Manuale d’uso / di manutenzione del prodotto MARCY MP-4500 del fabbricante Impex
Vai alla pagina of 37
MARCY ® PLATINUM CORNER GYM MP-4500 IMPEX ® INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746 Tel: (800) 999-8899 Fax: (626) 961-9966 www. im pe x-f it n e ss .
TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDW ARE PACK……….....….
IMPORTA NT SA FETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain pr ecautions apply whenev er you operate a pi ece of exercise eq uipment. Be sure to r ead the entire manual before y ou assemble or operate y our machine.
WA RNING LA BEL REPLA CEMENT The w arning lab els show n here have b een placed on t he Left Base Frame and Left Upper F rame. If the labels are missing or illegible, please call customer service at 1- 800-888-8899 for replacements. Apply the labels in location shown.
HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 4.
HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 5.
HA RDWA RE PA CK NOTE: The following parts are not drawn to scale. Please use y our own ruler or scale to measure the size. 6.
A SSEMBLY INSTRUCTI ON Tools Required A ssembling the Machine: Two Adj ustable Wrenches and A llen Wrenches NOTE: It is strongly recommended tw o or people assembling this machine to avoid possible injury . STEP 1 (See Diagram 1) A.) Place the Rig ht Base Frame (#31) on a flat sur face.
DIAGRAM 1 8.
STEP 2 (See Diagram 2) A.) Attach the Rig ht Upper Fr ame (#1) onto the Ri ght Verti cal Frame ( #4). Secure it w ith tw o M10 x 2 ¾” Car riag e Bolts (#98), one 4 ¾ ” x 2 ¾” Bracket ( #25), tw o Ø ¾” W ashers (#100), and tw o M10 Aircraft Nuts (#102) .
STEP 3 (See Diagram 3) A.) Attach the Front Pr ess Base (#2) to the Rig ht Upper Fr ame (#1). Secure i t with one 6 ¾ ” Front Press Base Ax le (#29), tw o Ø 1 ¼” x Ø 3/8” W ashers (#70), and tw o M10 Air craft Nuts (#102). D o not over ti ghten the Nuts; make sure the Base i s able to sw ivel .
DIAGRAM 3 11.
STEP 4 (See Diagram 4) A.) Attach the Seat Pad (#42) to the Seat Post (#6). Secure i t wi th two M8 x 1 5/8” Al len Bolts (#85) and Ø 5/8” W ashers (#101). B.) Insert the Seat Post i nto the opening on the Ri ght Seat Support ( #7). Secure it w ith a Lock Knob (#73) to lock the Seat Post at desir ed height.
STEP 5 (See Diagram 5) A.) Attach the Right Butter fly (#10) onto the axl e on the Butterfly Base (#13) . B.) Insert the Butterfly Handle (#9) into the piv ot on the Rig ht Butterfly. Secure i t wi th one M10 x ¾” All en Bolt (#95) and Ø 1 ¼” x Ø 3/8” W asher (#70) from the bottom.
STEP 6 (See Diagram 6) A.) Do not tig hten all Nuts and Bol ts in this Step until instructed to do so. B.) Attach the Left Vertical Fr ame (#33) onto the Left Base Frame (#32) . Secure it w ith tw o M10 x 2 ¾” Carri age Bolts ( #98), one 4 ¾” x 2 ¾” Bracket (#25) , two Ø ¾ ” W ashers (#100), and two M 10 Aircraft Nuts (#102) .
STEP 7 (See Diagram 7) A.) Attach the Left Upper Frame ( #34) onto the Left Vertical Fr ame (33). Secur e it w ith two M 10 x 2 ¾” Carri age Bolts ( #98), one 4 ¾” x 2 ¾” Bracket (#25) , two Ø ¾ ” W ashers (#100), and two M10 Ai rcraft Nuts (#102) .
STEP 8 (See Diagram 8) A.) Attach the Left Seat Support (#35) onto the Left Base Frame ( #32). Secure it w ith one M 10 x 3 ½” Carri age Bolt ( #99), Ø ¾” W asher (#100), and M 10 Aircr aft Nut (#102). B.) Attach the Left Seat Support to the Left Vertical Fr ame (#33).
