Manuale d’uso / di manutenzione del prodotto EEG-144 del fabbricante Henny Penny
Vai alla pagina of 72
OPERA T OR’S MANUAL REGISTER W ARRANTY ONLINE A T WWW .HENNYPENNY .COM Henny Penny Evolution Elite ™ Reduced Oil Cap acity Open Fryers (S plit V at & Full V at– Gas ) Model EEG-141 Model EEG.
.
Model EEG-141, 142, 143, 144 To avoid a fire, ke ep appliance area f ree and clear from combust ibles. Improper installat ion, adjustment, al terati on, se rvi c e, or maintenan ce can cause prop erty damage, injury , or death.
Model EEG-141, 142, 143, 144 T echnical Data for CE Marked Products Nominal Heat Input: Natural (I2H) = 19,8, kW (67,560 Btu/h) (Net) Natural (I2E) = 19.8 kW (67,560 Btu/h) Natural (I2E+) = 19.8 kW (67,560 Btu/h) Natural (I2L) = 19.8 kW (67,560 Btu/h) Natural (I2HS) = 19.
LIMITED W ARRANTY FOR HENNY PENNY EQUIPMENT Subject to the following conditions, Henny Penny Corporation makes the following limited warranties to the original purchaser only for Henny Penny appliance.
Model EEG-141, 142, 143, 144 T ABLE OF CONTENTS Section Page Section 1. INTRODUCTION .................................................................................................... 1- 1 1-1 Introduction ...........................................
Model EEG-141, 142, 143, 144 T ABLE OF CONTENTS (Continued) Section Page Section 4. LEVEL 1 PROGRAMMING ........................................................................... 4 - 1 4-1 Modifying Product Settings ..................................
.
Model EEG-141, 142, 143, 144 1-1. INTRODUCTION The Henny Penny open fryer is a basic unit of food processing equipment designed to cook foods better and easier . The micro computer-based design helps make this possible. This unit is used only in institutional and commercial food service operations, and operated by qualified personnel.
Model EEG-141, 142, 143, 144 1-4. ASSIST ANCE Should you require outside assistance, call your local independent distributor in your area, or call Henny Penny Corp. at 1-800-417-8405 or 1-937-456-8405. 1-5. SAFETY The Henny Penny open fryer has many safety features incorporated.
Model EEG-141, 142, 143, 144 1-5. SAFETY (Continued) Equipotential Ground Symbol W aste Electrical and Electronic Equipment (WEEE) Symbol Shock Hazard Symbols Hot Surface Symbols OR OR 6 0 9 1 -3.
.
Model EEG-141, 142, 143, 144 SECTION 2. INST ALLA TION This section provides the installation and unpacking instructions for the Henny Penny Evolution Elite fryer .
The proper location of the fryer is very important for operation, speed, and convenience. The location of the open fryer should allow clearances for servicing and proper operation. Choose a location which will provide easy loading and unloading without interfering with the final assembly of food orders.
Model EEG-141, 142, 143, 144 The fryer should be located with provision for venting into an adequate exhaust hood or ventilation system. This is essential to permit efficient removal of the steam exhaust and frying odors. Special precaution must be taken in designing an exhaust canopy to avoid interference with the operation of the fryer .
Model EEG-141, 142, 143, 144 2-6. GAS SUPPL Y (Continued) • The fryer and its manual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 PSIG (3.45 kPa) (34.
Model EEG-141, 142, 143, 144 609 2-5 2-6. GAS SUPPL Y (Continued).
Model EEG-141, 142, 143, 144 2-7. GAS LEAK TEST 2-8. GAS PRESSURE REGULA T OR SETTING 2-9. ELECTRICAL REQUIREMENTS Prior to turning the gas supply on, be sure the gas valve knob on the gas control valve is in the off position. Upon initial installation, and after moving the unit, the piping and fittings should be checked for gas leaks.
Model EEG-141, 142, 143, 144 2-9. ELECTRICAL REQUIREMENTS (Continued) T o avoid electrical shock, do not disconnect the ground (earth) plug. This fryer must be adequately and safely grounded (earthed).
Model EEG-141, 142, 143, 144 2-12. DIMENSIONS 2-8 510.
.
Model EEG-141, 142, 143, 144 Figure 3-1 3-1 1009 SECTION 3. OPERA TION 3-1. OPERA TING COMPONENTS Refer to explanations on the next pages. 12 6 45 7 38 9 13 11 12 14 10 Figure 3-2 15 16 17 Figure 3-3 .
