Manuale d’uso / di manutenzione del prodotto 60 del fabbricante IGo Direct
Vai alla pagina of 30
www.igo.com iGo ™ Stowaway ® Ultra-Slim Bluetooth ® Keyboard Owner’s Manual for Symbian Series 60 Mobile Devices Keyboard Driver: 1.21 Stowaway Ultra-Slim Owner’s Manual for Symbian Series 60 .
Setting up the Keyboard ................................................. 3 Before You Begin .................................................................................... 3 Installing the Software ...............................................
Setting up the Keyboard Before You Begin Before you install the Stowaway keyb oard software for Symbian Series 60 mobile devices: ¾ Disable or uninstall any other key b oa rd applications that you have previously installed on your mobile device. (Refer t o the User’s Guide included with your mobile device for instruction on how to do this.
Configuring the Keyboard to your Device NOTE: The Bluetooth connection between the mobile device and keyboard must be set up through the Stowaway keyboard driver. 1. The main screen of the Stowaway Keyboard application is the Status screen. The Status window gives you the keyboard connection status, battery and firmware information.
3. After you select Enable BT , the Stowaway keyboard application will enable the Bluetooth system software ( Bluetooth Stack ) on your mobile device, and will begin scanning for the keyboard. 4. You will be prompted for a Passkey . You may see this Bluetooth Passkey dialog box, but this may vary by device.
6. If the Passkey is entered successfully on both devices, the message BT Keyboard Connected will appear on the Status tab . If the keyboard does not show up as connected: a. Press the <Ctrl> < Left Fn > < Right F n > keys together on the keyboard again.
OTHER FEATURES 1. If several Stowaway keyboards happen to be nearby and in Discoverable mode, the scan will display all of these devices in a list. Compare the keyboard ID (Bluetooth address) printed on the back of the keyboard with the IDs in the list and select the desired keyboard to connect to.
4. The Keys tab allows you to remap the default application launch Hot keys available in the driver < Left Fn > + <letter> (row two keys), as well as assign applications or files to open with the <Alt> + < Left Fn > + <number> (row one 1-0 keys).
Reconnecting the Stowaway keyboard The above steps establish the Blueto oth wireless connection and bonding between the mobile device and the ke yboard for the firs t time. Keyboard character input should be enabled as long as the connection is maintained.
Even when disconnected, the mobile device and the keyboard remain bonded. The keyboard will only reconnec t to the bonded mobile device and the mobile device will only listen to th e bonded keyboard. To break the bond press <Ctrl> < Left Fn > < Right Fn > for approximately 1 second or until the green LED flashes quickly.
Automatic Reconnection from Waiting Mode Some mobile devices have more restrict ive Bluetooth settings than others, in terms of the type of operating mode, or the type of paired device the software will allow reconnection with fr om waiting mode.
Customizing Your Keyboard Keyboard Control Panel NOTE: The Options button and Options tab within the Bluetooth keyboard application have somewhat di fferent functionality.
Disabling the Stowaway keyboard When the Stowaway keyboard is no longer needed, you may disable the keyboard driver by pressing the Options button . The BT Disabled message will then be displayed on the Status page. NOTE: Disabling the Bluetooth keyboard will not automatically turn off the Bluetooth radio.
Keyboard Status Light When the keyboard is open there is a light above the <T> key that indicates the status of the keyboard. ¾ When the keyboard status light flashes a fast green light (approx. once per second) it is in Discoverable mode . This is the state that allows it to be detected by the mobile device.
Using the Stowaway keyboard Character Input • Commands joined by a dash “ – ” mean that the key combination must be pressed in order and with all keys held down at the same time. • Commands joined by a plus “ + ” mean that the key following the “ + ” must be pressed after the initial key combination is pressed and released.
Launching and Navigating Applications Opening various applications can be pe rformed with the keyboard using the shortcuts provided in this table. The us er can also map favorite applications to assigned Hot Keys within the keyboard driver application.
International and Extended Character Set International characters are produced by pressing the Alt key with the corresponding keys in the table below. Both upper and lower case characters are supported when shift or Caps Lock.
Frequently Asked Questions Q: My keyboard and handheld ar e in-range and powered on, why won’t they reconnect after a key press? A: The current Bluetooth settings on yo ur mobile device may preclude an automatic reconnection.
Legal Notices Mobility California, Inc. and its affiliate s shall not be liable for technical or editorial errors or omissions containe d herein or for special, indirect, incidental or consequential damages whatsoever in connection with the furnishing, performance, or use of th is material.
Warranty Mobility California warrants this produc t against defects in materials and workmanship under normal us e for a period of one (1) year from the date of original retail purchase.
Obtaining Warranty Service Customer must contact Mobility Califor nia within the applicable warranty period to obtain warranty service auth orization. Dated proof of original purchase will be required for warrant y service, repair, or replacement.
Important Battery Information • Keep battery away from children. • Always replace old, weak or worn-o ut batteries promptly and recycle or dispose of them properly. Be fore inserting a new battery, the battery compartment should be clea ned. If fluid from the battery comes into contact with skin or clot hes, flush with water immediately.
Important Notes about Bluetooth Devices The Stowaway keyboard can emit radio frequency (RF) energy whenever the green LED is flashing. Care should be taken when used around medical devices or equipment. For specific in formation, consult with the product manufacturer or your physician before use.
Wireless Regulatory Information The Stowaway device must be used in strict accordance with the manufacturer's instructions as describ ed in the user documentation that comes with the product. For country-spec ific approvals, see Radio approvals. Mobility California, Inc.
FCC Notices This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protecti on against harmful interference in a residential installation.
FCC Identification Information The following information is provided on the device or devices covered in this document in compliance with FCC regulations: • Model number(s): XTBT01 • Company name: Mobility Electronics, Inc. 9918 Via Pasar San Diego, California 92126 United States of America 1.
Europe – CE Declaration of Conformity EN 301 489-1 (2004), EN 301 489-17 (2002), EN 300 328-1 (2001), EN 300 328-2 (2001), EN 60950 (2001) English Hereby, Mobility California, In c. declares that this XTBT01 is in compliance with the esse ntial requirements and other relevant provisions of Directive 1999/5/EC.
Swedish Härmed intygar Mobility Ca lifornia, Inc. att denna XTBT01 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
France Some areas of France have a restricte d frequency band. The worst case maximum authorized power indoors is: 10 mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz). 100 mW for frequencies between 2446.5 MHz and 2483.5 MHz (NOTE— Channels 10 through 13 inclusive operate in the band 2446.
Features and Specifications Summary • Small, foldaway design makes it easy to put in your pocket or briefcase. • Simple connection compatibility with yo ur Pocket PC device via Bluetooth. • Full size QWERTY keyboard layout for optimum comfort while typing.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il IGo Direct 60 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del IGo Direct 60 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso IGo Direct 60 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul IGo Direct 60 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il IGo Direct 60, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del IGo Direct 60.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il IGo Direct 60. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo IGo Direct 60 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
