Manuale d’uso / di manutenzione del prodotto F300 del fabbricante HP (Hewlett-Packard)
Vai alla pagina of 69
HP Deskj et F3 00 All-in - One s er i es Us er Guide.
HP Deskjet F300 All-in-One series User Guide.
© Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws.
Contents 1 HP All-in-One overview .. ...................... .................... .................... . ............ ...........3 The HP All-in-One at a glance............. .............. ............ ............................ .............3 Control panel buttons.
Prepare the HP All-in-One for shipment.... ............. ...................................... ........54 Pack the HP All-in-One.... . .................. .. ............................ .. ................. .................54 12 Technical information .
1 HP All-in-One overview You can make copies quickly and easily from the HP All-in-One without turning on your computer. You can also use the HP All-in-One to print and scan photos and text documents by using the software installed on your computer during the initial setup.
Control panel buttons Label Icon Name and Description 1 On : Turns the HP All-in-One on or off. The On button is lit when the HP All-in-One is powered on. The light blinks while performing a job. When the HP All-in-One is off, a minimal amount of power is still supplied to the device.
Label Icon Name and Description Tip From the control panel, you can specify up to nine copies of an original. However, if you connect the HP All-in-One to a computer, you can use the HP Photosmart Software to specify more.
The following table describes common situations and explains what the lights mean. Light status What it means All lights are off. The HP All-in-One is turned off. Press the On button to turn on the device. The On light and one of the Paper Type lights are on.
2 Find more information You can access a variety of resources, both printed and onscreen, that provide information about setting up and using the HP All-in-One. Sources of information Setup Guide The Setup Guide provides instructions for setting up the HP All-in- One and installing software.
● The Explore what you can do topic provides more information about the practical and creative things you can do with the HP Photosmart Software and the HP All-in-One. ● If you need further assistance or want to check for HP software updates, see the Troubleshooting and support topic.
3 Connection information The HP All-in-One comes equipped with a USB port so you can connect directly to a computer using a USB cable. You can also share your printer over an existing Ethernet network using a computer as a print server.
client , has access only to the print features. You must perform other functions from the host computer or from the control panel on the HP All-in-One. To enable printer sharing on a Windows computer ➔ Refer to the user guide that came with your computer or see the Windows onscreen Help.
4 Load originals and load paper You can load many different types and sizes of paper in the HP All-in-One, including letter or A4 paper, photo paper, transparencies, and envelopes.
Recommended papers for printing and copying If you want the best print quality, HP recommends using HP papers that are specifically designed for the type of project you are printing. If you are printing photos, for example, load HP Premium or HP Premium Plus photo paper in the input tray.
Load paper This section describes the procedure for loading different types and sizes of paper into the HP All-in-One for your copies or printouts. Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in a resealable bag.
Caution Make sure that the HP All-in-One is idle and silent when you load paper into the input tray. If the HP All-in-One is servicing the print cartridges or otherwise engaged in a task, the paper stop inside the device might not be in place. You could push the paper too far forward, causing the HP All-in-One to eject blank pages.
To load 10 x 15 cm ( 4 x 6 inch) photo paper with tab in the input tray 1. Remove all paper from the input tray. 2. Insert the stack of photo paper into the far-right side of the input tray with the short edge forward and the print side down. Slide the stack of photo paper forward until it stops.
Load other types of paper The following papers require extra attention to load them properly. Note Not all paper sizes and paper types are available with all the functions on the HP All-in-One. Some paper sizes and paper types can only be used if you are starting a print job from the Print dialog box in a software application.
years old. Labels on older sheets might peel off when the paper is pulled through the HP All-in-One, causing subsequent paper jams. 2. Fan the stack of labels to make sure none of the pages are sticking together. 3. Place a stack of label sheets on top of full-size plain paper in the input tray, label side down.
Chapter 4 18 HP Deskjet F300 A ll-in-One se ries Load originals and load paper.
5 Print from your computer The HP All-in-One can be used with any software application that allows printing. You can print a range of projects, such as borderless images, newsletters, greeting cards, iron-on transfers, and posters.
Stop a print job Although you can stop a print job from either the HP All-in-One or the computer, HP recommends you stop it from the HP All-in-One for best results. To stop a print job from the HP All-in-One ➔ Press Cancel on the control panel. If the print job does not stop, press Cancel again.
6 Use the copy features The HP All-in-One allows you to produce high-quality color and black-and-white copies on a variety of paper types. You can enlarge or reduce the size of an original to fit a specific paper size, adjust the copy quality, and make high-quality copies of photos, including borderless copies.
3. Press the Copies button to increase the number of copies up to a maximum of 9. Tip Use the software that you installed with the HP All-in-One to set the number of copies higher than 9. 4. Press Start Copy Black or Start Copy Color . In this example, the HP All-in-One makes six copies of the original 10 x 15 cm (4 x 6 inch) photo.
7 Use the scan features Scanning is the process of converting text and pictures into an electronic format for your computer. You can scan almost anything (photos, magazine articles and text documents) on the HP All-in-One.