Model EEG-141, 142, 143, 144 809 3-2 Fig. Item Description Function No. No. 3 - 1 1 This LED lights when the control calls for heat for the left vat(s), and the burners ignite and heat the oil 3 - 1 2.
Model EEG-141, 142, 143, 144 3-3 1009 3-1. OPERA TING COMPONENTS (Continued) Fig. Item Description Function No. No. 3 - 1 9 Press to turn on and off the heat system for the left vat(s); on full vats e.
Model EEG-141, 142, 143, 144 Fig. Item Description Function No. No. 3 - 4 1 Filter Drain Pan Assy . Oil is drained into this pan and then is pumped through filters to help prolong the use of the oil 3.
Model EEG-141, 142, 143, 144 3-5 809 3-2. SET -UP MODE Upon initial start-up, the controls will ask to confirm the settings for the fryer . When the main power switch is turned on, “OFF” shows in both displays. Press on either side and *SETUP* *ENTER CODE* shows in the displays.
Model EEG-141, 142, 143, 144 3-3. FILLING OR ADDING OIL The oil level must always be above the burner tubes when the fryer is heating and at the oil level indicators on the r ear of the vat. Failure to follow these instructions could r esult in a fire and/or damage to the fryer .
Model EEG-141, 142, 143, 144 1. Make sure basket support is in vat and vat is filled with oil to the proper level. Model EEG-141, fill the oil reservoir . See Section 3-10. 2. Move power switch to the ON position and then press to turn on heat for the desired vat.
Model EEG-141, 142, 143, 144 809 3-8 3-5. BASIC OPERA TION 1. Once out of the Melt Cycle, LOW TEMP flashes until the set- point temperature has been reached. Once the set-point temperature has been reached, the product name now shows in the display , ex: FR Y , and product now can be placed in the oil.
Model EEG-141, 142, 143, 144 3-9 510 During normal operation, the control automatically monitors the oil level in the vat. If the control senses the oil level too low , the unit automatically pumps oil from the JIB into the vat to keep the oil at the proper level.
Model EEG-141, 142, 143, 144 Filling Oil Reservoir 1. Control displays “JIB IS LOW” and an alarm sounds. 2. Open door and pull reservoir forward and remove reservoir cover . Figure 1. 3. Place on bracket on door . Figure 2. 4. Pour oil into reservoir upto the fill lines (13 lbs.
Model EEG-141, 142, 143, 144 3-1 1. SMAR TFIL TER EXPRESS ™ 1 . During normal operation and after a certain number of cook cycles, the Filter Beacon ® illuminates on the front of the fryer (Figure 1), and the control periodically shows “FL TR NOW?” “YES NO”.
Model EEG-141, 142, 143, 144 6. If the oil has not pumped back to the proper level in the vat during the SmartFilter Express™ process, press X button for NO and pump runs for another 30 seconds.
Model EEG-141, 142, 143, 144 3-13 809 This filtering procedure allows for a more thorough cleaning of the vat and should be done once a day . The vat can be filtered during any non-frying times. T o avoid burns fr om hot oil, use approved safety equip- ment including, apron, face shield and gloves before starting filtering procedure.
Model EEG-141, 142, 143, 144 809 3-14 7. Scrape or brush the sides and the bottom of the vat. Be careful not to damage the sensing probes. Do not use steel wool, other abrasive cleaners or cleaners/ s.
Model EEG-141, 142, 143, 144 3-15 809 3-13. DISCARDING OIL FROM V A T USING OPTIONAL OIL DISCARD SHUTTLE WITH PROLONGED USE, THE FLASHPOINT OF OIL IS REDUCED. DISCARD OIL IF IT SHOWS SIGNS OF EXCESSIVE SMOKING OR FOAMING . SERIOUS BURNS, PERSONAL INJURY , FIRE, AND/ OR PROPER TY DAMAGE COULD RESUL T .
Model EEG-141, 142, 143, 144 Figure 1 Figure 2 3-14. DISCARDING OIL FROM V A T USING OPTIONAL BULK OIL DISPOSE SYSTEM 1009 3-16 1. Connect the female quick disconnect, that is attached to the hose in the rear of the open fryer , to the correct male quick disconnect at the wall.
Model EEG-141, 142, 143, 144 3-15. CHANGING THE FIL TER P AD In order to assure good oil pumping performance, the filter pad (or paper) should be changed at least once per day . If the filter pad has not been changed, a reminder shows on the display , “CHANGE P AD”.
