Manuale d’uso / di manutenzione del prodotto High End LCD Controller for Studio Color del fabbricante High End Systems
Vai alla pagina of 272
p/n 60 600079 Vers ion 1.0 LCD Controller for St u d i o Co lo r User Manual ADVAN CE LIGHTWAVE audio level erase reco rd select home page cursor construct PAG E MEMORY INTENSITY MEMORY CARD POWE R STANDBY rate USER auto PRE SET ADDRE SS 1 3 5 7 2 4 6 8 12 3 4 56 7 8 slave Studio Color Hi g h End S y stems Inc.
Studio Color LCD Controller i LCD Controller for St u d i o Co lo r User Manual © 1997 H i gh En d Syst ems, Inc ., Al l R ight s Reser ved Inf ormation a nd Specif ications in this docume nt are sub ject to c hange wit hout noti ce. H igh En d Syste ms , Inc.
ii International Sa les Stud io Color LC D Control ler Intern ation al Sa les T rademarks T radema rks used i n this te xt: Int ellabeam, Lightwa v e Research , the Lig htwa ve Research log o, th e Hi gh End Syst ems g lobe logo, an d Status Cue are regi ste red trademarks of Hig h End Systems, In c.
Studio Color LCD Controller Declaration of Confo rmity iii Declaration of Conformity accor ding to I SO/IEC Guide 22 and EN45104 Manufacturer’ s name: Lightwav e Research Manufacturer’ s address: 2217 W est Braker Lane Austin, T e xas 78 758 U.S.A.
iv Important Safety Information Stud io Color LC D Control ler Important Safety Information INS TR UCTI ONS PE R T AINI NG TO CO NTI NUE D PR O TEC TI ON A GAINST FIRE, ELECTRIC SHOCK, AND INJUR Y TO PERSON S ARE FOUND IN APPENDIX D. READ ALL CA UTIONS AN D W AR NINGS PR IOR TO ASSEMBL Y , MOUNTING, AND OPERA TING THIS EQUIPMENT .
Studio Color LCD Controller Warranty and Conditi ons v W arranty and Con ditions Unpacking and Sa ving the Sh ipping Materi als Do not d iscard the shi pping carton and packin g material s. The c art on an d pa cking mat erial s ar e spe cifically desi gne d to protect the prod uct dur ing trans port.
vi Warranty and C onditions Stud io Color LC D Control ler Limited Warranty Unle ss oth erwi se st at ed, y our pro duc t i s covere d by a tw o year p arts a nd lab or limi ted war ranty . It is the owner ’ s respons ibilit y to fur nish rec eipts or in voices f or v erif ic ation of purch ase, da te, and dealer or distri b utor .
Studio Color LCD Controller Freight vii Freight All shi pping will be pai d by th e purch aser . Item s under warr anty shall have retu rn sh ippin g p aid by the ma nufact urer only in t he Cont inental United S tates. Under no circumst ance s will freig ht co ll ect sh ipmen ts be ac cept ed .
vii i Stud io Colo r LCD Cont roller.
Studio Color LCD Controller Table Of Contents ix T able Of Con tents Introduction Features ......................... ........................... .................. .. intro-1 About This Manual ................ .................. .................... i ntro-4 Note, Caution, Warning Symbols .
x Table Of Conten ts Stud io Color LC D Control ler Chapter 4 Basic Programmi ng Programmin g Overview ............... .................. ................... 4-2 Preparing t o Program .......... .................. ........................... . 4-3 Programmin g Guided Tour .
Studio Color LCD Controller Table Of Contents xi Chapter 6 Advanced Programming Intended Audi ence ................. .................. .......................... 6-2 Using Posi tion Pre sets ........... ........................... ................. 6-3 Address (Fi xture) Par ameter Copy .
xii Ta ble O f Figur es Stud io Color LC D Control ler T able Of Fi gures Figure 1 -1. Locat ion of th e contr oller’ s voltage selec tion switch a nd fuse. ............. .................. .................. .. 1-8 Figure 2 -1. Connector s on the co ntrolle r’s rear pa nel.
Studio Color LCD Controller Table Of Figures xiii Figure 2 -17. Locat ions o f the othe r connect ors on t he controlle r’s rear panel ......................... ............... 2-23 Figure 2 -18. Locat ions o f the power key swit ch, the <Standby > key and Standby LED.
xiv Ta ble o f Tabl es Stud io Color LC D Control ler Figure 7 -1. Slid e the writ e-pro tect bar to the right t o allow the RAM car d to acce pt data, or move it to th e le ft t o pr ev en t it from accepti ng data. ....................... ......... .
xv Ta ble o f Tabl es Stud io Color LC D Control ler.
Studio Color LCD Controller Features Intro -1 Introduction Congratu lati ons on your p urchas e of the Li ghtwa ve Researc h ® Liquid Crysta l Disp lay (L C D) c on troll er for the Studio Col or ™ Automat ed W ash Lumi naire.
Intro-2 Features Stud io Color LC D Control ler • 891 pages (s cenes) •9 m e m o r i e s • Up to 1024 prog rammable pre sets f rom the fr ont pan el through the use of pr eset banki ng . • Up to 1023 prog rammable pre sets u sing an ana log contr oll er, such as the T ouch Dim me r T welve manufa ctured b y High End S ystems, I nc.
Studio Color LCD Controller Features Intro -3 • Shutter st robin g • Color mixing •F l i p • Frost ef fec t • W ide ang le ef fect Playback: • Supports th e MIDI Sho w Contr ol “Go” co.
Intro-4 About This Manual Stud io Color LC D Control ler About This Manual This manual pr ov ides easy -to-f ollo w procedures f or set ting up and usi ng your Studio Color LCD cont roller . It inclu des se v en cha pte rs and four append ic es. First -t ime use rs shou ld begi n thi s manual wit h Chapter 1 .
Studio Color LCD Controller Symbols Intro -5 A ppendix A: Binary Access T able — listi ng of pr eset number s (1 throu gh 1023) , preset k e ys, prese t le vels and analog- to-bi nary c on versions .
Intro-6 Getti ng He lp Stud io Color LC D Control ler Getting He lp U .S. and Canada From 8 a .m. to 6 p.m. (U.S. Cen tral ti me) Monday thr ough Fri day: (800) 890-89 89 24-hour F AX: (512) 834-91 95 24-hour v oice mai l: (512) 837 -3063 or (800) 890 -8989 24- hour Wo r l d Wide W eb site http:/ /www .
Studio Color LCD Controll er 1-1 1 Chapter 1 Preparing to Use Y our LCD Controller Unpacking Your Control ler ..................... .................. ........ 1-2 Save the Shi pping Material s.............. .................. ......... 1-2 Inspectin g the Conten ts .
1-2 Unpack ing Your Control ler Stud io Color LC D Control ler Unpacking Y ou r Control ler First, unpack y our contro ller and v erify t hat it a rri v ed complete and wit hout an y damage . Save the Shippin g Materials Do no t di sca rd the shipping carton and packin g material s.
Studio Color LCD Controller Specifica tions 1-3 1 Specifications This sec tion l ists spe cif icat ions for your Studi o Color L CD control ler . Model and Part Numbers • Model: Studio Color LCD Controll er • Manufactur er: Li ghtw a ve Res earch 2217 W est Brake r Lane Austin, T exas 78758 U.
1-4 Specifications Stud io Color LC D Control ler Class 1 e quipment- F or continue d pr otecti on agains t electric shock, co nnect this equipment to a grou nded power s our ce only . Use in dry locati ons only . RAM Card 256KB Static Random-Acces s Memory (SRAM), T ype 1 PC Card ( nee PCMCIA adapt er).
Studio Color LCD Controller Specifica tions 1-5 1 Cables and Connectors • DMX data cables : Beld en ® 9841 or equi v a lent (meets specif i cations for EIA RS-48 5 appli cations ) with charact eris tics listed b elo w: • 2-conductor t wisted pai r plus a shield • maximum capacitanc e betwee n conducto rs - 30 pF/ ft.
1-6 Optional Ac cessories Stud io Color LC D Control ler Optional Accessories T able 1-1 belo w sho ws the opt ional acc essories for the Studio Colo r LCD co ntro ller a v a ila ble fro m you r High .
Studio Color LCD Controller Setting t he Controll er Volt age 1-7 1 Setting the Controller V oltage At the ti me of this writ ing, the Studi o Color LCD controlle r is shipped from the fact ory set to 230V .
1-8 Setting th e Controller Vo ltage Stud io Color LC D Control ler Set or V erify Controller V oltage T o change or verify the controller’ s input voltage setting, locate the v oltage selection switch on the rear panels shown in Figure 1-1 on p age 1-9.