STEP 9 (See Diagram 9) A.) Attach the Leg Pr ess Frame (#36) to the br acket on the Left Base Frame (#32). Secure i t wi th an Axle ( #15), tw o M10 x ¾ ” Allen Bol ts (#95), and tw o Ø ¾” W ashers (#100). B.) Insert the Leg Press Adjustment Frame ( #40) into the Leg Pr ess Frame.
STEP 10 (See Diagram 10 & Front Press Cable Loop Diagram) A.) Attach one end of the 140” Front Press C able (#48) to the br acket underneath the Rig ht Upper Frame ( #1). Secure it w ith one M 10 x 1” Al len Bolt (#94) , two Ø ¾ ” W ashers (#100), and one M10 Ai rcraft Nut ( #102).
DIAGRAM 10 19.
Front Press Cable Loop Diagram 20.
STEP 11 (See Diagram 11 & Low er Cable Loop Diagram) A.) Attach the 157” Low er C able (#46) to the l ower opening on the Leg Devel oper (#8) . Attach a Pulley (#67) to the opening . Secure it w ith one M 10 x 2 5/8” Al len Bolt ( #92), two Ø 7/8” x 5/8” Pul ley Bushi ngs ( #56), and one M10 Air craft Nut (#102).
DIAGRAM 11 22.
Low er Cable Loop Diagram 23.
STEP 12 (See Diagram 12 & Butterfly Cable Loop Diagram) A.) Clip one end of the 96” Butterfly Cable (#45) to the open slot on the Right Butterfly (#10). B.) Dr aw the Cabl e to the open bracket on the rig ht side of the Rig ht Vertical Frame (#4).
25.
Butterfly Cable Loop Diagram 26.
STEP 13 (See Diagram 13 and Upper Cable Loop Diagram) A.) Attach the 130’” Upper Cabl e (#44) to the front opening on the Left Upper Frame (#34) . Attach a Pulley (#67) to the opening . Secure it w ith one M 10 x 3 ½ ” Allen Bol t (#90), tw o Ø 7/8” x 1” Pulley Bushings (#53), and one M10 Ai rcraft Nut (#102) .
DIAGRAM 13 28.
Upper Cable Loop Diagram 29.
STEP 14 (See Diagram 14) A.) Attach the end of the 103” Leg Pr ess Cable (#47) to the bracket on the Leg Press Frame (#36). Secur e it w ith a M10 x 1 ¾” All en Bolt (#94) , two Ø ¾ ” W ashers (#100), and one M10 Airc raft Nut (#102). B.) Dr aw the Cabl e to the first open bracket on the front of Left Base Frame (#32).
DIAGRAM 14 31.
Leg Press Cable Loop Diagram 32.
STEP 15 (See Diagram 15) A.) Attach four W eig ht Stack Cover s (#41) to the Ri ght Upper Frame (#1) and R ight Base Fr ame (#31). B.) Secure each W eight Stack Cover with tw o M10 x 5/8” All en Bolts (#96) and Ø ¾ ” W ashers (#100).
PA RTS LIST KEY NO. DESCRIPTION Q’ty 1 Right Upper Fram e 1 2 Front Pres s Base 1 3 Front Press 1 4 Right Vertical Fr ame 1 5 Back rest Support Fam e 1 6 Seat Post 1 7 Right Seat Support 1 8 Leg Dev.
MP-4500 WEIGHT RESISTANCE CHART WEIGHT PLA TE Station 1 2 3 4 5 6 7 Low Pulley 22 33 44 55 66 77 88 Lat Pull 30 40 50 60 70 80 90 Leg Developer 26 38 50 62 74 86 98 Leg Press 36 60 84 108 132 156 180 .
IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be f ree fr om def ects in work m anship and mater ial, under normal use and service conditions , for a period of two y ears on the Fram e f rom the date of purc hase.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Impex MARCY MP-4500 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Impex MARCY MP-4500 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Impex MARCY MP-4500 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Impex MARCY MP-4500 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Impex MARCY MP-4500, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Impex MARCY MP-4500.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Impex MARCY MP-4500. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Impex MARCY MP-4500 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
