Manuale d’uso / di manutenzione del prodotto DS-2CD4212FWD-IZS del fabbricante Hikvision
Vai alla pagina of 107
Network Camera User Manual V5.1.0 UD.6L0201D1221A 01.
User Manual of Network Camera 1 This manual applies to the network camera (V5.1.0). Thank you for purchasing our product. If there are an y questions, or requests, please do not hesitate to contact the dealer.
User Manual of Network Camera 2 Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comp ly with the limits for a digital device, pur suant to part 15 of the FCC Rules.
User Manual of Network Camera 3 Safety Instruction These instructions are intended to ensure that the user can use the produ ct correctly t o avoid danger or property loss. The precaution measure is divided into ‘W arnings’ and ‘Cautions’: W arnings : Serious injury or death may be caused if an y of these warnings are neglected.
User Manual of Network Camera 4 Cautions: Make sure the power suppl y voltage is correct before using the camera. Do not drop the camera or subject it to physical shock. Do not touch sensor modules with fingers. I f cleaning is necessary , use a clean cloth with a bit of ethanol and wipe it gently .
User Manual of Network Camera 5 T able of Contents Chapter 1 System Requirement .............................................................................. 8 Chapter 2 Network Connection .............................................................
User Manual of Network Camera 6 6.3.8 Co nfiguring UPnP™ Settings ......................................................................................... 45 6.3.9 Email Sending T riggered by A larm .................................................
User Manual of Network Camera 7 10.6.1 Rebooting the Ca mera ................................................................................................ 97 10.6.2 Restoring De fault Settings .......................................................
User Manual of Network Camera 8 Chapter 1 System Requir ement Operating System: Microsoft W indows XP SP 1 and above version / V ista / W in7 / Server 2003 / Server 2008 32bits CPU: Intel Pentium IV 3 .0 GHz or higher RAM: 1G or higher Display: 1024× 768 resolution or higher W eb Browser : Internet Explo rer 6.
User Manual of Network Camera 9 Chapter 2 Network Connection Befor e you start: If y ou want to set the ne twork camera via a L AN (Local Area Network) , please refer to Section 2.1 Setting the Network Camera over the LAN . If y ou wa nt to se t the network camera via a W AN (W ide Area Network), please refer to Section 2.
User Manual of Network Camera 10 Figure 2-2 Connecting via a Switch or a Router 2.1.2 Detecting and Changing the IP Ad dr ess You need the IP address to visit the network camera.
User Manual of Network Camera 11 Figure 2-3 SADP I nterface 2.2 Setting the Network Camera over the W AN Purpose: This section explains how to connect the n etwork camera to the W AN wit h a static IP or a dynamic IP . 2.2.1 S tatic IP Connection Befor e you start: Please appl y a static IP from an ISP (Internet Service Provider).
User Manual of Network Camera 12 2. Assign a LAN IP address, the subnet mask and the gatew ay . Ref er to S ection 2.1.2 Detecting and Changing the IP Address for detailed IP address configuration of the camera. 3. S ave the static IP in t he router .
User Manual of Network Camera 13 1. Connect the network camera to the router . 2. In the camera, assi gn a LAN IP address, the sub net mask and the gateway . R efer to Section 2.1.2 Detecting and Changing th e IP Address for detailed LAN configuration.
User Manual of Network Camera 14 Figure 2-7 Normal Domain Name Resolution S teps: 1. Appl y a domain name fr om a domain name provider . 2. Configure the DDNS sett ings in the DDNS Settings int erface of the network camera. R efer to Section 6.3.4 Configuring DDNS S ettings for detailed configuration.
User Manual of Network Camera 15 Chapter 3 Access to the Netw ork Camera 3.1 Accessing by W eb Bro wsers Steps: 1. Open the web browser. 2. Input the IP address of the network camera in the address bar, e.g., 192.0.0.64 and press the Enter key to enter the login interface.
User Manual of Network Camera 16 Figure 3-2 Download and Install Plug- in Figure 3-3 Install Plug-in (1) Figure 3-4 Install Plug-in (2) Note: You may have to close the web browser to install the plug-in. Please reopen the web browser and log in again after installing the plug-in.
User Manual of Network Camera 17 3.2 Accessing by Client Softwar e 3.2.1 Accessing by iVMS-4200 PCNVR The product CD contains the iVMS-4200 PCNVR. Y ou can view the live video and manage the camera with the software. Follow the installation prompts to install the software.