Studio Color LCD Controller Setting t he Controll er Volt age 1-9 1 Figure 1- 1. Locat ion of t he control ler ’s voltage selecti on swit ch and fuse. Replacing the Fuse Y ou must replace the con troller ’ s fuse wh ene ve r you chang e the v oltage settin g or after the fuse becomes damaged.
1-10 Power Cord C ap Stud io Color LC D Control ler Power Cord Cap If you wi sh to att ach the control ler to a 2 30V A C outlet, you must repl ace the mol ded po w er cord cap pr ovi ded with t he control ler with anothe r suitab le typ e of po w er cor d cap.
Studio Color LCD Controller Power Cord Cap 1-1 1 1 • The core whic h is co lored bro wn must be connect ed to the ter minal wh ich is mark ed with the lett er “L” or colo red red. Class 1 equipm ent: THIS EQUIPME NT MUST BE EARTHED. V igtig Sikkerhedsinformat ion - DANMARK Advars el: Be skytte ls e mod e lektr is k cho c k.
1-12 Power Cord C ap Stud io Color LC D Control ler.
Studio Color LCD Controll er 2-1 2 Chapter 2 Setting Up Y our Controller Rear Pane l Descripti ons .................................... ................. 2-2 Settin g the Switches........................ .................. ................. 2-4 Configuring Switch Bloc k A .
2-2 Rear Panel Descriptions Stud io Color LC D Control ler Rear Panel Descriptio ns Figure 2 -1 sho w s th e locati ons of the connect ors on th e rear panel of the St udio Color LCD controll er . Figure 2- 1. Connect ors on the con troller ’s rear panel.
Studio Color LCD Controller Rear Pane l Descrip tions 2-3 2 MIDI In/Out ports : Where MIDI sign als en ter an d e xit the control ler usi ng standar d MIDI conn ections. The cont roller support s th e MIDI Sho w Control “GO” command. F or more infor matio n , see th e sect ion ti tled “M IDI In and O u t Port s” on page 2- 22.
2-4 Setting the Sw itches Stud io Color LC D Control ler Setting the Switches The tw o blocks of Persona lity DIP (dual i n-line p ackage) swit ches loca ted on t he cont roll er’ s rear p anel a re lab eled A and B. Confi g urin g Switch Block A Switch bl ock A is cur rent ly not use d, and al l four switche s must be set to t he OFF posi tion.
Studio Color LCD Controller Setting t he Switches 2-5 2 Y ou ca n set t he contro ller to oper ate as either a master or a sla v e ( there can be only o ne maste r co ntrol ler pe r link ).
2-6 Setting the Sw itches Stud io Color LC D Control ler Switch B-2: T ime Base Switch B- 2 sets the contr oller’ s in put v olta ge frequen cy at either 50 Hz or 60 Hz. This setti ng must match t he input vo ltage frequenc y of your po wer sou rce becau se the control ler sens es this f reque ncy as part o f its in ternal t iming circ uits.
Studio Color LCD Controller Setting t he Switches 2-7 2 Switch B -5: Bi nary Preset Ac cess Switch B- 5 O f f (def aul t) – (T welve -l e v el pr es et ac ces s.) An analog c ontrolle r acce sses eac h of 8 prese ts on 1 2 independ ent le vels for a tota l of 96 pre sets.
2-8 Setting the Sw itches Stud io Color LC D Control ler Switch B-6 On – Indep endent Pr esets; th e controll er beha v es as fol lows: • The master inte nsity recorded in eac h preset i s ignored . Mast er int en siti e s will remai n as -i s du ri ng p r eset playb ack.
Studio Color LCD Controller Connecting Fi xtures 2-9 2 Connecting Fi xtures The Studi o Color LCD controll er use s its nat i ve DMX 512 protoco l (langua ge) to control S tudio Co lor f ixt ures.
2-10 Connecting Fixture s Stud io Color LC D Control ler 2. Us e the <Up> and <Do wn> arrow buttons lo ca ted to the rig ht of the disp l ay to s ele ct Info , as sh ow n belo w: Figure 2-3. The fixture’s Info menu display s inf or mation about the fix ture, inc luding the ’s current firmware v ersion.
Studio Color LCD Controller Connecting Fi xtures 2-1 1 2 • If the f irmw are v ersio n is ab ov e 38, you ha v e three options : cros sloading f irmwar e from anoth er f ixtu re on the same DMX l ink, using t he Stu dio Colo r Upload Module, or using St atus Cu e.
2-12 Connecting Fixture s Stud io Color LC D Control ler 1. K eep pressing the <M enu> b utton on t he f ixtur e until the menu appear s as s how n belo w: Figure 2-5. The cont roller ’s Addr (ess) me nu allows y ou to set an f ixture n umber from 1—8 so the control ler will reco gnize the fixtu re.
Studio Color LCD Controller Connecting Fi xtures 2-1 3 2 Howev er , the St udi o Col or fixture has several buil t-in random (or unsync hronized) ef fect s which wo rk randomly e ven if multipl e f ixtures are as signed th e same f ixtur e number . For mor e info rmation, see the sectio n title d “Programming Hints” on page 3-2.
2-14 Connecting Fixture s Stud io Color LC D Control ler 4. Pr ess t he <Enter> b utton, the n use th e <Up> and <Down> arrow b u tt ons to sel ect ADDR as sho wn belo w: Figure 2-9. Configu ring the fix ture to b e contro lled by fixture numbers r ather than DMX 512 ad dresses.
Studio Color LCD Controller Connecting Fi xtures 2-1 5 2 Constructing Cabling Y ou sho uld con struc t cables using s hielde d, tw o-condu ctor cable wi th a male 3- pin XLR co nnector at one en d and a female 3- pin XLR connec tor on the other end. Pi nouts for both ma le and fema le XLR conn ectors ar e sho w n in Figure 2-10.
2-16 Connecting Fixture s Stud io Color LC D Control ler Te r m i n a t o r s The last de vice o n each lin k must ha ve a 120 ohm, 1/ 4 watt (minimu m) te rm inat or att ached to its D ata Ou t conne ctor . Y ou c an co nstru ct te rm inat ors by fo llowing t he ins tru ct ion s in Figur e 2-11: Figure 2-1 1.
Studio Color LCD Controller Connecting Fi xtures 2-1 7 2 • A seria l d ata di stributo r must b e u sed if eithe r of the follo wing is tr ue: • Y ou wish to con nect more t han 32 f ixtures to a contr oller or more than 3 2 mast er/slave co nt rol le rs togethe r .
2-18 Connecting Fixture s Stud io Color LC D Control ler Because e ach f ixtu re has a unique f ixture number , each one responds to command s from the contro ller ind ependentl y from the ot her fixt u res. Since fe wer than 32 St udio Color f ixtures are at tache d to the control ler and b ecause no cable s pans more than 500 f t.
Studio Color LCD Controller Connecting Fi xtures 2-1 9 2 be link ed to a l ight ing consol e via i ts MIDI, RS-23 2C or analog p orts. On ly the master control ler (not the sl av es) can accept commands fr om the lig hting cons ole.
2-20 Master and Slave Controllers Stud io Color LC D Control ler 5. Con nect ot her de v ices t o the Stud io Color f ixtur es as des ired, using t he inst ruction s in th e documentat ion pr ovide d with those de vices. 6. Pl ace a male 120 ohm te rminator o n the f emale Data Ou t connect or of the l ast d evi ce in the link.
Studio Color LCD Controller Master a nd Slave Cont rollers 2-2 1 2 1. Se t persona lity switch B-1 o n the r ear panel of each sl a v ed control ler to ON. Refe r to Figur e 2-1 on pag e 2-2 for t he locati on of the s witche s. The Sl av e LED (located abo v e the Power key swit ch) tu rns O N.
2-22 MIDI In and Out Ports Stud io Color LC D Control ler MIDI In and Out Ports The cont roller sup ports the MI DI Sho w Control ( MSC) “GO” command, a sub set of th e MIDI (Musica l Instr ument Digital Interf ace) specif ication.
Studio Color LCD Controller Other Connector s 2-2 3 2 Other Connectors This sec tion d escribes ho w to c onnect cab ling t o the othe r connect ors on t he contro ller ’ s rear pane l.
2-24 Other Connec tors Stud io Color LC D Control ler Remote Enable port: Use t he Remot e Enable si gnal to enab le and dis able th e con troll er fr om a remote l ocation .
Studio Color LCD Controller Rack Mounting the Control ler 2-2 5 2 Rack Mounting the Co ntroller After c onf igurin g the c ontrolle r and conne cting cables as descri bed ear lier in this chapter , you can mount the St udio Color LCD control ler in a standard 19-inch ra ck as descri bed in thi s sec ti on.
2-26 Powering On th e Controller Stud io Color LC D Control ler Powering On the Cont roller Before c ontinu ing, make sure yo u hav e done all of th e followin g: 1. Se lect ed the cont roll er’ s v olt age and frequenc y as described in the sec tio n titl ed “ S etti ng the C ontro lle r V ol tage” on pa ge 1-7 .
