Manuale d’uso / di manutenzione del prodotto DL380 del fabbricante HP (Hewlett-Packard)
Vai alla pagina of 50
Front View: Rear View: 1. Quick removal access panel 1. PCI slot 5 2. Intel Quad-Core Processor (Performance models include two processors) 2. PCI slot 6 3. PCI slot 4 3. Second Intel Quad-Core Processor 4. PCI slot 2 4. Eighteen slots: DDR3 Registered (RDIMM) or Unbuffered (UDIMM) memory 5.
Performance Models: HP Smart Array P410i/512 MB BBWC Controller (RAID 0/1/1+0/5/5+0) High Efficiency: HP Smart Array P410i/Zero Memory Controller (RAID 0/1/1+0) Available upgrades: 256MB, 512MB with B.
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Quad-Core Processors Intel® Xeon® Processor X5570 (2.
Memory Type DDR3 Registered (RDIMM) and Unbuffered (UDIMM) Standard (Performance Models) 12 GB (6 x 2 GB) PC3-10600R (DDR3-1333) Registered DIMMs Standard (Base Models) 6 GB (3 x 2 GB) PC3-10600R (DDR.
(Optional Secondary) Slots # Width ** Width Number * 4 PCIe Gen2 X8 X16 16 Full length, full height slot 5 PCIe Gen2 X4 X8 20 Half length, half height slot 6 PCIe Gen2 X4 X8 23 Half length, half height slot * Default bus assignment (in decimal).
4 PCIe Gen2 x16 x16 16 Full Length, Full Height slot Supports up to 225W; single wide cards only * Default bus assignment (in decimal). Inserting cards with PCI bridges may alter the actual bus assignment number ** Indicates the number of physical electrical lanes running to the connector.
Graphics Integrated ATI ES1000, 32MB video standard 16 bit color: maximum resolution of 1600 x 1200 32 bit color: maximum resolution of 1280 x 1024 NOTE: Maximum resolution available via iLO 2 remote console is 1280 x 1024. Form Factor Rack (2U); Height 3.
Technical Support and Update Service ensuring rapid access to HP support staff and proactive delivery of software updates. For more information about this service, please visit: http://www.
Security - Trusted Platform Module Trusted Platform Module option kit The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
Common Slot ProLiant It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for your needs. HP offers four Power Supply Options: 460Watts, Commo.
Rack Airflow Requirements Rack 10000 G2 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
HP Enterprise Configurator The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers.
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL380 under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure to order clusters.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section.
HP DL380 G6 Base Models Quad-Core Models HP DL380G6 E5540 491332-xx1 HP DL380G6 E5530 491324-xx1 HP DL380G6 E5520 491325-xx1 Processor(s) One of the following depending on Model (1) Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2) (1) Intel® Xeon® Processor E5530 (2.
HP DL380 G6 Entry Models Quad-Core Models HP DL380G6 E5504 491505-xx1 Processor(s) (1) Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800) Cache Memory 4MB (1 x 4MB) Level 3 cache M.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO product offerings and requirements.
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2), FIO 500087-L21 Intel® Xeon® Processor E5530 (2.40 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2), FIO 492237-L21 Intel® Xeon® Processor E5540 (2.
Step 3: Choose Additional Factory Integratable Options (only one of the following from each list unless otherwise noted) Controllers NOTE: If Additional Memory Cache Module or Controller is Required p.
Step 4: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Core Options and Additional Options" section below. QuickSpecs HP ProLiant DL380 Generation 6 Configuration Information - Factory Integrated Models DA - 13234 Worldwide QuickSpecs — Version 16 — 8.
NOTE: Some options may not be integrated at the factory. Contact your local sales representative for additional information. HP ProLiant DL380 G6 Unique Options HP StorageWorks RDX160 Removable Disk B.
Memory Registered DIMMs (RDIMMs) HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21 HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 HP 4GB 4Rx8 PC3-8500R-7 LP Kit 500660-B21 HP 8GB 2Rx4 PC3-8500R-7 Kit 516423-B21 HP 8GB.
SATA Hot Plug SFF Midline (MDL) Drives HP 500GB 3G SATA 7.2K 2.5in MDL HDD 507750-B21 HP 160GB 3G SATA 7.2K 2.5in MDL HDD 530888-B21 SATA Hot Plug 3.5" Midline (MDL) Drives HP 1TB 3G SATA 7.2K 3.5" MDL HDD 454146-B21 HP 750GB 3G SATA 7.2K 3.
Power Supplies CAUTION: In ProLiant Servers that have more than one power slot (bay), only same size power supplies are recommended. If non-matched power supplies are inserted you will get errors and operation will fail.
HP Insight Control (ICE) suites HP Insight Control suite (ICE) HP Insight Control suite, No Media 1-Server License including 1 year of 24x7 Technical Support and Updates NOTE: Contains 1 license for each of RDP, PMP, VMM, VPM, IPM and iLO Advanced.
Smart Array P212 Controller HP Smart Array P212/Zero Memory Controller 462828-B21 HP Smart Array P212/256 MB Controller 462834-B21 Smart Array P410 Controller HP Smart Array P410/256 MB Controller 462.
HP SC11Xe Host Bus Adapter NOTE: Recommended HBA for SCSI tape drive connect. 412911-B21 NOTE: Please see the QuickSpecs for additional information: http://h18000.
NOTE: Please reference the Tape Autoloader QuickSpecs at: http://www.hp.com/go/automation for additional information needed to create a complete solution.
HP StorageWorks Modular Smart Array MSA SAN Storage Arrays HP StorageWorks 50 Modular Smart Array 364430-B21 NOTE: Please see the Modular Smart Array 50 QuickSpecs for additional information including configuration steps and additional options needed for a complete solution at: http://h18000.
