Manuale d’uso / di manutenzione del prodotto 937C COMBO del fabbricante Humminbird
Vai alla pagina of 91
93x_Man_531370-1_A - vs4.qxd 2/18/2005 11:11 AM Page 1.
i THANK Y OU! Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by designing and manufacturing top- quality , thoroughly reliable marine equipment. Y our Humminbird® is designed for trouble-free use in even the harshest marine environmen t.
ii T ABLE OF CONTENTS 900 Series™ Introduction 1 How the 900 Series™ W orks .................................................................................................................... 1 Single Beam Sonar ..................................
iii T ABLE OF CONTENTS The Menu System 44 Start-Up Options Menu 4 5 Normal Operation ............................................................................................................... ....................... 46 Simulator .................
T ABLE OF CONTENTS iv Alarms Menu T ab 66 Depth Alarm .................................................................................................................... ............................ 6 7 Fish ID Alarm .................................
1 900 SERI ES™ INTRODUCTION Y our 900 Series™ Ultra Wide Screen Fishing System comes in several dif ferent configurations. See the following list of pr oducts, all of which are co vered by this manual, to find your 900 Series™ configuration: NOTE : Only 93 7c DF Combo and 93 7c Combo models c ome with GPS and built -in cartography .
GPS AN D CART OGRAPHY (with 937c DF C ombo and 937c Combo models only) The 937c DF Combo and 93 7c Combo models use GPS and sonar to det ermine your position, display it on a grid, and provide detailed underwater information. The Global Positioning Syst em (GPS) is a satellite navigation system designed and maintained by the U.
3 AC CESSORY BUS Use the Accessory Bus to expand the functionality of your 900 Series™. Accessories plug directly into the 900 Series™, enabling Advanced features suc h as W eatherSense® and the SmartCast® Wireless Sonar Link.
Inside the boat there is often a c hannel or conduit used for other wiring, this can be used to rout e cables. Be sure to route the cable as far as practical from the an tenna cable of VHF radios or tachometer cables to reduce the possibility of in terference.
5 1. Place the control head in to the gimbal brack et. Make sure that the straight side of the gimbal arm is against the back side of the c ontrol head. 2. Place a 1" (25 mm) diameter black washer on the gimbal knob and then thr ead the knob and washer into the housing.
5. Set the gimbal brack et aside and drill the four mounting screw holes using a 5 /32" (4.0 mm) drill bit. 6a. If the cables must pass through a hole directly beneath the mounting brac ket, mark and drill an additional 1" (25 mm) hole centered between the f our mounting holes.
7 9 . While holding cables in place in the cable collector insert, thread the cables through the slot in the bot tom of the cable collector cover , line up the cable collector insert and cover , then slide the cover into place on the insert. NOTE: The tab on the Cable C ollector insert goes into the slot on the c over .
IN-DASH MOUNTI NG THE CONTROL HEAD If you are in- dash mounting the control head, start by placing the components on the surfaces where you intend to install them befor e installation. Make sure that the surfaces you have chosen provide adequate pr otection from wave shock, and that all cables can reach the c ontrol head.
9 7 . While holding cables in place in the cable collector insert, thread the cables through the slot in the bot tom of the cable collector c over , line up the cable collector insert and cover , then slide the c over into place on the insert. NOTE: The tab on the cable c ollector insert goes into the slot on the cover .
CONNECTING TH E CONTROL HEAD POW ER CABLE TO THE BOA T A 6' (2 m) long power cable is included to supply power to the c ontrol head. Y ou may shorten or lengthen the cable using 18 gauge multi- stranded copper wire. CAUTION: Some boats have 24 or 36 V olt electric systems, but the con trol head MUST be connected to a 12 VDC power supply .
11 TRANSOM TRANSDUCER I NS T ALLA TION If you will be installing a transom mounted transducer , use the pr ocedures in this section. Y ou will have one of two different types of transducer , based on whether you have a Single (931c or 937c C ombo) or a Dual (931c DF or 937c DF C ombo) frequency 900 Series™ contr ol head.
T o mount the transducer brack et to the boat (Single frequency unit): 1. Remove the transducer mounting templat e from this manual. See Appendix A for the Single Frequency Mounting T emplate. NOTE : Please mak e sure that you use the correct drill holes for the hull composition of your boat.
13 T o mount the transducer pivot as sembly to the brack et (Single frequency units ): 1. Insert the pivot/transducer assembly into the mounting brac ket. 2. Do not snap the assembly closed. 3. Apply marine- grade silicone sealant to the moun ting holes drilled into the transom.
