Manuale d’uso / di manutenzione del prodotto Series 1400 del fabbricante IBM
Vai alla pagina of 172
S09N-1084-01 IBM Mobile Systems ThinkPad i Series 1400/1500 (2621, 2651) Hardware Maintenance Manual February 2000.
S09N-1084-01 IBM Mobile Systems ThinkPad i Series 1400/1500 (2621, 2651) Hardware Maintenance Manual February 2000 IBM.
Before using this information and the product it supports, be sure to read the general information under “Introduction” on page 2, and “Read this first” on page 19.
Preface About this manual This manual contains service and reference information for IBM ThinkPad i Series 1400/1500 (2621) products. Use this manual along with the advanced diagnostic tests to troubleshoot problems effectively.
Important This manual is intended for trained servicers who are familiar with ThinkPad products. Use this manual along with the advanced diagnostic tests to trouble- shoot problems effectively.
Diskette Part, Form Number ThinkPad 300 (2615) Advanced Diagnostics Diskette 33G9361, S33G-9361 ThinkPad 350, 350C, 425, 425C (2618) Advanced Diag- nostics Diskette A211000, GA21-1000 ThinkPad 365 (26.
vi ThinkPad i Series 1400/1500 HMM.
Contents Preface . . . . . . . . . . . . . . . . . . . . . i i i ThinkPad i Series 1400/1500 Hardware Maintenance Manual . . . . . . . . . . . . . . . . . . . . . 1 General Descriptions . . . . . . . . . . . . . . . 1 Introduction . . . . . . . . . . .
Product overview . . . . . . . . . . . . . . . 44 FRU removals and replacements ........ 5 0 Parts list (ThinkPad i Series 1400/1500) ..... 9 0 ThinkPad i Series 1400/1500 (Part II) ...... 1 0 7 Product overview . . . . . . . . . . . . . . 108 FRU removals and replacements .
ThinkPad i Series 1400/1500 Hardware Maintenance Manual General Descriptions This chapter includes descriptions for any ThinkPad model that has the PC-Doctor DOS diagnostics program.
Introduction Important Service Information Important Diskette fixes are customer installable. The diskette fixes are located on the PC Company Bulletin Board Service (BBS). The direct phone line for modem con- nection is 919-557-0001 or tieline 255-0001.
View Configuration option) and verify that the settings are in place when service is complete. Hard Disk Drive Replacement Strategy: Always try to run a low-level format before replacing a hard disk drive. Attention: The drive startup sequence in the computer you are servicing might have been changed.
The following table provides identification information for 5.25-inch diskette drives. The following table provides compatibility information for 5.25-inch diskettes and 5.25-inch diskette drives. Note: A 360KB diskette written to or formatted on a 1.
Safety Notice 1 Before the computer is powered-on after FRU replace- ment, make sure all screws, springs, or other small parts are in place and are not left loose inside the computer. Verify this by shaking the computer and lis- tening for rattling sounds.
Safety Notice 2 Some standby batteries contain a small amount of nickel and cadmium. Do not disassemble it, recharge it, throw it into fire or water, or short-circuit it. Dispose of the battery as required by local ordinances or regu- lations. Use only the battery in the appropriate parts listing.
Safety Notice 3 The battery pack contains small amounts of nickel. Do not disassemble it, throw it into fire or water, or short- circuit it. Dispose of the battery pack as required by local ordinances or regulations. Use only the battery in the appropriate parts listing when replacing the battery pack.
Safety Notice 4 The lithium battery can cause a fire, explosion, or severe burn. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water. Dispose of the battery as required by local ordinances or regulations.
Safety Notice 5 If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your hands, immediately wash the affected areas with water for at least 15 minutes. Seek medical care if any symptoms from the fluid are present after washing.
Safety Notice 6 To avoid shock, do not remove the plastic cover that surrounds the lower portion of the inverter card. Afin d'éviter tout risque de choc électrique, ne retirez pas le cache en plastique protégeant la partie inférieure de la carte d'alimentation.
Safety Notice 8 Before removing any FRU, power-off the computer, unplug all power cords from electrical outlets, remove the battery pack, then disconnect any interconnecting cables.
Before you start the machine, ensure that other service representatives and the customer's personnel are not in a hazardous position. Place removed covers and other parts in a safe place, away from all personnel, while you are ser- vicing the machine.
– Working near power supplies – Removing or installing main units Before you start to work on the machine, unplug the power cord. If you cannot unplug it, ask the customer to power-off the wall box that supplies power to the machine and to lock the wall box in the off position.
– Motor generators and similar units. (This practice ensures correct grounding of the units.) If an electrical accident occurs: – Use caution; do not become a victim your- self. – Switch off power. – Send another person to get medical aid.
6. Check inside the unit for any obvious unsafe condi- tions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage. 7. Check for worn, frayed, or pinched cables. 8. Check that the power-supply cover fasteners (screws or rivets) have not been removed or tampered with.
Grounding Requirements: Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. Laser Compliance Statement Some IBM Personal Computer models are equipped from the factory with a CD-ROM drive.
