “ Menu Skip ” key is turned on. Note that some discs may not be played directly even if this item is turned on. CM Skip (DVD-VIDEO): The amount of seconds for CM Skip can be set to 15, 30 or 60 seconds.
4-96 Monitor, climate, audio, phone and voice recognition systems screen. ENTER button: Push the ENTER button to confirm the setting for the selected item. SETUP button: Push the SETUP button to display the rear seat display settings. (See “ Rear display settings ” later in this section.
AUX Volume Setting: This is only active when in the Rear AUX mode. To set the AUX volume, select from “ HIGH ” , “ LO W ” or “ MIDDLE ” . OPERA TING TIPS . The images from a device that is connected to the rear auxiliary input jacks cannot be viewed on the front displays.
4-98 Monitor, climate, audio, phone and voice recognition systems When installing a car phone or a CB radio in your vehicle, be sure to observe the following cautions, otherwise the new equipment may adversely affect the elec- tronic control modules and electronic con- trol system harness.
Once a cellular phone is connected to the in-vehicle phone module, no phone con- necting procedure is required anymore. Y our phone is automatically connected with the in-vehicle phone module when the ignition switch is pushed to the ON position with the registered cellular phone turned on and carried in the vehicle.
4-100 Monitor, climate, audio, phone and voice recognition systems . Keep the interior of the vehicle as quiet as possible to hear the caller ’ s voice clearly as well as to minimize its echoes. . If reception between callers is unclear, adjusting the incoming or outgoing call volume may improve the clarity.
JVH0473X C ONNECTING PROCEDURE 1. Push the button, and select the “ Connect Phone ” key. SAA2520 2. When a PIN code appears on the screen, operate the compatible Blue- tooth ® cellular phone to enter the PIN code. The connecting procedure of the cellu- lar phone varies according to each cellular phone.
4-102 Monitor, climate, audio, phone and voice recognition systems JVH0474X 1. Push the button and select the “ Quick Dial ” key. 2. Select the “ Add New ” key at the top of the screen. JVH0475X 3. Choose the method for entering the phonebook entry.
options instead of “ Enter Number by Ke y- pad ” in step 3. . Copy from Call History The system will show a list of incoming, outgoing or missed calls that were downloaded from the connected cellu- lar phone (depending on the phone ’ s compatibility).
4-104 Monitor, climate, audio, phone and voice recognition systems tags allow easy dialing using the INFINITI V oice Recognition system. (See “ INFINITI Voice Recognition sys- tem ” later in this section.) T o delete an entry, select the “ Delete ” key at step 3.
. Dial Number Input the phone number manually using the keypad displayed on the screen. (See “ How to use touch screen ” earlier in this section.) SAA2525 RECEIVING A CALL When you hear a phone ring, the display will change to the incoming call mode.
4-106 Monitor, climate, audio, phone and voice recognition systems SAA3587 DURING A CALL There are some options available during a call. Select one of the following displayed on the screen if necessary. . Hang up Finish the call. . Use Handset T ransfer the call to the cellular phone.
Download Phonebook Download the contacts registered in a Bluetooth ® cellular phone. Availability of this function depends on each cellular phone. The memory downloading proce- dure from the cellular phone also varies according to each cellular phone.
4-108 Monitor, climate, audio, phone and voice recognition systems TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, tr y the following solutions. Where the solutions are listed by number, try each solution in turn, starti ng with number 1, until the problem is resolved.
INFINITI Voice Recognition allows hands- free operation of the Phone, Navigation, Information and Audio systems in one of two modes, Standard Mode or Alternate Command Mode. In Standard Mode, commands that are available are always shown on the display and announced by the system.
4-110 Monitor, climate, audio, phone and voice recognition systems SAA2530 4. Select the “ Alternate Command Mode ” key . 5. The indicator turns off and the Stan- dard Mode activates.
SAA2532 Getting Started Before using the INFINITI Voice Recognition system for the first time, you can confirm how to use commands by viewing the Getting Start ed section of the User Guide. 1. Select the “ Getting Star ted ” key. 2. Y ou can confirm the page by scrolling the screen using the INFINITI controller.
4-112 Monitor, climate, audio, phone and voice recognition systems SAA2533 Useful tips for correct operation Y ou can display useful speaking tips to help the system recognize your voice commands correctly. Select “ Help on Speaking ” to start display.
SAA3164 Giving voice commands 1. Push the TALK switc h located on the steering wheel. SAA2535 2. A list of commands appears on the screen, and the system announces, “ Would you like to access Phone, Navigation, Information, Audio or Help? ” . 3. After the tone sounds and the icon on the screen changes from to , speak a command.
4-114 Monitor, climate, audio, phone and voice recognition systems steering switch or use the audio system volume knob while the system is making an announcement. How to speak numbers: INFINITI V oice Recognition requires a cer- tain way to speak numbers when giving voice commands.
Command List Category Command: Command Action Phone Operates the Phone function Navigation Operates the Navigation function Information Displays the vehicle Information function Audio Operates the Audio function.
4-116 Monitor, climate, audio, phone and voice recognition systems Phone Command: Command Action Dial Number Makes a call to a spoken phone number up to 10 digits. Quick Dial Makes a call to a contact that is stored in the Quick Dial. Phonebook Makes a call to a contact that is stored in the mobile phone.
Navigation Command: Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current vehicle location.
4-118 Monitor, climate, audio, phone and voice recognition systems Information Command: Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Traffic Information Turns the traffic information system ON and OFF .
Audio Command: Command Action AM Turns to the AM band, selecting the station last played. FM Turns to the FM band, selecting the station last played. XM Turns to the SiriusXM Satellite Radio band, selecting the channel last played. CD Starts to play a CD.
4-120 Monitor, climate, audio, phone and voice recognition systems General Commands: Command Action Go back Corrects the last recognition result to return to the previous screen Exit Cancels Voice Rec.
V oice command examples T o use the INFINITI Voice Recognition function, speaking one command is some- times sufficient, but at other times it is necessary to speak two or more com- mands. As examples, some additional basic operations by voice commands are described here.
4-122 Monitor, climate, audio, phone and voice recognition systems JVH0481X 4. Speak “ Dial Number ” . SAA2537 5. Speak “ 800 ” . Selecting the “ Manual Controls ” ke y switches the screen to the keypad to input the phone number manually. SAA2538 6.
SAA2539 8. The system announces, “ Please say the last four digits ” or say change number. 9. Speak “ 6200 ” . SAA2540 10. The system announces, “ Dial or Change Number? ” 11. Speak “ Dial ” . 12. The system makes a call to 800-662- 6200.
4-124 Monitor, climate, audio, phone and voice recognition systems SAA3164 Example 2 - Placing an international call to the phone number 011-81-111-222-3333: 1. Push the TALK switch located on the steering wheel. SAA2535 2. The system announces, “ Would you like to access Phone, Navigation, Informa- tion, Audio or Help? ” 3.
SAA2541 5. Speak “ 011811112223333 ” . SAA2542 6. Speak “ Dial ” . 7. System makes a call to 011-81-111- 222-3333. Note: Any digit input format is available in the International Number input process. INFINITI VOICE RECOGNITION AL - TERNA TE C OMMAND MODE The following section is applicable when Alternate Command Mode is activated.
4-126 Monitor, climate, audio, phone and voice recognition systems SAA2529 Activating Alternate C ommand Mode When the Standard Mode is active, perform the following steps to switch to the Alternate Command Mode. 1. Push the SETTING button on the instru- ment panel.
SAA2545 5. Select a category from the list. JVH0483X 6. Select an item. 7. If necessary , scroll the screen using the INFINITI controller to view the entire list.
4-128 Monitor, climate, audio, phone and voice recognition systems Command list Phone Commands: Command Action Dial Number Makes a call to a spoken phone number. Quick Dial Makes a call to a contact that is stored in the Quick Dial. Phonebook Makes a call to a contact that is stored in the mobile phone.
