Manuale d’uso / di manutenzione del prodotto 687519-S01 del fabbricante HP (Hewlett-Packard)
Vai alla pagina of 43
The latest 1P rack server, HP ProLiant DL320e Gen8 Server series, is a new entry level rack-optimized platform, ideal for single- application IT infrastructure, web and edge-of-network applications.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. Processor One of the following depending on Model Entry Processors Intel® Pentium® G2120 (3.
Memory One of the following depending on Model Type HP SmartMemory Unbuffered (UDIMM) DIMM Slots Available 4 DIMMs (2 Channels/ 2 DIMMs per channel) Maximum Capacity (UDIMM) 32GB (4 x 8GB@1600MHz) NOTE: HP memory from previous generation servers are not fully compatible with the HP ProLiant DL320e Gen8 Server.
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU). NOTE: For further information, please refer to HP's RBSU (ROM based setup utility) user guide: www.
Maximum Internal Storage Hot Plug SFF SAS 9.6TB 8 x 1.2TB Hot Plug SFF SATA 8.0TB 8 x 1TB Hot Plug LFF SAS 16.0TB 4 x 4TB Hot Plug LFF SATA 16.0TB 4 x 4TB Hot Plug SFF SAS SSD 6.4TB 8 x 800GB Hot Plug SFF SATA SSD 6.4TB 8 x 800GB Hot Plug LFF SATA SSD 3.
Common Slot Power Supply NOTE: The default power supply for DL320e Gen8 server is a 350W Non Hot Plug, Non Redundant (ATX) power supply with 85% efficiency. NOTE: To choose a Redundant Common Slot Power Supply option for the DL320e Gen8 server, a Factory Integrated Model must be chosen, beginning with a CTO server.
Graphics Integrated Matrox G200 video standard 1280 x 1024 (32 bpp) 1920 x 1200 (16 bpp) HP iLO 4 On System Management Memory 16 MB Flash 256 MB DDR 3 with ECC (112 MB after ECC and video) Form Factor One of the following depending on Model 1U Rack form factor 8 SFF Drive Bay Version: 1.
Management Engine technologies whitepaper HP Insight Management HP Service Pack for ProLiant HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) provide a comprehensive approach to firmware and system software maintenance. Together they provide better operating stability and ensure maximum uptime.
Warranty This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
HP Insight management software HP Insight Control HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console.
High Performance Clusters HP Cluster Platforms HP Cluster Platforms are specifically engineered, factory-integrated large- scale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software.
HP Insight Online HP Insight Online is a new addition to the HP Support Center for one stop, secure access to product and HP support information personalized to your IT environment. Insight Online can automatically display devices remotely monitored by HP Insight Remote Support.
Service and Support HP Technology Services for Industry Standard Servers and BladeSystem Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who understands your increasingly complex business technology environment.
Standard Care Standard Care: Service recommendation that maintains high level of server availability HP ProLiant Server Hardware Installation Provides for the basic hardware installation of HP branded.
HP Support Center Personalized online support portal with access to information, tools and experts to support HP business products. Submit support cases online, chat with HP experts, access support resources or collaborate with peers. Learn more http://www.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory Integrated Models" section. NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section of this QuickSpecs.
Performance Models HP ProLiant DL320e Gen8 E3-1240v2 1P 8GB-U P222 Hot Plug 4 LFF 350W PS Server 675422 -001 Processor(s) (1) Intel® Xeon® E3-1240v2 (3.
HP ProLiant DL320e Gen8 E3-1220v2 1P 4GB-U Non- hot Plug 4 LFF 350W PS Server 687520-S01 Processor(s) (1) Intel® Xeon® E3-1220v2 (3.1GHz/4-core/8MB/69W, HT) Cache Memory 8MB (1x8MB) Level3 Memory 4G.
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers/ smartarrayb120i/index.html Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) HP Processors Entry Processors NOTE: All support up to1600MHz DDR3 memory speeds.
1333MHz memory may operate at a lower speed. Please see the see the "Memory" section later in this document and the Online Memory Configuration Tool for details at www.hp.com/go/ddr3memory-configurator . NOTE: For additional memory rules and guidelines, see the "Memory" section later in this document.
Step 3: Choose Additional Factory Integratable Options HP USB Kit HP Gen8 FIO Internal USB Kit 662961-B21 HP Rail Kits NOTE: Gen8 rail kits have changed significantly from prior generation rail kits. Please take a moment to review the installation documentation that comes with the server to help you with the installation of your Gen8 server.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details. SAS Hot Plug with SmartDrive SFF (2.5-inch) Enterprise Drives HP 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive 718162-B21 HP 1.
HP 1TB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive S-Buy 657750-S21 HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive 658071-B21 HP 500GB 6G SATA 7.2K rpm LFF (3.5-inch) SC Midline 1yr Warranty Hard Drive S-Buy 658071-S21 6G SATA Non-Hot Plug LFF (3.