User Manual of Network Camera 18 Figure 3-6 iVMS-4200 Configuration Panel Note: For detailed information about the software, please refer to the user manual of the iVMS-4200 PCNVR. 3.2.2 Accessing by iVMS-4500 Softwar e T o view the camera with a mobile phone, you can just install the iVMS-4500 client software in your mobile phone.
User Manual of Network Camera 19 Chapter 4 Wi -Fi Settings Purpose: By conne cting to the wireless network, you don’t need to use cable of any kind for network connection, which is very c onvenient for the actual surveillance application. Note: This chapter is only applicable fo r the cameras with the built-in Wi -Fi module.
User Manual of Network Camera 20 4. Check the checkbox to select the Network mode as Ma nage, and the Security mode of the network is automatically shown when you select the wireless network, please don’ t change it manually . Note: These parameters are exactly identical with those of the router .
User Manual of Network Camera 21 Figure 4-5 Ad -hoc Connection Point 6. Choose the SSID and connect. Security Mode Description: Figure 4-6 Security Mode Y ou can choose the Security Mod e as not -encrypted, WEP , WP A -personal, WP A-enterprise, WP A2-personal, and W P A2-enterprise.
User Manual of Network Camera 22 the method used by y our access point . Not all access point s have this option, in which case the y probabl y us e Open System, which is sometimes known a s SSID Authentication. Key length - This sets the length of the ke y used for the wireless encryption, 64 or 128 bit.
User Manual of Network Camera 23 Figure 4-9 EAP-TLS Identity - Enter the user ID to present to the network. Private key password – Enter the password for your user ID. EAPOL version - Select the version used (1 or 2) in your access point.
User Manual of Network Camera 24 WPS (W i-Fi Protected Setup) refers to the easy configuration of the encrypted connection between the device and the wireless router . The WPS makes it easy to add new devices to an existing ne twork without entering long passphrases.
User Manual of Network Camera 25 4. Push the WPS button to enable the function on the camera. If ther e is not a WPS button on the camera, y ou can also c lick the virtual button to enable the PBC function on the web interface. 5. Click Conn ect button.
User Manual of Network Camera 26 3. Click Conn ect . Or Y ou can generate the PIN code on the camera si de. And the expired time for the PIN code is 120 seconds. 1. Click Generate . 2. Enter the code to the router , in t he example, enter 48167581 to the router .
User Manual of Network Camera 27 Chapter 5 Live V iew 5.1 Live V iew Page Purpose: The live view page allows you to view the real-time video, capture images, realize PTZ control, set/call presets and configure video parameters.
User Manual of Network Camera 28 Toolbar: Operations on the live view page, e.g., live view, capture, record, audio on/off, tw o-way audio, etc. PTZ Control: Panning, tilting and zoomi ng actions of the camera and the li ghter and wiper control (if it supports PTZ function or an external pan/tilt unit has been installed).
User Manual of Network Camera 29 5.3 Recording and Capturing Pictur es Manually In the live view inte rface, click on the tool bar to capture the live pictures or click to record the live vi ew . The saving paths of the captured pictures and clips can be set on the Configuration > Local Conf iguration page.
User Manual of Network Camera 30 when you click and drag the mouse in the relative positions. For the cameras which support lens movements onl y , the direction buttons are invalid.
User Manual of Network Camera 31 Note : Y ou can configure u p to 128 presets. Callin g a Pre set: This feature enables the camera to point to a specified preset scene manually or when an event takes place. For the defined preset, you can call it at any time to the desired pre set scene.
User Manual of Network Camera 32 Chapter 6 Network Camera Configuration 6.1 Configuring Local Parameters Note: The local configuration refers to the parameters of t he live view , record files and captured pictures.
User Manual of Network Camera 33 streaming under some network environments. MUL TICAST : I t’ s recommended to select MCAST ty pe when using the Multicast function.
User Manual of Network Camera 34 6.2 Configuring Time Settings Purpose: Y ou can follow the instructions in thi s section to c onfigure the time synchronization and DST settings.
User Manual of Network Camera 35 Figure 6-3 T ime S y nc b y NTP S erver Note : If the camera is connected to a public network, y ou should use a NTP server that has a ti me s ynchronization function, such as the s erver at the National T ime Center ( IP Address: 210 .