Navigation Commands: Command Action Destination Home Sets a route to your home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route to the location. Places Sets a route to a facility near the current vehicle location.
4-130 Monitor, climate, audio, phone and voice recognition systems Information Commands: Command Action Fuel Economy Displays fuel economy information. Maintenance Displays maintenance information. Tire Pressure Displays tire pressure information Where am I? Displays your current location.
Audio Commands: Command Action CD Starts to play a CD. FM Turns to the FM band, selecting the station last played. AM Turns to the AM band, selecting the station last played. XM Turns to the SiriusXM Satellite Radio band, selecting the station last played.
4-132 Monitor, climate, audio, phone and voice recognition systems Help Commands: Command Action Command List Navigation Commands Displays the navigation command list. Phone Commands Displays the phone command list. Audio Commands Displays the audio command list.
General Commands: Command Action Go back Corrects the last recognition result to return to the previous screen Exit Cancels Voice Recognition Monitor, climate, audio, phone and voice recognition syste.
4-134 Monitor, climate, audio, phone and voice recognition systems SAA2547 Displaying user guide Y ou can confirm how to use voice com- mands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands.
. When the air conditioner is in the “ AUTO ” mode, the fan speed decreases automatically for easy recognition. . Wait until a tone sounds before speak- ing a command. . Speak in a natural voice without paus- ing between words. SAA3164 Giving voice command 1.
4-136 Monitor, climate, audio, phone and voice recognition systems Repeat the command in a clear voice. . Push the BACK button once to return to the previous screen. . If you want to cancel the command, push and hold the TALK switch for 1 second. The message “ Voice can- celed ” will be announced.
SAA2549 Speaker adaptation function (for Alternate C ommand Mode) The voice recognition system has a func- tion to learn the user ’ s voice for better voice recognition performance. The system can memorize the voices of up to three persons. Having the system learn the user ’ s voice: 1.
4-138 Monitor, climate, audio, phone and voice recognition systems SAA2552 8. The system requests that you repeat a command after a tone. 9. After the tone sounds and the icon on the screen changes from to , speak the command that the system requested.
Minimize voice feedback (for Alter- nate C ommand Mode) T o minimize the voice feedback from the system, perform the following steps. 1. Push the SETTING button on the instru- ment panel. 2. Select the “ Others ” key. 3. Select the “ V oice Recognition ” key.
4-140 Monitor, climate, audio, phone and voice recognition systems TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error.
5 Star ting and driving Precautions when starting and driving ................. 5-3 Exhaust gas (carbon monoxide) ....................... 5-3 Three-way catalyst ........................................... 5-3 Tire Pressure Monitoring System (TPMS)....
Precautions on vehicle-to-vehicle distance control mode ................................................. 5-58 V ehicle-to-vehicle distance control mode operation ............................................. 5-59 Conventional (fixed speed) cruise control mode .
WARNING . Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either.
5-4 Starting and driving cause a fire. CAUTION . Do not use leaded gasoline. Deposits from leaded gasoline seriously reduce the three-way catalyst ’ s ability to help reduce exhaust pollutants.
Additional information . The TPMS does not monitor the tire pressure of the spare tire. . The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example, a flat tire while driving).
5-6 Starting and driving a flat tire.) . When a spare tire is mounted or a wheel is replaced, the TPMS will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. C ontact your INFINITI retailer as soon as possible for tire replacement and/or system resetting.
Operation: 1. Add air to the tire. 2. After a few seconds, the hazard indica- tors will start flashing. 3 . When the designated pressure is reached, the horn beeps once and the hazard indicators stop flashing. 4. Perform the above steps for each tire.
5-8 Starting and driving ON-P AVEMENT AND OFF-ROAD DRIVING PRECAUTIONS Utility vehicles have a significantly higher rollover rate than other types of vehicles. They have higher ground clearance than passenger cars to make them capable of performing in a variety of on-pavement and off-road applications.
tions of the vehicle, road and traffic. WARNING The following actions can increase the chanc e of losing control of the vehicle if there is a sudden loss of tire air pressure. Losing control of the vehicle may cause a collision and result in personal injury.
5-10 Starting and driving WARNING . Drive carefully when off the road and avoid dangerous areas. Every person who drives or rides in this vehicle should be seated with their seat belt fastened. This will keep you and your passengers in position when driving over rough terrain.
states for emissions testing), or similar equipment even if the other two wheels are raised off the ground. Make sure you inform test facility personnel that your vehicle is equipped with 4WD before it is placed on a dynamometer.
5-12 Starting and driving SSD0436 OPERA TING RANGE FOR ENGINE ST ART FUNCTION The operating range for starting the engine inside the vehicle * 1 is shown in the illustration.
PUSH-BUTTON IGNITION SWITCH POSITIONS L OCK (Normal parking position) The ignition switc h can only be locked in this position. The ignition switch will be unlocked when it is pushed to the AC C position while carrying the Intelligent Key.
5-14 Starting and driving 4. Push the ignition switch while depres- sing the brake pedal within 10 seconds after the chime sounds. The engine will start. After step 3 is performed, when the ignition switc h is pushed without depres- sing the brake pedal, the ignition switch position will change to ACC.
cranking the engine, release the accelerator pedal. Crank the engine with your foot off the accelerator pedal by depressing the brake pedal and pushing the push-button igni- tion switch to start the engine. If the engine starts, but fails to run, repeat the above procedure.
5-16 Starting and driving ENGINE PRO TECTION MODE The engine has an engine protection mode to reduce the chance of damage if the coolant temperature becomes too high (for example, when climbing steep grades in high temperature with heavy loads, such as when towing a trailer).
AUTOMA TIC TRANSMISSION 7 speed automatic transmission The automatic transmission in your vehicle is electronically controlled by a transmis- sion control module to produce maximum efficiency and smooth operation. Shown on the following pages are the recommended operating procedures for this transmission.
5-18 Starting and driving SSD0945 Shift lever T o move the shift lever, : Push the button while depressing the brake pedal, : Push the button, : Just move the shift lever. Shifting The shift lever position indicator light (next to the shift lever) will be illuminated for approximately 30 minutes after the ignition switch is turned off.
D (Drive): Use this position for all normal forward driving. Manual shift mode When the shift lever is in the manual shift gate, the transmission is ready for the manual shift mode. Shift ranges can be selected manually by moving the shift lever up or down.
5-20 Starting and driving If the vehicle is driven under extreme conditions, such as excessive wheel spin- ning and subsequent hard braking, the fail-safe system may be activated. This will occur even if all electrical circuits are functioning properly .
WARNING . Be sure the parking brake is fully released before driving. Failure to do so can cause brake failure and lead to an accident. . Do not release the parking brake from outside the vehicle. . Do not use the gear shift in place of the parking brake.
5-22 Starting and driving SSD1045 SSD0672 Lane departure warning light (orange) The LDW and LDP systems monitor the lane markers on the traveling lane using the camera unit * 1 located inside the front map light cover.
have the system chec ked by an INFINITI retailer. . Excessive noise will interfere with the warning chime sound, and the chime may not be heard. The system may not function properly under the following conditions: .
5-24 Starting and driving . When you operate the lane change signal and change traveling lanes in the direction of the signal. (The LDW system will become operable again approximately 2 seconds after the lane change signal is turned off.) . When the vehicle speed lowers to less than approximately 45 MPH (70 km/h).
SSD0939 SSD1102 How to enable/disable the LDW system using the settings menu Perform the following steps to enable or disable the LDW system. 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the INFINITI controller.
5-26 Starting and driving warning light (orange) will stop flashing. LANE DEP ARTURE PREVENTION (LDP) SYSTEM Precautions on LDP system WARNING . The LDP system will not steer the vehicle or prevent loss of control.
. On roads where there are multiple parallel lane markers; lane markers that are faded or not painted clearly; yellow painted lane markers; non-stan- dard lane markers; or lane markers covered with water, dirt, snow, etc. . On roads where discontinued lane markers are still detectable.