Studio Color LCD Controller Powering On the Controller 2-2 7 2 3. Ins ert t he cont roll er power key int o the c ont ro lle r’ s fro n t panel po wer ke y switch an d turn t he k ey cl ockwise . The locati on of the k ey switch is sho wn i n Figure 2- 18.
2-28 Powering On th e Controller Stud io Color LC D Control ler • If the conten ts of me mory and t he RAM card do not match, th e message belo w is displayed . If yo u want to sa ve your progr amming to the RAM car d, you must use the back up inst ruct ions i n Chapte r 5.
Studio Color LCD Controll er 3-1 3 Chapter 3 Overview of Controller Operation Programming Hin ts ......................... .................. ................. 3-2 Color to Cont rol .............. .................. .................. ......... 3-2 Beam Shaping .
3-2 Programming Hints Stud io Color LC D Control ler Programming Hint s This sec tion gi ves you a b rief o v er vie w of some of the ef fects you can pr ogram us ing the St udio Col or LCD contro ller . Color to Control The Studi o Color fix ture of fers you a number of pre- programmed color ef fects to cho ose from.
Studio Color LCD Controller Programming Hints 3-3 3 Beam Shaping The Lens 1 a nd Lens 2 construc ts (c orrespondi ng to the two Studio Col or ef fects wheels) control b eam shapi ng. Each ef fec ts wheel ha s four pos ition s (three ef fect s plus open ).
3-4 Front Panel Desc riptions Stud io Color LC D Control ler Front Pa nel Descrip tions Figure 3 -1 is the f irst of two draw ings tha t sho w g roups of ke ys on t he contr oller ’ s front pan el. Descri ption s of thes e ke y grou ps follo w the fi gure.
Studio Color LCD Controller Front Pane l Descrip tions 3-5 3 Address LED i s ON to indicat e a fixtur e correspondi ng to that f ixt ure numbe r has b een progra mmed with i ts li ght gate (s hut te r) o pen. •I n Preset mode , these k eys corresp ond to e ight programmabl e preset s in e ach of the 128 pr eset ba nks .
3-6 Front Panel Desc riptions Stud io Color LC D Control ler RAM card s lot: Inse rt a RAM card (T ype 1, 256KB SRAM PC Car d) in t o th is slot to sto re a co py of t h e cont roll e r’ s operati ng sys tem, to ins tall an u pdated versi on of the operati ng sys tem, or to t ransfer progra ms into or o ut of t he contro ller’ s memory .
Studio Color LCD Controller Front Pane l Descrip tions 3-7 3 Figure 3- 2. Second of t wo drawing s showing groups of keys on the Studio Color LCD contr oller’s front panel . Construct /Cursor/P age co ntr ol k eys: • Construct Up and Down arr ow keys: C hange the para meter ( v alue ) of the selec ted con struc t.
3-8 Using the Constru ct Keys Stud io Color LC D Control ler Cons tru ct ke ys: Allo w you to progra m Stud io Color fixtures . For more in form a tion, see th e sectio n titl ed “U sing the Constru ct K eys” on page 3-8.
Studio Color LCD Controller Using the Construct Keys 3-9 3 Gate K ey Use this ke y to ope n or cl ose the g ates ( shutter s) of sel ecte d f ixtures, or to s elect from 60 st robe speed s numbere d 0 (slowest ) to 59 (fas test) .
3-10 Using the Constru ct Keys Stud io Color LC D Control ler Select ing a pa rtic ular c olor const ruct sho ws y ou the compl ementa ry co lor for that c o nstru ct.
Studio Color LCD Controller Using the Construct Keys 3-1 1 3 Lens 1 Key See also “Lens 2 K ey” on page 3- 16. The tw o Studi o Color effects wh eel s are c o ntro l led by t h e Lens 1 an d Lens 2 constr ucts. Each wh eel has four positions (three ef fects plus open ).
3-12 Using the Constru ct Keys Stud io Color LC D Control ler MSpeed Key (Can b e referr ed to as “ motor” o r “mo vem ent” speed .) The MSp eed c onstr uct de term in es the total lengt h of tim e a beam will requi re to mo v e fro m one posi tion to anot her .
Studio Color LCD Controller Using the Construct Keys 3-1 3 3 92 0.94 59 25.80 26 85.59 91 1.18 58 27.10 25 87.95 90 1.45 57 28.44 24 90.33 89 1.76 56 29.80 23 92.76 88 2.09 55 31.19 22 95.21 87 2.46 54 32.62 21 97.69 86 2.86 53 34.08 20 100.21 85 3.30 52 35.
3-14 Using the Constru ct Keys Stud io Color LC D Control ler Xfade Key (Cro ssfade. ) Cro ssfade affects o n ly the foll owin g Stu dio Color f ixtu re fe atures: Dim, Lens 1, Lens 2 an d color mixing. Xfade is the leng th o f tim e requ ired for a value ch ange in on e of the f our Xfa de const ructs t o complet e.
Studio Color LCD Controller Using the Construct Keys 3-1 5 3 Dim K ey Use th i s key to set the be a m inte n sity level for al l se le cted f ixture nu mbers, from 0 (f ull dark) to 99 ( full bri ght). Note The tra nsitio n time of this co nstr uct is s et usi ng the XF ade constr uct.
3-16 Using the Constru ct Keys Stud io Color LC D Control ler The displ ay bel ow s elect s a color between the half -color combinat ion 2 an d 3 (3/4 CT O and Pi nk) an d positio n 3: See also “CSpeed” on page 3-2 1. The fa ctory conf igura tion of t he color wh eel is sho wn b elo w: Figure 3-4.
Studio Color LCD Controller Using the Construct Keys 3-1 7 3 Lens 2 has t he fol lowing effect s: • Beam shaping : A l ong, narro w bea m rotates int o a short, f at beam. Construct v alues between appr oximately 100 (39%) a nd 220 ( 86%) select beam sha ping.
3-18 Using the Constru ct Keys Stud io Color LC D Control ler 4. Pr ess the <Gate> k ey and use th e Constr uct <Up> an d <Do w n> arro w k eys to sel ect / . 5. Us e the jo ystick to direct the beam at a refe rence point (w all , scree n, or o ther surfa ce).
Studio Color LCD Controller Using the Construct Keys 3-1 9 3 Position Key (POS) Use this ke y to se lect one of 99 use r -pro grammable pos itio n preset s. (Y ou do not need t o press t his k e y if you w ant t o manually posit ion the bea m as desc ribed belo w .
3-20 Using the Constru ct Keys Stud io Color LC D Control ler suppose y ou ha v e progra mmed al l 99 pages of memory 9 as posi ti on pr ese ts. All 99 po sit i on pre se ts are a v ail able for f ixture number 1, a ll 99 posi tion preset s are a vailabl e for fix ture number 2, etc.
Studio Color LCD Controller Setting CSpeed 3-2 1 3 CSpeed This opt ion is accessib le onl y thr ough the me nus . F or more informat ion on acc essin g menus, se e the sec tion tit led “Setti ng CSpeed” on page 3-2 1.
3-22 Setting CS peed Stud io Color LC D Control ler 4. Y o u have the op tio ns s hown bel ow: Y ou ca n selec t either ) * (def ault; ch ange occurs a s quic kly as poss ible) or ) * (change occurs smoot hly o ve r the MSpeed time va lue).
Studio Color LCD Controll er 4-1 4 Chapter 4 Basic Programming Progra mmin g Ove rvi ew ...... .... .... ... ........ ... .... ....... .... ....... .... ....... .... ....... .. 4-2 Page, Co nstruct, Parameter, L oop .... ........... ....... ........ .
4-2 Pro gramm in g Overv iew Stud io Color LCD Cont rolle r Programming Overview The Studi o Color LCD controll er has 9 separat e memories, each contai ning 99 pag es, for a tot al of 89 1 pages of pro gram storag e. Y ou ca n think of the con troller ’ s memory as being l ike a book.
Studio Color LCD Controller Preparing t o Program 4-3 4 Preparing to Program Before b eg inning an y pr ogrammin g, make sure the co ntr oller appears as sho wn belo w: Figure 4-1.
4-4 Programming Guided Tour Stud io Color LC D Control ler Programming Gu ided T our This sectio n leads yo u step -b y-st ep throu gh cr eatin g a simp le four -pa ge program, p laying back the p rogram pa ge-by -page, creati ng a loop a nd reco rding a pr eset.
Studio Color LCD Controller Programming Gui ded Tour 4-5 4 9. Pr ess the < Reco rd> key to sa v e page 1. Notic e that th e Address LEDs of all f ixture numbers you sel ected ar e no w ON. This is becaus e the shut ters of these f ixtures are ope n (you selec ted / for th e Gate cons truc t in St e p 5.