Model EEG-141, 142, 143, 144 3-15. CHANGING THE FIL TER P AD (Continued) 5 . Remove the filter pad retaining ring and clean thoroughly with soap and water . Rinse thoroughly with hot water . Figure 5. 6. Pull the filter pad from the pan and discard pad.
Model EEG-141, 142, 143, 144 3-15. CHANGING THE FIL TER P AD (Continued) Be sure that the drain pan, bottom screen, crumb catcher , and the retaining ring are thoroughly dry before placing filter pad into pan as water will dissolve the filter pad.
Model EEG-141, 142, 143, 144 609 3-20 3-17. CLEAN-OUT MODE The filter drain pan must be as far back under fryer as it will go, and the cover in place. Be sure the filter drain pan is latched into place and the hole in the cover lines up with the drain before opening the drain.
Model EEG-141, 142, 143, 144 3-21 609 Display shows “IS DISPOSAL UNIT IN PLACE?” “YES NO”. If “NO” is selected, display shows “INSER T DISPOSAL UNIT”. Once disposal unit is in place press √ √ √ √ √ button for YES, open drain, and display shows “DRAINING” and oil drains from vat.
Model EEG-141, 142, 143, 144 609 3-22 1 1. Return empty filter drain pan to fryer and press √ √ √ √ √ button. Display then shows “V A T EMTY” “YES NO”. 12 . Once vat is empty , press √ √ √ √ √ button and display shows “SCRUB V A T COMPLETE” “YES NO”.
Model EEG-141, 142, 143, 144 3-23 609 3-18. CHECK/REPLACE FIL TER DRAIN PAN O-RINGS T o prevent oil leaking, and to keep filtering process operating properly , the filter drain pan o-rings should be inspected for nicks and tears at least every 3 months.
Model EEG-141, 142, 143, 144 609 3-24 3-19. INFO BUTT ON ST A T S Actual Oil T emperature 1. Press and the actual oil temperature shows in the display , for each vat. Set-point T emperature 2. Press twice and SP shows in the display , along with the set-point (preset) temperature of each vat.
Model EEG-141, 142, 143, 144 3-25 609 As in all food service equipment, the Henny Penny open fryer does require care and proper maintenance. The table below provides a summary of scheduled maintenance procedures to be performed by the operator .
Model EEG-141, 142, 143, 144 T o ensure proper burner operation, clean the blowers and blower vents twice a year . 1. Press the main power switch to the OFF posistion. 2. Unplug power cord and turn the gas shut-off handle clockwise to turn off the gas, and then disconnect the gas line.
.
Model EEG-141, 142, 143, 144 609 4-1 SECTION 4. INFORMA TION MODE This historic information can be recorded and used for operational and technical help and allows you to view the following: • 1. E-LOG • 2. LAST LOAD • 3. DAIL Y ST A T S • 4. OIL ST A TS • 5.
Model EEG-141, 142, 143, 144 4-2 609 2. LAST LOAD (Information on recent cook cycles) Press and “2. LAST LOAD” show in displays. Press a timer button or for the product you want to view the cook data and the LED flashes. Press button to start viewing the cook data.
Model EEG-141, 142, 143, 144 609 4-3 4-1. INFORMA TION MODE DET AILS (Continued) 3. DAIL Y ST A TS (Operational info of fryer for last 7 days) Press and “3. DAIL Y ST A TS” show in displays. Press button to start viewing the cook data. Press the right t o view data for other days of week.
Model EEG-141, 142, 143, 144 4-4 609 Start date of new oil (L/R) NEW OIL MAR-23 Number of days oil in use (L/R) OIL USE 4 DA YS Number of filters on this oil (L/R) FIL TERED 4 Number of times filter skipped (L/R) SKIPPED 0 Number of cook cycles on this oil (L/R) TOT CK 3 8 A verage number of days per oil change (L/R) A VG DA YS PER OIL CHANGE 13.
Model EEG-141, 142, 143, 144 609 4-5 Day the usage data was previously reset SINCE APR-19 3:00P Number of Hours the fryer was on (L/R) ON HRS 4 Number of times filtered (L/R) FIL TERED 4 Number of tim.
Model EEG-141, 142, 143, 144 5-1 609 This mode allows you to program the following: 1. Press and hold button until “PROG” shows in the display , followed by “ENTER CODE”. 2. Enter code 1, 2, 3 (first 3 product buttons). “PRODUCT” an d “PROGRAM” show in the displays, followed by “SELECT PRODUCT’ and “-P 1-” (ex: NUG).
Model EEG-141, 142, 143, 144 T o Change Times and T emperatur es 7. Press button until “COOK TIME” shows in the display , and then use the product buttons, or the an d buttons, to change the time in minutes and seconds, to a maximum of 59:59.
