Manuale d’uso / di manutenzione del prodotto M732201 del fabbricante Huffy
Vai alla pagina of 21
1 01/06 ID# M732201 Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339 , For Europe: 00 800 555 85234 (Sweden: 009 555 85234 ), For Australia: 1-800-632 7921 Internet Address: http://www.
2 ID# M732201 01/06 Owner must ensure that all players know and follow these rules for safe operation of the system. W ARNING • DO NOT HANG on the rim or any part of the system including backboard, support braces or net.
01/06 ID# M732201 3 522730 06/05 MOVING SYSTEM HEIGHT ADJUSTMENT TO RESET OR REPOSITION BACKBOARD: 1. Grasp handle firmly and pull down to raise rim P AST highest position (above 10 feet). 2. While still holding handle firmly , CAREFULL Y lower rim to lowest position.
4 ID# M732201 01/06 IMPORT ANT! Remove all content s from boxes. Be sure to check inside pole sections; hardware and additional p art s are p acked inside. NOTICE T O ASSEMBLERS Adult Assembly Required. Dispose of ALL packaging materials promptly . As with all products, periodically inspect for loose small part s.
01/06 ID# M732201 5 Get to know the basic parts of your basketball system... RIM POLE BASE SUPPORT STRUT BACKBOARD FRONT VIEW BACKBOARD RIM POLE ELEVATOR ADJUSTMENT BASE SUPPORT STRUT BACK VIEW.
6 ID# M732201 01/06 P ARTS LIST - See Hardware Identifier NOTE: Hardware kit is designed for more than one style of basketball system. Not all hardware will be used.
01/06 ID# M732201 7 * You may have extra parts with this model. HARDW ARE IDENTIFIER (BOL TS & PINS) Item #12 (6) Item #13 (1) Item #15 (6) Item #14 (4) Item #9 (1) Item #18 (2) Item #38 (7) Item .
8 ID# M732201 01/06 Item #32 (1) Item #31 (1) HARDW ARE IDENTIFIER (STEEL SP ACERS & RODS) HARDW ARE IDENTIFIER (PLASTIC SP ACERS & CLIPS) HARDW ARE IDENTIFIER (OTHER) Item #44 (1*) Item #7 (1.
01/06 ID# M732201 9 ITEMS REQUIRED FOR THIS SECTION This is what your system will look like when you’ve finished this section. (2) 1/2” and (2) 9/16" Wrenches 9/16” 1/2” (2) Socket Wrenches and Socket s SECTION A: ASSEMBLE THE BASE 1. Correctly identify each pole section and mark indicated distance from ends with tape as shown.
10 ID# M732201 01/06 2. WOOD SCRAP (NOT SUPPLIED) 5 4 While maintaining alignment, bounce middle pole section (5) into top section (4) using a wood scrap as shown until the top pole no longer moves toward the pole identification sticker on the middle pole.
01/06 ID# M732201 11 4 5 6 WOOD SCRAP (NOT SUPPLIED) RODS SHOWN ARE FOR VISUAL REPRESENTATION OF ALIGNMENT AND ARE NOT SUPPLIED WITH THE HARDWARE Align dimple of middle pole section (5) into trough of bottom pole section (6) as shown.
12 ID# M732201 01/06 4. 5. Install wheel axle (2) through wheel carriage (19) and install wheels (3) onto wheel axle (2) with sp acers (17) as shown. Insert pole assembly into tank assembly as shown. Secure bottom pole (6) section to tank and wheel carriage as shown.
01/06 ID# M732201 13 11 12 12 10 6 6 10 1 13 6. Secure base struts (10) to pole using bolt (1 1), washers (12), and nut (13), as shown. Rotate the non-secured ends of base strut s (10) as shown. 7. Secure both base struts (10) to base using bolts (15), washers (12), and nuts (16).
14 ID# M732201 01/06 This is what your system will look like when you’ve finished this section. (2) 1/2”, (2) 9/16” and (2) 3/4” Wrenches 9/16” 1/2” 3/4” (2) Socket Wrenches and Socket s ITEMS REQUIRED FOR THIS SECTION SECTION B: A TT ACH THE BACKBOARD Assemble backboard brackets (29) using bolt s (14) and nuts (9) as shown.
01/06 ID# M732201 15 Fit spacer (44) into p awl (27). Then secure to brackets (29) using bolt (35) and nut (52) as shown. 3. 9 35 27 44 42 43 28 42 41 41 27 38 38 29 23 43 4. DO NOT OVER TIGHTEN! It is necessary for all parts to be installed properly for this mechanism to work safely and properly.
16 ID# M732201 01/06 5 . Secure pawl (27) in place with clevis pin (34) and washers (18) as shown. 6 . S tretch spring (40) into position with pliers from clevis pin (34) to board bracket (29). USE EYE PROTECTION WHEN INSTALLING SPRINGS. W ARNING! 43 36 16 32 29 7.
01/06 ID# M732201 17 38 43 43 42 42 38 22 4 42 41 41 38 43 43 8. 9. Attach upper elevator tubes (43) to backboard bracket s (29) using spacers (41) bolt (42) and nut (38) as shown. Support pole on sawhorse. Attach upper and lower elevator tubes (43) to upper pole section (4) using bolts (42) and nut s (38) as shown.
18 ID# M732201 01/06 42 33 33 47 38 42 33 47 38 10. Attach outer handle tube (47) to upper elevator tubes (43) using bolt (42) sp acers (33) and nut (38) as shown. Attach outer handle tube (47) to lower elevator tubes (43) using bolt (42) sp acers (33) and nut (38) as shown.
01/06 ID# M732201 19 47 48 48 46 11 . Slide inner handle tube (48) into outer handle tube (47) as shown. 12. Secure inner handle tube (48) to outer handle tube (47) using screws (20) as shown.
20 ID# M732201 01/06 13. Inst all Rim to Backboard A. Fit rim (21) securely into bracket (32) as shown. Allow T -bolt (36) to slip through center hole in rim (21). B. Install reinforcement bracket (31) onto T -bolt (36) as shown. C. Install spring (30) onto T -bolt (36) as shown.
01/06 ID# M732201 21 14. Roll the completed assembly to the desired playing area. Fill tank with 33 gallons of water . 15. Apply the height adjustment and moving label (25) to the front of the pole as shown. 24 24 10 ft. (3.05 m) 25 TWO CAPABLE ADULTS REQUIRED FOR THIS PROCEDURE.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Huffy M732201 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Huffy M732201 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Huffy M732201 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Huffy M732201 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Huffy M732201, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Huffy M732201.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Huffy M732201. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Huffy M732201 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