HP 240GB 6G SATA Value Endurance LFF 3.5-in SC Enterprise Value 3yr Wty Solid State Drive 718177-B21 6G SATA ME Hot Plug SFF (2.5-inch) Enterprise Mainstream Solid State Drives HP 800GB 6G SATA Mainstream Endurance SFF 2.5-in SC Enterprise Mainstream 3yr Wty Solid State Drive 691868-B21 HP 400GB 6G SATA Mainstream Endurance SFF 2.
HP Networking Gigabit Ethernet Adapters HP NC112T PCI Express Gigabit Server Adapter 503746-B21 HP NC365T 4-port Ethernet Server Adapter 593722-B21 HP Ethernet 1Gb 2-port 361T Adapter 652497-B21 HP Et.
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator.
Converged Infrastructure Management Software HP OneView HP OneView with iLO Advanced HP OneView Media Kit Phys No Lic E5Y37A HP OneView incl 3yr 24x7 Supp Phys 1 Svr Lic E5Y34A HP OneView incl 3yr 24x.
HP Storage Controllers SAS Controllers Smart Array P222 Controller HP Smart Array P222/512 FBWC 6Gb 1-port Int/1-port Ext SAS Controller 631667-B21 Smart Array P420 Controller HP Smart Array P420/1GB .
HP Tape Backup NOTE: For the complete range of tape drives, autoloaders, libraries and media see: http://www.hp.com/go/tape . For hardware and software compatibility of HP tape backup products see: http://www.hp.com/storage/SPOCK and www.hp.com/go/ebs .
HP Storage Options Fibre Channel HBA NOTE: The following is a list of all Fibre Channel Host Bus Adapters for Windows and Linux. For detailed compatibility information please see: http://h18006.
HP Basic Power Distribution Units (bPDU) HP Basic Power Distribution Unit: 1U/0U Version HP 1.9kVA 120 Volt 12 Outlet NA/JP Basic Power Distribution Unit H5M54A HP 3.6kVA 200-240 Volt 12 Outlet WW Basic Power Distribution Unit H5M56A HP Basic Power Distribution Unit: Half Height Version HP 2.
HP Remote Monitoring Power Distribution Units (mPDU) HP Remote Monitored Power Distribution Unit: 1U Version HP 2.8kVA 120 Volt 12 Outlet NA/JP Monitored Power Distribution Unit D9N43A HP 3.6kVA 200-240 Volt 12 Outlet WW Monitored Power Distribution Unit D9N46A HP 4.
HP 5xC13 Intelligent PDU Extension Bar G2 Kit AF547A HP 5xC13 Outlets Power and UID LEDs Pair Standard Extension Bar AF528A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.www1.hp.com/products/quickspecs/13650_na/13650_na.
HP TAA 0x2x16xKVM Server Console G2 Switch AF626A NOTE: Please see the QuickSpecs for Technical Specifications and additional information: http://h18000.
HP Care Pack Services Proactive Care NOTE: Collaborative Support plus Proactive services delivered by the onshore, local language Advanced Solution Center (ASC), end-to-end case ownership from a Techn.
HP SmartMemory New HP SmartMemory now provides additional protection for your servers. With HP Authentication it can verify that you have true HP Qualified Memory in your HP ProLiant Gen8 server.
The UDIMM installing sequence: Memory Slot DIMM1C DIMM2A DIMM3D DIMM4B Standard (Entry Model) 2 GB Empty 2 GB Empty Empty Standard (Base Model) 4 GB Empty 4 GB Empty Empty Standard (Performance Model).
1 - 4 4 x 3.5" (LFF) SAS/SATA hard drive bays A Optical Drive Bay: Optional DVD-ROM, or DVD-RW drive 1 - 8 8 x 2.5" (SFF) SAS/SATA hard drive bays A Optical Drive Bay: Optional DVD-ROM, or D.
System Unit Dimensions (H x W x D) 8 SFF 1.7 x 17.11 x 27.5 inches (4.32 x 43.46 x 69.90 cm) 4 LFF 1.7 x 17.11 x 29.5 inches (4.32 x 43.46 x 75.0 cm) Weight (approximate) Maximum (all hard drives, power supply, and processor installed) 8 SFF/4 LFF - 16.
with ISO 9296 (ECMA 109). Idle (Note 1) LWAd 5.0 B LpAm 35 dB Average Bystander Operating LWAd 5.1 B LpAm 35 dB Average Bystander NOTE: Values are subject to change without notification and are for reference only. NOTE: Performance of system, options, and ancillary equipment will vary depending on the system configuration.
HP Ethernet 1Gb 2-port 330i Adapter Compatibility IEEE 802.3 10Base-T IEEE 802.3ab 1000Base-T IEEE 802.3u 100Base-TX Data Transfer Method PCI Express, four lanes (x8) Controller BCM5717 Network Transf.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HP (Hewlett-Packard) 687519-S01 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HP (Hewlett-Packard) 687519-S01 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HP (Hewlett-Packard) 687519-S01 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HP (Hewlett-Packard) 687519-S01 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HP (Hewlett-Packard) 687519-S01, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HP (Hewlett-Packard) 687519-S01.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HP (Hewlett-Packard) 687519-S01. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HP (Hewlett-Packard) 687519-S01 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
