Manuale d’uso / di manutenzione del prodotto TWILIGHT-II del fabbricante Heat & Glo LifeStyle
Vai alla pagina of 37
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 1 Model: T wilight-II* Owner ’ s Manual Installation and Operation * Does not ship with interior or exterior door , or TL-Trim kit. These items must be purchased separately.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 2 Congratulations Listing Label Information/Location Model Name: ___________________________________________ Date p.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 3 - T able of Contents - Section 8: Finishing A . Mantel Projections ................................... 1 8 B . Facing Material .....................................
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 4 B. Glass Specifications Hearth & Home T echnologies appliances manufactured with tempered glass may be installed in hazardous locations such as bathtub enclosures as defined by the Consumer Product Safety Commission (CPSC).
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 5 A. Design and Installation Considerations Heat & Glo direct vent gas appliances are designed to op- erate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 6 3 Framing and Clearances NOTE: • Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONL Y. • I llustrations/diagrams are not drawn to scale.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 7 B. Clearances Figure 3.3 Clearances to Combustibles Fire Risk. • Locate and install appliance to all clearance specifications in manual W ARNING Fire Risk. Odor Risk.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 8 C. Mantel Projections - Interior only Figure 3.4 Indoor Clearances to Mantels or other Combustibles above Appliance Figure 3.5 Indoor clearances to Mantel Legs or Wall Projections (Acceptable on both sides of opening.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 9 T ermination Locations 4 ___________________________________________________________________________ ____________.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 10 The diagram shows how to properly position, level, and se- cure the appliance (see Figure 5. 2). Nailing tabs are provid- ed to secure the appliance to the framing members.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 11 • See Figure 5.3 for placement of combustible housewrap or building paper and non-combustible sheathing for the outside wall.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 12 NOTE: Have the gas supply line installed in accordance with local building codes, if any . If not, follow ANSI 223.1. Installation should be done by a qualified installer approved and/or licensed as required by the locality .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 13 W ARNING Fire hazard. Do NOT change the valve settings. • This valve has been preset at the factory . • Changing valve settings may result in fire hazard or bodily injury .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 14 A. Recommendation for Wire This appliance requires 1 10-120 V AC be wired to the junction box for proper operation of the appliance.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 15 Wall Switch Position the wall switch in the desired position on a wall. Run a maximum of 25 feet (7.8 m) or less length of 18 A.W .G . minimum wire and connect it to the appliance ON/ OFF switch pigtails.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 16 Figure 7.3 Intellifire Pilot Ignition (IPI) Wiring Diagram * NOTE: 1. Ignition module, valve, pilot, and wall switch operate on 3 volts. Uninterrupted 120 V AC is required at junction box unless equipped with battery back-up.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 17 E. Junction Box Installation F . W all Switch Inst allation for Fan (Optional) If the box is being wired from the OUTSIDE of the appliance: • Install the Romex ™ connector (not included with appliance) in the side wrap.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 18 A. Mantel Projections Figure 8.1 shows the minimum vertical and corresponding maximum horizontal dimensions of appliance mantels or other combustible projections above the top front edge of the appliance.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 19 Outside Facing Material Fire Risk. Finish all edges and fronts to clearances and specifications listed in manual. W ARNING • Black metal columns may be covered with non- combustible material only .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 20 Figure 8.5 Exterior View APPLIANCE HOOD TOP OF APPLI ANCE SOFF I T SIDING HOUSE W R AP (BUILD ING P A PE R) A ND.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 21 Appliance Setup 9 A. Remove Shipping Materials Remove shipping materials from inside or underneath the firebox. B. Clean the Appliance Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 22 E. Positioning the Logs Log Set Assembly: LOGS-TWI 1 2 2005-937D CAUTION: Logs are fragile! Carefully remove the logs from the packaging. Remove the metal supports which held the log box in place during shipping.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 23 STEP 4. LOG #3 (SRV2005-702): Position log #3 as shown by leaning it against log # 2 and resting the other end on the peak of the burner . Do not cover any port holes.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 24 STEP 8. LOG #7 (SRV703-703): Place log #7 on the grate tine between log #2 and log #5. Rest one end on the burner making sure not to cover any port holes. STEP 7. LOG #6 (SRV2077-701): Set log #6 onto the grate bar as shown.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 25 A. Before Lighting Appliance Operating Instructions 10 CAUTION If installing Intellifire ignition battery backup: • Do not install batteries if the backup mode may not be used for extended time.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 26 B. Lighting Appliance Intellifire Ignition Final Inspection by _________________________________ 1. Turn off all electric power to the appli- ance. 2. This appliance is equipped with an ig- nition device which automatically lights the burner .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 27 C. Af ter Appliance is Lit D. Frequently Asked Questions Initial Break-in Procedure When you light the appliance, you may notice that it pro- duces heat which does have an associated odor or smell.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 28 T roubleshooting 11 With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 29 Intellifire Ignition System - (continued) Sym pt om P ossibl e C auses Correct i ve Act i on s 3. C on t i n u ed d. Damaged pilot assem bl y or dirt y sen sor r od.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 30 Maint aining and Servicing Appliance 12 Although the frequency of appliance servicing and maintenance will depend on use and the type of installation, a qualified service technician should perform an appliance check-up at the beginning of each heating season.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 31 I nspect Mai nt en ance T asks Doors, Su r rou n ds an d Fr on t s 1. Assess c on di t i on of scr een an d r epl ace as n ecess ary . R ecom mend addi t i on of scr een i f on e i s not present .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 32 Reference Materials 13 Locati on In ch e s Millime te r Locati on In ch e s Millime te r A 4-3/ 4 121 J 36-1/ 4 .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 33 Part number list on following page. (NG , LP) Exploded Parts Diagram B.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 34 B. Service Parts List See following page for additional IPI service part numbers.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 35 14 (NG , LP) Exploded Parts Diagram Service Parts TWILIGHT -II Beginning Manufacturing Date: 6-05 Ending Manufac.
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 36 © 2005 Hearth & Home T echnologies Inc. C. Limited Lifetime W arranty LIMITED LIFETIME W ARRANTY HEA T & GLO GAS APPLIANCE PRODUCTS BASIC ONE-YEAR W ARRANTY .
Heat & Glo LifeS tyle Collection • T wilight-II • 2087-900 Rev . G • 12/05 37 Heat & Glo LifeS tyle Collection, a brand of Hearth & Home T echnologies Inc.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Heat & Glo LifeStyle TWILIGHT-II è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Heat & Glo LifeStyle TWILIGHT-II - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Heat & Glo LifeStyle TWILIGHT-II imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Heat & Glo LifeStyle TWILIGHT-II ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Heat & Glo LifeStyle TWILIGHT-II, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Heat & Glo LifeStyle TWILIGHT-II.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Heat & Glo LifeStyle TWILIGHT-II. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Heat & Glo LifeStyle TWILIGHT-II insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