4-6 Programming Guided Tour Stud io Color LC D Control ler 10. Use the jo ystick t o posi tion the b eam in a dif fer ent place of your choosi ng. 11. Press the <Record> key to s ave pa ge 2 . Recording Page 3 1. Pr ess the <Selec t> ke y; it flashes .
Studio Color LCD Controller Programming Gui ded Tour 4-7 4 Manually Playing Back Pages 1 Thro ugh 4 1. Us e the P age <Up> and <Down> arro w ke ys to select page 1 , as shown be low: 2. Th e fi xture(s) pr ogrammed for page 1 shoul d no w display t he colo r and posi tion yo u sele cted f or them.
4-8 Programming Guided Tour Stud io Color LC D Control ler 3. Pr ess the < Erase> k ey . The LCD disp lay app ears a s sho wn bel o w: 4. Pr ess the < Erase> k ey t o un-i nitiali ze page 5. 5. Us e the P age <Down> ke y to sele ct pag e 1.
Studio Color LCD Controller Programming Gui ded Tour 4-9 4 3. Pr ess the n umbered Pres et k e y where you w ant t o record t he preset . F or e xample , t o recor d pres et number 1 , pr ess th e <1 > key . Note The St udi o Co lor LCD contro ll er su ppor ts up to 102 4 preset s from the f ront pane l thr ough the us e of pr eset banking .
4-10 Creating a Program Stud io Color LC D Control ler Creating a Program This sec tion g iv es you detaile d step-b y-s tep inst ructions for creati ng a progr am. F or a qui ck step- by- step o v ervie w , see the sec tion t itled “P rogramming Gui ded T our” on page 4- 4.
Studio Color LCD Controller Creating a Program 4-1 1 4 Step 3: Pres s the Sel ect Key Press t he <Sel ect> key to be gin pr ogramming. The Select LED flashe s and the LCD d ispla y appears as sho wn belo w: Step 4: Select Fixtur e Number Press t he Address k eys corresp onding t o all f ixtu re number s you wish t o program.
4-12 Creating a Program Stud io Color LC D Control ler Step 6: Pres s the R ecord Ke y When you are f inished editi ng constr ucts, pre ss the <Rec ord> ke y to s av e your page. Note Afte r recordi ng the page, the a ddress LEDs of all f ixtur e numb ers with the Gate constr uct s et to / come ON.
Studio Color LCD Controller Page Copy 4-1 3 4 Page Copy Use p ag e copy to copy th e enti re con tents of a pr ogra mmed page to a ny other page in an y other memory . This i s useful for crea ting ad ditional pages that co ntain only s light ch anges, such as mo vement changes or si ngle-par ameter cha nges.
4-14 Creating a Loop Stud io Color LC D Control ler Creating a L oop A loop is a seque nce of pages that repeats conti nuously unt il you stop it. Y ou can v ary t he rate o f play back using t he <Rat e> knob . Y ou must perform t he two ba sic st eps sho wn belo w: Step 1.
Studio Color LCD Controller Creating a Loop 4-1 5 4 Y ou ca n record o v er an un- init ialized page wit h a programmed page at any t ime. Note The co ntrol ler a utomatical ly pl aces an un-in itiali zed “page” be tween pa ges 99 and 1 , as sho wn in Figure 4-4.
4-16 Block Copy (and R everse) Stud io Color LC D Control ler 3. Pr ess the < Erase> k ey . The LCD disp lay app ears a s sho wn bel o w: 4. Pr ess the < Erase> k ey a gain to un-i niti alize t he page. 5. Re peat step s 1 to 4 for the s econd or en ding un- init ialized page.
Studio Color LCD Controller Block Copy ( and Revers e) 4-1 7 4 3. Pr ess the <A uto> ke y , lo cated to th e right o f the jo yst ick. The LCD displa y then a ppears si milar to the one sho wn be lo w: 4. Se lect the memory and fi rst pa ge of the b lock of pa ges you want to cop y from.
4-18 Setting Rate and Delay Time Stud io Color LC D Control ler Setting Rate and Delay T ime Befo re conti nuin g, make su re the contr oller is read y for programmin g as sho wn in Figure 4-1 on page 4- 3. Y ou ca n contr ol the sp eed of your l oop using t he <Rate> knob and th e Del ay co nstr u ct.
Studio Color LCD Controller Preset Programming 4-1 9 4 V arying t he Dela y T ime The Delay (time) construc t sets t he amount of time you w ant the cont roll er to paus e on the current page be fore adv ancing to the next p ag e.
4-20 Preset Prog ramming Stud io Color LC D Control ler Notes (1) Audio adv a nce is independ ent of th e prese ts. F or more inf ormation ab out audi o trigge ring, see the sectio n title d “ A udio Input Pla yback” o n page 6- 27. (2) T o pre vent ina dvert ent er asure of prese ts, you canno t direct ly er ase pag es used as preset s.
Studio Color LCD Controller Preset Programming 4-2 1 4 Recording a One-Page Prese t 1. Us e the Const ruct and P age <Up> and <Down> arrow k e ys to select the memory an d page yo u want to recor d as a preset. 2. T oggle the <Address>/<Pre set> ke y unt il th e Preset LED turn s ON.
4-22 Preset Prog ramming Stud io Color LC D Control ler Recording a Loop as a Preset Start t he loo p running, t hen assi gn the e ntire lo op to on e of the Pres et k eys. For more in format ion about l oops, s ee the sectio n title d “Creatin g a Loop” on page 4 -14.
Studio Color LCD Controller Preset Playback 4-2 3 4 • Advanc e setti ngs: • Random, Audio 1, Audio 2: see “ Audio Input Playback ” on page 6-27. • Auto: see “S etting Rat e and Delay T ime” on page 4-18. • Effect s set tings: Co lor modulat e and I ntensity (dim) modulate .
4-24 Preset Playb ack Stud io Color LC D Control ler Things to Remember • T o change to anothe r pres et at an y time, switch to t he bank cont ainin g the pres et and press the correspo nding Preset ke y . • If a preset i s playin g back a loop, you can quit p laybac k by pr essi ng the <A uto> ke y unti l the Auto LED turns OFF .
Studio Color LCD Controller Viewing and Editin g Programs 4-2 5 4 V iewing and Editin g Programs Once your pages ar e programmed , you can vie w or edit the pages you progra mmed and cha nge an y const ructs or parame ters you wish.
4-26 Viewing Fixtures Stud io Color LC D Control ler 4. A summ ary o f all c onstr ucts a nd pa ra meters for th at fixture number appe ars, s imilar t o the one sh o wn bel o w: Most f ields are se lf-e xplan atory; belo w is a brief d escript ion of some of the f iel ds: • ; : Displays th e MSpee d settin g.
Studio Color LCD Controller Erasing Pages 4-2 7 4 Erasing Pages Y ou may w ant to e rase a page when th ere ar e undesir able or old pages in memor y .
4-28 Master Di m Stud io Color LC D Control ler Master Dim The sample LCD displ ay belo w shows a va lue of 88 for Intens ity (a lso ca lled master d im ). The v alue of 99 is maximum inte nsity (f ull br ight) an d 0 is the minimu m inten si ty (fu ll dim).
Studio Color LCD Controller Homing Fixtures 4-2 9 4 Homing Fixtures Homin g a fixtu re c ause s its s hutte r to clos e, its lam p to s trike (if off), an d for al l whee ls an d mo tors to retu rn to t heir h ome (defau lt) pos i tions . 1. At any t ime, pre ss the <Home> ke y on t he cont roller ’ s front pane l.
4-30 Homing Fix tures Stud io Color LC D Control ler.
Studio Color LCD Controll er 5-1 5 Chapter 5 Using the Menus Overview.............. .................. .................. .......................... 5-2 Navigating the Menus ..................... .................. ................. 5-4 Summary ......
5-2 Overview Stud io Color LC D Control ler Ove rvi ew Figure 5 -1 sho w s an ov eral l vie w of the menu system: Figure 5-1. The Studi o Color LCD controller ’s menu syste m.
Studio Color LCD Controller Overview 5-3 5 • Help: On-scr een help f or all Main menu option s. • Backup: Opti ons for t ransf erri ng control ler me mory t o and from a RAM card an d for back ing up the cont ro ller ’ s operati ng sys tem to a RAM card .
5-4 Navigating the Menus Stud io Color LC D Control ler Navigating th e Menus This sec tion e xplai ns ho w to u se the menu syst em. More infor matio n is con taine d in su b sequ ent se ction s in th is chap ter . Summ ary • Press th e <Menu> key to e nter and exi t the menu system.