T o mount the transducer brack et to the boat (Dual frequency unit): 1. Remove the transducer moun ting template from this manual. See Appendix B for the Dual Frequency T ransducer Mounting T emplate. 2. Hold the template on the transom of the boat in the location where the transducer will be installed.
15 T o mount the transducer pivot as sembly to the brack et (Dual frequency units ): 1. Slide the assembled transducer into the metal brac ket from the bot tom, aligning the large hole at the top of the brac ket with the hole in the pivot. 2. Insert the headed pin through the pivot holes in the brack et and pivot.
5. If access to the top moun ting hole is not possible due to the selected height of the transducer , fully tighten the two lower screws , then simply remove the headed pivot pin and the transducer assembly , and tight en the top screw , then reassemble.
17 INSI DE THE HU LL TRANSDUCER INST ALLA TION If you choose to moun t your transduc er inside the hull of your boat, perform the procedures in this section. The inside the hull mounting procedur e is identical regardless of what type of transducer you have (Single or Dual frequency).
4. Fill the hull with enough water to submerge the transducer body . Use a sand-filled bag or other heavy object to hold the transducer in position. The transducer cannot transmit through air , and the water purges any air from between the transducer and the hull, and fills any voids in the coarse fiberglass surface.
19 TROLLING MOTOR TRANSDUCER INS T ALLA TION If you want to install the transducer on a trolling mot or , use this procedure. Several styles of the transducer are compatible with trolling mot or mounting. If you have a trolling motor brac ket, refer t o the separate installation instructions that are included with the brack et.
NOTE: It may not always be possible t o get symmetrical fish arches and high speed depth readings at the same time. Due to the wide variety of boat hulls , however , it is not always possible to obtain high speed depth readings.
21 2. Screw on the receiver base to the st em first, making sure that the stem pipe does not protrude from the receiver base. This adds protection to the cable when pulling it thr ough the pipe stem. In addition to this , de- burr the pipe edges to reduce cable abrasion.
NO AC CESS UN DER MOUNTI NG LOCA TION Follow these steps to dec k mount the GPS receiver in a situation where you must rout e the cable to the side because there is no space for a cable underneath the mounting location. 1. Determine the best location, then test r oute the cable from the mounting location to the con trol head.
23 SPEED ACCESSOR Y INST ALLA TION NOTE : Y ou will only need to perform this procedure if you have a Speed-Only Sensor . The Speed accessory incorporates a paddlewheel-type speed sensor in a high-impact plastic housing. The module is intended for installation on the transom, and will work well on almost any boat.
Routing the speed cable to the c ontrol head: 1. Y ou may route the cable over the top of the transom, or drill a 5 /8” (16 mm) diameter hole in the transom directly above the module and above the waterline to r oute cable through. Use the cable clamps provided t o secure the cable to the transom of the boat.
25 TES TING TH E S YS TEM INS T ALLA TION Aft er you have completed the installation of the contr ol head, transducer , and any other accessories such as the GPS receiver , and have made all the cabling connections required, you must test the installation befor e using the system.
GETTING ST ARTED - USI NG Y OU R 900 SERI ES™ Y our 900 Series™ Fishing System user interface is easy to use. A c ombination of keys, differ ent views, and situation-specific, customizable menus allows you to contr ol what you see on the color display .
27 WHA T ’S ON TH E SONAR DISPLA Y The 900 Series™ can display a variety of useful information about the area under and adjacent t o your boat, including the following items: Sonar Color Bar - color spectrum indicating low to high sonar intensity returns, where red indicates high intensity and white indicates low intensity .
UN DERS T ANDING SONAR H IS T ORY It is important to understand the significance of the 900 Series™ display . The display does NO T show a literal 3- dimensional representation of what is under the water .
29 WhiteLine® highlights the strongest sonar r eturns in white, resulting in a distinctive outline. This has the benefit of clearly defining the bot tom on the display .
T o adjust the backlight or t o adjust the display background c olor , press the POWER/LIGHT k ey to access the Light and Backgr ound menu. Use the 4-W A Y Cursor key to select Light or Bac kground and then use the LEFT or RIGHT Cursor key t o change the set tings.
31 VIEW PRESET KEYS The VIEW PRESET keys are used to pr ogram your three favorite views for quick r etrieval. Instead of using the VIEW key to cycle through every view to find the one you want, you can program the VIEW PRESET keys t o display a specific view immediately .
VIEWS The views available on your 900 Series™ are: Sonar views: • Sonar View • Sonar Zoom View • Split Sonar View (937c DF Combo/ 931c DF models only) • Self T est View • Accessor y T est .