User Manual of Network Camera 36 6.3 Configuring Network Settings 6.3.1 Configuring TCP/IP Settings Purpose: TCP/IP settings must be properl y c onfigured before you ope rate the camera over network.
User Manual of Network Camera 37 Notes : The valid value range of MTU is 500 ~ 1500. The Multicast sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address.
User Manual of Network Camera 38 Server Port: The default server port number is 8000. 3. Click Save to save the settings. Note : A reboot is require d for the settings to take ef fect.
User Manual of Network Camera 39 1. Enter the DDNS Settings interface: Configuration > Advanced Configuration > Network > DDNS Figure 6-9 DDNS Settings 2. Check the Enable DDNS checkbox to enable this feature. 3. S elect DDNS Type . Three DDNS ty pes are selectable: HiDDNS, I PServer and DynDNS.
User Manual of Network Camera 40 Figure 6-10 DynDNS Settings IP Server: Steps: (1) Enter the Server Address of the IP Server. (2) Click Save to save the settings. Note: For the IP Server, you have to apply a static IP, subnet mask, gateway and preferred DNS from the ISP.
User Manual of Network Camera 41 Figure 6-12 NO -IP DNS Settings (2) Enter the Server Address as www.noip.com (3) En ter the Domain name you registered. (4) Enter the Port number, if needed. (5) Enter the User Name and Password. (6) Click Save and then you can view the camera with the domain name.
User Manual of Network Camera 42 6.3.5 Configuring SNMP Settings Purpose: You can set th e SNMP function to get camera s tatus, parameters and alarm related information and manage the camera remotely when it is connected to the network.
User Manual of Network Camera 43 Figure 6-14 SNMP Settings 2. Check the corresponding version checkbox ( , , ) to enable the feature. 3. Configure the SNMP settings. Note: The settings of the SNMP software should be the same as the settings you configure here.
User Manual of Network Camera 44 The IEEE 802.1X standard is supported b y the network cameras, and when the feature is enabled, the camera data is secured and u ser authentication is needed when connecting the camera to the network protected by the IEEE 802.
User Manual of Network Camera 45 S teps: 1. Enter the QoS Settings interface: Configuration >Advanced Configuration > Network > QoS Figure 6-16 QoS Settings 2. Configure the QoS settings, including video / audio DSCP , eve nt / alarm DSCP and Management DSCP .
User Manual of Network Camera 46 Figure 6-17 Configure UPnP Settings 6.3.9 Email Sending T riggere d by Ala rm Purpose: The s y st em can b e configured to send an Email notification to all designated receivers if an alarm event is detected, e.g., motion detection event, video loss, video tampering , etc.
User Manual of Network Camera 47 Figure 6-18 Email Settings 3. Configure the following settings: Sender: The name of the email sender . Sender’ s Add r ess: The email address of the se nde r . SMTP Server: The SMTP Server IP address or host name (e.
User Manual of Network Camera 48 this checkbox to use authentication to log in to this server and enter the login user Name and password. Choose Receiver: Select the receiver to which the email is sent. Up to 2 receivers can be configured. Receiver: The name of the user to be notified.
User Manual of Network Camera 49 or a timing snapshot task. S teps: 1. Enter the FTP Settin gs interface: Configuration >Advanced Configuration > Network > FTP Figure 6-20 FTP Settings 2. Config ure the FTP settings ; and the user name and password are requi red for login the FTP server .
User Manual of Network Camera 50 3. Click Save to save the setting s. Note : If you w ant to upload the captured pi ctures to FTP server , you have to enable the continuous snapshot or event-tri ggered snapshot on Snaps hot page. For detailed information, please refer to the Section 6.
User Manual of Network Camera 51 3. Y ou can customize the following parameters f or the selected main stream or sub-stream: V ideo T yp e : Select the stre am type to video stream, or video & a udio composite st ream. The audio signal will be recorded only when the V ideo T ype is V ideo & Audio .
User Manual of Network Camera 52 Scalable V ideo C oding is an ex tension of the H.264/A VC standard. Set it OFF or ON according to your actual needs. 4.
User Manual of Network Camera 53 quality of the ROI whereas the background information is less focused. S teps: 1. Enter the ROI settings interface Configuration > Advanced Configuration > V ideo / Audio >ROI Figure 6-24 Region of Interest Setting s 2.