5-28 Starting and driving the vehicle to the center of the traveling lane. The warning and assist functions will stop when the vehicle returns to a position inside of the lane marker.
How to enable/disable the LDP system using the settings menu Perform the following steps to enable or disable the LDP system. 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the INFINITI controller.
5-30 Starting and driving . When the Intelligent Cruise Control (ICC) approach warning occurs. . When the hazard warning flashers are operated. . When driving on a curve at high speed. After the above conditions have finished and the necessary operating conditions are satisfied, the LDP brake control assist function will resume.
sunlight may adversely affect the cam- era unit ’ s capability of detecting the lane markers. . Do not strike or damage the areas around the camera unit. Do not touch the camera lens or remove the screw located on the camera unit. If the camera unit is damaged due to an accident, contact an INFINITI retailer.
5-32 Starting and driving SSD1030 Detection zone The radar sensors can detect vehicles on either side of your vehicle within the detection zone shown as illustrated. This detection zone starts from the outside mirror of your vehicle and extends approxi- mately 10 ft (3 m) behind the rear bumper, and approximately 10 ft (3 m) sideways.
SSD1086 Blind spot warning indicator light BSW SYSTEM OPERA TION If the radar sensors detect vehicles in the detection zone, the Blind spot warning indicator light located inside the outside mirrors illuminates. If the turn signal is then activated, the Blind spot warning indicator light flashes and a chime sounds twice.
5-34 Starting and driving For the LDW and FCW systems, see “ Lane Departure Warning (LDW)/Prevention (LDP) system ” earlier in this section and “ Forward Collision Warning (FCW) system ” later in this section.
JVS0080X 3. Highlight the “ Blind Spot Warning ” key, select ON (enabled) or OFF (disabled) and push the ENTER * 2 button. SSD1086 Blind spot warning indicator light SSD1029 Blind Spot Interventio.
5-36 Starting and driving SSD0957 Dynamic driver assistance switch BLIND SPOT INTERVENTION TM SYS- TEM OPERA TION If the radar sensors detect vehicles in the detection zone, the Blind spot warning indicator light located inside the outside mirrors illuminates.
SSD0959 SSD1102 How to enable/disable the Blind Spot Intervention TM system using the setting menu Perform the following steps to enable or disable the Blind Spot Intervention TM system. 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the INFINITI controller.
5-38 Starting and driving Precautions on BSW/Blind Spot Intervention TM system WARNING . Do not use the Blind Spot Intervention TM system under the following conditions because the system may not function properly. — During bad weather (for example, rain, fog, snow, wind, etc.
and parked vehicles may occasionally be detected. This is a normal operating condition. . The camera may not detect lane markers in the following situations and the Blind Spot Intervention TM system may not operate properly.
5-40 Starting and driving to change lanes. SSD1031 If the driver activates the turn signal, then the Blind spot warning indicator light flashes and a chime will sound twice.
SSD1032 NOTE: If you accelerate from a stop with a vehicle in the detection zone, the other vehicle may not be detected. SSD1033 Overtaking other vehicles The Blind spot warning indicator light illuminates if you overtake a vehicle and that vehicle stays in the detection zone for approximately 3 seconds.
5-42 Starting and driving SSD1093 If the Blind Spot Intervention TM system is on and your vehicle approaches a lane marker while another vehicle is in the detection zone, the Blind spot warning indicator light flashes and a chime will sound three times.
SSD1037 Entering from the side The Blind spot warning indicator light illuminates if a vehicle enters the detection zone from either side. NOTE: The radar sensors may not detect a vehicle which is traveling at about the same speed as your vehicle when it enters the detec- tion zone.
5-44 Starting and driving SSD1040 NOTE: . The Blind Spot Intervention TM system will not operate if your vehicle is on a lane marker when another vehicle enters the detection zone.
remove objects obscuring the radar sen- sors on the rear bumper, and restart the engine. If the warning light (orange) continues to blink, have the BSW/Blind Spot Interv en- tion TM systems checked by an INFINITI retailer.
5-46 Starting and driving JVS0169X The BCI system uses radar sensors * 1 installed on both sides near the rear bumper to detect an approaching vehicles and sonar sensors * 2 to detect objects in the rear. The radar sensors * 1 detect the approach- ing vehicle from up to approximately 49 ft (15 m) away.
JVS0197X BCI ON indicator BCI SYSTEM OPERA TION (if so equipped) When the shift lever is placed in the R (Reverse) position, the BCI ON indicator appears in the vehicle information display.
5-48 Starting and driving JVS0172X JVS0173X NOTE: . In the case of several vehicles ap- proac hing in a row or from the opposite direction, a chime may not be output to the BCI system after the first vehicle passes the sensors. . When the parking sensor of the Around View Monitor sounds a tone, the BCI system does not chime a sound (single beep).
JVS0174X BCI switch JVS0182X BCI OFF indicator The BCI system is turned off temporarily by pushing the BCI switch. The BCI OFF indicator appears on the vehicle informa- tion display. When the shift lever is placed in the R (Reverse) position again, the BCI system is turned on.
5-50 Starting and driving Perform the following steps to enable or disable the BCI system. 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the INFINITI controller. Then push the ENTER * 2 button. JVS0198X 2.
JVS0170X Precautions on BCI system WARNING . When the radar sensors may not be able to detect certain objects such as: — Pedestrians, bicycles or animals — A vehicle that passing at speeds greater than approximate ly 15 MPH (24 km/h) . The radar sensors may not detect approac hing vehicles in certain situa- tions.
5-52 Starting and driving . The brake engagement by the BCI system is not as effective on a slope as it is on flat ground. When on a steep slope the system may not function properly. . Do not use the BCI systems under the following conditions because the system may not function properly.
JVS0184X BCI malfunction When the BCI system malfunctions, it will be turned off automatically, a beep will sound and “ BCI MALFUNCTION ” warning will appear in the vehicle information display. Stop the vehicle in a safe location, turn the engine off and restart the engine.
5-54 Starting and driving unauthorized modifications to this equip- ment. Such modifications could void the user ’ s authority to operate the equipment. PRECAUTIONS ON CRUISE CONTROL . If the cruise control system malfunc- tions, it will cancel automatically.
JVS0090X 1. AC CELERA TE/RESUME switch 2. COAST/SET switch 3. CANCEL switch 4. Cruise control MAIN switch CRUISE CONTROL OPERA TIONS The cruise control allows driving at a speed between 25 to 90 MPH (40 to 144 km/h) without keeping your foot on the accel- erator pedal.
5-56 Starting and driving (1.6 km/h). T o resume the preset speed, push and release the ACCELERA TE/RESUME switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 25 MPH (40 km/h).
SSD1051 1 . V ehicle-to-vehicle distance control mode 2. Conventional (fixed speed) cruise con- trol mode Push the MAIN switch * A to choose the cruise control mode between the vehicle- to-vehicle distance control mode * 1 and the conventional (fixed speed) cruise con- trol mode * 2 .
5-58 Starting and driving JVS0227X PRECAUTIONS ON VEHICLE-TO- VE- HICLE DIST ANCE CONTROL MODE The system is intended to enhance the operation of the vehicle when following a vehicle traveling in the same lane and direction.
under the following conditions. T o avoid accidents, never use the IC C system under the following conditions: — On roads where the traffic is heavy or there are sharp cur ves — On slippery road surfaces such as on ice or snow, etc. — On off-road surfaces such as on sand or rock, etc.
5-60 Starting and driving traveling ahead. The sensor generally detects the signals returned from the reflectors on a vehicle ahead. Therefore, if the sensor cannot detect the reflector on the vehicle ahead, the ICC system may not maintain the selected distance.
in the limitations of the system. The system will cancel once it judges that the vehicle has come to a standstill with a warning chime. . When the vehicle traveling ahead has moved out from its lane of travel, the vehicle-to-vehicle distance control mode accelerates and maintains vehi- cle speed up to the set speed.