Studio Color LCD Controller Navigating the Menus 5-5 5 the M ain menu . Y ou use the Constr uct, Cur sor and P age arrow k eys to na vigate in th e menu system. These ke ys are sh own in Figure 5-2 : Figure 5- 2. The menu navigati onal keys: Construct , Cursor a nd Page.
5-6 Navigating the Menus Stud io Color LC D Control ler bel o w: Pressi ng the Cu rsor <Down> arr ow k ey agai n has no ef fect, since t here are no menu it ems belo w , .
Studio Color LCD Controller Navigating the Menus 5-7 5 Multi-Page Menus Some of the Help menus ar e more than one page l ong. Y ou use th e Con struc t <Up> and <Do wn> ar ro w k eys t o scro ll through those mul ti-page menus.
5-8 Selec ting MS C or LS C Stud io Color LCD Cont rolle r Selecting MSC or LSC MIDI Sho w Cont rol (MSC) and Lightw av e Show Contr ol (LSC) are two dif f erent protocol s (lan guages) that ac hie v e the same e f fect: coord inating a nd control ling playback of mast er con tro ll ers.
Studio Color LCD Controller Selecting MSC or LSC 5-9 5 3. Pr ess the Cu rsor <Down> arrow k ey to dis play th e menu options sho wn be lo w: 4. Use t he Cursor <Right > and <Left> ar ro w k ey s to se lect ;) , as sho wn belo w: 5.
5-10 Selec ting MS C or LS C Stud io Color LCD Cont rolle r If you a r e con tinui ng fr om the pr evious s ection, be gin wit h Step 3 . 1. En ter the men u syst em by pre ssing the <Menu> key . 2. Sel ect ; from the Main menu , as sho wn belo w: 3.
Studio Color LCD Controller All-Memory Play back 5-1 1 5 All-Me mory Pl ayba ck This sec tion d escribes ho w to a uto adv ance or random adv ance throug h all 99 pa ges in all nine memories . (Only initial ized, or progr ammed, pages wi ll play ba ck.
5-12 Loc king /U nloc kin g Memo ry Stud io Color LCD Cont rolle r Locking/ Unlocking M emory Use the memory lo ck fu nc tion t o lock o u t all pag es in a memory so t hey cannot be e dited or erase d without t he memory first b eing un locked. L ocking a memo ry also pre v ents edi ting of any prese t referr ing to an y pa ge in that memory .
Studio Color LCD Controller Locking/Unlo cking a Fi xture 5-1 3 5 Locking/ Unlocking a F ixture This fe ature tem porar ily removes a fixt ure from all pag es. This mi ght be nec essary in the e vent of a f ixture malfunc tion or if yo u wan t to re move a fixt ure for a sp ecial event or ef fec t.
5-14 Erasing All Memory Stud io Color LC D Control ler Erasing Al l Memory The Erase All fu nction pr ovi des a quic k way to cle ar all programmin g (all unlock ed memor ies, a ll page s, all prese ts).
Studio Color LCD Controller Setting t he Backligh t Int ensity 5-1 5 5 Setting the Backlight I ntensity Y ou ca n set the i ntensit y (bri ghtness) of the LCD di splay backli ght to high (the def ault), l o w , or of f. 1. En ter the men u syst em by pre ssing the <Menu> key .
5-16 Setting the Backlight Inten sity Stud io Color LC D Control ler.
Studio Color LCD Controll er 6-1 6 Chapter 6 Advanced Programming Who Should Use this Chapt er.................. .................. ........ 6-2 Using Posi tion Pre sets ........... ........................... ................. 6-3 Recording Pos ition Prese ts .
6-2 Who Should U se this Chap ter Stud io Color LC D Control ler Who Sho uld Use this Chapt er This c h apter is inte nded for us ers al ready familiar with control ler oper ation and with t he basi cs of prog ramming. I n many c ases, d etails s uch as ho w to ente r or e xit t he control ler’ s menu sy stem ha v e been omitted .
Studio Color LCD Controller Using Position Preset s 6-3 6 Using Posit ion Presets The con troller has a time-sa ving featur e called posi tion preset (also calle d positio n me mory or pr eset posit ionin g ). Po sitio n preset s allo w one page to refer to ano ther page for pan and ti lt (posi tion) infor mation .
6-4 Using Pos ition Presets Stud io Color LC D Control ler The full set o f 99 posit ion pr esets is a v ailabl e for al l f ixtur es connect ed to the c ontrol ler . F or e xample, s uppose you h a ve programmed all 99 pages of memor y 9 as po sition p resets.
Studio Color LCD Controller Address Parameter Copy 6-5 6 4. Pr ess the <POS > (Positi on) con struct k e y and use t he Construc t <Up> and <Do wn> arro w keys t o sele ct a posit ion preset . (A v alue of B/;:7H indica tes yo u are usin g manual positi oning, n ot preset posit ioning.
6-6 Address Parameter C opy Stud io Color LC D Control ler Edit/C opy The Edit/Cop y fea ture has tw o opti ons : • “Shar e all Constructs until sel ected ” (the d efault): Copies al l of a f ixture ’ s constr uct pa rame ters to t he f ixture( s) you h a ve se lecte d to “cop y to”.
Studio Color LCD Controller Address Parameter Copy 6-7 6 Copy Parameters to Another Fixture, Same Pag e 1. Se lect the memory and page conta ining the f ixtu re with th e para meters you wish to cop y . 2. Pr ess the <Selec t> ke y , then press the Address ke y with t he constr uct paramet ers you w ant t o cop y .
6-8 Address Parameter C opy Stud io Color LC D Control ler Copy Parameters Fr om One Page to Ano ther Pag e 1. Se lect the memory and page conta ining the f ixtu re with th e para meters you wish to cop y . 2. Pr ess the <Selec t> ke y . The LCD displ ay appear s as sho wn bel o w: 3.
Studio Color LCD Controller User Key Macros 6-9 6 User Key Macros The contr olle r has eigh t front p anel Use r ke ys t hat can be used to store cus tom macr os (a recorded serie s of up to 256 ke ystr okes); f i v e of the f irst six k eys ha v e pre-pro grammed def ini tions tha t you ca n use or r ecord o v er .
6-10 User Key Macros Stud io Color LC D Control ler 3. Th e select ed User k ey ’ s LED flas hes, ind icating you are recor din g . Every keys troke y ou ma ke from now on is recorde d in this macro. Th e macro acce pts up to 256 keystrokes . See the exam ple b elow .
Studio Color LCD Controller User Key Macros 6-1 1 6 6. Sel ect t he me mor y an d p age ( des tina ti on) you wa nt to copy the cont ents o f the cur rent page to: • Press th e Cu rsor <Up> and <Do wn> arro w ke ys to change the me mory n um ber .
6-12 User Key Macros Stud io Color LC D Control ler Erasing a Single User Key T o erase one of the User ke ys, r eco rd a ze ro- ke ystrok e macro o ver t he old macro us ing th e inst ructions in thi s sec tion. Note Erasing an indi vidual User ke y doe s not r eturn it to its defa ult de fi nition.
Studio Color LCD Controller User Key Macros 6-1 3 6 Accessing Default Definitions This sec tion d escribes ho w to a ccess the six de fault User k ey def ini tions aft er an y or al l of the se k eys hav e been redef ine d as ma cros. Note Y ou can restore all six User k eys t o thei r origi nal pre- programmed state b y er asing a ll User k eys .
6-14 User Key Macros Stud io Color LC D Control ler Erasing All User Keys Erasing all Us er ke ys de letes an y custom macros you h a ve programmed and retur ns the eight User ke ys to their def ault def ini tions. (M emories, pa ges, pr esets , submaster s, menu choices and the control ler’ s opera ting s ystem are n ot af fec ted.
Studio Color LCD Controller Analog Inputs Port s 6-1 5 6 Analog Inputs Ports Y ou ca n attach a n analo g control ler to t he tw o Analog Inputs ports l ocated on the St udio Col or LCD contr olle r’ s rear panel to perf orm an y of the foll owi ng functio ns: • Remote p age access: Remotely pl ay bac k pages fr om the me mory .
6-16 Remote Page Acc ess Stud io Color LC D Control ler Remote Page Access The remote page ac cess fea ture all o ws you to r emotely pl ay back page s from t he memory t hat you f i rst sel ect on the control ler’ s fro nt panel. (Y ou cannot remot ely s elect or change memories.
Studio Color LCD Controller Remo t e Pa ge Ac c e ss 6-1 7 6 c. Channe ls 10, 11, an d 12 when used i n combinat ion with other channel s become functi on k eys a s e xplaine d belo w: • Channel 10 is a t en-t im es m ult i pli er . F or e xam ple , i f you simul taneous ly enable channe ls 5 and 10, y ou call up pag e 50.
6-18 Remote P reset Acce ss Stud io Color LC D Control ler Remo te Pres et Acc ess T welve-le vel prese t access a nd bina ry pre set acces s allo w you to do one or bo th of the follo wing: • Play back indi vidual pages or loop s (e v en ind iv idual pages wit hin loops ).