User Manual of Network Camera 54 The fixed region encoding i s the ROI encoding for the manu ally configur ed area. And y ou can cho ose the Image Quality Enhancing level for ROI encoding, and you can also name the ROI area. The d ynamic r egion refers to the RO I de fined b y intelligent an alysis such as human face detection.
User Manual of Network Camera 55 Figure 6-25 Display Settings of Day/night Auto-switch Image Adjust ment Brightness describes bright of the ima ge, which ra nges from 1~100, and the default value is 50. Contrast describes the contrast of the ima ge, which ranges from 1 ~100, and the default value is 50.
User Manual of Network Camera 56 1/100,000s. Adjust it according to the actual luminance condition. Focus Settings For the camera supports electronic lens, you can set the focus mode as Manual or Auto.
User Manual of Network Camera 57 AUT O, and the IR L ED changes acc ordin g to the actual luminance. E.g.: if the current scene is bright enough, then the IR LED adjusts it self to lower power; and if the scene is not bright enough, the IR LED adjusts itself to higher power .
User Manual of Network Camera 58 the image is misty . It enhances the subtle details so that the image appears clearer . Electrical Image S tabilizer : EIS reduces the effects of vibra tion in a video . Gr ey Scale : Y ou can choose the range of the gre y scale as [0 -255] or [16-235].
User Manual of Network Camera 59 Figure 6-28 Day/Night Scheduled-Switch Configuration Interface S teps: 1. Click the time line to select the start time and the end time of the switch. 2. Click Common tab to configure the common parameters applicable to the day mode and night mode.
User Manual of Network Camera 60 Figure 6-29 OSD Settings 2. Check the co rresponding checkbox to select th e display of camera name, date or week if required. 3. Edit t he camera name in the tex t field of Camera Name . 4. S elect from the drop-down list to set the time format, date format, display mode and the OSD font size.
User Manual of Network Camera 61 6.5.3 Configuring T ext Overlay Settings Purpose: Y ou can customize the tex t overla y. S teps: 1. Enter the T ext Overla y Settings interface: Configuration > Advanced Configuration > Image > T ext Overlay Figure 6-31 T ext Overlay 2.
User Manual of Network Camera 62 S teps: 1. Enter the Privacy Mask Settings interface : Configuration > Advanced Configuration> Image > Privacy M ask 2. Check the checkbox of Enab le Privacy M ask to enable this function. 3. Click Draw Area .
User Manual of Network Camera 63 Configuration > Advanced Configuration> Image > P icture Overlay Figure 6-33 Pi cture Overlay 2. Cli ck Br owse to select a picture. 3. Cli ck Upload to upload it. 4. Check Enab le Pict ure Overlay checkbox to enable the function.
User Manual of Network Camera 64 6.6.1 Configuring Motion Detection Purpose: Motion detection detects the moving objects in the configured surveillance area, and triggers the certain action as a respond to detection.
User Manual of Network Camera 65 Figure 6-34 Enable Motion Detection (4)Click Draw Ar ea . Click and drag the mouse on the live video to draw a motion detection area. (5)Click S top Drawing to finish drawing one area. (6)(Optional) Click Clear All to clear all of the areas.
User Manual of Network Camera 66 (2)Choose the day you want to set the arming schedule. (3)Click to set the time period for the arming schedule. (4)(Optional) After you set the arming schedule, you can copy the schedule to other days. (5)Click OK to save the settings.
User Manual of Network Camera 67 Audible Warning Trigger the audible warning loc ally. And it onl y supported by the device have the audio output. Notify Surveillance Center Send an ex ception or alarm signal to remote mana gement softw are wh en an event occurs.
User Manual of Network Camera 68 Figure 6-38 Expert Mode of Motion Detection Da y /Night Switch OFF S teps: (1) Draw the detection area as in the normal configuration mode. Up to 8 areas are supported. (2) Select OFF for Switch Day and Night Settings .
User Manual of Network Camera 69 Figure 6-39 Day/Night Auto-Switch (3) Select the area by clicking the area No. (4) Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area in the daytime. (5) Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area at night.
User Manual of Network Camera 70 (5) Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area in the daytime. (6) Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area at night.
User Manual of Network Camera 71 Section 6.6.1. 4. Click Edit to edit the arming schedule for video tampering. The arming schedule configuration is the same as the setti ng of the arming schedule for motion detection. Refer to T ask 2 Set the Arming S chedule for Motion Detection in Section 6.