CAUTION: Use of controls or adjustments or performance of pro- cedures other than those specified herein might result in hazardous radiation exposure. O uso de controles, ajustes ou desempenho de procedimentos diferentes daqueles aqui especificados pode resultar em perigosa exposição à radiação.
DANGER Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam. Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente por meio de instrumentos óticos e evite exposição direta com o feixe de luz.
Read this first Before you go to the check procedures, be sure to read this section. Important Notes Only certified trained personnel should service the computer. Read the entire FRU service procedures before replacing any FRUs. Use new nylon-coated screws when you replace FRUs.
Before checking problems with the computer, determine whether the damage is covered under the warranty by referring to the following: Note for Warranty: For Warranty: During the warranty period, the c.
FRU replacement notices This section contains notices for removal and replacement. Read this section carefully before replacing any FRU. LCD replacement notice The TFT LCD for the computer contains many thin-film transistors (TFTs).
Turn an additional 180 degrees after the screw head touches the surface of the plastic part: Torque driver If you have a torque driver, refer to the "Torque" column with each step. Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table if you have a torque screwdriver.
Note: The system unit serial number is written in the label attached on bottom of the computer. Bios Levels An incorrect level of BIOS can cause false error and unnecessary FRU replacement.
Related service information This section provides information about the following: “Power button as reset switch” “Running a low-level format” “Service Web site” “Passwor.
Removing the power-on and setup pass- words: Removing the power-on and setup passwords: Do the following to remove the passwords:: 1. Power off the computer. 2. Remove the battery and the AC Adapter. 3. Remove the keyboard, see "Keyboard" on page 60.
14. Select None . 15. Save the changes, and exit the BIOS Utility menu. 16. Power off the computer. 17. Disconnect the AC Adapter. 18. Remove the keyboard. 19. Change DIP switch position (Pin 6) to "Check Pass- word Enabled" . 20. Put back the keyboard.
Hibernation mode: When in hibernation mode, the following occurs: The system status, RAM, VRAM, and setup data are stored on the hard disk. The system is powered off.
Checkout guide Use the following procedure as a guide for computer prob- lems. Note: The diagnostic tests are intended to test only IBM products. Non-IBM products, prototype cards, or modified options can give false errors and invalid system responses.
FRU, such as the flexible cable, has no problem by doing the following: a. Replace each peripheral FRU one at a time, and run the test again. b. If the peripheral FRUs have no problem, replace the main FRU itself. To see the FRU structure of each model, refer to “Product overview” on page 44.
DOS Shell Tech Support Form Battery Rundown View Test Log Print Log Save Log Full Erase Hard Drive Quick Erase Hard Drive Power systems checkout To verify the symptom of the power problem on the com- puter, do the following: 1.
If the voltage is not correct, replace the AC Adapter. If the voltage is within the range, do the following: Replace the DC-DC & BATT board. Replace the system board. If the problems still persist, go to “Undetermined Problems” on page 38.
1 2 3 4 5 6 7 Note: Signal lines, not used in these steps, are used for communications between the system and the battery. 3. First, discharge the battery, until the voltage is less than 10.8V (LiIon) or 9.6V (NiMH). Then, charge the battery for 30 minutes.
Symptom-to-FRU Index The Symptom-to-FRU Index lists the symptoms and errors and the possible causes. The most likely cause is listed first. Note: Perform the FRU replacement or actions in the sequence shown in the FRU/Action columns. If a FRU does not solve the problem, put the original part back in the computer.
Error Code Message FRU/Action in Sequence 072 CMOS Checksum Error 1 Enter BIOS Utility and execute "Load Setup Default Settings"; then reboot the system. 110 Incorrect Password Specified. System Halted 1 Set SWZ1 Pin 6 (Check Password) to "0".
Symptom/Error FRU/Action in Sequence Unreadable LCD screen. Missing pels in char- acters. Abnormal screen Wrong color dis- played. Reseat LCD connector Check LCD inverter ID LCD FPC ASM LCD inverter LCD System board LCD has extra hori- zontal or vertical lines displayed.
Symptom/Error FRU/Action in Sequence The system doesn't power on. Go to “Power systems checkout” on page 30. AC Adapter Battery DC/DC & Charge board System board The system doesn't power off. Go to “Power systems checkout” on page 30.
PC Card (PCMCIA)-Related Symptoms Symptom/Error FRU/Action in Sequence System cannot detect the PC Card (PCMCIA) PC Card (PCMCIA) slots assembly System board PCMCIA slot pin is damaged. PC Card (PCMCIA) slots assembly Power Management-Related Symptoms Symptom/Error FRU/Action in Sequence The system doesn't enter hibernation mode.
Symptom/Error FRU/Action in Sequence Printer problems. Run printer self-test. Printer driver Printer cable Ensure that "Parallel Port" in the "Onboard Devices Config- uration" menu of the BIOS Utility is correctly set.
2. Check the cables, wires, and connectors for short cir- cuits and open circuits. Visually check them for damage. If any problems are found, replace the FRU.