Studio Color LCD Controller Remote Preset Access 6-1 9 6 Using T welve-Level Preset Access T welve-le vel prese t access a llo ws you to rec ord and play back up t o 96 pre sets (12 s ets or l e v els of ei ght pres ets ea ch). Record ing in T welve-L evel Pr eset Acc ess 1.
6-20 Remote P reset Acce ss Stud io Color LC D Control ler audio 1 a nd 2 adv ance (page 6-2 7), color modulat e (page 6-27) an d dim modul ate (page 6-27) as need ed. These setti ngs are st ored wi th the pr eset. 9. Pr ess the < Reco rd> key .
Studio Color LCD Controller Remote Preset Access 6-2 1 6 Using Binary Preset Access Binary pre set ac cess allo ws you to record and play back up to 1023 pres ets ( the f irst 1 0 analo g control ler channe ls act as binar y di gits) .
6-22 Remote P reset Acce ss Stud io Color LC D Control ler auto adv ance (page 4 -18), au dio 1 and 2 adv ance (page 6-27), color modul ate (page 6- 27), and dim modula te (page 6-27) as needed. Th ese se ttings ar e sto red with t he preset . 6. Con ver t the pre set nu mber you wi sh to use t o a bi nary number usin g Appendix A.
Studio Color LCD Controller Submasters 6-2 3 6 Playing Ba ck in Bina ry Preset Access Appendix A list s all of the bin ary preset ac cess combi nations.
6-24 Su bmas ter s Stud io Color LC D Control ler Selecting a Submaster Mode There ar e tw o submast er modes: Pr oportion al le vel or Remo te le vel. • Pro portio nal Le vel s ubmasters (typical setting ): T raditional submast er cont rol. The submas ter v alue is multiplie d by th e programmed f ixture v alue.
Studio Color LCD Controller Submasters 6-2 5 6 Assigning a Channel for Master Dim This sec tion e xp lains ho w to u se a sub master as the “mas ter dim contr oller”. Once you a ssign a channel f or master dim, the same c hannel cannot be used to control f ixtures.
6-26 Su bmas ter s Stud io Color LC D Control ler Y ou c an sk ip the first two ste ps be low if you are co nti nu ing from the pre vious secti on. 1. Sel ect ; from th e Mai n menu , as sh own below: 2. Th e LCD display then ap pears si milar t o the one s ho wn bel o w: 3.
Studio Color LCD Controller Audio Input Play back 6-2 7 6 Audio I np ut Playba ck Y ou ca n use an e xter nal ster eo source to cont rol p layback through an y or all f our playba ck modes l isted be lo w . Audi o input pl ayback af fect s ho w init iali zed pages p lay bac k, re gardl ess of whet her those pages are part of a lo op or not.
6-28 Audio Input Playba ck Stud io Color LC D Control ler V arying the Aud io Sensitivity Adjust t he sensit i vity o f the a udio adv a nce modes to the audio sign al using the <A udio> (le vel ) knob located dir ectly to the right of the <Rate> knob .
Studio Color LCD Controller Random Advance 6-2 9 6 Random Advance Random adv ance when used with auto a dv ance , manual adv ance or audio a dv ance (and opti onall y all-memory playbac k) pla ys initi alized pa ges in ran dom order . ( Random adv ance when enab led b y itse lf does no thing.
6-30 Remote E nable Stud io Color LC D Control ler 3. T o return f rom “l i v e” con trol pre ss the <Sel ect> key . The Select LED stops flashing and the selecte d f ixture s return to their origi nal pr ogrammed s ettin gs.
Studio Color LCD Controller Lightwave Contr ol Cent er 6-3 1 6 Lightwave Co ntrol Center Select ing Lightw a v e Show Con tr ol (LSC) as des cribe d i n th e sectio n title d “Selecti ng MSC o r LSC” on page 5-8 means you must us e the Li ghtwa ve Control Ce nter (L CC) softw are for pla yback c ontrol us ing bin ary prese t access.
6-32 Lightwave Con trol Center Stud io Color LC D Control ler.
Studio Color LCD Controller 7 - 1 7 Chapter 7 External Memory Storage and Transfer Overview .. ................. ........... ........... ........... ................. ............ .... 7-2 RAM Card Option s ............. ........... ........... ......
7-2 Overview Stud io Color LC D Control ler Ove rvi ew This chapter de scri bes opt ions fo r backing up and r estor ing the cont roll er’ s inter nal memory an d opera ting syst em. Y ou ha ve dif ferent opti ons depending on wh ether you use a RAM card or a personal compute r .
Studio Color LCD Controller Overview 7-3 7 Personal Computer Op tions In addit ion to ba cking up and re storing c ontrolle r memory using a RAM ca rd, you c an also ba ck up (d o wnload ) and restor e (upload ) memories, p ages an d presets using a persona l comput er .
7-4 RAM Card: Memory Stud io Color LC D Control ler RAM Card: Memory This sec tion e xplai ns ho w to: • Copy all o f the cont roll er’ s inter nal memory t o a RAM car d • Load or restore t he .
Studio Color LCD Controller RAM Card: Memory 7-5 7 2. Pr ess the <Menu> key to enter the menu s ystem. 3. Use the Cursor <Rig ht> an d <Lef t> arrow keys to sele ct ? from the M ai n men u , as s hown below: 4.
7-6 RAM Card: Memory Stud io Color LC D Control ler 6. I f you wan t to ca ncel the backup oper ation at this t ime pr ess the <Select> ke y or the Cursor <Up > arro w key . Other wise, press t he < Record> k e y agai n if you ar e sure t hat you want to comple te this backup op erati on.
Studio Color LCD Controller RAM Card: Memory 7-7 7 3. Use the Cursor <Rig ht> an d <Lef t> arrow keys to sele ct ? from the M ai n men u , as s hown below: 4.
7-8 RAM Card: O/S Stud io Color LC D Control ler RAM Card: O/S This sec tion e xplai ns ho w to b ack up, r eplace or update the control ler’ s oper ating system fro m a RAM car d. Note When you are not us ing a RAM car d, you shoul d write- protect it to a voi d acci dental dat a erasur e.
Studio Color LCD Controller RAM Card: O/S 7-9 7 4. Pr ess the Curs or <Down> arro w ke y to vie w the menu optio ns, then select /3;, , as sho wn belo w: If the me ssage L-.
7-10 RAM Card: O/S Stud io Color LC D Control ler Restoring the Operating System from a RAM Card This sec tion d escribes ho w to i nstall an oper ating sys tem from a RAM card to the c ont ro ller . Y ou s hould use th is procedur e if you a re ins tallin g an updated or re placement (same v ers ion) oper ating system.
Studio Color LCD Controller RAM Card: O/S 7-1 1 7 7. Pr ess the < Erase> ke y again to cont inue, o r press t he <Selec t> ke y to c ancel. If you pre ss the <Erase> ke y , the LCD di splay appears as sho wn belo w: Caution Do not turn controll er power off while the RAM card is transferring information.
7-12 RAM Card: Write-Pro tection Stud io Color LC D Control ler RAM Card: W rite-Protection After ba cking u p either the ope rating s ystem or memory to the RAM ca rd, you s hould writ e-prote ct tha t card t o pre v ent it from b eing inadver tentl y eras ed.
Studio Color LCD Controller IBM-Compat ible 7-1 3 7 IBM- Comp atibl e This sec tion d escribes ho w to b ack up a nd restor e the control ler’ s pages , memorie s and prese ts using an IBM- compatib le per sonal comput er .
7-14 IBM-Compat ible Stud io Color LC D Control ler Y ou c an use a DB9 t o DB25 a dapter if the fema le en d of your serial cable doe s not ma tch your co mputer’ s s erial po rt. Make su r e you do not u se a nul l modem ad apter , since t hat will pr e vent the c ontroll er from communi cati ng with your computer .
Studio Color LCD Controller IBM-Compat ible 7-1 5 7 Initial Se tup Y ou must follo w t he procedu re bel o w backing u p control ler memory to a personal c omputer , or res toring pa ges, memories a nd preset s from a per sonal computer to the control ler .
7-16 IBM-Compat ible Stud io Color LC D Control ler 6. Th e menu sho ws the currentl y-select ed opt ion in re ve rse video; in Figur e 7-3, the selec ted opti on is Help . 7. Us e your comput er’ s <Up> and <Down> arro w keys to s elect Setup and pre ss <Enter > .
Studio Color LCD Controller IBM-Compat ible 7-1 7 7 10. Now see one of the fo llo wing s ectio ns: • “Backing Up (Do wnloading) Memory to the Comput er” on page 7- 17 • “Restoring (Upload in.
