Manuale d’uso / di manutenzione del prodotto 42PD7800 del fabbricante Hitachi
Vai alla pagina of 58
1 ENGLISH USER'S MANUAL Thank you very much for purchasing the HIT ACHI Plasma Display . Before using your monitor , please car efully read the "SAFETY INSTRUCTIONS" and this "USER'S MANUAL" so you will know how to operate the monitor properly .
2 Important Please read this User's Manual thor oughly , especially the Safety Instructions on Page 4 to 7. Mis-use may cause damage to your plasma monitor , which could shorten its lifespan, or cause injur y to yourself.
3 ENGLISH CONTENTS FEA TURES .............................................................. 2 SAFETY INSTRUCTIONS ..............................4 IMAGE RETENTION OF PLASMA DISPLA Y ..8 COMPONENT NAMES ..................................9 Main Unit ....
4 SAFETY INSTRUCTIONS About the Symbols This Plasma monitor has been designed and manufactured to meet international safety standards, but like any electrical equipmen t, care must be taken if you are to obtain the best results and safety is to be assured.
5 ENGLISH W ARNING Be cautious of the power cord connection. Incorrect connection of the power cor d could result in fir e or electrical shock. • Do not touch the power cord with a wet hand. • Check that the connecting portion of the power cord is clean (with no dust), before using.
6 CA UTION PRECA UTIONS Be careful in moving the monitor . Neglect could result in an injury or damage. • Do not move the monitor during use. Before moving, disconnect the power plug and all external connections. • Y ou are advised to move the monitor with two persons.
7 ENGLISH • Prevention of an obstacle to Radio r eceivers This monitor has been designed pursuant to the international EMI standards. This is to prevent a problem to Radio r eceivers. - Keep the monitor away from Radio. - Adjust Radio antennas in order for the monitor not to receive interference.
8 IMAGE RETENTION OF PLASMA DISPLA Y There are different characteristics that result in panel ima ge retention depending on how the plasma display is used.
9 ENGLISH COMPONENT NAMES Main Unit Control panel • Adjustment buttons are located on the bottom. • The back cover is provided with indications to distinguish the adjustment buttons.
10 Remote contr ol POWER ON/OFF button INPUT SELECT buttons MENU button OK button SOUND MODE button VOLUME UP/DOWN button PROGRAM SELECT buttons (TV) MUL TI MODE button RECALL button FUNCTION SELECT b.
11 ENGLISH Dynamic Natural Cinema Movie Music Favorite Speech PICTURE MODE Y ou may recall the picture mode by pressing this button. Each time pr essed, picture mode is changed in following sequence. INPUT SELECT Press this button to change input mode.
12 TV / TEXT button CANCEL button INDEX button TEXT / TV + TEXT button P AGE UP / DOWN button COLOR buttons (RED, GREEN, YELLOW , BLUE) SUB TITLE button REVEAL button Buttons on Remote Control This switches the receiver between the TV mode and the TELETEXT mode.
• In order to pr event an internal temperature increase, maintain a space of 10cm (4 inches : For a desktop set-up) or more between the sides and other objects such as walls, etc.
14 Connecting to an Audio V isual Device (1) Make sure that the power s witch of the monitor is turned off. (2) Make sure that the power s witch of the imaging de vice is turned off.
15 ENGLISH When the "ANT" terminal is connected to outdoor antenna instead of CA TV system, please note that a good antenna adaptor is necessary . See the diagram on the right. Precautions when connecting the antenna • Clamp section A using pliers when installing the coaxial cable.
16 Connecting to a PC (1) Make sure that the displa y signal of the personal computer to be used is compatible with the specifications of this device. • See "Product Specifications" concerning the specifications of this device. (2) Make sure that the power s witch of the personal computer is turned off .
17 ENGLISH Mounting the Speaker Unit INST ALLA TION INSTRUCTIONS (continued) Make sure that the main power swich of the monitor is turned off (standby or indicating lamp: off/r ed) when removing or connect ing the speaker cables. CA UTION Make sure to use the speaker systems fastened with the speaker holders and the screws.
18 Mounting the Speaker Unit (continued) INST ALLA TION INSTRUCTIONS (continued) 4. Attach the speaker cables to speaker systems. Connect the copper - colored wire to the Red side.
19 ENGLISH Mounting the Side Input INST ALLA TION INSTRUCTIONS (continued) • With the speaker unit 1. Mount the side input into the speaker holder . Hook the clamps (4 pieces) of the speaker holder into the holes as shown in the figure and pull them down until it sounds click .
20 INST ALLA TION INSTRUCTIONS (continued) Connect the power cor d, after completing all other connections. ...42, 32 Connect the power cor d to this device. Connect the power cor d plug to the power outlet. (The type of plug is different fr om this drawing f or some countries.
21 ENGLISH OPERA TING INSTRUCTIONS Indicating lamp Main power switch (32) (37) (42) SUB-POWER button POWER ON/OFF button T urning Power On and Off • T o turn the monitor power ON, press the main po wer switch on the monitor main unit to ON, and then press the SUB PO WER b utton of control panel or the po wer button on the remote contr ol.