Locations Front View 1. LCD latches 2. Keyboard Light (available on select models only) 3. LCD 4. Speakers 5. Keyboard Light switch (available on select models only) 6. Status indicators 7. CD-ROM or DVD-ROM drive 8. CD-ROM/DVD-ROM drive activity indicator 9.
1 12 13 14 15 16 17 18 19 20 21 23 24 25 26 1 3 4 4 5 6 22 7 11 10 9 8 2 Note: 15" LCD has different locations of speakers, micro- phone and status indicator. The speakers are located in the back of LCD. Microphone and status indicator are moved to the main unit.
2. Mouse/keyboard (PS/2) connector 3. Telephone connector 4. Serial connector 5. Parallel connector 6. Security keyhole 7. Universal serial bus (USB) connector 8. External monitor connector 9. TV-out (S-video) jack 10. PC Card slots 11. PC Card eject buttons 12.
Switch Locations There are two switches found on the system board. Refer to the figure below on how to set these switches. English Japanese German P i n 3 P i n 4 P i n 5 Boot Block Disabled Boot Bloc.
Product overview The following shows an overview of the system features. Note: The table below applies to the models in Group-A (See the 2621 model table on page iii.
Note: The table below applies to the models in Group-B (See the 2621 model table on page iii.) Feature Description AC Adapter 56–Watt type Feature Description Processor Intel** Celeron** processor 4.
Status indicators: The system-status indicators on the computer show the current status of your computer by their on or off states and colors (green and orange).
Symbol Color Meaning (1) Battery status Green Enough battery power remains for operation. Blinking orange The battery pack needs to be charged Orange The battery pack is being charged. (2) Standby mode Green The computer is in standby mode Blinking green The computer is entering or resuming from hibernation mode.
FRU tests: The following table shows the applicable test for each FRU using PC-Doctor. FRU Applicable test System board 1. CPU/Coprocessor ( Diagnostics ) 2. System board ( Diagnostics ) Power Battery ( Diagnostics ) LCD unit 1. Video Adapter ( Diagnostics ) 2.
FRU Applicable test Memory 1. If a DIMM is installed, remove it and run Memory Test-Quick ( Diagnostics ) 2. If the problem does not recur, replace the DIMM and run the test again. 3. If the test does not detect the error, run Memory Test-Full ( Diagnostics ) Fan 1.
FRU removals and replacements This section contains information about removals and replacements. Do not damage any parts. Only certified and trained personnel should service the computer. The arrows in this section show the direction of move- ment to remove a FRU, or to turn a screw to release the FRU.
An electrostatic discharge (ESD) strap (P/N: 6405959) must be used to establish personal grounding. Battery assembly 1 3 2 Note: When install a new battery pack, push the battery in and lock it. No need to repeat step 1 and 2. Warning Battery packs are capable of delivering high currents for a significant amount of time.
2 5 3 4 Step Size (Quantity) Color Torque 1 M2.5 x 6L (2) Black 3.2 kgf-cm 52 ThinkPad i Series 1400/1500 HMM.
6 Note: The FPC is connected to the system board by the other end. When removing the CD player panel and CD player control board, release the FPC with caution. Hard disk drive assembly “Battery assembly” on page 51 “CD player panel and CD player control board” on page 51 Warning Do not drop or apply any shock to the hard disk drive.
Hard disk drive kitting pack “Battery assembly” on page 51 “CD player panel and CD player control board” on page 51 “Hard disk drive assembly” on page 53 1 2 Memory cover and memory card “Battery assembly” on page 51 2 1 Memory co ver Step Size (Quantity) Color Torque 1 M3 x 4L (2) Silver 3.
Note: The screw does not separate from the memory cover. To install the memory card: With the notched end of the memory card toward the right side of the socket, insert the memory card, at an angle of approximately 20°, into the socket; then press it firmly.
1 3 2 When reinserting the card, reverse the procedures above. Middle cover and launch key assembly “Battery assembly” on page 51 1 56 ThinkPad i Series 1400/1500 HMM.
2 3 Optional customerized sheet P ower butto n 5 4 6 Step Size (Quantity) Color Torque 1 M2 x 4L (2) Silver 1.6 kgf-cm ThinkPad i Series 1400/1500 57.
7 8 9 Tu r n o v e r Stick Step Size (Quantity) Color Torque 3 M2.5 x 3.5L (2) Black 3.2 kgf-cm 58 ThinkPad i Series 1400/1500 HMM.
Notes: 1. Adjust the LCD module to the widest angle. Be careful not to scratch the surface of the middle cover. 2. Turn the middle cover and launch key assembly upside down when removing the FFC. 10 CAUTION: There is a FFC connected to the middle cover.
Keyboard “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 1 2 3 4 5 6 7 Large green FPC Small green FPC Y ellow FPC Note: Make sure the FPC finger side is facing outwards, when inserted.
Notes: 1. When replacing the keyboard, make sure that the 3 cables are clean and insert them directly into the con- nectors, making sure they make contact with the bottom of the connector.
4 CD-ROM/DVD-ROM assembly “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “Upper heat sink” on page 61 1 CAUTION: When the CD-ROM/DVD-ROM assembly is removed, the machine is unstable.