7-18 IBM-Compat ible Stud io Color LC D Control ler 2. Th e next menu gi ves you th e follo wing options whi ch are av ailable t hroughou t the res t of the p rocedu re. Use your computer’ s <Up> and <Down> arro w ke ys to s elect an o ption and pres s <Enter> .
Studio Color LCD Controller IBM-Compat ible 7-1 9 7 6. Pr ess and hol d the <Record> ke y (abou t 10 sec onds) on t he control ler’ s fro nt panel u ntil t he LCD displ ay sho ws the follo wing message: 7. The Li ghtwa ve Research Ba ckup menu shoul d no w displ ay an ident ical mess age.
7-20 IBM-Compat ible Stud io Color LC D Control ler V erif ying the T ra nsfer Make sur e the memory was ba cke d up pro perly usi ng either W indows F ile Mana ger (or Exp lorer) o r the DOS dir command. The f ile should be abo ut 256KB in si ze. If so , you are f inished.
Studio Color LCD Controller IBM-Compat ible 7-2 1 7 1. Us e your comput er’ s <Up> and <Down> arro w keys to s elect Computer ->Controlle r from the L ightw a v e Research Backup ma in menu, a s sho wn in Figure 7-6: Figure 7-6. Restori ng memory from a file store d on a computer to the contr o l ler .
7-22 IBM-Compat ible Stud io Color LC D Control ler 3. Fi rst, sel ect the d ri v e where the bac kup f ile is l ocate d. The current dri ve is displ ayed at t he top o f the menu ( by d efaul t, C: ). Use the opti ons sho wn in Step 2 to c hange the d ri v e, if nece ssary .
Studio Color LCD Controller IBM-Compat ible 7-2 3 7 9. A mes sage is di splayed o n the Li ghtw av e Back up softw are menu when th e tran sfer is complete.
7-24 Macintosh Stud io Color LC D Control ler Macintosh This sec tion d escribes ho w to b ack up a nd restor e the control ler’ s page s, memories an d prese ts using a Macint osh persona l comput er .
Studio Color LCD Controller Macintosh 7-2 5 7 3. Con nect the Mac -to-mo dem cable to the DB25 e nd of the adapter . Se e Figur e 7-7: Figure 7- 7. Connect ing a Maci ntosh t o the controller for download/ upload.
7-26 Macintosh Stud io Color LC D Control ler desc ri bed in the s ect ion t it le d “Co nnec ti ng the Comput er and Controll er” on pag e 7-24. 1.
Studio Color LCD Controller Macintosh 7-2 7 7 1. T oggle the <Standb y> k e y on the controll er’ s front panel until the Sta ndb y LED turns ON. 2. Pr ess and hol d the <Record> ke y on the contr oller’ s fr ont panel un til t he LCD displa y appea rs as s ho wn belo w: 3.
7-28 Macintosh Stud io Color LC D Control ler V erif ying the T ra nsfer Open the Ge t Info windo w on th e f ile you just c aptured t o mak e sure the f ile is about 2 56KB in size .
Studio Color LCD Controller Macintosh 7-2 9 7 2. Y our computer screen sh ould di splay the follo wing message: Restor e to co ntr oller fr om PC. Send data t o contr oller no w . Pre ss SELECT to quit anytime. 3. Pr ess Command+Y to send a te xt f il e.
7-30 Crossloading Stud io Color LC D Control ler If the pages are not pro grammed as you ex pected , fi rst op en the G et Info wind ow on the b ack up file. If th e file wa s less than 256KB i n size, i t did n ot contai n all of t he cont roller ’ s memories a nd pages.
Studio Color LCD Controller Crossloading 7-3 1 7 If you do not ha v e a nul l modem cable , you will n eed the follo wing (see Figur e 7-8 on pa ge 7-31) : • One standard DB9 female-t o-DB9 m ale seri al cab le.
7-32 Crossloading Stud io Color LC D Control ler Consult Ap pendix C for a com plete se lecti on of cabl ing and connect or wiring d iagra ms. Crossload Proced ure The so ur ce controll er is the one you want to t ransf er data fr om ; the dest inati on contro ller is the one you wa nt to transf er data to .
Studio Color LCD Controller Crossloading 7-3 3 7 the amount of data y ou cros sload. 5. Th e LCD display of the des tinat ion contr oller sh o ws the following w hen the tra nsfer is comp l ete: 6.
7-34 Crossloading Stud io Color LC D Control ler.
Studio Color LCD Controller Glossary G-1 Glossary Access M odes The c on troll er offers th e foll o win g t wo remo te acces s mode s: • Pag e access: An attach ed anal og control ler acce sses page s in memor y . See Ch apte r 6 for mor e i nforma t ion.
G-2 Glossar y Stud io Color LC D Control ler All-Mem ory P layback When used wit h au to adv ance, allo ws you to play back a ll 99 pages in all n ine memories . (Only initial ized, or programmed, pages wi ll play b ack.) I f used wit h rando m adv ance , pages play ba ck in rando m order .
Studio Color LCD Controller Glossary G-3 Crossloading T ransferring memor ies, pages and pre sets dir ectly fr om one contr oll er to an o the r . Also refer s to t ra nsf er ring fir m ware from one St udio Col or f ixtu re to oth er f ixtur es on the same DMX link.
G-4 Glossar y Stud io Color LC D Control ler result ant color s are more richl y-satur ated than is pos sible with a ge l. Dich roics are cu rrent ly used for al l Stud io C olor c olor m ixing wheels an d th e color whee l di chr oi c f i lt er s.
Studio Color LCD Controller Glossary G-5 Fixture Number (Call ed addr ess by s ome LCD control lers.) A unique number , 1 throu gh 8, that y ou assi gn to each f ixture connect ed to the c ontrol ler . (Th e terms addr ess and fix t u re are basic ally interchang eable.
G-6 Glossar y Stud io Color LC D Control ler Each DMX 512 lin k can ha v e up to 32 de vices or s pan 500 f t (153 m). A s eria l data dist ri b uto r mus t b e us ed to e xt end an y link be yon d those li mits. See also “DMX 512” and “Serial Data Dis trib utor ”.
Studio Color LCD Controller Glossary G-7 Master Dim A setti ng for f ixture i ntens ity (dim) that af fe cts all connect ed f ixtures. Mast er dim can b e set i n one of t he follo wing ways: • By sett ing th e Inte nsi ty value on the co ntro ller ’ s fron t pane l.
G-8 Glossar y Stud io Color LC D Control ler Non-initialized Page See “U n-in itial ized Page”. Page The basic progr amming uni t, consis ting of addresse s (fixtures ), co nstru c ts and their p arame ters (valu es). Th e control ler’ s memory c an contai n up to 8 91 pages—99 pages in each of 9 memori es.
Studio Color LCD Controller Glossary G-9 Pres et Acc ess See “ Access Mo des”. Preset Banking Allo ws you to access up to 1024 pr es ets from t he con tr ol ler ’ s front p anel. Th e control ler has 1 28 banks of preset s; ea ch of the 8 Pre set k eys can be u sed as a separat e preset in eac h bank fo r a tot al of 1 024 pres ets.
G-10 Glossar y Stud io Color LC D Control ler RAM Card Another n ame for a PC Car d ( nee PCMCIA, Personal Computer Memory Car d Interna tional As sociati on). The Studio Col or LCD controll er uses a T yp e 1, 256KB SRAM PC Card. The RAM card pro vides you with th e means to backup or store the cont roller’ s memor y in a remo vable de vice .
Studio Color LCD Controller Glossary G-11 • The end-to-end cable s pan (the t otal le ngth of all cabl es) on an y link excee ds 500 f t. (153 m). See also “Link” . Show Control A protoco l (langua ge) th at allo ws a var iety of d if fere nt typ es of de vi ces to be contro lled fro m a centr al sourc e, such a s a lighti ng console .
G-12 Glossar y Stud io Color LC D Control ler Standby In Stand by , all f ixt ures’ shu tters cl ose an d any i n-pro gress wheel or ef fect changes stop imme diately .
Studio Color LCD Controller Glossary G-13 T welve-Level Preset Ac cess See “P rese ts”. Un-initialized Page An un -init iali ze d pag e ac ts as a “ p lac eh old e r” to in dic a te th e begi nning and end of a chase o r loop.
G-14 Glossar y Stud io Color LC D Control ler.
Studio Color LCD Controller Binary Access Table A-1 A Appendix A Binary Access Table The b in ary value s l isted in T able A -1 equ a te to th e first 10 channel s of analo g input channels 1 to 12, wi th th e least signif ica nt binar y bit bei ng channel 1.
A-2 Binary Acce ss Table Stud io Color LC D Control ler chann els corr esponding to binar y 1s a nd disabl e channels corres ponding to binary 0s. F or more details , see t he next sect ion. Using Binary Preset Ac ces s 1. Cho ose a pres et number . 2.