5-62 Starting and driving SSD0253 When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the IC C sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead.
SSD0964 Intelligent Cruise Control (IC C) sys- tem switc h The system is operated by a MAIN switch and four control switches, all mounted on the steering wheel. 1. ACCELERA TE/RESUME switch: Resumes set speed or increases speed incrementally. 2. COAST/SET switch: Sets desired cruise speed, reduces speed incrementally.
5-64 Starting and driving 4. Indicates your vehicle 5. Set vehicle speed indicator: Indicates the set vehicle speed. For Canadian models, the speed is displayed in km/h. 6. Intelligent Cruise Control (ICC) system warning light (orange): The light comes on if there is a malfunction in the ICC system.
SSD1053 T o set cruising speed, accelerate your vehicle to the desired speed, push the COAST/SET switch and release it. (Vehicle ahead detection indicator, set distance indicator and set vehicle speed indicator come on.) T ake your foot off the accelerator pedal.
5-66 Starting and driving SSD1106 When the COAST/SET switch is pushed under the following conditions, the system cannot be set. A warning chime will sound and the set vehicle speed indicator will blink.
SSD1107 1. System set display with vehicle ahead 2. System set display without vehicle ahead System operation WARNING Normally when controlling the distance to a vehicle ahead, this system automatically accelerates or decelerates your vehicle according to the speed of the vehicle ahead.
5-68 Starting and driving If a vehicle ahead appears during accel- eration to the set vehicle speed or any time the ICC system is in operation, the system controls the distance to that vehicle. When a vehicle is no longer detected under approximately 15 MPH (24 km/h), the system will be cancelled.
approximately 5 MPH or 5 km/h. . Push, then quic kly release the C OAST/ SET switch. Each time you do this, the set speed will decrease by approxi- mately 1 MPH or 1 km/h. T o resume the preset speed, push and release the ACCELERA TE/RESUME switch. The vehicle will resume the last set cruising speed when the vehicle speed is over 20 MPH (32 km/h).
5-70 Starting and driving SSD1109 . The distance to the vehicle ahead will change according to the vehicle speed. The higher the vehicle speed, the longer the distance. . If the engine is stopped, the set distance becomes “ long ” . (Each time the engine is started, the initial setting becomes “ long ” .
SSD0284A NOTE: The approach warning chime may sound and the system display may blink when the ICC sensor detects some reflectors * A which are fitted on vehicles in other lanes or on the side of the road. This may cause the ICC system to decelerate or accelerate the vehicle.
5-72 Starting and driving SSD1110 Warning light and display Condition A: The chime sounds and the Intelligent Cruise Control (ICC) system is canceled automatically in the conditions described below. Part of the system display will come on or blink, making it impossible to set.
SSD0979 Condition C: When the ICC system is not operating properly, the chime sounds and the system warning light (orange) will come on. Action to take: If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine, resume driving and set the ICC system again.
5-74 Starting and driving maged due to an accident, co ntact an INFINITI retailer. . Do not attach a sticker (including transparent material) or install an accessory near the sensor.
SSD1013 Conventional (fixed speed) cruise control mode display and indica- tors The display is on the dot matrix liquid crystal display (in the vehicle information display) located between the speedometer and tachometer. 1. MAIN switch indicator: Indicates that the MAIN switch is ON.
5-76 Starting and driving desired cruising speed. Pushing the MAIN switch again will turn the system comple- tely off. When the Distance Control Assist (DCA) system is on, the conventional (fixed speed) cruise control mode cannot be turned on even though the MAIN switch is pushed and held.
2. Push and hold the C OAST/SET switch. Release the switch when the vehicle slows down to the desired speed. 3. Push, then quickly release the COAST/ SET switch. Each time you do this, the set speed will decrease by about 1 MPH (1.6 km/h). T o resume the preset speed, push and release the ACCELERA TE/RESUME switch.
5-78 Starting and driving The Distance Control Assist (DCA) system brakes and moves the accelerator pedal upward according to the distance from and the relative speed of the vehicle ahead to help assist the driver to maintain a following distance. WARNING .
The detection range of the sensor is approximately 390 ft (120 m) ahead. WARNING . This system is only an aid to assist the driver and is not a collision warning or avoidance device. It is the driver ’ s responsibility to stay alert, drive safely and be in control of the vehicle at all times.
5-80 Starting and driving JVS0227X DIST ANCE C ONTROL ASSIST OP- ERA TION Always pay attention to the operation of the vehicle and be ready to manually decelerate to maintain the proper following distance. The Distance Control Assist (DCA) system may not be able to dec elerate the vehicle under some circumstances.
The DCA system does not control vehicle speed or warn you when you approach stationary and slow moving vehicles. Y ou must pay attention to vehicle operation to maintain proper distance from vehicles ahead. SSD0252 The detection zone of the sensor is limited.
5-82 Starting and driving SSD0253 When driving on some roads, such as winding, hilly, curved, narrow roads, or roads which are under construction, the sensor may detect vehicles in a different lane, or may temporarily not detect a vehicle traveling ahead.
The light comes on if there is a malfunction in the DCA system. SSD1049 Operating Distance Control Assist (DCA) system The DCA system turns on when the dynamic driver assistance switch on the steering wheel is pushed when “ Distance Control Assist ” is enabled in the settings menu in the center display.
5-84 Starting and driving SSD0959 SSD1102 How to enable/disable the DCA system using the settings menu: Perform the following steps to enable or disable the DCA system. 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the multi-function con- troller.
SSD0996 Under the following conditions, the Dis- tance Control Assist system will not oper- ate and the Distance Control Assist (DCA) system switch indicator will blink: . When the SNOW mode is pushed (SNOW mode switch) (T o use the DCA system, turn off the SNOW mode switch, then turn on the dynamic driver assistance switch.
5-86 Starting and driving SSD0997 1. System set display with vehicle ahead 2. System set display without vehicle ahead System operation WARNING The Distance Control Assist system auto- matically decelerates your vehicle to help assist the driver to maintain a following distance from the vehicle ahead.
WARNING . When the vehicle ahead detection in- dicator is not illuminated, system will not control or warn the driver. . Depending on the position of the accel- erator pedal, the system may not be able to assist the driver to release the accelerator pedal appropriately.
5-88 Starting and driving SSD0284A NOTE: The approach warning chime may sound and the system display may blink when the sensor detects some reflectors * A which are fitted on vehicles in other lanes or on the side of the road. This may cause the DCA system to operate inappropriately.
. When the 4WD shift switch is in the 4H or 4L position (for 4WD models) . When driving into a strong light (for example, sunlight) Action to take: When the conditions listed above are no longer present, turn the system off with the dynamic driver assistance switch.
5-90 Starting and driving conditions, have the vehicle checked at an INFINITI retailer. Sensor maintenance How to handle the sensor: The sensor for the DCA system is common with Intelligent Cruise Control and is located below the front bumper. T o handle the sensor, see “ Intelligent Cruise Control (ICC) system ” earlier in this section.
The FCW system uses the distance sensor * A located below the front bumper to measure the distance to the vehicle ahead. When the system judges that your vehicle is getting close to the vehicle ahead in the travel lane, the vehicle ahead detection indicator blinks and a warning chime sounds.
5-92 Starting and driving provide unnecessary warning. . The system may not function in offset conditions. . The system may not function when the distance to the vehicle ahead is extre- mely close. . The system is designed to automatically chec k the sensor ’ s functionality.
SSD0956 FCW system operation The warning systems switch is used to turn on and off the FCW system when it is activated using the settings menu on the center display. See “ How to enable/disable the FCW system using the settings menu ” later in this section.
5-94 Starting and driving How to enable/disable the FCW system using the settings menu Perform the following steps to enable or disable the FCW system. 1. Push the SETTING * 1 button and high- light the “ Driver Assistance ” key on the display using the INFINITI controller.