1 2 3 4 Caution Do not disassemble the CD-ROM; there are no user adjustments or serviceable parts inside. The use of controls, adjustments or performing procedures other than those specified may result in hazardous radiation exposure. The CD-ROM is a sensitive electronic device, handling should be cautious.
1 2 Step Size (Quantity) Color Torque 1 M2 x 4L (4) Silver with washer head 1.6 kgf-cm 64 ThinkPad i Series 1400/1500 HMM.
3 Note: Before removing and replacing the PCMCIA holder, make sure that the PCMCIA cards are removed. CAUTION: When removing the PCMCIA holder, pull them up at an angle.
4 3 2 Backup battery “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “Upper heat sink” on page 61 Step Size (Quantity) Color Torque 2 M2 x 12L (2) Silver 1.6 kgf-cm 4 M2.
Safety Notice 4 Translation in "Safety Notices: Multilingual Trans- lations" section: The backup battery is a lithium battery and can cause a fire, an explosion, or severe burns. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water.
3 5 4 Step Size (Quantity) Color Torque 1 M2.5 x 6L (4) Black 3.2 kgf-cm 2 M2.5 x 3.5L (2) Black 3.2 kgf-cm 68 ThinkPad i Series 1400/1500 HMM.
7 6 F ragile CAUTION: The upper cover has several latches. When removing the upper cover from the bottom cover, gently release these latches, then raise the side of the uppoer cover facing the palm rest to remove it. Be careful not to break the latches.
2 3 Fan assembly “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “Upper heat sink” on page 61 “CD-ROM/DVD-ROM assembly” on page 62 “LCD assembly” on page 65 “Keyboard bezel” on page 67 Step Size (Quantity) Color Torque 1 M2.
1 3 2 DC-DC charger board “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “Upper heat sink” on page 61 “CD-ROM/DVD-ROM assembly” on page 62 “LCD assembly” on page 65 “Keyboard bezel” on page 67 1 2 Step Size (Quantity) Color Torque 2 M2.
System board “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “Upper heat sink” on page 61 “LCD assembly” on page 65 “Keyboard bezel” on page 67 “Fan assembly” on page 70 “DC-DC charger board” on page 71 1 3 2 4 Notes: 1.
Bottom case “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “Upper heat sink” on page 61 “CD-ROM/DVD-ROM assembly” on page 62 “LCD assembly” on page 65 “Keyboard bezel” on page 67 “System board” on page 72 LCD bezel assembly (12.
2 2 3 9 4 7 6 8 5 Note: When removing the LCD, take note of the following: Be careful not to scratch the LCD cover when removing the screw covers. The LCD front cover has several latches. Release these latches; then remove the LCD cover. Be careful not to break these latches.
1 2 3 2 10 4 8 9 5 6 7 Note: When removing the LCD, take note of the following: Be careful not to scratch the LCD cover when removing the screw covers. The LCD front cover has several latches. Release these latches; then remove the LCD cover. Be careful not to break these latches.
Gently push the two hooks outward to remove the LCD front cover. LCD bezel assembly (14.1") “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “LCD assembly” on page 65 1 2 3 2 Step Size (Quantity) Color Torque 2 M2.
4 8 9 7 5 6 10 Note: When removing the LCD, take note of the following: Be careful not to scratch the LCD cover when removing the screw covers. The LCD front cover has several latches. Release these latches; then remove the LCD cover. Be careful not to break these latches.
2 3 Right speak er Left speak er Microphone 5 4 6 LED board (13.0") “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “LCD assembly” on page 65 “LCD bezel assembly (13.
3 2 Right speak er Left speak er Microphone 5 4 6 LED board (14.1") “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “LCD assembly” on page 65 “LCD bezel assembly (14.
3 2 4 6 5 Light Right speak er Left speak er Microphone LCD inverter (12.1") “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “LCD assembly” on page 65 “LCD bezel assembly (12.
4 2 3 LCD inverter (13.0") “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “LCD assembly” on page 65 “LCD bezel assembly (13.0")” on page 74 2 1 3 4 LCD inverter (14.
1 2 4 3 Cable assembly of microphone (12.1") “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “LCD assembly” on page 65 “LCD bezel assembly (12.1")” on page 73 “LED board (12.
Cable assembly of microphone (14.1") “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “LCD assembly” on page 65 “LCD bezel assembly (14.1")” on page 76 “LED board (14.
1 Step Size (Quantity) Color Torque 1 M3 x 5L(3) Silver 3.2 kgf-cm 84 ThinkPad i Series 1400/1500 HMM.
3 2 5 4 LCD bracket hinge assembly, speaker assembly and LCD rear cover assembly (13.0") “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “LCD assembly” on page 65 “LCD bezel assembly (13.
“LED board (13.0")” on page 78 “LCD inverter (13.0")” on page 81 “Cable assembly of microphone (13.0")” on page 82 1 LCD bracket hinge assembly, speaker assembly, keyboard light, and LCD rear cover assembly (14.
“Cable assembly of microphone (14.1")” on page 83 1 2 3 4 Step Size (Quantity) Color Torque 1 M2.5 x 6L(2) Black 3.2 kgf-cm 2 M2 x 4L(1) Silver 1.