Power Distribution Units Monitored PDUs HP Monitored Power Distribution Unit: Full Rack Version HP 17.3 kVA S2324 Monitored PDU- dual input, 3Ø24A (NA/JPN) AF503A HP 8.6 kVA S1324 Monitored PDU- single input, 3Ø, 24A (NA/JPN) AF504A HP 16.6 kVA S2140 Monitored PDU- dual input, 1Ø, 40A (NA/JPN) AF505A HP 8.
10647 G2 (47U) Rack Cabinet 1200mm Deep - Shock Pallet NOTE: Due to handling and shipping requirements, AF044A is only orderable through HP Factory Express. It is not for direct sales. Customer site surveys are required before an order is approved. CTO orders may require additional lead time.
NOTE: For additional information regarding Rack Options, please see the following URL: http://www.hp.com/go/rackandpower . HP KVM Switch Options 2x1x16 IP Console Switch with Virtual Media AF601A 4x1x.
Service and Support Offerings (HP Care Pack Services) Hardware Services On-site Service 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic U4544E 4-Hour On-site Service, 7-Day x 24-.
NOTE: Memory configurations listed do not apply to "Factory Integrated Models". DDR3 memory population guidelines For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool: www.
other channels, you run at 1066MHz If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz 95 Watt CPU's are required for 1333MHz DIMM speeds. All other CPU's are capable of up to 1067MHz References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
CPU1 CPU2 slot # population order slot # population order Chnl 1 1 G; 8GB DIMM 1 G; empty Chnl 1 2 D; 8GB DIMM 2 D; empty 3 A; 2GB DIMM 3 A; empty Chnl 2 4 H; 8GB DIMM 4 H; empty Chnl 2 5 E; 8GB DIMM .
Standard memory replaced with optional memory (2 CPU model) RDIMM maximum configuration (2 CPU model) 192GB, consisting of twelve (12) 16GB quad-rank PC3-8500 RDIMMs CPU1 CPU2 slot # population order .
Following are memory options available from HP: Memory Registered DIMMs (RDIMMs) HP 2GB 2Rx8 PC3-10600R-9 Kit 500656-B21 HP 4GB 2Rx4 PC3-10600R-9 Kit 500658-B21 HP 4GB 4Rx8 PC3-8500R-7 LP Kit 500660-B.
1-8 Eight SFF SAS hot plug hard drive bays 1-16 Sixteen SFF SAS hot plug hard drive bays NOTE: This configuration does not support optical drive. 1-6 Six LFF SAS hot plug hard drive bays NOTE: This configuration does not support optical drive.
HP Smart Array P411/256 MB Controller HP Smart Array P411/512 MB BBWC Controller SAS Hot Plug SFF Midline (MDL) Drives Quantity Supported Position Supported Controller 500GB 6G SAS 7.
Quantity Supported Position Supported Controller 250GB 3G SATA 5.4K 120GB 1.5G SATA 5.4K Up to 8 1-8 HP Smart Array P800/512 BBWC Controller HP Smart Array P212/Zero Memory Controller HP Smart Array P.
DAT 40 DAT 72 DAT 160 1U Rack-Mount Kit 3U Rack-Mount Kit HP StorageWorks USB Tape Drives, External DAT 40 USB DAT 72 USB DAT 160 USB 1U Rack-Mount Kit External USB 2.
HP StorageWorks D2D Backup Systems D2D120 D2D130 D2D2500i D2D4000i External Embedded Network Controller N/A QuickSpecs HP ProLiant DL380 Generation 6 Storage DA - 13234 Worldwide QuickSpecs — Version 16 — 8.
HP 460W Power Supply Part Number - AC 460W PSU 503296-B21 Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 50/60 Nominal Input Voltage (Vrms) 100 120 208 200 220 230 240 Maximum Rated Output Wattage 460 460 460 460 460 460 460 Nominal Input Current (A rms) 5.
HP 1200W Power Supply Part Number - AC 500172-B21 Operational Input Voltage Range (Vrms) 100 to 240 Frequency Range (Nominal) (Hz) 50/60 Nominal Input Voltage (Vrms) 100 120 208 200 220 230 240 Maximum Rated Output Wattage 800 900 1200 1200 1200 1200 1200 Nominal Input Current (A rms) 9.
System Unit Dimensions (H x W x D) (with bezel) SFF Drives: 3.38 x 17.54 x 27.25 in (8.59 x 44.55 x 69.22 cm) LFF Drives: 3.38 x 17.54 x 29.25 in (8.59 x 44.55 x 74.30 cm) Weight (approximate) Maximum (all hard drives, power supply, and processor installed) 60.
900 W (at 120 VAC), 1200 W (at 200 to 240 VAC) For 750 W Power Supply: 750 W (at 100 to 120 VAC), 750 W (at 200 to 240 VAC) For 460 W Power Supply: 460 W (at 100 to 120 VAC), 460 W (at 200 to 240 VAC) System Inlet Temperature Operating 10° to 35°C (50° to 95°F) at sea level with an altitude derating of 1.
NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements. NOTE: The Listed sound levels apply to standard shipping configurations.
HP NC382i Dual Port Multifunction Gigabit Server Adapters Network Interface 10Base-T/100Base-TX/1000Base-TX Compatibility EEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HP (Hewlett-Packard) DL380 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HP (Hewlett-Packard) DL380 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HP (Hewlett-Packard) DL380 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HP (Hewlett-Packard) DL380 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HP (Hewlett-Packard) DL380, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HP (Hewlett-Packard) DL380.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HP (Hewlett-Packard) DL380. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HP (Hewlett-Packard) DL380 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
