Manuale d’uso / di manutenzione del prodotto PCLA8205B del fabbricante HP (Hewlett-Packard)
Vai alla pagina of 35
EtherExpress TM PRO/10+ ISA PCLA8205B Installation Guide.
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
1 Connecting to a Netware 3.12 Server Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt. 8 Insert Netware Client for DOS and Windows Disk 1 and execute “A:INSTALL.” 9 Change the settings to match the following and then option 6 to continue the installation.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Novell Netware 3.
1 Connecting to a Netware 3.12 Server Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on “Close” button, and files will copy.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
2 Connecting to a Netware 4.11 Server Windows for Workgroups Version 3.11 7 Remove the Intel drivers diskette and reboot the machine, and boot to a DOS prompt. 8 Insert Netware Client for DOS and Windows Disk 1 and execute “A:INSTALL.” 9 Change the settings to match the following and then option 6 to continue the installation.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Novell Netware 4.
2 Connecting to a Netware 4.11 Server Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description. (If you do not have the required information, contact your network administrator) 12 Click on “Close” button, and files will copy.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
Windows for Workgroups Version 3.11 8 After windows loads, open the “NETWORK” program group, and double- click the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box. 10 Click on the “Install Microsoft Windows Network:” option, and click “OK.
3 Connecting to a Windows NT Server 3.51 Windows for Workgroups Version 3.11 21 To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Microsoft Windows NT Server 3.
3 Connecting to a Windows NT Server 3.51 Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress PRO ISA Ethernet card and drivers disk Ver.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51 9 Select the “Network” icon, and click “YES” to install NT networking. 10 Insert the Windows NT Workstaion CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 3.51.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 Windows NT Workstation Version 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10 ISA ethernet card and drivers disk ver.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 9 Log onto the machine with dministrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” group and double-click the “Network” Icon.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0 27 After “Network has been installed on this computer” click on “Finish.
3 Connecting to a Windows NT Server 3.51 Windows NT Workstation Version 4.0.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 Requirements • HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed. • Intel EtherExpress ISA 10MBS Ethernet adapter card and drivers disk Ver.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 8 After windows loads, open the “NETWORK” program group, and double- click the “Network Setup.” 9 Select the “Networks” button in the “Network Setup” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows for Workgroups Version. 3.11 21 To complete the installation, click on “Restart Computer” button in the “Windows Setup” dialog box.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 Windows 95 SR2 Requirements • HP Vectra with Windows 95 SR2. • Intel EtherExpress PRO ISA ethernet card and drivers disk Ver. 2.3. • Driver Name: El90X.DOS Size: 45KB Date: 3/21/97 • Microsoft Windows NT Server 4.
4 Connecting to a Windows NT Server 4.0 Windows 95 SR2 10 Click “OK” to the “Network” dialog box to provide computer / work group names. 11 Specify your Computer Name, Workgroup, and Computer Description.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 Windows NT Workstation Version 3.51 Requirements • HP Vectra with Microsoft Windows NT Workstation 3.51 installed. • Intel EtherExpress PRO ISA Ethernet card and drivers disk Ver.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation Version 3.51 10 Insert the Windows NT Workstaion CD. 11 In the “Windows NT Setup”, set the path to your NT files, and click on the “Continue” button.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 Windows NT Workstation 4.0 Requirements • HP Vectra with Windows NT Workstation 4.0 Service Pack 3. • Intel EtherExpress PRO/10 ISA ethernet card and drivers disk ver. 3.5. Driver Name: OEMSETUP.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 9 Log onto the machine with dministrator privileges. (If you do not have the required information, contact your network administrator) 10 Click on “Start” and move to “Settings”, open the “Control Panel” group and double-click the “Network” Icon.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0 27 After “Network has been installed on this computer” click on “Finish. 28 To complete the installation, select “Yes” to reboot your computer.
4 Connecting to a Windows NT Server 4.0 Windows NT Workstation 4.0.
.
V ersion Number Intel10 Rev .1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HP (Hewlett-Packard) PCLA8205B è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HP (Hewlett-Packard) PCLA8205B - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HP (Hewlett-Packard) PCLA8205B imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HP (Hewlett-Packard) PCLA8205B ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HP (Hewlett-Packard) PCLA8205B, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HP (Hewlett-Packard) PCLA8205B.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HP (Hewlett-Packard) PCLA8205B. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HP (Hewlett-Packard) PCLA8205B insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