JVS0227X SSD0749 V ehicle ahead detection indicator The IBA system uses a distance sensor * A located below the front bumper to measure the distance to the vehicle ahead.
5-96 Starting and driving — When the reflectors of the vehicle ahead are covered with dirt, snow or road spray. — When visibility is low (such as rain, fog, snow, etc.). — When snow or road spray from traveling vehicles is splashed. — When dense exhaust or other smoke (black smoke) from vehicles reduces the visibility of the sensor.
system may not detect them. In these instances the system may not be able to warn the driver properly . Be sure to chec k and clean the sensor regularly.
5-98 Starting and driving will illuminate. When the IBA OFF switch is pushed again, the system will turn on and the IBA OFF indicator light will turn off. The IBA system will remain in the last ON or OFF state it was left in until it is manually changed by pressing the IBA OFF switch.
namic drag. . Recirculating the cool air in the cabin when the A/C is on reduces cooling load. 4. Drive at economical speeds and dis- tances. . Observing the speed limit and not exceeding 60 MPH (97 km/h) (where legally allowed) can improve fuel efficiency due to reduced aerody- namic drag.
5-100 Starting and driving . Keep your engine tuned up. . Follow the recommended scheduled maintenance. . Keep the tires inflated to the correct pressure. Low tire pressure increases tire wear and lowers fuel economy. . Keep the wheels in correct alignment.
INFINITI ALL -MODE 4WD ® SYSTEM The all mode 4WD system provides 3 positions (AUTO, 4HI and 4LO), so you can select the desired drive mode according to the driving conditions. 4WD shift procedure: SSD1100 *1: The 4LO and 4HI indicator may flash alternately.
5-102 Starting and driving lever has been shifted to the N (Neutral) position. If the indicator keeps flashing after the 4WD shift procedure, drive slowly without abrupt maneuvers for a while. Then the indicator will illuminate or turn off. · Avoid making a turn or abrupt starts while shifting to the 4LO position.
The 4WD shift switch is used to select the 4WD mode depending on the driving conditions. There are 3 types of drive modes available, AUTO, 4HI and 4LO. The 4WD shift switch electronically con- trols the transfer case operation. Rotate the switch to move between each mode, AUTO, 4H and 4L.
5-104 Starting and driving increase the movement. . If the vehicle is stuck deep in mud, tire chains may be effective. CAUTION . Do not spin the tires excessively . Tires will sink deep into the mud, making it difficult to free the vehicle. . Avoid shifting gears with the engine running at high speeds as this may cause malfunction.
. Never shift the 4WD shift switch be- tween 4L and 4H while driving. . Engine idling speed is high while warm- ing up the engine. Be especially careful when starting or driving on slippery surfaces with the 4WD shift switch in AUTO.
5-106 Starting and driving If any malfunction occurs in the 4WD system when the ignition switch is placed in the ON position, the 4WD warning light will either remain illuminated or blink. If the 4WD warning light comes on, the 4WD shift indicator turns off.
WARNING . Never rely solely on the hill start assist system to prevent the vehicle from moving backward on a hill. Always drive carefully and attentively. Depress the brake pedal when the vehicle is stopped on a steep hill. Be especially careful when stopped on a hill on frozen or muddy roads.
5-108 Starting and driving SD1006MA WARNING . Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. . Never leave the engine running while the vehicle is unattended. . Do not leave children unattended inside the vehicle.
SIC4474 The TOW MODE should be used when pulling a heavy trailer or hauling a heavy load. Driving the vehicle in the TOW MODE with no trailer/load or light trailer/light load will not cause any damage. However, fuel economy may be reduced, and the transmission/engine driving characteris- tics may feel unusual.
5-110 Starting and driving WARNING If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. The power assisted steering uses a hy- draulic pump, driven by the engine, to assist steering.
WARNING . While driving on a slippery surface, be careful when braking, accelerating or downshifting. Abrupt braking or accel- erating could cause the wheels to skid and result in an accident. . If the engine is not running or is turned off while driving, the power assist for the brakes will not work.
5-112 Starting and driving SSD0338 . The sensor will not detect: 1) Pedestrians or objects in the road- way 2) Oncoming vehicles in the same lane 3) Motorcycles traveling offset in the travel lane as illustrated WARNING . This system is only an aid to assist braking operation and is not a collision warning or avoidance device.
SSD0471 Warning light and display When the Preview Function is not operating properly, the chime sounds and the system warning light (orange) will come on. Action to take: If the warning light comes on, park the vehicle in a safe place. Turn the engine off, restart the engine and resume driving.
5-114 Starting and driving and loading information label ” in the “ 9. T echnical and consumer informa- tion ” section of this manual. — For detailed information, see “ Wheels and tires ” in the “ 8. Main- tenance and do-it-yourself ” section of this manual.
The V ehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC system helps to perform the following functions. . Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is transferred to a non slipping drive wheel on the same axle.
5-116 Starting and driving surfaces and always drive carefully . . Do not modify the vehicle ’ s suspension. If suspension parts such as shock absorbers, struts, springs, stabilizer bars, bushings and wheels are not INFINITI recommended for your vehicle or are extremely deteriorated, the VDC system may not operate properly.
The VDC off indicator light will illuminate. Push the VDC OFF switch again or restart the engine to turn ON the system. FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the Intelligent Key system.
5-118 Starting and driving Skid and traction capabilities of studded snow tires, on wet or dry surfaces, may be poorer than that of non-studded snow tires. Tire c hains may be used. For details, see “ Tire chains ” in the “ 8. Maintenance and do-it-yourself ” section of this manual.
depending on outside temperatures, to properly warm the engine coolant. Use an appropriate timer to turn the engine block heater on. 6. Before starting the engine, unplug and properly store the cord to keep it away from moving parts. WARNING . Do not use your engine block heater with an ungrounded electrical system or a 2- pronged adapter.
5-120 Starting and driving MEMO I n f o r m a t i o n P r o v i d e d b y :.
6 In case of emergency Hazard warning flasher switch ............................. 6-2 Roadside assistance program .............................. 6-2 Emergency engine shut off .................................. 6-3 Flat tire...........................
6-2 In case of emergency SIC2574 Push the switch on to warn other drivers when you must stop or park under emergency conditions. All turn signal lights will flash. WARNING . If stopping for an emergency, be sure to move the vehicle well off the road. .
T o shut off the engine in an emergency situation while driving, perform the follow- ing procedure: . Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or . Push and hold the push-button ignition switch for more than 2 seconds.
6-4 In case of emergency . Replacing tires with those not originally specified by INFINITI could affect the proper operation of the TPMS. . Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors.
JVE0023X Getting the spare tire and tools 1. Open the lift gate. 2. Raise the cargo floor board using the handle * A . JVE0091X WARNING When removing jacking tools, be sure the rubber sound suppressor * 1 , used to control jack stand from rattling against metal, is not attached to the jacking tool.
6-6 In case of emergency SCE0915 5. Securely screw to connect the T-shaped end of the jack rod and two extension bars * 1 as illustrated. 6. Fit the square end of the jack rod into the square hole of the wheel nut wrench to form a handle * 2 . 7. Locate the oval opening above the middle of the rear bumper.
SCE0377 10. Once the spare wheel is completely lowered, remove the jack rod and reach under the vehicle to remove the hang- ing plate. 11. Carefully slide the spare wheel from under the rear of the vehicle.
6-8 In case of emergency while driving. Lower the wheel on the ground again, and make sure that the hanging plate is properly set. Hang the wheel again and make sure that the wheel is held horizontally, then store the wheel. Jacking up the vehicle and remov- ing the damaged tire WARNING .
SCE0876 2. Loosen each wheel nut one or two turns by turning counterclockwise with the wheel nut wrenc h. Do not remove the wheel nuts until the tire is off the ground. NCE130 3. Install the assembled jack rod into the jack as shown. 4. Carefully raise the vehicle until the clearance between the tire and ground is achieved.