22 OPERA TING INSTRUCTIONS (continued) INPUT SELECT button CHANNEL UP/DOWN buttons Input Switching Size Switching • Input can be switched b y pressing the A V1~6, RGB1 or RGB2 buttons of the remote contr ol. • Input can be switched to TV b y pressing CHANNEL UP/DO WN b uttons or PROGRAM SELECT b uttons.
23 ENGLISH V ertical picture position can be adjusted for [Panoramic], [Zoom] and [Cinema] mode as follows. 1. Press ZOOM button and SELECT buttons during picture size display . 2. Position display will appear . 3. Adjustment range of each picture size ar e as shown below .
24 OPERA TING INSTRUCTIONS (continued) Audio Mute V olume Adjustment The audio v olume can be temporarily m ute by pressing the MUTE button of the remote contr ol. The v olume can be adjusted by pressing the and buttons of the remote contr ol (or the and volume buttons of the monitor unit).
25 ENGLISH OPERA TING INSTRUCTIONS (continued) Power Swivel • This feature contr ols the motorized stand. It allows turning the plasma display left or right using the remote control. Make sure that the main power switch of the monitor is turned off when r emoving or connecting the power cord, the connector cables, and the speaker cables.
26 OPERA TING INSTRUCTIONS (continued) Input Signal Scr een Display The input signal status can be display ed on the screen by pressing the RECALL b utton of the remote control. • The display will go out in approximately 6 seconds. 1 ABCDE - - - - Min.
27 ENGLISH OPERA TING INSTRUCTIONS (continued) Displaying MUL TI PICTURE If the MUL TI PICTURE button on the remote control is pressed, multi pictures will displa y . And then three types of the screen can be selected by pressing the MUL TI MODE button on the remote contr ol.
28 Activating the Split mode fr om the video input screen Pressing the MUL TI PICTURE button one time will display 2 pictures. • The speaker icon can be shifted left and right by pressing the and SELECT buttons. The audio of the video will be output from the side on which the speaker icon is located.
29 ENGLISH OPERA TING INSTRUCTIONS (continued) FREEZE button Picture Fr eezing When the FREEZE button on the remote contr ol is pressed, the screen transfer s into the freeze mode . • There ar e two types of freezing scr een mode, Split and Strobe. These ar e possible to select at the “ Freeze Mode ” setting of the Function Menu.
30 OPERA TING INSTRUCTIONS (continued) ROT A TE button PHOTO button PHOTO INPUT button SLIDE SHOW button Photo Input Display (37/42 only) With the PHO T O b utton on the remote control, the pictures fr om a digital camera or Car d Reader can be displayed.
Information No message No message “ No Connection ” “ No Connection ” “ No Connection ” “ No File ” “ Loading ” 31 ENGLISH OPERA TING INSTRUCTIONS (continued) Photo Input Display (.
32 OPERA TING INSTRUCTIONS (continued) Photo Input Display (37/42 only) (continued) • The picture may not be displayed in case of editing by computers. • Do not connect any apparatus other than a digital camera and a USB card reader to the photo input connector .
33 ENGLISH OPERA TING INSTRUCTIONS (continued) MENU button RECALL button SELECT/ADJUST buttons ( , , , ) OK button RETURN button Using the Menu Scr een (On-screen display system) When the MENU button .
34 Picture Audio Tim er Function Setup Language Select OK Set Setup Auto T uning Manual T uning Fine T uning Sort T eletext Language Auto Off Off Select Set Return OK Setup Auto T uning Manual T uning.
35 ENGLISH OPERA TING INSTRUCTIONS (continued) SETUP MENU (TV mode) (continued) Selected characters Setup hint Select the channel entry method between position setting or direct setting. And press the OK button to fix it. • If [Position] is selected, the screen display will be numbers (1~199 and A V00).
36 OPERA TING INSTRUCTIONS (continued) SETUP MENU (V ideo mode) Picture Audio Tim er Function Setup Language Select OK Set Setup System System 1 Color System Video Input RGB1 D VI-STB RGB2 Component H.
37 ENGLISH OPERA TING INSTRUCTIONS (continued) SETUP MENU (RGB mode: RGB1 (DVI-PC), RGB2 (RGB)) MENU Picture Audio Tim er Function Setup Language Select OK Set Setup Auto Adjust Adjust Horizontal P os.
38 Movie PC DVI-PC DVI-STB RGB Component Auto HDTV SDTV/DVD Off On Selected characters Setup hint V ertical Filter Frequency Mode RGB1 RGB2 (1st step) RGB2 (2nd step) T urn On when concer ned about screen flicker . Set to Movie when viewing moving images on a personal computer .
39 ENGLISH FUNCTION MENU MENU Picture Audio Tim e r Function Setup Language Select OK Set Function Screen Sav er Off Screen Wipe On 60Min. Black Side P anel Off Video P ower Sa ve Off F reeze Mode Split Default Zoom Panoramic P anel Life Nomal Luminance Manager Off Slide Interval 5Sec.