Stop scanning To stop scanning ➔ Press Cancel on the control panel. Chapter 7 24 HP Deskjet F300 A ll-in-One se ries Scan.
8 Maintain the HP All-in-One The HP All-in-One requires little maintenance. Sometimes you might want to clean the glass and lid backing to remove surface dust and ensure that your copies and scans remain clear. You will also need to replace, align, or clean your print cartridges from time to time.
Clean the lid backing Minor debris can accumulate on the white document backing located underneath the lid of the HP All-in-One. To clean the lid backing 1. Turn off the HP All-in-One, unplug the power cord, and raise the lid. 2. Clean the white document backing with a soft cloth or sponge slightly moistened with a mild soap and warm water.
Work with print cartridges To ensure the best print quality from the HP All-in-One, you will need to perform some simple maintenance procedures. This section provides guidelines for handling the print cartridges and instructions for replacing, aligning, and cleaning the print cartridges.
Replace the print cartridges Follow these instructions when the ink level is low. Note When the ink level for the print cartridge is low, a message appears on your computer screen. You can also check the ink levels by using the software installed with the HP All-in-One.
1 Print cartridge slot for the tri-color print cartridge 2 Print cartridge slot for the black and photo print cartridges 4. Pull the print cartridge toward you out of its slot.
7. Slide the new print cartridge forward into the empty slot. Then gently push on the upper part of the print cartridge forward until it clicks into the socket. If you are installing the tri-color print cartridge, slide it into the left slot. If you are installing a black or photo print cartridge, slide it into the right slot.
Note If you remove and reinstall the same print cartridge, the HP All-in-One will not prompt you to align the print cartridges. The HP All-in-One remembers the alignment values for that print cartridge, so you do not need to realign the print cartridges.
To clean the print cartridges from the HP Photosmart Mac Software 1. Load letter, A4, or legal unused plain white paper into the input tray. 2. In the HP Photosmart Studio task bar, click Devices . The HP Device Manager win dow appears. 3. Make sure the HP All-in-One is selected in the Devices pop-up menu.
Note Do not remove both print cartridges at the same time. Remove and clean each print cartridge one at a time. Do not leave a print cartridge outside the HP All-in-One for more than 30 minutes. 4. Inspect the print cartridge contacts for ink and debris buildup.
Chapter 8 34 HP Deskjet F300 A ll-in-One se ries Maintain the HP All-in-One.
9 Order supplies You can order HP products, such as recommended types of paper and print cartridges, online from the HP website. ● Order paper, or other media ● Order print cartridges ● Order other supplies Order paper, or other media To order HP papers and other supplies, such as HP Premium Photo Papers or HP All- in-One Paper, go to www.
To find out the reorder number through the HP Photosmart Mac Software 1. In the HP Photosmart Studio task bar, click Devices . The HP Device Manager win dow appears. 2. Make sure the HP All-in-One is selected in the Devices pop-up menu. 3. From the Information and Settings pop-up menu, choose Maintain Printer .
10 Troubleshooting information This chapter contains troubleshooting information for the HP All-in-One. Specific information is provided for installation and configuration issues, and some operational topics. For more troubleshooting information, see the onscreen Help that came with your software.
Setup troubleshooting This section includes installation and configuration troubleshooting tips for some of the most common issues associated with hardware and software setup. Hardware setup troubleshooting Use this section to solve any problems you might encounter while setting up the HP All-in-One hardware.
www.h p. co m /support If prompted, choose your country/region, and then click Contact HP for information on calling for technical support. I connected the USB cable, but I am having problems using the HP All-in-One with my computer Solution You must first install the software that came with the HP All-in-One before connecting the USB cable.
Open the print cartridge door to access the print carriage area. Remove any objects that are blocking the print carriage, including any packing materials. Turn the HP All-in-One off and then turn it on again. ● Check that the HP All-in-One print queue is not paused (Windows) or stopped (Mac).
If the HP All-in-One and computer are not communicating with each other, try the following: Software installation troubleshooting If you encounter a problem during software installation, see the topics below for a possible solution. If you encounter a hardware problem during setup, see Hardware setup troubleshooting .
The minimum system checks screen appears (Windows) Solution Your system does not meet the minimum requirements to install the software. Click Details to see what the specific problem is, and then correct the problem before attempting to install the software.
I received a message that an unknown error has occurred Solution Try to continue with the installation. If that does not work, stop and then restart the installation, and follow the directions on the screen. If an error occurs, you might need to uninstall and then reinstall the software.
To uninstall from a Windows computer, method 1 1. Disconnect the HP All-in-One from your computer. Do not connect the HP All-in- One to your computer until after you have reinstalled the software. 2. Press the On button to turn off the HP All-in-One. 3.
To uninstall from a Windows computer, method 3 Note Use this method if Uninstall is not available in the Windows Start menu. 1. Insert the HP All-in-One CD-ROM into your computer’s CD-ROM drive and then start the Setup program. 2. Select Uninstall and follow the onscreen directions.