6-10 In case of emergency seconds. T o reset the auto-leveling sus- pension, cycle the ignition switch ON/OFF one time. SCE0910 Installing the spare tire The full-size temporary use only spare tire (if so equipped) is designed for emergency use. (See specific instructions under the heading “ Wheels and tires ” in the “ 8.
is recommended that wheel nuts be tightened to specifications at each lubrication interval. . Adjust tire pressure to the COLD pressure. COLD pressure: After the vehicle has been parked for three hours or more or driven less than 1 mile (1.
6-12 In case of emergency . Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump star ting.
CAUTION . Always connect positive (+) to positive (+) and negative ( − ) to body ground (as illustrated) — not to the battery. . Make sure the jumper cables do not touch moving parts in the engine com- partment and that clamps do not contact any other metal.
6-14 In case of emergency CAUTION . Do not co ntinue to drive if y our vehicle overheats. Doing so could cause engine damage or a vehicle fire. . T o avoid the danger of being scalded, never remove the radiator cap or coolant reservoir cap while the engine is still hot.
When towing your vehicle, all State (Pro- vincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. T owing instructions are available from an INFINITI retailer. Local service operators are familiar with the applicable laws and procedures for towing.
6-16 In case of emergency SCE0925 Two-wheel drive models TOWING REC OMMENDED BY INFINITI Two-Wheel Drive (2WD) models INFINITI recommends that your vehicle be towed with the driving (rear) wheels off the ground or place the vehicle on a flat bed truck as illustrated.
SCE0907 Four-wheel drive models Four-wheel Drive (4WD) models INFINITI recommends that towing dollies be used when towing your vehicle or the vehicle be placed on a flat bed truck as illustrated. CAUTION Never tow 4WD models with any of the wheels on the ground as this may cause serious and expensive damage to the powertrain.
6-18 In case of emergency SCE0921 Front SCE0922 Rear VEHICLE RECOVERY (freeing a stuck vehicle) WARNING . Stand clear of a stuck vehicle. . Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged.
. Shift back and forth between R (Reverse) and D (Drive). . Apply the accelerator as little as possible to maintain the rocking motion. . Release the accelerator pedal before shifting between R and D. . Do not spin the tires above 35 MPH (55 km/h). 5.
6-20 In case of emergency MEMO I n f o r m a t i o n P r o v i d e d b y :.
7 Appearance and car e Cleaning exterior ................................................. 7-2 Washing .......................................................... 7-2 Waxing ............................................................ 7-3 Removing spots .
7-2 Appearance and care In order to maintain the appearance of your vehicle, it is important to take proper care of it. T o protect the paint surface, wash your vehicle as soon as you can: . after a rainfall to prevent possible damage from acid rain .
WAXING Regular waxing protects the paint surface and helps retain new vehicle appearance. Polishing is recommended to remove built- up wax residue and to avoid a weathered appearance before reapplying wax. An INFINITI retailer can assist you in choosing the proper product.
7-4 Appearance and care CAUTION Follow the directions below to avoid stain- ing or discoloring the wheels: . Do not use a cleaner that uses strong acid or alkali contents to clean the wheels. . Do not apply wheel cleaners to the wheels when they are hot.
CAUTION . Never use benzine, thinner, or any similar material. . For cleaning, use a soft cloth, dampened with water. Never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a c hemical cleaning agent. They will scratch or cause discoloration to the lens.
7-6 Appearance and care SAI0038 Front (example) Floor mat positioning aid This model includes front floor mat brack - ets to act as floor mat positioning aid. NISSAN floor mats have been specially designed for your vehicle model. The floor mats have grommet holes in them.
MOST C OMMON FACTORS CONTRI- BUTING TO VEHICLE C ORROSION . The accumulation of moisture-retaining dirt and debris in body panel sections, cavities, and other areas. . Damage to paint and other protective coatings caused by gravel and stone chips or minor traffic accidents.
7-8 Appearance and care MEMO I n f o r m a t i o n P r o v i d e d b y :.
8 Maintenance and do-it-yourself Maintenance requirement .................................... 8-2 Scheduled maintenance .................................. 8-2 General maintenance ....................................... 8-2 Where to go for service ....
8-2 Maintenanc e and do-it-yourself Some day-to-day and regular maintenance is essential to maintain your vehicle ’ s good mechanic al condition, as well as its emis- sion and engine performance. It is the owner ’ s responsibility to make sure that the scheduled maintenance, as well as general maintenance, is performed.
is released. When driving in areas using road salt or other corrosive materials, check lubrication frequently. Lights*: Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely.
8-4 Maintenance and do-it-yourself fraying, wear or damage. Seats: Check seat position controls such as seat adjusters, seatback recliner, etc. to ensure they operate smoothly and that all latches lock securely in every position.
Underbody: The underbody is frequently exposed to corrosive substances such as those used on icy roads or to control dust. It is very important to remove these substances, otherwise rust will form on the floor pan, frame, fuel lines and around the exhaust system.
8-6 Maintenance and do-it-yourself are under high pressure even when the engine is off. CAUTION . Do not work under the hood while the engine is hot. T urn the engine off and wait until it cools down. . Avoid direct contact with used engine oil and coolant.
SDI2585 VK56VD ENGINE MODEL 1. Window washer fluid reservoir 2. Fuse/fusible link holder 3. Engine oil dipstick 4. Power steering fluid reservoir 5. Engine oil filler cap 6. Brake fluid reservoir 7. Fuse/fusible link holder 8. Battery 9. Radiator filler cap 10.
8-8 Maintenance and do-it-yourself The engine cooling system is filled at the factory with a pre-diluted mixture of 50% Genuine NISSAN Long Life Antifreeze/Cool- ant (blue) and 50% water to provide year- round anti-freeze and coolant protection. The antifreeze solution contains rust and corrosion inhibitors.
SDI2511 CHECKING ENGINE C OOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below MIN * 2 , open the reservoir tank cap and add coolant up to the MAX * 1 level. If the reservoir tank is empty, chec k the coolant level in the radiator when the engine is cold.
8-10 Maintenance and do-it-yourself SDI2531 CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operat- ing temperature. 3. Turn off the engine. Wait more than 15 minutes for the oil to drain back into the oil pan.
SDI2528 Engine oil and filter 1. Place a large drain pan under the drain plug. 2. Remove the oil filler cap. 3. Remove the drain plug * 1 with a wrench and completely drain the oil. CAUTION Be careful not to burn yourself, as the engine oil is hot. . Waste oil must be disposed of properly .
8-12 Maintenance and do-it-yourself dipstic k. Add engine oil if necessary. After the operation 1. Install the engine undercover into position as the following steps. a. Pull the center of the small plastic clip out. b. Hold the engine undercover into position.
SDI1765A Check the fluid level in the reservoir. The fluid level should be chec ked using the HOT range ( * 1 : HOT MAX., * 2 : HOT MIN.) at fluid temperatures of 122 to 176 8 F (50 to 80 8 C) or using the COLD range ( * 3 : C OLD MAX., * 4 : COLD MIN.
8-14 Maintenance and do-it-yourself . Do not spill the fluid on painted surfaces. This will damage the paint. If fluid is spilled, wash the surface with water.
SDI2517 WARNING Antifreeze is poisonous and should be stored carefully in marked containers out of the reach of children. Fill the window washer fluid reservoir periodically . Add window washer fluid when the low window washer fluid warning illuminates.
8-16 Maintenance and do-it-yourself . Keep the batter y surface clean and dry. Clean the battery with a solution of baking soda and water. . Make certain the terminal connections are clean and securely tightened.
SDI1480C 1. Remove the cell plugs * A . 2. Add distilled water up to the UPPER LEVEL * 1 line. If the side of the battery is not clear, chec k the distilled water level by looking directly above the cell; the condition * 1 indicates OK and the conditions * 2 needs more to be added.