LCD FPC assembly (12.1") “Battery assembly” on page 51 “Middle cover and launch key assembly” on page 56 “Keyboard” on page 60 “LCD assembly” on page 65 “LCD bezel assembly (12.1")” on page 73 “LED board (12.
“LCD bezel assembly (14.1")” on page 76 “LED board (14.1")” on page 79 “LCD inverter (14.1")” on page 81 “Cable assembly of microphone (14.1")” on page 83 “LCD bracket hinge assembly, speaker assembly, keyboard light, and LCD rear cover assembly (14.
Parts list (ThinkPad i Series 1400/1500) 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 18 2 2-a Note: The table below applies to the models in Group-A (See the 2621 model table on page iii.) No. Description FRU No. 1 Middle Cover & Launch Key ASM 14.
No. Description FRU No. Middle Cover & Launch Key ASM 14.1" (for Japan) 08K6054 Middle Cover & Launch Key ASM 12.1"/13.0" 08K5869 Middle Cover & Launch Key ASM 12.
No. Description FRU No. HDD Module Assy. 8.1 GB (IBM) 05K9176 Kitting, HDD (HDD adapter bracket SCR) 08K5861 20 RTC Battery 11J8591 21 FPC Cable Group (FPCs of CD-ROM, FDD, EZ Launch, CD-Play) 27L0498.
Note: The table below applies to the models in Group-B (See the 2621 model table on page iii.) No. Description FRU No. Miscellaneous Kit (for Japan) Right Hinge Cap 12.1"/13.0" 12.1" LCD FPC Holder 12.1" Top Bracket * 2 Right Hinge Cap 14.
No. Description FRU No. 3 Upper Heatsink 08K5868 4 Keyboard Bezel (IBM Logo, Lid SW, Bracket Screw, PCMCIA Shutter) 08K5918 Keyboard Bezel (IBM Logo, Lid SW, Bracket Screw, PCMCIA Shutter) (for Japan).
No. Description FRU No. CD Control Card 08K3405 Miscellaneous Kit Right Hinge Cap 12.1"/13.0" Right Hinge Cap 14.1" Rubber Foot * 4 PCMCIA Screw Cover * 4 Modem Cover Mylar Film CD-Player Panel Mylar Screw Cushion for LCD Bezel * 2 Screw Cap for LCD Bezel Screw Mylar for Rear Cover * 4 12.
No. Description FRU No. Screw Kit WAFER MYLO M2.5*3.5LB-ZN Black PAN NYLOK M2.5*6LB-ZN Black PAN NYLOK M2.5*10LB-ZN Black MACH PH M2*8LB-ZN Pan Black MACH PAN M2*10L NI Silver M2*4 WAFER NI Silver M2*.
LCD FRU 12.1-inch SVGA TFT 1 3 3 5 5 6 7 8 9 4 4 11 2 10 Note: The table below applies to the models in Group-A (See the 2621 model table on page iii.) No. Description FRU No. 1 LCD BEZEL ASM 12.1" 08K5849 2 12.1" TFT LCD 08K5844 3 LCD Bracket-Hinge 12.
Note: The table below applies to the models in Group-B (See the 2621 model table on page iii.) No. Description FRU No. 6 12.1" LCD FPC Assy. 27L0494 7 Cable Asm. of Microphone & Key- board LED Light 27L0497 Cable Asm. of Microphone & Key- board LED Light (for Japan) 27L0511 8 LCD Rear Cover ASM 12.
13.0-inch SVGA HPA 1 2 3 4 5 4 2 3 10 6 7 8 9 11 Note: The table below applies to the models in Group-A and B (See the 2621 model table on page iii.) No. Description FRU No. 1 LCD BEZEL ASM 13.0" 08K5853 LCD BEZEL ASM 13.0" (for Japan) 08K6051 2 Misc.
No. Description FRU No. 7 LCD Inverter 12.1"/13.0" 10L1380 8 Cable Asm. of Microphone & Key- board LED Light 27L0497 Cable Asm. of Microphone & Key- board LED Light (for Japan) 27L0511 9 LCD Rear Cover ASM 13.0" HPA 08K5852 LCD Rear Cover ASM 13.
14.1" XGA TFT 1 9 3 4 4 5 6 7 7 8 10 2 2 Note: The table below applies to the models in Group-A (See the 2621 model table on page iii.) No. Description FRU No. 1 LCD BEZEL ASM 14.1" 08K5856 LCD BEZEL ASM 14.1" (for Japan) 08K6050 2 LCD Bracket-Hinge 14.
Note: The table below applies to the models in Group-B (See the 2621 model table on page iii.) No. Description FRU No. 7 Cable ASM of Microphone & Key- board LED Light 27L0497 Cable ASM of Microphone & Key- board LED Light (for Japan) 27L0511 8 LCD Rear Cover ASM 14.