Model EEG-141, 142, 143, 144 Mixed Filter T racking Filter After X Number of Loads 13b. Press button until “FIL TER AFTER...” flashes in the left display along, and the number of cook cycles between filters shows in the right display . Press the product buttons, or the and buttons, to change this value of 0 to 99 loads.
Model EEG-141, 142, 143, 144 1009 6-1 SECTION 6. LEVEL 2 PROGRAMMING The Special Program Mode is used to set more detailed programming, such as: SP-1 • Degrees Fahrenheit or Celsius SP-2 • Languag.
Model EEG-141, 142, 143, 144 Press and hold the button for 5 seconds until “LEVEL 2” followed by , “SP PROG” and “ENTER CODE” show in the display . Enter code 1,2,3, and “SP-1”, “TEMP”, “FORMA T” show in the displays. If a bad code is entered, a tone sounds and “BAD CODE” shows on the display .
Model EEG-141, 142, 143, 144 Audio T one (SP-5) Press button and “SP-5” and “TONE” flash in the left display . Press the or , or use product buttons, to adjust the tone of the speaker , 2000 being the maximum value and 50 the minimum.
Model EEG-141, 142, 143, 144 Filter T racking Mode (SP-8) Filter T racking signals the operator when the oil needs filtering by counting the number Cook Cycles between filters Press button and “SP-8” and “FIL TER TRACKING MODE” show in the display .
Model EEG-141, 142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) Filter T racking Mode (SP-8) (Continued) GLOBAL If GLOBAL is selected, press button. Split V at If unit is a split vat, “SP-8A” and “LEFT V A T FIL TER CYCLES” shows in the left display , and the number of cook cycles between filters shows on the right display (0 to 99).
Model EEG-141, 142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) Polish Duration (SP-9) Press button and “SP-9 POLISH TIME” flashes in the left display .
Model EEG-141, 142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) 2nd Language (SP-16) Press button and “SP-16 2ND LANGUAGE” flashes on the left display . Press the or buttons to select the desired 2nd language. By setting a 2nd language in the controls, 2 languages can now be chosen by pressing button during normal operation.
Model EEG-141, 142, 143, 144 6-1. SPECIAL PROGRAM MODE (Continued) Autolift Enabled (SP-21) Press button and “SP-21 AUTOLIFT ENABLED?” flashes in the left display .
Model EEG-141, 142, 143, 144 Program Code Change (SP-25) (Continued) If satisfied with code, press and “*CODE CHANGED*” shows in display . If not satisfied with code, press and “*CANCEL” shows in display , then reverts back to “SP-25” and “CHANGE, MGR CODE? 1=YES”.
Model EEG-141, 142, 143, 144 6-2. CLOCK SET 1. Press and hold the button for 5 seconds until “LEVEL 2”, followed by , “SP PROG” and “ENTER CODE” show in the display . 2. Press the button again and “CLK SET” and “ENTER CODE” flash in the left display .
Model EEG-141, 142, 143, 144 SECTION 7. TROUBLESHOOTING 7-1. TROUBLE SHOOTING GUIDE Problem Cause Correction POWER switch ON but fryer completely inoperative Control error code “E-10” V at is unde.
Model EEG-141, 142, 143, 144 7-1. TROUBLE SHOOTING GUIDE (Continued) Oil foaming or boiling over top of vat Oil will not drain from vat Filter motor runs but pumps oil slowly Bubbles in oil during ent.
Model EEG-141, 142, 143, 144 7-2. ERROR CODES In the event of a control system failure, the digital display shows an error message. The message codes are shown in the DISPLA Y column below . A constant tone is heard when an error code is displayed, and to silence this tone, press any button.
Model EEG-141, 142, 143, 144 7-2. ERROR CODES “E-20-A” • Pressure Switch • If fan is not running, have pressure switch checked; should be “F AN SENSOR failure open circuit if no air pressure.
.
*FM05-057- * Henny Penny Corp., Eaton, Ohio 45320, Revised 5-28-10 Henny Penny Corporation P .O.Box 60 Eaton,OH 45320 1-937-456-8400 1-937-456-8402 Fax T oll free in USA 1-800-417-8417 1-800-417-8434 Fax w w w.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Henny Penny EEG-144 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Henny Penny EEG-144 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Henny Penny EEG-144 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Henny Penny EEG-144 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Henny Penny EEG-144, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Henny Penny EEG-144.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Henny Penny EEG-144. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Henny Penny EEG-144 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
