Manuale d’uso / di manutenzione del prodotto IC-4008E del fabbricante Icom
Vai alla pagina of 32
INSTRUCTION MANUAL LPD FM HANDHELD TRANSCEIVER i4008E IC-4008E-2 02.3.23 3:26 PM Page 33 (1,1).
i FOREWORD Thank you for purchasing the IC-4008E LPD (Low Power De- vice) FM transceiver . This LPD FM transceiver meets the Euro- pean LPD specification (ETS 300 220). This transceiver is designed for those who require top-grade quality , performance and outstanding reliability under the most demanding condi- tions.
ii ■ W A TER-RESIST ANT* CONSTRUCTION W ater-resistant* construction is employed. Can be used any- where, anytime. *Meets JIS water-protection specification grade 4 . ■ GROUP MODE ( BUIL T -IN CTCSS: Continuous T one Coded Squelch System ) CTCSS encoder/decoder are standard, providing quiet stand-by .
IMPORT ANT READ ALL INSTRUCTIONS carefully and completely before using the transceiver . SA VE THIS INSTRUCTION MANUAL– This instruction manual contains important operating instructions for the IC- 4008E LPD transceiver .
iv T ABLE OF CONTENTS FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i FEA TURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i–ii SUPPLIED ACCESSORIES . . . . . . .
P ANEL DESCRIPTION 1 1 ‘ ‘ Switches, controls, keys and connectors q ANTENNA w [PTT] e [UP] r [DO WN] t SPEAKER !0 [V OL] o DISPLA Y i [PO WER] u [MODE] y MIC !1 SP/MIC JA CKS IC-4008E-2 02.
2 P ANEL DESCRIPTION 1 q ANTENNA Extend the antenna completely when using the transceiver . • The antenna collapses completely into the transceiver body for car- rying purposes. • The antenna can be adjusted 90 degrees from the regular position when operating the transceiver in a horizontal position.
P ANEL DESCRIPTION 1 3 ‘ ‘ Function display q TRANSMIT INDICA TOR Appears during PTT on. w BUSY INDICA TOR Appears while receiving a signal or when the squelch is open. e KEY LOCK INDICA TOR Appears during key lock function ON. r AUTO POWER OFF INDICA TOR Appears while the auto power off function is ON.
4 2 ACCESSORIES D Antenna Adjust the antenna position as shown at right. Keep the jack cover attached when jacks are not in use to avoid bad contacts. D Belt clip Attach the belt clip using the supplied screws. Conveniently attaches to your belt. ‘ ‘ Accessory attachment IC-4008E-2 02.
‘ ‘ Installing batteries in the battery case Install 3 R6(AA) size alkaline, dry cell batteries or the BP-202 BA T- TERY P ACK as illustrated below . q Remove the battery case cover from the transceiver . w Install 3 × R6(AA) size dry cell, alkaline bat- teries or the BP-202.
6 3 BA TTERY P ACKS ‘ ‘ Battery pack charging The optional BP-202 BA TTERY P ACK includes rechargeable Ni-Cd batteries and can be charged approx. 300 times. Charge the battery pack before first operating the transceiver or when the battery pack becomes exhausted.
* 7 3 BA TTERY P ACKS ‘ ‘ Charging connections D Rapid charging with the BC-1 19L/BC-1 19+AD-89 q Insert the optional AD-89 DESKTOP CHARGER ADAPTER into the charging slot of the BC-1 19. • The BC-1 19L comes preinstalled with the AD-89 CHARGING ADAPTER .
4 BASIC OPERA TION 8 ‘ ‘ Power ON ➥ Push [ POWER ] for 1sec. to turn the power ON. • The power on indicator and oper- ating channel number appear on the display . ‘ ‘ Adjusting the volume q Push and hold [ MODE ] for 1sec. to open the squelch.
BASIC OPERA TION 9 4 ‘ ‘ Selecting the operating channel Push [ UP ]/[ Y ] or [ DOWN ]/[ Z ] keys sev- eral times until the desired operating channel number appears on the dis- play . • While pushing and holding [ UP ]/[ Y ] or [ DOWN ]/[ Z ] keys, the displayed chan- nel changes continuously until chan- nel number “ 1 ” appears.
5 RECEIVE AND TRANSMIT 10 q Push and hold [ MODE ] 1sec. to open the squelch. • Adjust volume to the desired audio level. (See p. 8) w Select a desired operating channel. When a signal is received: • Squelch opens and audio is emitted from the speaker .