User Manual of Network Camera 72 Figure 6-42 Alarm Input Settings 3. Click Edit to set the arming schedule for the alarm input . Refer to T ask 2 Set the Arming Schedule for Motion Detection in Section 6.6.1. 4. Check the checkbox to select the linkage method taken for the alarm input .
User Manual of Network Camera 73 Figure 6-43 Alarm Output Settings 6.6.5 Handling Exception The exception type can be HDD full, HDD error , network disconnected, I P addre ss conflicted and illegal login to the camera s. S teps: 1. Enter the Exception Settings interface: Configuration > Advanced Configuration> Events > Exception 2.
User Manual of Network Camera 74 Figure 6-44 Exception Settings 3. Click Save to save the settings. 6.6.6 Configuring Face Detection Note: Face detection is onl y fo r certain modules, check the specification for wh ether the module supports the function.
User Manual of Network Camera 75 Note ： The face detection is only supported by a certain series of camera modes. And it doesn ’ t support any linkage method.
User Manual of Network Camera 76 6.6.8 Configuring Intrusion Detection Intrusion detection can set an area in the surveillance scene and once the area is been entered, a set of alarm action is triggere d. Steps: 1. Check the Enable Intrusion Detection checkbox.
User Manual of Network Camera 77 part of the object which can trigger the alarm. For example, when y ou set the percentage as 50%, half of the object entering the region will trigger the alarm. Arming Schedule is configured to set the time you want the function to be enabled.
User Manual of Network Camera 78 affected by the external factors; such as the intentional rotation of the camera. Steps: 1. Check the Enable Scene Change Detection checkbox . Sensitivity : Range [1%-100%]. The higher the sensitivity, the easier the change of scene can trigger the alarm.
User Manual of Network Camera 79 Chapter 7 S torage Sett ings Befor e you start: T o configure record settings, please make sure that you ha ve the network storage device within the network or the SD card inserted in your ca mera.
User Manual of Network Camera 80 (4) Click Save to add the network disk. 2. Initialize the added network disk. (1) Enter the HDD Settings interface ( Advanced Conf iguration > S torage > S torage Management ), in which you can view the capacit y , free space, status, type and property of the disk.
User Manual of Network Camera 81 Figure 7-4 Quota Settings Notes: Up to 8 NAS disks can be connected to the camera. T o initialize and use the SD card after insert it to the camera, please refer to the steps of NAS disk initialization.
User Manual of Network Camera 82 Figure 7-5 Recording Schedule I nterface 2. Check the checkbox of En able Record Schedule to enable scheduled recording. 3. S et the recor d parameters of the camera. Figure 7-6 Record Parameters Pre-record: The time you set to start r ecording before the scheduled ti me or the event.
User Manual of Network Camera 83 or 10 min. Note: The record parameter configurations vary depending on the camera model. 4. Cli ck Edit to edit the record schedule.
User Manual of Network Camera 84 the time of the schedule. Record T riggered by Motion Detection If you select Motion Detection , the video will be recorded when the motion is detected.
User Manual of Network Camera 85 Figure 7-8 Edit Record Schedule (3) Check the checkbox of Select All and click Copy to copy settings of this day to the whole week. Y ou can also check any of the checkboxes before the date and click Copy . (4) Click OK to save the settings and exit the Ed it Record Schedule interface.
User Manual of Network Camera 86 Check the Enable Event -trigger ed Snapsh ot checkbox to check event-triggered snapshot. 3. Select the quality of the snapshot. 4. Set the time interval between two snapshots. 5. Click Save to save the settings. Uploading to FTP Y ou can follow below configuration instructions to upload the snapshots to FTP .
User Manual of Network Camera 87 Figure 7-9 Snapshot Settings.
User Manual of Network Camera 88 Chapter 8 Playback Purpose: This section ex plains how to view the remotely recorde d video files stored in the network disks or SD cards. S teps: 1. Click Playback on the menu bar to enter playback interface . Figure 8-1 Playback Interface 2.
User Manual of Network Camera 89 Figure 8-3 Playback T oolbar Table 8-1 Description of the buttons Button Operation Button Operation Play Capture a picture Pause / Star t/Stop clipping video files Sto.
User Manual of Network Camera 90 Chapter 9 Log Sear ching Purpose: The operation, alar m, exception and information of the camera can be stored in log files. Y ou can also export the log files on your demand. Befor e you start: Please configure network storage for the camera or insert a SD card in the camera.