Studio Color LCD Controller Binary Access Table A-3 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 2.
A-4 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1.
Studio Color LCD Controller Binary Access Table A-5 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 2.
A-6 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1.
Studio Color LCD Controller Binary Access Table A-7 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 2.
A-8 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1.
Studio Color LCD Controller Binary Access Table A-9 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 2.
A-10 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-11 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-12 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-13 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-14 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-15 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-16 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-17 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-18 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-19 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-20 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-21 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-22 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-23 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-24 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-25 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-26 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-27 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-28 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-29 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-30 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-31 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-32 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-33 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-34 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Binary Access Table A-35 A T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber 1 .
A-36 Binary Acce ss Table Stud io Color LC D Control ler T able A-1. P resets, Preset L e v els, and Ana log Input C hannels Pre- set No. Pre- set key Pre- set level Analog Controller Channel Num ber .
Studio Color LCD Controller Cons t ru c t Pa ra me t e rs B-1 B Appendix B Construct Parameters T able B-1 belo w lists the a vail able const ructs for t he Stud io Colo r L CD co ntrol ler , thei r para meter values and de faults.
B-2 Construct Parameters Stud io Color LC D Control ler Color 1—6 (color whee l positi on) forwa rd spi n speed 1 (slowest ) th ru 16 (fastes t) cyc le spe ed 1 (slo west) thru 1 6 (faste st) rev er.
Studio Color LCD Controller Cons t ru c t Pa ra me t e rs B-3 B T able B-2 belo w li sts the v alues for t he Color co nstruc t and ho w those v alues a re displ ayed when you “vie w” a fixt ure as descri bed in t he secti on titl ed “V ie wing Fi xture s” on page 4-25.
B-4 Construct Parameters Stud io Color LC D Control ler Note Other v alu es are pos sible for co ntinuo us colo r combinat ions “b etween” th ose li sted abo v e. F or ex ample, if you selec t the fol lo wing v alue for continu ous col or (“betwe en” 1/ 2 and 2) the displ ay will re ad K .
Studio Color LCD Controller Pinouts and Wiring Di agrams C-1 C Appendix C Pinouts and Wiring Diagrams This Ap pendix li sts connec tor pinouts a nd sho ws ho w to wir e v ariou s types of cabli ng you can us e to back u p and re store control ler memo ry to a per sonal comput er , or to cro ssload memory betwe en control lers.
C-2 Pinouts and Wiring D iagrams Stud io Color LC D Control ler Connector Pin Numbering Figure C- 2 sho ws ho w pins are numbere d on DTE connect ors: Figure C-2. Pin numbering system used for wiring cabling. The male DI N-8 connect or is for a Mac intosh ca ble.
Studio Color LCD Controller Pinouts and Wiring Di agrams C-3 C IBM- Comp atibl e Wir ing Di ag rams Figure C- 3 sho ws wir ing dia grams for IBM-compat ible systems: Figure C- 3. Wi ring cabl es for bac king up or restori ng cont roller me mory using an IBM- com pat ible ma c h in e .
C-4 Pinouts and Wiring D iagrams Stud io Color LC D Control ler Macintosh W iring Diagrams Figure C- 4 sho ws wir ing dia grams for Macintos h systems: Figure C- 4. Wi ring cabl es for bac king up or restori ng cont roller me mory using a Macintosh. Note Male c onnect ors are sh o wn fo r simp licity .
Studio Color LCD Controller Important Sa fety Info rm at ion D-1 D Appendix D Important Safety Information W ARNING: For Continued Protection Against Fire 1. Th is equi pment is design ed for c onnect ion to a b ranch c ircuit ha ving a ma ximum ov erload protecti on of 20 A.
D-2 Important Safety Information Stud io Color LC D Control ler Appendice D Important: Informations De Sécurité MISE EN GARDE: Pour Une Protection P ermanente Contre Le s Ince ndies 1. Ce t équipement est conçu pour c onne xion à un c ircuit de déri v ation ayant une protect ion de su rchar ge maximum de 20 A.
Studio Color LCD Controller Important Sa fety Info rm at ion D-3 D Anhang D Wichtige Sicherheitshinweise W ARNUNG: Zu m Schutz vor Brandgefahr 1. Di eses Gerät ist für den Ansc hluß an ei n Stromne tz mit einem Über lastu ngsschutz v on höchste ns 20 A bes timmt.
D-4 Important Safety Information Stud io Color LC D Control ler Apéndice D Información Importante De Seguridad AD VER TENCIA: Para Protección Continu a Contra Incendios 1. Es te equipo está d iseñado pa ra cone ctarse a un circui to deri v ado con protec ción máxima c ontra aflujos de al menos 20 amperi os.
Studio Color LCD Controller Important Sa fety Info rm at ion D-5 D Appendice D Información Importante De Seguridad A VVERTENZA: Per Pr ev enire Incendi 1. Que sto appar ecchio può esser e connes so ad un ci rcuit o ramif icat o con una pro tezione d i massima di 20A.
D-6 Important Safety Information Stud io Color LC D Control ler Appendiks D Vigtig Sikkerhedsin- formation: DANMARK.
INDEX Studio Color LCD Controller Index 1 A Accessor ies 1-6 <Add ress> /<Pre set> key 4-10 Addr ess (f ixtur e) parame ter copy 6-5 t o 6-8 Address mod e 3-4, 4-2 Address/ Preset ke ys 3-.
2 Index Stud io Color LC D Control ler Build i ng cab ling backup/r estor e C-3 to C- 4 XLR 2-14 to 2 -16 C Cabling backu p/restor e diagrams 7-14, 7-25, C- 3 to C-4 pinouts C-1 to C- 4 XLR connect io.
Studio Color LCD Controller Index 3 Red 3-9 XFade 3-14 Cont rolle r. See Studio Col or LCD control ler Copying blocks 4 -16 to 4-17 pages 4- 13 para mete rs 6-5 to 6-8 Crosslo ading firmwa r e 2-11 me.
4 Index Stud io Color LC D Control ler Erasing a page 4- 27 all User keys 6-14 memories 5-14 preset s 4-20 single User ke y 6-12 Examples master /slav e cont rolle rs 2- 18 normal an d double color mi.
Studio Color LCD Controller Index 5 K Keys <Add ress> /<Pre set> 4-1 0 <Audio > knob 6-27 <Auto> 4-18 <Blu e> 3-9 <Col or> 3-15 Construc t <Up > and <Down&.
6 Index Stud io Color LC D Control ler Memories 4-2 all-memor y playback 5-11 erasin g 5-14 locking or unlocking 5-12 positi on pr ese ts (memor y 9) 6-3 to 6-5 Memory backing up IBM 7-17 to 7-2 0 Mac.
Studio Color LCD Controller Index 7 Pinouts Analog In puts po rts 6-15 backu p/restor e cabl ing C-1 to C-4 control ler RS -232C port C-1 XLR cablin g 2-15 Playback mode 4-2 Playing back audio ad vanc.
8 Index Stud io Color LC D Control ler revers e block co py 4-16 to 4- 17 select ing fi xture s 4-11 steps 4 -10 to 4 -12 un-ini tialize d page 4 -14 viewing 4 -25 Proport ional level sub masters 6- 2.
Studio Color LCD Controller Index 9 ; )) ) ) 6-6 Shipp ing mate rial s 1-2 Show contr ol 5-8 to 5-10 , 6-31 .
10 Index Stud io Color LC D Control ler Flip con struct 3 -11 frequen cy 2-6 fuse hol der 1-9 fuse, re placing 1 -9 Gate cons truct 3-9 Green con struc t 3-9 help intro-6 homing fi xture s 4-29 independ ent pr esets 2-7 Intens ity fi eld 4-28 keys for progr amming 4-10 key s.
Studio Color LCD Controller Index 11 12-l evel preset access 2-7, 6- 19 t o 6 -20 un-ini tialize d page 4 -14 unlo cking a fi xture 5-13 unlo cking/loc king memori es 5-1 2 unpac king 1-2 User keys 6-.
12 Index Stud io Color LC D Control ler Viewing f ixtures 4-25 Vigtig Si kkerh edsinfor mation DANMARK D-6 Voltage selecti on swit ch 1-9 Voltage, setting 1-7 to 1-9 Voltages 1-3 W White Knig ht 7-25 .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il High End Systems High End LCD Controller for Studio Color è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del High End Systems High End LCD Controller for Studio Color - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso High End Systems High End LCD Controller for Studio Color imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul High End Systems High End LCD Controller for Studio Color ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il High End Systems High End LCD Controller for Studio Color, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del High End Systems High End LCD Controller for Studio Color.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il High End Systems High End LCD Controller for Studio Color. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo High End Systems High End LCD Controller for Studio Color insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