11 6 ‘ ‘ Setting the group code The IC-4008E is equipped with 38 group codes. Group mode op- eration provides communication with silent standby since you will only receive calls from group members using the same group num - ber . First of all, set the same group code number for all group member ’s transceivers.
12 6 ✔ What is CTCSS (Continuous T one Coded Squelch Sys- tem) GROUP MODE ? CTCSS ( Continuous T one Coded Squelch System) GROUP MODE allows communication with silent stand by .
13 6 CTCSS: Continuous T one Coded Squelch System D CTCSS code table ✔ T alk Range The IC-4008E is designed to maximize performance and im- prove transmission range in the field. However , the single most important factor in transmit range (talk power) is your surrounding environment.
14 7 RING FUNCTION ‘ ‘ Smart-Ring The ring function has an answer back feature. This allows you to confirm whether or not a call has reached the receiving party even if the operator is temporarily away from the transceiver . q Set the same group channel number for all of your group transceivers.
15 OTHER FUNCTIONS 8 ‘ ‘ Initial set mode Initial set mode is accessed at power ON and allows you to set sel - dom changed settings. In this way you can “customize” transceiver operations to suit your preferences and operating style. D Auto power OFF This function sets the transceiver to auto- matically turn OFF after 2 hours elapse.
16 8 OTHER FUNCTIONS D PTT hold function This function frees you from having to constantly push [PTT] during conversation. q While pushing [PTT], push [POWER] ON to toggle the function ON or OFF . w “ ” appears on the display when the “PTT hold” function is activated.
OTHER FUNCTIONS 8 17 ‘ ‘ A TS (Automatic T ransponder System) This allows you to confirm whether or not a call has reached the re- ceiving party even if the operator is temporarily away from the transceiver . No “Ring” tone is emitted with this function.
18 8 OTHER FUNCTIONS ‘ ‘ LCD backlight ➥ Automatically turns ON for 5 sec. when you push any key , ex- cept [PTT]. ‘ ‘ Auto power save ➥ The power save function reduces the current drain to conserve battery power . - The function automatically turns ON when no operation is per- formed or no signal is received for 5 sec.
OTHER FUNCTIONS 8 19 ‘ ‘ Optional HM-75A functions The optional HM-75A allows you to remotely select operating chan- nels, open the squelch, etc. The switches on the HM-75A function as follows.
20 9 SPECIFICA TIONS GENERAL • Frequency coverage : 433.075–434.775 MHz • Mode : F3E (FM) • No. of operating ch. : 69 (simplex) • Frequency stability : ± 5.7 ppm; ±2.5 kHz • Frequency resolution : 25 kHz • Power supply requirement: 4.5 V (R6 × 3 ) or BP-202 • Current drain : Less than 140 mA • Operating temp.
OPTIONS 10 21 D Battery packs BP-202 Ni-Cd BA TTERY P ACK 3.6V/ 700 mAh rapid charge battery pack. (p. 6–7) D Chargers BC-1 19 DESKTOP CHARGER + AD-89 DESKT OP CHARGER ADAPTER Rapidly charge battery packs in 1 to 1.5 hrs. An AC adapter is packed with the BC-1 19.
22 11 MEMO Operating channel number Group code number ‘ ‘ Channel number and group number Use this page to record your group operating channel number (see p. 9) and group channel number (p. 1 1) for your reference. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 ch Freq.
23 11 MEMO IC-4008E-2 02.3.23 3:26 PM Page 28 (1,1).
24 11 MEMO IC-4008E-2 02.3.23 3:26 PM Page 29 (1,1).
25 12 CE ABOUT CE CE V ersions of the IC-4008E which display the “CE” symbol on the serial number seal, comply with the essential requirements of the European Radio and T elecommunication T erminal Direc- tive 1999/5/EC.
26 12 CE DECLARATION OF CONFORMITY We Icom Inc. Japan 1-1-32, Kamiminami, Hirano-ku Osaka 547-0003, Japan Kind of equipment: LPD FM TRANSCEIVER This compliance is based on conformity with the followin.
INSTRUCTION MANUAL 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003 Japan A-5460H -1EU- w Printed in Japan © 1997 Icom Inc. Count on us! o GER o AUT o GBR o IRL n FRA n NED o BEL o LUX n ESP n POR n ITA n GRE n SWE o DEN o FIN < Intended Country of Use > IC-4008E-2 02.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Icom IC-4008E è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Icom IC-4008E - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Icom IC-4008E imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Icom IC-4008E ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Icom IC-4008E, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Icom IC-4008E.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Icom IC-4008E. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Icom IC-4008E insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.