Manuale d’uso / di manutenzione del prodotto HHC100A del fabbricante Homelite
Vai alla pagina of 40
PORTABLE SPACE HEATER OWNER’S MANUAL 50 SIDE PFA/PV 010A This heater is certified by the Canadian Gas Association to Canadian Standards Specifications B140.8-1967 and B140.0-1972. R APPROVED CANADIAN ASSOCIATION GAS IMPORTANT Read and understand this manual before assembling, starting, or servicing heater.
2 100577 Safety Information ......................................................................... 3 Product Identification .................................................................... 4 Unpacking ...........................................
3 100577 IMPORTANT: Read this Owner’s Manual carefully and completely before trying to assemble, operate, or service this heater. Improper use of this heater can cause serious injury or death from fire, explosion, electrical shock, and carbon monoxide poisoning.
4 100577 PRODUCT IDENTIFICATION 35/70,000 BTU/HR CANADIAN PFA/PV 042A Flame-Out Control Reset Button Side Cover Fuel Tank Lower Shell Fan Guard Air Filter End Cover Fuel Cap Handle Upper Shell Nose Co.
5 100577 1. Remove all protective packaging that has been applied to heater for shipment 2. Remove heater from carton. 3. Check heater for any shipping damage. If damage is found, promptly inform dealer where heater was purchased. ASSEMBLY PFA/PV 042B This model is furnished with a nose cone guard.
6 100577 These models are furnished with wheels and a front handle. Wheels, front handle, and the mounting hardware is found in the shipping carton. Tools Needed • Medium Phillips Screwdriver • 3/8" Open or Adjustable Wrench • Hammer 1. Slide axle through wheel support frame.
7 100577 THEORY CUTAWAY PFA/OV 003 Fan Fuel Filter Air For Fuel System Air For Combustion And Heating Fuel Spark Plug Combustion Chamber Intake Air Filter Motor Air Pump Air Line To Burner Burner Head.
8 100577 Use only kerosene or No. 1 fuel oil. Do not use heavy fuels such as No. 2 fuel oil or No. 2 diesel. The use of heavy fuels will result in: • clogging of fuel filter and nozzle • carbon build up on spark plug • the need of non-toxic anti-icer in fuel during very cold weather Do not use No.
9 100577 4. Plug heater ’ s power cord into approved, grounded, three-wire extension cord. Extension cord must be at least six feet (1.8 meters) long. Extension Cord Size Requirement 6 to 10 feet (1.8 to 3 meters) long, use 18 AWG (0.75 mm 2 ) rated cord 11 to 100 feet (3.
10 100577 STORING, TRANSPORTING, OR SHIPPING Item How Often How To Fuel tank Flush every 150-200 hours See Storing, Transporting, or of operation or as needed. Shipping above. Air output and Replace every 500 hours of See Air Output, Air Intake, lint filters operation or once a year.
11 100577 OBSERVED FAULT POSSIBLE CAUSE REMEDY Incorrect pump pressure Dirty air output, air intake and lint filters Dirty fuel filter Dirt in nozzle Dirty photocell lens Defective flame-out control Heater ignites, but flame-out control shuts off heater after a short period of time.
12 100577 WARNING Upper Shell Removal 1. Remove screws along each side of heater using 5/16" nut-driver. These screws attach upper and lower shells together. 2. Lift upper shell off. 3. Remove fan guard. ! To avoid risk of burn and electrical shock, never attempt to service heater while it is plugged in, operating or hot.
13 100577 Relief Valve Pressure Gauge Plug (35 Model Shown) Figure 13 - Pressure Gauge Plug Removal Pump Model Pressure 35 3 PSI 100 4 PSI 150 5 PSI Pressure Gauge Figure 14 - Adjusting Pump Pressure 35/70 FUEL FILTER REMOVAL PFA/P 037A Upper Fuel Line Side Cover Fuel Filter Fuel Filter 1.