User Manual of Network Camera 91 Chapter 10 Others 10.1 Managing User Accounts Enter the User Management interface: Configuration >Basic Configuration> Security > User Or Configuration > Advanced Configuration> Security > User The admin user h as acc ess to create, modif y or delete other accounts.
User Manual of Network Camera 92 Figure 10-2 Add a User Modif y a User S teps: 1. Left-click to select the user from the list and click Modif y . 2. Modif y the User Name , Level or Password . 3. In th e Basic Permission field and Camera Conf iguration field, you can c heck or uncheck the permissions.
User Manual of Network Camera 93 Delete a User S teps: 1. C lick to select the user you want to delete a nd click Delete . 2. Cli ck OK on the pop-up dialogue box to delete the user . 10.2 Configuring R TSP Authentication Purpose: Y ou can specificall y secure the stream data of live view .
User Manual of Network Camera 94 Figure 10-5 Anonymous V isit 2. S et the Anonymous V isit permission Enab le or Disable in the drop-down list to enable or disable the anonymous visit. 3. Cli ck Save to save the settings. There will be a checkbox of Anon ymous by the next time y ou logging in.
User Manual of Network Camera 95 Figure 10-7 IP Address Filter Interface 2. Check the checkbox of En able IP Address Filte r . 3. S elect the type of IP Address Filter in the drop -down list, Forbidd en and Allowed are selectable. 4. S et the I P Address Filter list.
User Manual of Network Camera 96 (2) Modify the IP address in the tex t filed. Figure 10-9 Modify an IP (3) Click the OK to finish modifying. Delete a n IP Add ress Left-click an IP address from filter list and click Delete . Delete a ll IP Addresses Click Clear to delete all the IP addrsses.
User Manual of Network Camera 97 Figure 10-10 Device Information 10.6 Maintenance 10.6.1 Rebooting the Cam era S teps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance Or Configuration > Advanced Configuration> System > Maintenance: 2.
User Manual of Network Camera 98 Figure 10-12 Restore Default Settings Note: A fter restoring the default s ettings, the I P address is also restored t o the default IP address, please be careful for this action.
User Manual of Network Camera 99 10.6.4 Upgrad ing the Sys tem S teps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance Or Configuration > Advanced Configuration> System > Maintenance 2. Click Browse to select the local upgrade file and then click Upgrade to start remote upgrade.
User Manual of Network Camera 100 Figure 10-15 RS -232 Settings Note: If you w ant to connect the came ra by the RS-232 port, the pa rameters of the RS -232 should be exactly the same with the parameters y ou configured here. 2. Cli ck Save to save the settings.
User Manual of Network Camera 101 Appendix Appendix 1 SADP Software Intr oduction Description of SADP V 2.0 SADP (Search Active De vices Protocol) is a kind of user-friendly and installation-free online device search tool . It searches the active onli ne devices within y our subnet and displays the information of the devices.
User Manual of Network Camera 102 newly searched devices will be added to the list. Note: Y ou can click or on ea ch column headin g to order the information; y ou can c lick to e xpand the device table and hide the network parameter panel on the right side, or click to show the network parameter panel.
User Manual of Network Camera 103 Note: Serial code is a series of characters combined by the start time a nd the serial number of the device. 2. Input the code in the Serial code field and c lick Conf irm to r estore the defa ult password.
User Manual of Network Camera 104 Appendix 2 Port Mapping The following se ttings are for TP-LINK route r ( TL -WR641G). The settings vary depending on dif ferent models of routers. S teps: 1. S elect the W AN Connection T ype , as shown below: Figure A.
User Manual of Network Camera 105 another camera as 81, 80 01, 555, 8201 with IP 19 2.168.1.24. Refer to the steps as below: S teps: 1. As the settings mention ed above, m ap the port 80, 8000, 554 and 8200 for the network camera at 192.168.1.23 2. Map the port 81, 8001, 5 55 and 8201 for the network camera at 192.
User Manual of Network Camera 106.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hikvision DS-2CD4212FWD-IZS è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hikvision DS-2CD4212FWD-IZS - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hikvision DS-2CD4212FWD-IZS imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hikvision DS-2CD4212FWD-IZS ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hikvision DS-2CD4212FWD-IZS, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hikvision DS-2CD4212FWD-IZS.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hikvision DS-2CD4212FWD-IZS. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hikvision DS-2CD4212FWD-IZS insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