If paper does become jammed in your device, follow these instructions to clear the paper jam. Clear paper jams If the HP All-in-One has a paper jam, first check the rear door. If the jammed paper is not in the rear rollers, check the front door. To clear a paper jam from the rear door 1.
3. Close the print cartridge door. 4. Press Start Copy Black to continue the current job. Print cartridge troubleshooting If you are experiencing problems with printing, you might have a problem with one of the print cartridges. To troubleshoot print cartridges 1.
Chapter 10 48 HP Deskjet F300 A ll-in-One se ries Troubleshooting.
11 HP warranty and support This chapter provides warranty information as well as how to get support from the Internet, access your serial number and service ID, contact HP customer support, and prepare the HP All- in-One for shipment.
Warranty information A . Extent of limited warranty 1. Hewlett-Packard (HP) warrants to the end-user customer that the HP products specified above will be free from defects in materials and workmanship for the duration specified above, which duration begins on the date of purchase by the customer .
Get support and other information from the Internet To find support and warranty information, go to the HP website at www.hp.com/support . If prompted, choose your country/region, and then click Contact HP for information on calling for technical support.
To print a self-test report 1. Press and hold Cancel on the control panel. 2. While holding Cancel , press Start Copy Color . The self-test report prints, containing the serial number and service ID. Call in North America during warranty Call 1-800-474-6836 (1-800-HP invent) .
ww w .hp.com/support Aus trali a Centr al America & The Car ibbean Colomb ia (Bogotá) Colombia www.hp .com/support/ austr alia 0-800 - 70 9- 7751 (02) 6 910602 Méxi co (Ciudad de Méx ico) New Z ealand Pue rto R ico Sveri ge Méxi co www.
Prepare the HP All-in-One for shipment If after contacting HP Customer Support or returning to the point of purchase you are requested to send the HP All-in-One in for service, make sure you remove an.
If you do not have the original packaging materials, please use other adequate packaging materials. Shipping damage caused by improper packaging and/or improper transportation is not covered under the warranty. 2. Place the return shipping label on the outside of the box.
Chapter 11 56 HP Deskjet F300 A ll-in-One se ries HP warranty and support.
12 Technical information The technical specifications and international regulatory information for the HP All-in-One are provided in this section. System requirements Software system requirements are located in the Readme file.
Type Size JIS (B5): 182 x 257 mm Envelopes U.S. #10: 4.1 x 9.5 inches A2: 111 x 146 mm DL: 110 x 220 mm C6: 114 x 162 mm Transparency film Letter: 8.5 x 11 inches A4: 210 x 297 mm Photo paper 4 x 6 inches 4 x 6 inches, with tear-off tab 5 x 7 inches Executive: 7.
Print margin specifications Top (leading edge) Bottom (trailing edge) 1 Left and right margins Paper or transparency film U.S. (Letter, Legal, Executive) 1.8 mm (0.07 inches) 12.7 mm (0.5 inches) 6.4 mm (0.25 inches) ISO (A4, A5) and JIS (B5) 1.8 mm (0.
Copy specifications ● Digital image processing ● Up to 9 copies from original (varies by model) ● Fit to page Mode Print resolution (dpi) Scan resolution (dpi) 1 Best Black 600 x 600 600 x 2400 Color 1200 x 1200 2 600 x 2400 Fast Black 300 x 1200 600 x 1200 Color 600 x 300 600 x 1200 1 Maximum at 400% scaling.
Environmental product stewardship program This section provides information on protecting the environment; ozone production; energy consumption; paper use; plastics; material safety data sheets; and recycling programs. This section contains information about environmental standards.
HP inkjet supplies recycling program HP is committed to protecting the environment. The HP Inkjet Supplies Recycling Program is available in many countries/regions, and lets you recycle used print cartridges and ink cartridges free of charge. For more information, go to the following website: www.
For more information, contact the Product Regulations Manager, Hewlett-Packard Company, San Diego, (858) 655-4100. The user may find the following booklet prepared by the Federal Communications Commission helpful: How to Identify and Resolve Radio-TV Interference Problems.
HP Deskjet F300 All-in-One series declaration of conformity Chapter 12 64 HP Deskjet F300 A ll-in-One se ries Technical information.
Index Symbols/Numerics 10 x 15 cm photo paper load 14 specifications 57 4 x 6 inch photo paper, l o a d 14 A A4 paper, load 13 align print cartridges 30 B buttons, control panel 4 C cancel copy 22 print job 20 scan 24 cancel button 4 cartridges.
N number of copies copy 21 O on button 4 order paper 35 print cartridges 35 Setup Guide 36 software 36 User Guide 36 P paper choose 11 incompatible types 12 jams 17, 46 load 13 order 35 paper sizes 57.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HP (Hewlett-Packard) F300 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HP (Hewlett-Packard) F300 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HP (Hewlett-Packard) F300 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HP (Hewlett-Packard) F300 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HP (Hewlett-Packard) F300, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HP (Hewlett-Packard) F300.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HP (Hewlett-Packard) F300. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HP (Hewlett-Packard) F300 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