8-18 Maintenance and do-it-yourself SDI2533 1. Power steering fluid pump 2. Water pump 3. Alternator 4. Crankshaft pulley 5. Air conditioner compressor WARNING Be sure the ignition switch is in the OFF or LOCK position before servicing drive belts. The engine could rotate unexpectedly.
SDI2020 REPLACING SP ARK PLUGS If replacement is required, see an INFINITI retailer for servicing. Iridium-tipped spark plugs It is not necessary to replac e the iridium- tipped spark plugs as frequently as the conventional type spark plugs since they will last much longer.
8-20 Maintenanc e and do-it-yourself cleans the air, it stops flame if the engine backfires. If it isn ’ t there, and the engine backfires, you could be burned. Do not drive with the air cleaner removed, and be careful when working on the engine with the air cleaner removed.
SDI2048 REPLACING Replace the wiper blades if they are worn. 1. Pull the wiper arm. 2. Push the release tab * A , and then move the wiper blade down the wiper arm * 1 while pushing the release tab to remove. 3. Insert the new wiper blade onto the wiper arm until a click sounds.
8-22 Maintenanc e and do-it-yourself Contact an INFINITI retailer if checking or replacement is required. If the brakes do not operate properly, have the brakes chec ked by an INFINITI retailer. SELF-ADJUSTING BRAKES Y our vehicle is equipped with self-adjust- ing brakes.
several times. The pedal travel distance will decrease gradually with each de- pression as the hydraulic pressure decreases. If the brakes do not operate properly, have the brakes chec ked by an INFINITI retailer.
8-24 Maintenanc e and do-it-yourself SDI1754 5. If the fuse is open * A , replace it with a new fuse * B . Spare fuses are stored in the passenger compartment fuse box. 6. If a new fuse also opens, have the electrical system checked and repaired by an INFINITI retailer.
SDI2704 Extended storage fuse switc h (if so equipped) T o reduce battery drain, the extended storage fuse switch comes from the factory switched off. Prior to delivery of your vehicle, the switch is pushed in (switched on) and should always remain on.
8-26 Maintenanc e and do-it-yourself SDI2451 Replace the battery as follows: 1. Release the lock knob at the back of the Intelligent Key and remove the mechan- ical key. 2. Insert a small screwdriver into the slit of the corner and twist it to separate the upper part from the lower part.
ence rec eived, including int erference that may cause undesired operation. Note: Changes or modifications not ex- pressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. For Canada: This device complies with RSS-210 of Industry Canada.
8-28 Maintenanc e and do-it-yourself SDI2606 1. Map light 2. Front parking light 3. Front side marker light 4. Front turn signal light 5. Fog light 6. Headlight (high-beam, low-beam) 7. Puddle light 8. Step light 9. Side turn signal light 10. Cargo light 11.
HEADLIGHTS Replacing Fog may temporarily form inside the lens of the exterior lights in the rain or in a car wash. A temperature difference between the inside and the outside of the lens causes the fog. This is not a malfunction. If large drops of water collect inside the lens, contact an INFINITI retailer.
8-30 Maintenanc e and do-it-yourself Replacement procedures All other lights are either type A, B, C, D, E or F . When replacing a bulb, first remove the lens and/or cover.
SDI1729 Cargo light SDI2032 V anity mirror light If you have a flat tire, see “ Flat tire ” in the “ 6. In case of emergency ” section. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS).
8-32 Maintenanc e and do-it-yourself TPMS with Tire Inflation Indicator provides visual and audible signals outside the vehicle for inflating the tires to the recommended COLD tire pressure. (See “ TPMS with Tire Infla- tion Indicator ” in the “ 5.
SDI2496 Tire and Loading Information label * 1 Seating capacity: The maximum number of occupants that can be seated in the vehicle. * 2 V ehicle load limit: See “ V ehicle loading information ” in the “ 9. T ec hnical and consumer informa- tion ” section.
8-34 Maintenanc e and do-it-yourself SDI1949 Checking the tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem.
SDI1575 Example TIRE LABELING Federal law requires tire manufac- turers to place standardized informa- tion on the sidewall of all tires. This information identifies and describes the fundamental c haracteristics of the tire and also provides the tire identification number (TIN) for safety standard certification.
8-36 Maintenanc e and do-it-yourself SDI1607 Example * 2 TIN (Tire Identification Number) for a new tire (example: DOT XX XX XXX XXXX) 1. DOT: Abbreviation for the “ Depart- ment of Transportation ” . The sym- bol can be placed above, below or to the left or right of the Tire Identification Number.
bears white lettering or bears manu- facturer, brand and/or model name molding that is higher or deeper than the same molding on the other side- wall of the tire, or (2) the outward facing sidewall of an asymmetrical tire that has a particular side that must always fa ce outward when mounted on a vehicle.
8-38 Maintenanc e and do-it-yourself TIRE CHAINS Use of tire chains may be prohibited according to location. Check the local laws before installing tire chains. When instal- ling tire chains, make sure they are the proper size for the tires on your vehicle and are installed according to the chain man- ufacturer ’ s suggestions.
Wheel nut tightening torque: 98 ft-lb (133 N·m) The wheel nuts must be kept tigh- tened to the specification at all times. It is recommended that wheel nuts be tightened to the specifica- tion at each tire rotation interval. WARNING . After rotating the tires, chec k and adjust the tire pressure.
8-40 Maintenance and do-it-yourself . The original tires have built-in tread wear indicators. When wear indicators are visible, the tire(s) should be replaced. . Tires degrade with age and use. Have tires, including the spare, over 6 years old chec ked by a qualified technician, because some tire damage may not be obvious.
wheel or tire even if it has been repaired. Such wheels or tires could have struc- tural damage and could fail without warning. . The use of retread tire is not recom- mended.
8-42 Maintenance and do-it-yourself — Tire Pressure Monitoring System (TPMS) — V ehicle Dynamic C ontrol (VDC) Sys- tem . Periodically check spare tire inflation pressure. Always keep the spare tire inflated to the pressure specification shown on the Tire and Loading Informa- tion label.
9 T ec hnical and consumer information Capacities and recommended fuel/lubricants ....... 9-2 Fuel information .............................................. 9-4 Engine oil and oil filter recommendation ......... 9-6 Air conditioning system refrigerant and lubricant recommendations .
9-2 T echnical and consumer information The following are approximate capacities. The actual refill capacities may be a little different. When refilli ng, follow the procedur e instructed in the “ 8. Maintenance and do-it-yourself ” section to determine the proper refill capacity.
*9: Available in mainland US through an INFINITI retailer. *10: Using Hydraulic Suspension fluid other than Genuine NISSAN Hydraulic Suspension fluid will damage the Hydraulic Suspension, which is not covered by the INFINITI new vehicle limited warranty.
9-4 T echnical and consumer information FUEL INFORMA TION VK56VD engine INFINITI recommends the use of unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96).
fuel is not covered by the INFINITI new vehicle limited warranty. . If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol). It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors.
9-6 T echnical and consumer information engine load. JVT0159X 1. API certification mark 2. API servi ce symbol ENGINE OIL AND OIL FIL TER RE- C OMMENDA TION Selecting the correct oil It is essential t.
Oil which may contain foreign matter or has been previously used should not be used. Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important that the engine oil viscosity be selected based on the temperatures at which the vehicle will be operated before the next oil change.
9-8 T echnical and consumer information Contact an INFINITI retailer when servicing your air conditioning system. ENGINE Model VK56VD Type Gasoline, 4-cycle Cylinder arrangement 8-cylinder, V-slanted at 90 8 Bore 6 Stroke in (mm) 3.858 6 3.622 (98 6 92) Displacement cu in (cm 3 ) 338.
STI0397B WHEELS AND TIRES Road wheel Type Size Offset in (mm) Conventional 20 6 8J 1.18 (30) 22 6 8J Spare 20 6 8J Tire Type Size Pressure PSI (kPa) [Cold] Conventional P275/60R20 114H 35 (240) P275/5.