14 100577 Spark Plug (35 Model) 1. Remove upper shell (see page 12). 2. Remove fan (see page 12). 3. Remove fuel and air line hoses from nozzle assembly. 4. Remove spark plug cable from spark plug. 5. Remove two (2) screws using 5/16" nut-driver and remove burner strap.
15 100577 Nozzle (35 Model) 1. Remove upper shell (see page 12). 2. Remove fan (see page 12). 3. Remove fuel and air line hoses from nozzle assembly. 4. Turn nozzle assembly 1/4 turn to left and pull toward motor to remove. 5. Place plastic hex-body into vise and lightly tighten.
16 100577 12. Attach burner head to combustion chamber. 13. Install spark plug in burner head. 14. Attach spark plug cable to spark plug. 15. Attach fuel and airline hoses to burner head. 16. Replace fan (see page 12). 17. Replace fan guard and upper shell.
17 100577 13. Perform steps 1 through 6 (see page 16). 14. Place fine grade sandpaper (600 grit) on flat surface. Sand rotor lightly in “ Figure 8 ” motion four times (see Figure 30). 15. Reinstall insert and rotor. 16. Perform steps 10 through 12 (see page 16).
18 100577 WIRING DIAGRAMS White Black Blue Green Power Plug 120V/60Hz Photocell Spark Plug Ignitor Flame- Out Control B Reset Button R Red Blue White White White White Red Red Green Terminal Board Mot.
19 100577 ACCESSORIES Heater accessories and parts are available at your local dealer. HEAVY DUTY WHEELS & HANDLE KIT A 009A HEAVY DUTY WHEELS AND HANDLE KIT For heavy duty applications. Makes your heater even more portable and convenient. Fits 35 model.
A Deere & Co. Affiliate / Une Filiale de Deere & Co. HOMELITE 1850 55TH A venue Lachine (Quebec) H8T 3J5 Unit 212-214 590 Ebury Place Annacis Island New Westminister, B.
100577-01 Rev. D 1/96 Pièce no. 18127-C Imprimé aux É-U CHAUFFERETTE PORT A TIVE GUIDE DU PROPRIET AIRE 50 SIDE PFA/PV 010A Cet appareil de chauffage est homologué par l’Association canadienne du gaz suivant les normes canadiennes B140.8-1967 et B140.
2 100577 T ABLE DES MA TIERES INDEX PAGE Notes sur la sécurité ....................................................................... 3 Nomenclature des pièces principales ............................................. 4 Déballage ................
3 100577 • Ne vous servez que de kérosène ou de mazout n° 1. • Branchez-le sur une prise de tension et de fréquence qui correspond à celles indiquées sur la plaque signalétique. • L’appareil de chauffage doit être mis à la terre. Ne vous servez que d’une rallonge à trois fils.
4 100577 NOMENCLA- TURE DES PIECES PRINCIP ALES 35/70,000 BTU/HR CANADIAN PFA/PV 042A R é servoir de combustible Bo î tier Plaque amovible Poign é e Couvercle Bouchon du r é servoir de combustible.
5 100577 ASSEMBLY PFA/PV 042B 1. Retirez tous les emballages de protection utilis é s pour le transport. 2. Retirez l ’ appareil de la bo î te. 3. V é rifiez l ’é tat de l ’ appareil. S ’ il est endommag é , avertissez imm é diatement le concessionnaire qui vous l ’ a vendu.
6 100577 Ces mod è les sont livr é s avec des roues et un guidon pour la partie avant. Les roues et le guidon se trouvent dans la bo î te d ’ emballage. Outillage n é cessaire • Tournevis cruciforme de taille moyenne • Cl é plate ou cl é à molette de 3/8 po • Marteau 1.
7 100577 THEORY CUTAWAY PFA/OV 003 PRINCIPES DE FONCTIONNE- MENT Entr é e d ’ air froid Filtre d ’ entr é e d ’ air Figure 5 - Coupe, principe de fonctionnement Chambre de combustion Sortie d .