Keyboard No. Description FRU No. LCD Rear Cover ASM 14.1" TFT (NEC LCD) 08K6275 LCD Rear Cover ASM 14.1" TFT (NEC LCD) (for Japan model) 08K6385 9 Misc. Right Hinge Cap 14.1" (for worldwide) 08K6604 Misc. Right Hinge Cap 14.1" (for Japan) 08K6592 10 LED BD 10L1443 LG/IBM Logo Kit 08K5860 Description Vendor FRU No.
Common parts list Tools Miscellaneous Modem cable Description Vendor FRU No. Keyboard JAPANESE ALPS 02K5070 Keyboard TRAD. CHINESE ALPS 02K5071 Keyboard ITALIAN ALPS 02K5072 Keyboard SPANISH ALPS 02K5073 Keyboard SWISS ALPS 02K5074 Keyboard PORTUGUESE ALPS 02K5075 Keyboard BELGIAN ALPS 02K5076 Keyboard LA SPANISH ALPS 02K5094 Description FRU No.
Description FRU No. Modem cable (Portugal) 27L0447 Modem cable (US/C, JPN, Twn, APN, LA, Brz) 27L0465 Modem cable (Australia) 27L0467 ThinkPad i Series 1400/1500 105.
AC adapter Power cords: IBM power cords for a specific country are usually available only in that country. For 2–pin power cords: For 3–pin power cords: Note: The grounded adapter is required for full MPRII compliance. If a 3–pin power cord came with your computer, see “Safety Information” on page 11.
IBM power cord part number Used in these countries or regions 76H3524 Abu Dhabi, Albania, Antigua, Bahrain, Brunei, Dubai, Fiji, Hong Kong, India, Ireland, Kenya, Kuwait, Malaysia, Nigeria, Oman, Qata.
Product overview The following shows an overview of the system features. Feature Description Processor Intel** Pentium** III processor 500 MHz —or— Intel** Celeron** processor 500 MHz Bus architec.
Status indicators: The system-status indicators on the computer show the current status of your computer by their on or off states and colors (green and orange).
2 1 Symbol Color Meaning (1) Battery status Green Enough battery power remains for operation. Blinking orange The battery pack needs to be charged Orange The battery pack is being charged. (2) Standby mode Green The computer is in standby mode Blinking green The computer is entering or resuming from hibernation mode.
Symbol Color Meaning (5) Caps lock Green Caps Lock mode is enabled. All alphabetic characters (A-Z) are entered in capital letters without the Shift key being pressed. You enable or disable the Caps Lock mode by pressing the Caps Lock key. (6) Scroll lock Green Scroll Lock mode is enabled.
FRU Applicable test TrackPont or Pointing device If the TrackPoint does not work, see if an external PS/2 mouse is connected to the mouse/keyboard connector and remove it. The TrackPoint is automat- ically disabled if an external PS/2 mouse is attached.
FRU removals and replacements This section contains information about removals and replacements of model types in Group-C III (15.0" TFT). For other model types in Group-C, please refer to Part I for removals and replacements. Do not damage any parts.
grounding by touching a ground point with one hand before touching these units. An electrostatic discharge (ESD) strap (P/N: 6405959) must be used to establish personal grounding. Battery assembly 1 3 2 Note: When install a new battery pack, push the battery in and lock it.
CD player panel and CD player control board 1 2 Step Size (Quantity) Color Torque 1 M2.5 x 6L (2) Black 3.2 kgf-cm ThinkPad i Series 1400/1500 115.
5 3 4 6 Note: The FPC is connected to the system board by the other end. When removing the CD player panel and CD player control board, release the FPC with caution.
Warning Do not drop or apply any shock to the hard disk drive. The hard disk drive is sensitive to physical shock. Incorrect handling can cause damage and permanent loss of data on the drive. Before removing the drive, have the user make a backup copy of all the information on the drive if pos- sible.
Memory cover and memory card “Battery assembly” on page 114 2 1 Memory co ver Note: The screw does not separate from the memory cover. To install the memory card: With the notched end of the memory card toward the right side of the socket, insert the memory card, at an angle of approximately 20°, into the socket; then press it firmly.
Modem cover and modem card “Battery assembly” on page 114 1 2 Note: The screw does not separate from the modem cover. To remove the modem card: 1. Disconnect the modem cable. 2. Press the release latches on both sides of the modem board. 3. Pull out the modem card.
Launch key assembly “Battery assembly” on page 114 1 2 3 Optional customerized sheet 120 ThinkPad i Series 1400/1500 HMM.
4 5 P ower butto n Notes: 1. Adjust the LCD module to the widest angle. Be careful not to scratch the surface of the middle cover. 2. Turn the middle cover and launch key assembly upside down when removing the FFC. 6 Step Size (Quantity) Color Torque 5 M2 x 4L (2) Silver 1.
CAUTION: There is a FFC connected to the middle cover. When removing the middle cover, release the FFC with caution. 7 Left hinge cap “Battery assembly” on page 114 “Launch key assembly” on page 120 1 2 Step Size (Quantity) Color Torque 1 M2.
Keyboard “Battery assembly” on page 114 “Launch key assembly” on page 120 “Left hinge cap” 1 2 3 4 5 6 7 Large green FPC Small green FPC Y ello w FPC Note: Make sure the FPC finger side is facing outwards, when inserted.