9-10 T echnical and consumer information DIMENSIONS Overall length in (mm) 208.3 (5,290) Overall width in (mm) 79. 9 (2,030) Overall height in (mm) 75.
If you plan to travel in another country, you should first find out if the fuel available is suitable for your vehicle ’ s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline.
9-12 T echnical and consumer information STI0709 ENGINE SERIAL NUMBER The number is stamped on the engine as shown. STI0448 F .M. V .S.S./C.M. V .S.S. CERTIFICA- TION LABEL The Federal/Canadian Motor V ehicle Safety Standards (F .M. V .S.S./C.M. V .S.
STI0494 TIRE AND LOADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label affixed to the pillar as illustrated. STI0739 AIR C ONDITIONER SPECIFICA TION LABEL The air conditioner specification label is attached as shown.
9-14 T echnical and consumer information WARNING . It is extremely dangerous to ride in a car go area inside the vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. . Do not allow people to ride in any area of vehicle that is not equipped with seats and seat belts.
STI0445 VEHICLE L OAD CAPACITY Do not exc eed the load limit of your vehicle shown as “ The c ombined weight of occupants and cargo ” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “ Seating Capa- city ” on the Tire and Loading In- formation label.
9-16 T echnical and consumer information 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the available amount of cargo and luggage load capacity . For exam- ple, if the XXX amount equals 1400 lbs.
the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury. . The child restraint top tether strap may be damaged by contact with items in the cargo area. Secure any items in the cargo area. Y our child could be seriously injured or killed in a collision if the top tether strap is damaged.
9-18 T echnical and consumer information WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and performance and may lead to accidents. CAUTION . Do not tow a trailer or haul a heavy load for the first 500 miles (800 km).
towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The transmission high fluid temperature and engine protection mode, which helps reduce the chance of transmission and engine damage, could activate and automatically decrease engine power.
9-20 T echnical and consumer information TI1012M MAXIMUM GROSS VEHICLE WEIGHT (GVW)/MAXIMUM GROSS AXLE WEIGHT (GAW) The GVW of the towing vehicle must not exceed the Gross Vehicle Weight Rating (GVWR) shown on the F .M. V .S.S./C.M. V .S.S. certification label.
. Gross Vehicle Weight (GVW) as weighed on a scale - including passengers, cargo and hitch - 6,450 lb. (2,926 kg). . Gross Vehicle Weight Rating (GVWR) from F .M. V .S.S./C.M. V .S.S. certification label - 7,300 lb. (3,311 kg). . Gross Combined Weight Rating (GCWR) from “ T owing Load/Specification ” chart - 14,300 lb.
9-22 T echnical and consumer information TOWING L OAD/SPECIFICA TION TOWING LOAD/SPECIFICA TION CHART Unit: lb (kg) US Canada Two-Wheel Drive (2WD) model Four-Wheel Drive (4WD) model Four-Wheel Drive .
STI0804 T o access the trailer hitch * A , remove the trailer hitch cover located on the lower part of the rear bumper. T o remove the trailer hitch cover: 1. Remove the 2 clips. 2. Pull the bottom of the cover straight backward to remove the inner side and upper clips.
9-24 T echnical and consumer information weight transferred through the frame and pushing down on the front wheels. This gives stability to the tow vehicle. A weight-distributing hitch system (Class IV) is recommended if you plan to tow trailers with a maximum weight over 5,000 lbs (2,267 kg).
10,000 lb (4,545 kg). A weight distributing hitch should be used to tow trailers that weigh over 5,000 lb (2,267 kg). Y our vehicle may be equipped with Class IV trailer hitch equipment that has a 10,.
9-26 T echnical and consumer information using the vehicle tail light, stoplight and turn signal circuits as a signal source. The module/converter must draw no more than 15 milliamps from the stop and tail lamp circuits. Using a module/ converter that exceeds these power requirements may damage the vehicle ’ s electrical system.
clearance is known. T railer towing tips In order to gain skill and an understanding of the vehicle ’ s behavior, you should practice turning, stopping and backing up in an area which is free from traffic. Steering stability, and braking perfor- mance will be somewhat different than under normal driving conditions.
9-28 T echnical and consumer information emergency ” section. . T railer towing requires more fuel than normal circumstances. . Avoid towing a trailer for your vehicle ’ s first 500 miles (800 km).
tail pipe or rear bumper. . Make sure you disconnect the trailer lights before backing the trailer into the water or the trailer lights may burn out. When towing a trailer, the transmission fluid should be changed more frequently. For additional information, see the INFINITI Service and Maintenance Guide.
9-30 T echnical and consumer information DOT (Department Of T ransportation) Qual- ity Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applic- able on the tire sidewall between tread shoulder and maximum section width.
Y our INFINITI is covered by the following emission warranties. For USA: . Emission Defects Warranty . Emissions Performance Warranty Details of these warranties may be found with other vehicle warranties in your Warranty Information Booklet that comes with your INFINITI.
9-32 T echnical and consumer information www.saferc ar.gov . Y ou may notify INFINITI by contacting our C onsumer Affairs Department, toll-free, at 1-800-662-6200.
the vehicle may be reset to a “ not ready condition ” . Before taking the I/M test, chec k the vehicle ’ s inspection/mainte- nance test readiness condition.
9-34 T echnical and consumer information Genuine INFINITI Service Manual for this model year and prior can be purchased. A genuine INFINITI Service Manual is the best source of service and repair information for your vehicle. This manual is the same one used by the factory-trained technicians working at INFINITI retailerships.
10 Index A ABS (Anti-lock Braking System) ....................... 5-113 Adaptive front lighting system (AFS) .................. 2-41 Advanced air bag system .................................. 1-61 Aiming control Adaptive front lighting system (AFS) ..
10-2 C Cabin air filter ................................................... 4-46 Capacities and recommended fuel/lubricants ...... 9-2 Car phone or CB radio ...................................... 4-98 Cargo floor box ..................................
Remote engine start operation indicator ...... 2-24 Starting the engine ...................................... 5-14 Entry/exit function, Automatic drive positioner ... 3-33 Event Data Recorders (EDR) ............................... 9-33 Exhaust gas (carbon monoxide) .
10-4 I Ignition switch (Push-button) ............................ 5-11 Immobilizer system ........................................... 2-32 In-cabin microfilter ........................................... . 4-46 Indicator Dot matrix display ...........
Low tire pressure warning light ......................... 2-15 Low tire pressure warning system (See tire pressure monitoring system (TPMS)) ..... 5-4 Luggage hooks ................................................. 2-59 M Maintenance Battery .........
10-6 R Radio ................................................................ 4-47 Car phone or CB radio ................................. 4-98 FM-AM- SA T radio with Compact Disc (CD) player ................................................... 4-60 Rain-sensing auto wiper system .
Switch Autolight switch ........................................... 2-39 Fog light switch ........................................... 2-44 Hazard warning flasher switch ....................... 6-2 Headlight aiming control .............................
10-8 V oltmeter .......................................................... 2-10 W Warning Check tire pressure warning ......................... 2-25 Dot matrix display ....................................... 2-22 Hazard warning flasher switch ........
MEMO 10-9 I n f o r m a t i o n P r o v i d e d b y :.
MEMO I n f o r m a t i o n P r o v i d e d b y :.
MEMO I n f o r m a t i o n P r o v i d e d b y :.
FUEL REC OMMENDA TION: VK56VD engine INFINITI recommends the use of unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96).
2014 Infiniti QX80 Owner’s M anual Printing: June 2013 (09) / OM14E 0Z62U0 / Printed in U.S.A. For y our safety , read caref ully and k eep in this vehicl e.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Infiniti QX80 (2014) è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Infiniti QX80 (2014) - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Infiniti QX80 (2014) imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Infiniti QX80 (2014) ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Infiniti QX80 (2014), ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Infiniti QX80 (2014).
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Infiniti QX80 (2014). Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Infiniti QX80 (2014) insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