33 SONAR VIEW Sonar View presents a historical log of sonar r eturns. The most recent sonar returns are charted on the right side of the window; as new information is r eceived, the older information is moved across the display t o the left. A scale with Upper and Lower Depth Range readouts appears along the right edge of the Sonar View .
Freeze Frame - Pressing any arr ow on the 4-W A Y Cursor Control k ey will freeze the screen in the Sonar Zoom View and a cursor and cursor dialog bo x will be displayed on the screen. The cursor can be positioned on the display using the 4-W A Y Cursor Contr ol key to determine the depth of any sonar return.
35 BIRD’S EYE VI EW (937c DF C ombo and 937c Combo models only) Bird's Eye View shows a 3D perspective view of the track and the c hart land contour from a point above and behind the boat (the eye poin t). As the boat turns, the eye point moves to f ollow the boat.
CHART /BIRD’S EYE COMBO VIEW (937c DF C ombo and 937c Combo models only) Chart/Bird’ s Eye Combo View shows both the Chart and Bird’ s Ey e views in a combination split screen.
37 CHART /SONAR C OMBO VIEW (937c DF C ombo and 937c Combo models only) Chart/Sonar Combo View shows both the Chart and Sonar views in a combination split screen.
CHART ORIE NT A TION All the chart views allow you to choose the orientation of the c hart. When Nor th-Up orientation is selected, T rue Nor th is shown at the top of the display . In other words, objects located to the north of the boat are drawn above the boat.
39 Zooming: Use the Plus (+) key to Z oom In and the Minus (-) key t o Zoom Out showing the cartography at differen t scales. The scale is indicated on the left side of the display .
W A YPOINTS, ROUTES AND TRACKS (937c DF C ombo and 937c Combo models only) W aypoints are stor ed positions that allow you to mark areas of interest or navigation points. Y our 900 Series™ can store up to 3000 waypoints. Routes link two or more waypoints t ogether to create a path for navigation, and ar e used in trip planning.
41 Display the W aypoints Submenu: From any view , press the MENU key twice to display the Main Menu System, then use the RIGHT Cursor k ey to select the Navigation tab. Select Waypoin ts and press the RIGHT Cursor key to display the W aypoints submenu.
ADD A W A YPOI NT T ARGET OR TROLLI NG GRID (937c DF C ombo and 937c Combo models only) Add or Remove a W aypoint T arget: From the W aypoints submenu ( accessed from the Navigation main menu), select T arget and press the RIGHT Cursor key to display a list of waypoints.
43 SA VE, E DIT OR DELETE A ROUTE (937c DF C ombo and 937c Combo models only) Save the current route: While you are navigating , the current rout e can be saved. From the Navigation X -Press™ Menu, select Save Current Route and press the RIGHT Cursor key .
THE MEN U S YS TEM The menu system is divided int o easy-to-use menu modules. The main componen ts of the menu system are: Start-Up Options Menu: Press the MENU key during the power up sequence t o view the Start -Up Options menu. See Star t -Up Options Menu .
45 User Mode (Normal or Advanced): An Advanced Mode is pr ovided for users who desire the highest level of contr ol over the 900 Series™ and Normal Mode for users who desire greater simplicity and f ewer menu choices.
NORMAL OPERA TION Use Normal operation for on-the- water operation with a transducer connected. In addition, your 900 Series™ uses advanced transducer detection methods to determine if a transducer is connected.
47 S YS TEM S T A TUS Use System Status t o view system connections and to c onduct a unit self-test. E xit System Status by powering your 900 Series™ of f .
This view also reports the current position, local time and date, and other numeric information. The current GPS Fix T ype is reported as No Fix, 2D Fix, 3D Fix , or Enhanced. An Enhanced fix has been augmented using information fr om W AAS, EGNOS , or MSAS.
49 ACTIVE SIDE Active Side allows you to select which side of a Combo View will be active; key pr esses will only affect the active side of the screen. When a menu is displayed, the non-active side of the screen will be grayed out; at any other time, a green arrow will point t o the active side.
UPPER RANGE (Advanced: Sonar , Split Sonar and Active Sonar Side Views only) Upper Range sets the shallowest depth range that will be displayed on the Sonar , Split Sonar and Active Sonar Side Views.
51 CHART SPEED Chart Speed determines the speed at which the sonar information moves across the display , and consequently the amount of detail shown. A faster speed shows more information in the Sonar Views and is pref erred by most anglers; however , the sonar information moves acr oss the display quickly .
NA VIGA TION X -PRESS™ MEN U (937c DF C ombo and 937c Combo models only) The Navigation X -Press™ Menu provides access to the set tings most frequently used. Press the MENU key once while in the Bird's Eye View , the Chart or the Char t/Sonar C ombo or Chart/Bird’ s Eye C ombo View to access the Navigation X -Press™ Menu.