Notes: 1. When replacing the keyboard, make sure that the 3 cables are clean and insert them directly into the con- nectors, making sure they make contact with the bottom of the connector.
CD-ROM/DVD-ROM assembly “Battery assembly” on page 114 “Launch key assembly” on page 120 “Left hinge cap” on page 122 “Keyboard” on page 123 “Upper heat sink” on page 124 1 CAUTION: When the CD-ROM/DVD-ROM assembly is removed, the machine is unstable.
3 4 Caution Do not disassemble the CD-ROM; there are no user adjustments or serviceable parts inside. The use of controls, adjustments or performing procedures other than those specified may result in hazardous radiation exposure. The CD-ROM is a sensitive electronic device, handling should be cautious.
1 2 Step Size (Quantity) Color Torque 1 M2 x 4L (4) Silver with washer head 1.6 kgf-cm ThinkPad i Series 1400/1500 127.
3 4 Note: Before removing and replacing the PCMCIA holder, make sure that the PCMCIA cards are removed and the eject levers are sticking out. CAUTION: When removing the PCMCIA holder, pull them up at an angle. It cannot be removed when pulled straight up.
2 3 4 5 6 7 9 8 Step Size (Quantity) Color Torque 6 M2 x 12L (2) Silver 1.6 kgf-cm Step Size (Quantity) Color Torque 7 M2.5 x 6L (1) Black 3.2 kgf-cm ThinkPad i Series 1400/1500 129.
LED board assembly and Cable assembly of microphone “Battery assembly” on page 114 “Launch key assembly” on page 120 “Left hinge cap” on page 122 “Keyboard” on page 123.
Safety Notice 4 Translation in "Safety Notices: Multilingual Trans- lations" section: The backup battery is a lithium battery and can cause a fire, an explosion, or severe burns. Do not recharge it, remove its polarized connector, disassemble it, heat it above 100°C (212°F), incinerate it, or expose its cell contents to water.
Memor y cover 1 2 3 132 ThinkPad i Series 1400/1500 HMM.
5 4 6 7 CAUTION: The upper cover has several latches. When removing the upper cover from the bottom cover, gently release these latches, then raise the side of the uppoer cover facing the palm rest to remove it. Be careful not to break the latches. Step Size (Quantity) Color Torque 1 M2.
Diskette drive assembly “Battery assembly” on page 114 “Launch key assembly” on page 120 “Left hinge cap” on page 122 “Keyboard” on page 123 “Upper heat sink” o.
3 Fan assembly “Battery assembly” on page 114 “Launch key assembly” on page 120 “Left hinge cap” on page 122 “Keyboard” on page 123 “Upper heat sink” on page 12.
“LCD assembly” on page 128 “LED board assembly and Cable assembly of microphone” on page 130 “Keyboard bezel” on page 131 “Fan assembly” on page 135 1 2 2 3 4 5 Step Size (Quantity) Color Torque 1 M2.5 x 3.5L (2) Black 3.
6 7 Notes: 1. When removing the system board from the bottom cover, gently raise the side of the system board facing the rear I/O ports; then pull out the system board. 2. When replacing the system board, align the power switch and power actuator. Make sure that the power switch operates correctly before securing the screws.
LCD bezel assembly (15.0") “Battery assembly” on page 114 “Launch key assembly” on page 120 “Left hinge cap” on page 122 “Keyboard” on page 123 “LCD assembly.
The LCD front cover has several latches. Release these latches; then remove the LCD cover. Be careful not to break these latches. Gently push the two hooks outward to remove the LCD front cover.
LCD bracket hinge assembly (15.0") “Battery assembly” on page 114 “Launch key assembly” on page 120 “Left hinge cap” on page 122 “Keyboard” on page 123 “LCD assembly” on page 128 “LCD bezel assembly (15.
“LCD inverter (15.0")” on page 139 “LCD bracket hinge assembly (15.0")” on page 140 1 2 Speaker assembly (15.0") “Battery assembly” on page 114 “Launch key.
Parts list (ThinkPad i Series 1400/1500) 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 20 21 22 18 2 2-a Note: The table below applies to the models in Group-C I, II, and IV. (See the 2621 model table on page iii.) No. Description FRU No. 1 Middle Cover & Launch Key ASM 14.
No. Description FRU No. Middle Cover & Launch Key ASM 14.1" (for Japan) 08K6054 Middle Cover & Launch Key ASM 12.1"/13.0" 08K5869 Middle Cover & Launch Key ASM 12.
No. Description FRU No. Kitting, HDD (HDD adapter, HDD bracket (for 9.5mm HDD), HDD bracket (for 12.5mm HDD), screw x 2)) 08K5861 20 RTC Battery 11J8591 21 FPC Cable Group 27L0498 22 Battery Assy (LiI.
No. Description FRU No. Miscellaneous Kit (for Japan) Right Hinge Cap 12.1"/13.0" 12.1" LCD FPC Holder 12.1" Top Bracket * 2 Right Hinge Cap 14.
13 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 19 20 21 22 23 24 25 Note: The table below applies to the models in Group-C III. (See the 2621 model table on page iii.
