Manuale d’uso / di manutenzione del prodotto MD-9010 del fabbricante Impex
Vai alla pagina of 33
NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Warranty Ordering Parts Model MD-9010 Retain This Manual for Reference 08-08-06 OWNER'S MANUAL MARCY ® DIAMOND ELITE SMITH MACHINE MD-9010 IMPEX ® INC.
TA BLE OF CONTENTS BEFORE YOU BEGIN..................................................................……………. 1 IMPORTANT SAFETY NOTICES.................................................................… 2 SMITH MACHINE HARDW ARE PACK….....
IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine.
WA RNING LA BEL PLA CEMENT The w arning labels show n here have been placed on the Rear Base, Rear Stabiliz er, and Upper Frame. If the labels are missing or illegible, please call customer serv ice at 1-800-888- 8899 for replacements. A pply the labels in the location s hown.
SMITH MA CHINE HA RDWA RE PA CK 4.
SMITH MA CHINE HA RDWA RE PA CK 5.
SMITH MA CHINE A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended tw o or more people assembling this machine to avoid possible inj ury. STEP 1 (See Diagram 1) A.
STEP 2 (See Diagram 2) A.) Attach a Fr ont Vertical Frame (#3) to the r ight Base Frame ( #1). Secure it w ith two M10 x 3” Carr iage Bolt s (#76), one 5 1/8” x 2 ¾” Bracket (#34), tw o Ø ¾” W ashers (#66), and two M10 Ai rcraft Nuts (#86) .
DIAGRAM 2 8.
STEP 3 (See Diagram 3) A.) Attach the R ear Vertic al Beam (#6) to the top of the Cross Br ace (#2). Attach the W eight Glide Base (#8) to the Cross Brace from the Bottom. Ali gn the holes. Secur e them wi th two M 10 x 3” C arriag e Bolts (#76), Ø ¾” W ashers (#66), and M10 Air craft Nuts (#86).
STEP 4 (See Diagram 4) A.) Attach the W eight Gli de Post (#7) onto the W eight Glide Base (#8) . Secure it w ith f our M10 x 1” C arriag e Bolts (#74), Ø ¾” W ashers (#66) and M10 Air craft Nuts (#86). B.) Sl ide the Slidi ng W eight Post (#14) onto the Chr o med Post f rom the top.
STEP 5 (See Diagram 5) A. Place the Left Upper Frame ( #94) onto the Front Top Beam (#15). Secur e it with tw o M10 x 3 1/8” Carr iage Bolt s (#77), one 5 1/8” x 2 3/8” Bracket (#35), tw o Ø ¾” W ashers (#66), and two M 10 Aircraft Nuts (#86) .
STEP 6 (See Diagram 6) A.) Secur ely ti ghten all N uts and Bolts prev iously installed. B.) Attach the Butter fly Base (#12) to the front of Rear Vertical Beam (#6). Attach the Butterfly Pulley Bracket (#13) to the back of the Rear Vertical Beam. Al ign the hol es.
CABLE LOOP DIAGRAM 13.
STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Attach one end of 87” Butter fly Cabl e (#42) to the cli p on Right Butter f ly (#11) . Draw the Cable to the right Sw ivel Pulley Bracket (#20).
STEP 8 (See Diagram 8 & Cable Loop Diagram) A.) Un-instal l the M10 x 1 1/8” All en Bolt (#104) and M 10 Aircr aft Nut (#86) on the U- shaped Connector on one end of the 229” Cable ( 41). Remove the U-shaped C onnector, Big W asher, and Ball Stopper from the Cable.
16.
STEP 9 (See Diagram 9 & Cable Loop Diagram) A.) Attach one end of the 138” Sl iding W eight Post Cabl e (#102) to the open bracket on the Sliding W eight Post (#14) . Secure it with one M10 x 1” Allen Bolt (#68), tw o Ø ¾” W ashers (#66), and one M10 Ai rcraft Nut ( #86).
DIAGRAM 9 18.
STEP 10 (See Diagram 10) A.) Attach the 59” Lower Cable (#40) to a Pulley (#57). Attach the Pull ey to the l ower openi ng on the Rear Verti cal Beam (#6) . Secure it w ith the Foot Plate (#16), one M10 x 3 3/8” Allen Bolt (#73), tw o Ø ¾” W ashers (#66), and one M 10 Aircr aft Nut (#86).
STEP 11 (See Diagram 11) A.) N OTE: Help of another person is str ongly recommended fo r this step. Place the Lifting Sleeve ( #27) in betw een the two Safety Stop Frames (#26).
EXPLODED DIAGRAM 21.
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Base Fram e 2 55 Sliding Sleeve 4 2 Cross Br ace 1 56 Lock Ring 2 3 Front Vertic al Beam 2 57 Pulley 10 4 Left Vertic al Fram e 1 58 Ø 1 ¾” Rubber Bum per 1.
MULTI-PURPOSE BENCH HA RDWA RE PA CK 23.
MULTI-PURPOSE BENCH A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and A llen Wrenches. NOTE: It is strongly recommended this machine be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.
STEP 2 (See Diagram 2) A.) Attach four Bushi ngs (#27) to a Seat Support Frame (#6) . B.) Attach a Backr est Support (#7) to the rear of the Seat Support Frame (#6) . Alig n the holes and secure them w ith one M10 x 1 ¾” Al len Bolt (#37) and ∅ ¾” W asher (#42).
STEP 3 (See Diagram 3) A.) Pl ace the Backrest Board (#14) onto the Backrest Supports (#7) . Secure it with four M8 x 2” Allen Bolts ( #40) and ∅ 5/8” W ashers (#43). B.) Pl ace the Seat Pad (#13) onto the Seat Support Fr ames (#6). Secure it wi th four M8 x 2” Allen Bol ts (#40) and ∅ 5/8” W ashers (#43).
STEP 4 (See Diagram 4) A.) Attach the Leg Dev eloper (#5) to the open bracket on the Mai n Frame (#1). Secur e it w ith an Axle ( #17), tw o M10 x ¾ ” Allen Bolts (#36), and tw o ∅ ¾” W ashers (#42). B.) Insert one Foam Tube (#10) hal fway through the hol e on the Main Frame.
STEP 5 (See Diagram 5) A.) Attach the Ar m Curl Pad ( #15) to the Arm C url Stand (#4) . Secure it w ith two M8 x 5/8” Allen Bolts (#41) and tw o ∅ 5/8” W ashers (#43). Insert the Arm C url Stand into the front openi ng on the Main Frame ( #1). Use the Lock Knob to hol d the desired Arm C url heig ht.
29.
MULTI-PURPOSE BENCH PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 Front Stabilizer 1 3 Rear Stabilizer 1 4 Arm Curl Stand 1 5 Leg Devel oper 1 6 Seat Support Frame 2 7 Backrest Support 2 8 Sl.
MD-9010 WEIGHT RESISTANCE CHART Station Ratio Example Low Pulley 200% 10 lb. plate creates 20 lb. resistance Lat Pull 100% 10 lb. plate creates 5 lb. resistance Butterfly (both arms) 100% 10 lb. plate creates 10 lb. resistance Left Cross-Over 50% 10 lb.
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be f ree f rom def ects in work m ans hip and m aterial, under norm al use and service conditions, for a period of two years on the Fram e fr om the date of purc hase.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Impex MD-9010 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Impex MD-9010 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Impex MD-9010 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Impex MD-9010 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Impex MD-9010, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Impex MD-9010.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Impex MD-9010. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Impex MD-9010 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
