Manuale d’uso / di manutenzione del prodotto Pool System del fabbricante Huffy
Vai alla pagina of 17
1 04/03 P/N 211984A © COPYRIGHT 2000 by HUFFY SPORTS Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-333 061 Internet Address: http://www.
2 P/N 211984A 04/03 WARNING FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. In the U.S.: 1-800-558-5234 and Canada Only: 1-800-284-8339 211239 1/98 See instruction manual for proper installation and maintenance.
04/03 P/N 211984A 3 200439 1 1/00 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forward until wheels engage with ground. 2. Move basketball system to desired location. 3. Carefully rotate basketball system upright. 4. Reattach ground restraint and check system for stability .
4 P/N 211984A 04/03 For more information on assembly, placement, proper use and maintenance, visit The American Basketball Council website at http://www.smarthoops.com. IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside.
04/03 P/N 211984A 5 Get to know the basic parts of your basketball system..... STRUTS BACKBOARD FRONT RIM WHEEL CARRIAGE ASSEMBL Y BASE POLE.
6 P/N 211984A 04/03 P ARTS LIST - (See Hardware Identifier) Item Qty . Part No. Description 1 1 206740 T ank (White) 2 1 200628 1 1.75 Long Axle Rod 3 2 226401 Wheel 4 1 900220 T op Pole Section (White) 5 1 201 190 Cap (White) 6 1 986102 Bottom Pole Section (White) 7 1 202822 Eyebolt, 3/8-16 x 3-3/4 Long 8 1 202820 Rod, 3/8 O.
04/03 P/N 211984A 7 HARDW ARE IDENTIFIER (BOL TS & STEEL RODS) HARDW ARE IDENTIFIER (NUTS & W ASHERS) HARDW ARE IDENTIFIER (PLASTIC CLIPS & SP ACERS) Item #14 (1) Item #12 (6) Item #10 (1).
8 P/N 211984A 04/03 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION (not actual size) SECTION A : ASSEMBLE THE BASE 9/16” and 1/2” 9/16” and 1/2” AND/OR This is what your system.
04/03 P/N 211984A 9 1. 1 Remove contents from t ank 4 6 TOP BOTTOM 5” (13 cm) 2. Correctly identify each pole section and mark indicated distance from ends with t ape as shown. TAPE (Not Supplied) 3. WOOD SCRAP IMPORT ANT! Center the alignment slot of bottom pole section (6) in the lower hole of top pole section (4) as shown.
10 P/N 211984A 04/03 2. Install rod (5) through holes in bottom pole section (4) and eyebolt (6). 7 8 6 8 7 4 6 10 6 8 7 3. 2 29 29 3 3 9 Install wheel axle (2) through wheel carriage (9). Inst all wheels (3) onto wheel axle (2) with spacers (29) as shown.
04/03 P/N 211984A 11 11 13 1 14 13 12 12 4. Secure tank strut s (13) to pole. Rotate non-secured ends of t ank struts (13) outward to mounting holes in tank as shown. 5. 13 13 1 Secure non-secured ends of tank strut s (13) to t ank as shown. Repeat for opposite side.
12 P/N 211984A 04/03 TOOLS REQUIRED FOR THIS SECTION HARDW ARE USED IN THIS SECTION SECTION B: ASSEMBLE THE BACKBOARD 1/2” 1/2” OR This is what your system will look like when you’ve finished th.
04/03 P/N 211984A 13 21 22 22 18 20 17 17 Mount brackets (20) and rim (18) to backboard and finger tighten as shown. NOTE: Final adjustments will be made in S tep 9. IMPORT ANT! For spring loaded rim assembly , refer to instructions included with rim hardware.
14 P/N 211984A 04/03 8. Install clip s. CLI P “ARM” CLIP “BODY” Insert one “arm” of clip into ram as shown. T wist “body” of clip slightly so that second “arm” slides over the top of the first “arm” as shown. Push in direction indicated by arrows.
04/03 P/N 211984A 15 Insert net into bottom of clip as shown. SIDE VIEW T wist net until it snap s into position. Net must be centered through clip. NET NETCLIP SIDE VIEW NET NETCLIP NET INST ALLA TION 9.
16 P/N 211984A 04/03 1. 28 26 27 26 Place assembled unit to desired location. Fill tank with water (30 gallons (1 14 liters)) or sand (360 lb. (163 kg)) and snap tank cap (28) in place.
04/03 P/N 211984A 17 1. SECTION E: APPL Y HEIGHT AND MOVING LABEL Apply Height and Moving label on pole as shown. 15 201261 3/99 1 3 2 MOVING SYSTEM 1. While holding pole, rotate basketball system forward until wheels engage with ground. 2. Move basketball system to desired location.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Huffy Pool System è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Huffy Pool System - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Huffy Pool System imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Huffy Pool System ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Huffy Pool System, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Huffy Pool System.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Huffy Pool System. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Huffy Pool System insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