No. Description FRU No. 1 15.0" Hinge Cap ASM 08K6380 15.0" Hinge Cap ASM (for Japan model) 08K6391 2 Pointing Stick Caps 84G6536 3 Upper Heat sink 08K6695 4 Keyboard Bezel for 15.0" model (PCMCIA Shutter, Rubber Foot, Stand Foot, Battery Latch) 08K6277 Keyboard Bezel for 15.
No. Description FRU No. 19 Lid S/W ASM 08K5871 20 CD Control Panel 08K5876 21 HDD Module ASM 6.0 GB (IBM) 05K9250 HDD Module ASM 9.0 GB (IBM) 05K9252 HDD Module ASM 12.0 GB (IBM) 05K9254 HDD Module ASM 18.0 GB (IBM) 27L3428 Kitting, HDD (HDD adapter, HDD bracket (for 9.
LCD FRU No. Description FRU No. Miscellaneous Pack (for Japan) Right Hinge Cap 12.1"/13.0" 12.1" LCD FPC Holder 12.1" Top Bracket * 2 Right Hinge Cap 14.
12.1-inch SVGA TFT 1 3 3 5 5 6 7 8 9 4 4 11 2 10 Note: The table below applies to the models in Group-C I. (See the 2621 model table on page iii.) No. Description FRU No. 1 LCD BEZEL ASM 12.1" 08K5849 LCD BEZEL ASM 12.1" (for Japan model) 08K6388 2 12.
No. Description FRU No. 5 Speaker ASM (R,L) 08K6374 6 12.1" LCD FPC Assy. 27L0494 12.1" LCD FPC Assy. (for Japan model) 27L0536 7 Cable Asm. of Microphone 27L0497 Cable Asm. of Microphone (for Japan model) 27L0511 8 LCD Rear Cover ASM 12.1" TFT 08K5848 LCD Rear Cover ASM 12.
13.0-inch SVGA HPA 1 2 3 4 5 4 2 3 10 6 7 8 9 11 Note: The table below applies to the models in Group-C IV. (See the 2621 model table on page iii.) No. Description FRU No. 1 LCD BEZEL ASM 13.0" 08K5853 13.0" HPA LCD Bezel (for Japan) 08K6051 2 Misc.
14.1–inch XGA TFT 1 9 3 4 4 5 6 7 7 8 10 2 2 No. Description FRU No. 7 LCD Inverter 13.0" 10L1380 8 Cable Asm. of Microphone 27L0497 Cable Asm. of Microphone (for Japan) 27L0511 9 LCD Rear Cover ASM 13.0" HPA 08K5852 LCD Rear Cover ASM 13.
Note: The table below applies to the models in Group-C II. (See the 2621 model table on page iii.) No. Description FRU No. 1 LCD BEZEL ASM 14.1" 08K5856 LCD BEZEL ASM 14.1" (for Japan model) 08K6050 LCD BEZEL ASM 14.1" (NEC LCD) 08K6276 LCD BEZEL ASM 14.
15.0–inch XGA TFT 1 2 3 4 3 5 6 7 8 9 Note: The table below applies to the models in Group-C III. (See the 2621 model table on page iii.) No. Description FRU No. 1 LCD Bezel ASM 15.0" 08K6279 15.0" TFT LCD Bezel (for Japan model) 08K6390 2 LCD Inverter 15.
Keyboard No. Description FRU No. Cable ASM of Microphone & Key- board LED Light for 15.0" LCD (for Japan model) 27L0541 LG/IBM Logo Kit 08K5860 Description Vendor FRU No.
Common parts list Tools Miscellaneous Modem cable AC adapter Description Vendor FRU No. Keyboard PORTUGUESE ALPS 02K5075 Keyboard BELGIAN ALPS 02K5076 Keyboard LA SPANISH ALPS 02K5094 Description FRU No.
Power cords: IBM power cords for a specific country are usually available only in that country. For 2–pin power cords: For 3–pin power cords: Note: The grounded adapter is required for full MPRII compliance. If a 3–pin power cord came with your computer, see “Safety Information” on page 11.
IBM power cord part number Used in these countries or regions 76H3524 Abu Dhabi, Albania, Antigua, Bahrain, Brunei, Dubai, Fiji, Hong Kong, India, Ireland, Kenya, Kuwait, Malaysia, Nigeria, Oman, Qata.
Notices References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any refer- ence to an IBM product, program, or service is not intended to state or imply that only IBM product, program, or service may be used.
Trademarks The following terms are trademarks or service marks of IBM Corporation in the United States and other countries: IBM PS/2 ThinkPad TrackPoint TrackPoint IV The following terms are trademarks or service marks of other companies as follows: AMD-K6-2 Advanced Micro Devices, Inc.
.
IBM Part Number: 09N8606 Printed in U.S.A. Sð9N-1ð84-ð1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il IBM Series 1400 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del IBM Series 1400 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso IBM Series 1400 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul IBM Series 1400 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il IBM Series 1400, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del IBM Series 1400.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il IBM Series 1400. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo IBM Series 1400 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