53 SA VE CU RRENT TRACK Save Current T rac k allows you to save the current track being displayed. A fter the current trac k is saved, a new current track is started. T o Sa v e C urr en t T r ack: 1. Highlight Save Current T rack on the Navigation X -Press™ Menu.
CANCEL NA VIGA TION (Only when navigating) Cancel Navigation discards the current r oute and exits Navigation Mode. This menu choice will only appear when you are curren tly navigating a route. This will not delete a previously-saved route. T o C anc el Na vig a tion: 1.
55 SONAR MENU T AB Press the MENU key twice to access the Main Menu System and then press the RIGHT Cursor key t o select the Sonar tab. NOTE: Menu choices will vary depending on system set tings such as whether the unit is set for Advanced User mode or what transducer is currently selected.
FISH ID+™ Fish ID+™ uses advanced signal processing to interpret sonar returns , and will display a Fish Symbol when very selective requirements are met. When a fish is det ected, a fish icon and its depth are displayed above the return that has been classified as being a fish.
57 REAL TIME SONAR (RTS®) WINDOW RTS® Window sets the RTS® Window t o either Wide or Narrow , or turns it off in the Sonar View . The RTS® Window always updates at the fastest rate possible and only displays returns that are within the transducer beam.
50 KHZ SENSITIVITY (Advanced, 93 7c DF Combo and 931c DF models only) 5 0 kHz Sensitivity changes the sensitivity of the 50 kHz beam. Incr easing the 50 kHz Sensitivity will display additional weak returns and decreasing the 50 kHz Sensitivity will display fewer weak returns.
59 MAX DEPTH (Advanced) Max Depth adjusts the maximum depth of operation. The performance of your 900 Series™ can be tuned to the maximum depth you will be fishing in by set ting the Max Depth. When a maximum depth is set, your 900 Series™ will not at tempt to acquire sonar data below that depth, thus increasing overall performance.
COL OR BAR Color Bar allows you to display or suppr ess the display of the color bar shown in the full screen Sonar View . T o c hang e the display of the C olor Bar: 1. Highlight C olor Bar on the Sonar Main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Control k eys to change the display of the color bar .
61 TRACKS Tr a c k s allows you to view the T racks submenu. T o view the T r ac k s Submenu: 1. Highlight T racks on the Navigation main menu. 2. Use the RIGHT 4-W A Y Cursor Contr ol keys to view the T rac ks submenu.
CHART ORIE NT A TION Chart Orientation allows you to select whether the views containing c harts should be drawn Nor th-Up or Course-Up. T o c hang e the Char t Orien ta tion set ting: 1. Highlight Chart Orientation on the Navigation main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to c hange the Chart Orientation set ting.
63 MAP DA TUM (Advanced) Map Datum allows you to change the map c oordinate system used by the 900 Series™ to match those of a paper map. T o c hang e the Map Da tum set ting: 1. Make sure you are in Adv anced User Mode, then highlight Map Datum on the Navigation main menu.
CHART MENU T AB (With 937c DF C ombo and 937c Combo models only) Press the MENU key twice to access the Main Menu System and then press the RIGHT Cursor key t o select the Char t tab. NOTE: Menu c hoices will vary depending on system set tings such as whether the unit is set for Advanced User mode.
65 LA T /LON GRID Lat/Lon Grid allows you to display or hide a grid showing latitude and longitude lines. T o c hang e the La t/L on Grid set ting: 1. Highlight Lat/Lon Grid on the Navigation main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to c hange the Lat/Lon Grid set ting.
SET MAP OFFSET (Advanced) Set Map Offset allows you to change the map of fset used by the 900 Series™. NOTE: The Map Offset will be applied to all maps and not just the map that requires the correction. The Map Offset should be cleared if a differen t map is to be used.
67 DEPTH ALARM Depth Alarm sounds when the depth becomes equal to or less than the menu set ting. T o c hang e the Depth Alarm set ting: 1. Highlight Depth Alarm on the Alarms main menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Contr ol keys to c hange the Depth Alarm set ting.
OFF COURSE ALARM (With 937c DF C ombo and 937c Combo models only) Off Course Alarm sounds when the boat has moved too far of f course based on the menu set ting when navigating. O ff Course Alarm allows you t o set how far the boat is allowed to move of f course before the Off C ourse Alarm will sound.
69 ALARM TONE Alarm T one selects the pitch of the alarm sound. A brief tone will be produced as you adjust the Alarm T one so that you can select the tone that you can hear best. T o c hang e the Alarm T one set ting: 1. Highlight Alarm T one on the Alarms main menu.