8 100577 A VERTISSEMENT Pour é viter les risques d ’ incendie ou d ’ explosion utilisez seulement du k é ros è ne ou du mazout n ° 1. Ne vous servez jamais d ’ essence, d ’ huile de vidange, de naphte, de diluant à peinture, d ’ alcool, ou de tout autre combustible tr è s inflammable.
9 100577 4. Branchez le cordon é lectrique à une rallonge à trois fils avec mise à la terre. La rallonge doit avoir une longueur d ’ au moins 1,8 m (6 pi).
10 100577 Remarque: les soci é t é s de transport exigent que les r é servoirs de combustible soient vides pour l ’ exp é dition. 1. Vidanger le r é servoir de combustible. Remarque: certains mod è les sont é quip é s d ’ un bouchon de vidange au-dessous du r é servoir.
11 100577 DIAGNOSTIC DES P ANNES A VERTISSEMENT Pour é viter les risques de br û lure et de chocs é lectriques, n ’ effectuez aucune op é ration d ’ entretien sur l ’ appareil de chauffage lorsqu ’ il est branch é , fonctionne, ou est chaud.
12 100577 ENTRETIEN MARCHE A SUIVRE Pour é viter les risques de br û lure et de chocs é lectriques, n ’ effectuez aucune op é ration d ’ entretien sur l ’ appareil lorsqu ’ il est branch é , fonctionne, ou est chaud.
13 100577 (Mod è le 35 seulement) 4. Remplacez les filtres de sortie d ’ air et à poussi è re (voir Calendrier d ’ entretien, page 10). 5. Lavez ou remplacez le filtre d ’ entr é e d ’ air (voir Calendrier d ’ entretien, page 10). 6. Remontez le cache-filtre.
14 100577 Bougie (mod è le 35) 1. D é posez le couvercle (voir page 12). 2. D é posez le ventilateur (voir page12). 3. D é tachez les conduites de combus- tible et d ’ air du porte-buse. 4. D é branchez le fil de la bougie. 5. Avec un tourne- é crou de 5/16 po d é posez les deux vis qui retiennent la bride de montage du br û leur.
15 100577 Buse (mod è le 35) 1. D é posez le couvercle (voir page 12). 2. D é posez le ventilateur (voir page 12). 3. D é tachez les conduites d ’ arriv é e de combustible et d ’ air du porte-buse. 4. Tournez le porte-buse de 1/4 tour vers la gauche et tirez vers le moteur pour le lib é rer.
16 100577 Buse (mod è les 100/150) 1. D é posez le couvercle (voir page 12). 2. D é posez le ventilateur (voir page 12). 3. D é posez les conduites d ’ arriv é e de combustible et d ’ air du br û leur. 4. D é tachez le fil de la bougie. 5. D é posez la bougie du br û leur avec une cl é plate de 13/16 po.
17 100577 Vis de r é glage du jeu Palette Vis de r é glage du jeu Rotor Jeu mesur é avec une cale d ’é paisseur de 0,076 à 0,101 mm (0,003 à 0,004 po) Figure 30 - Polissage du rotor Figure 29 .
18 100577 SCHEMAS ELECTRIQUES FICHE TECHNIQUE Num é ro de mod è le 35 100 150 Rendement (Btu/h) 35 000 98 000 150 000 Combustible Utilisez seulement du k é ros è ne ou du mazout n ° 1 Contenance du r é servoir (litres/gal U.
19 100577 ACCESSOIRES Votre concessionnaire peut vous fournir les accessoires et les pi è ces d é tach é es pour cet appareil de chauffage. MANOMETRE Pour tous les mod è les. Sert à v é rifier la pression de la-pompe. Commander la pi è ce n ° 00529-02.
A Deere & Co. Affiliate / Une Filiale de Deere & Co. HOMELITE 1850 55TH A venue Lachine (Quebec) H8T 3J5 Unit 212-214 590 Ebury Place Annacis Island New Westminister, B.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Homelite HHC100A è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Homelite HHC100A - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Homelite HHC100A imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Homelite HHC100A ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Homelite HHC100A, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Homelite HHC100A.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Homelite HHC100A. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Homelite HHC100A insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