40 MENU Picture Audio Time r Function Setup Language Select OK Set Picture Picture Mode Dynamic Contrast +31 Brightness -31 Color 0 Sharpness +15 Tint 0 Color T emperature Normal Contrast Mode Normal .
41 ENGLISH OPERA TING INSTRUCTIONS (continued) PICTURE MENU (TV/V ideo mode) (continued) Selected characters Picture Mode Setup hint Dynamic: This setting is best for very bright ambient lighting. Natural: This setting is for normal lighting conditions.
42 OPERA TING INSTRUCTIONS (continued) PICTURE MENU (TV/V ideo mode) (continued) Selected characters Color Management Setup hint T urn On when the original balance of each color is required to adjust depending on the user ’ s preference. This adjusts listed colors individually to make them either deeper or more pure.
43 ENGLISH MENU Picture Audio T imer Function Setup Language Select OK Set Picture Contrast : + 31 Brightness : – 31 Color : 0 T int : + 31 Picture Enhancement : Off Color T emperature : Normal Color T emp.
44 OPERA TING INSTRUCTIONS (continued) AUDIO MENU MENU Picture Audio Tim e r Function Setup Language Select OK Set Audio Audio Mode : Movie T reble : + 10 Bass : – 10 Balance : 0 L R Dynamic Bass : .
45 ENGLISH TIMER MENU MENU Picture Audio Tim e r Function Setup Language Select OK Set Timer Off T imer : 30Min. On T imer : - - : - - Select Adjust Return MENU Picture Audio Tim e r Function Setup Language Select OK Set Language Select Return Exit English LANGUAGE MENU Select a language by ▲ and ▼ SELECT buttons and press the OK button.
Picture Mode Contrast Brightness Color Shapness Tint Color T emperature Contrast Mode YNR CNR Film Mode P AL Comb Filter LT I CTI Black Enhancement Auto Color Color T emp.
47 ENGLISH A2 / NICAM / Sound Multiplex (TV mode) • The CH I / II button is only useful for NICAM and sound multiplex signals. Otherwise pressing this button will have no ef fect. BILINGU AL / DU AL sound broadcast When bilingual program is receiv ed, sound mode displa y appears in yello w as shown on right.
48 OTHER FUNCTIONS (continued) Power Save Mode When the RGB1, RGB2 input is selected • When this unit is connected to a VESA DPMS computer , the Power Save (Off) mode can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit.
49 ENGLISH OTHER FUNCTIONS (continued) DVD Player/STB Selection (continued) Set up hint Example) HIT ACHI DVD T o operate HIT ACHI DVD player , press and hold the button, followed by the button. 1. Press button to indicate the lamp of DVD on the remote control.
39 50 TROUBLESHOOTING Symptoms That Seemingly Appear to be Failur es Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorr ected, contact your dealer . Customer servicing can be hazardous. W ARNING Symptom P oint to chec k See page • No picture with the power -indicating lamp off.
51 ENGLISH TROUBLESHOOTING (continued) Symptoms That Seemingly Appear to be Failur es (continued) Symptom P oint to chec k See page • If the direct fr equency from the computer is below 85Hz, try a higher frequency (upper limit 85Hz). Ther e may be a slight attenuation of the current image.
52 TROUBLESHOOTING (continued) Actions to Corr ect Abnor mal Displays Depending on the kind of system equipment used, images may not be displa yed normall y .
P AL B, G, H / I / D, K SECAM B, G / D, K / K1 NTSC-M OUTPUT (MONITOR): composite video monitor -output terminal (RCA) OUTPUT (MONITOR): L/R audio monitor - output terminal (RCA) OUTPUT (HEADPHONE): L.
54 Pin 4 3 2 1 F rame 4 3 2 1 Pin RGB terminal (D-sub 15-pin connector) • When differ ent kinds of input signals are simultaneously input to the monitor via a graphics board or the like, the monitor.
55 ENGLISH D-sub Applicable video signals for input terminal (TV mode) With Composite Input(A V1~A V5 input) and S-video Input (A V3, A V5 input). With component input (A V1, A V2 and RGB2-component input).
56 PRODUCT SPECIFICA TIONS (continued) Recommended Signal List (continued) With Digital signal input 1 640 X 400 70.08 31.47 25.18 2 640 X 480 59.94 31.47 25.18 3 W-VGA 864 X 480 59.94 31.47 34.24 WVGA type : On 4 640 X 480 72.81 37.86 31.
57 ENGLISH PRODUCT SPECIFICA TIONS (continued) Recommended Signal List (continued) With Analog signal input (RGB2 input) No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 .
Screw NOTE About the He adphone (Refer to page 44.) During PC input ( RGB1/RG B2), the au dio is not o utput from the hea dphone. Only with A V1 and A V 6 inputs during the 2 picture mode, even though select “B” from “Audio Menu, Headphone Select ,” the audio of A(left picture) is alway s output from the he adphone.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hitachi 42PD7800 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hitachi 42PD7800 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hitachi 42PD7800 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hitachi 42PD7800 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hitachi 42PD7800, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hitachi 42PD7800.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hitachi 42PD7800. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hitachi 42PD7800 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