SETUP MEN U T AB From any view , press the MEN U key twice t o access the tabbed Main Menu System, then press the RIGHT cursor key until the Setup tab is selected. NOTE: Menu c hoices will vary depending on system set tings such as whether the unit is set for Advanced User mode and what accessories are at tached to the control head.
71 UN ITS - DIS T ANCE (With Speed input only) Units - Distance selects the units of measure for all distance-related readouts. T o c hang e the Units - Distance set ting: 1. Highlight Units - Distance on the Setup menu. 2. Use the LEFT or RIGHT 4-W A Y Cursor Control k eys to change the Units - Distance set ting.
TRIPLOG RESET (With Speed Input Only) T riplog Reset resets the T riplog to zero. The T riplog provides the following information: timer for elapsed time, distance traveled since last reset, and average speed. T o Reset T riplog: 1. Highlight Reset T riplog on the Setup menu.
73 are not navigating, there are four fixed info bo xes that show Depth, Heading, Position (Lat/Lon) and Speed. When you are navigating in the Bird's Ey e View , there are two columns of four bo xes. The first column shows Depth, Time T o Go (TTG), Position (Lat/Lon), and Speed.
DEPTH OFFSET (Advanced) Depth Offset will adjust the digital depth readout to indicate depth fr om the waterline or boats keel. Ent er a positive ver tical measurement fr om the transducer to the waterline to read the depth fr om the waterline. Enter a negative vertical measurement from the transducer to k eel to read the depth from the k eel.
75 DA YLIGHT SA VING TIME (Advanced, with 93 7c DF Combo and 937c Combo models only) Daylight Saving Time adjusts the time display to acc ount for local Daylight Saving Time. Selecting On adds one hour to the time display adjusted for your local time zone.
NMEA OUTPUT (Advanced) NMEA Output turns the NMEA output on or off . This menu choice is available only when in Advanced User Mode (see Setup Menu T ab: User Mode.
77 VIEWS MEN U T AB From any view , press the MEN U key twice t o access the tabbed Main Menu System, then press the RIGHT 4- W A Y Cursor Contr ol key until the Views tab is selected. This menu tab allows you to set the available views t o either hidden or visible in the view rotation.
TROUBLESHOOTING Before con tacting the Humminbird® Customer Resource Center , please read the following section. T aking the time to review these troubleshooting guidelines may allow you to solve a performance problem yourself , and theref ore avoid sending your unit back for r epair .
79 DISPLA Y PROBLEMS There are several main conditions or sources of possible in terference that may cause problems with the quality of the information displayed on the con trol head. Look in the following table for some sympt oms of display problems and possible solutions: Problem Possible Cause The control head loses power at high speeds.
FIN DING THE CAUSE OF NOISE Electrical noise usually affects the display with many black dots at high speeds , and high sensitivity readings. One or more of the f ollowing sources can cause noise or i.
81 1- YEAR LIMITED W ARRANTY W e warrant the original retail purchaser that products made by Humminbird® have been manufactured free from defects in materials and workmanship. This warran ty is effective for one year fr om the date of original retail purchase.
RETURN ING Y OUR UN IT FOR SERVICE Before sending your unit in for repair , please contact the factory , either by phone or by email, to obtain a Repair Authorization Number f or your unit. Please have your product model name and serial number available before calling the factory .
83 SPECIFICA TIONS Depth Capability 9 3 7c DF C ombo/ 9 31c DF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
APPEN DIX A T ransducer Mounting T emplate, Single frequency: XHS-9-20-T Place on bottom of hull Align with transom. DO NOT LET DEADRISE INTERSECT THIS LINE PLACE EITHER CORNER ON DEADRISE ANGLE TO P .
85 APPEN DIX B T ransducer Mounting T emplate, Dual frequency: XHS-9-DB- 74-T 93x_Man_531370-1_A - vs4.qxd 2/18/2005 11:12 AM Page 90.
Contact Humminbird® Contact the Humminbird® Cust omer Resource Center in any of the following ways: By T elephone (Monday - Friday 8:00 a.m. to 4:30 p.m. C entral Standard Time): 1-800- 633- 1468 By e-mail (typically we respond to your e-mail within three business days ): custserv@johnsonoutdoors.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Humminbird 937C COMBO è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Humminbird 937C COMBO - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Humminbird 937C COMBO imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Humminbird 937C COMBO ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Humminbird 937C COMBO, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Humminbird 937C COMBO.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Humminbird 937C COMBO. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Humminbird 937C COMBO insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
